Networking :: Can't Print From Second Computer On WiFi Network
Aug 21, 2015
I have a network that has 3 laptops running Win 10. 2 of the computers (haven't checked the third yet) indicate they are on the same network SSID. One computer can print from the printers on the network.
The second laptop had the same printers and was able to print to them prior to Win 10. Now the SSID is the same as the first computer yet it can't print nor can it see any printers oe devices on the network!
View 4 Replies
Similar Messages:
Nov 15, 2015
I just installed Windows 10 upgrade to my HP laptop over Win 7. Every thing is fine but some thing strange happened.
All other WiFi connections in and around my apartment can be seen by Windows 10, except my WiFi network !! I can see a lot of SSDs in my area but can't see mine!
I can access my WiFi network from my desktop and my phone, but not from my HP laptop. Device Manager shows that my network adapter is Intel Centrino. There is, however, an exclamation mark over "Unknown Device" which needs a driver that Win 10 could not provide.
View 2 Replies
Nov 7, 2015
I have just bought a new windows 10 machine. It finds my home WIFI but fails to connect with the message "Can't connect to this network".
I have tried all the obvious issues such as re-booting (every component). I have several windows 7 machines and have checked the configuration of the wireless adaptors and there is nothing different around security, or 802 protocol selected etc. I have tuned off IP version 6 after reading some forums but get the same error.
My router is provided is provided by SKY is:
Manufacturer Sagemcom
Model Number F@ST2304
Firmware Version 7.16a4N
ADSL Firmware Version A2pD038m.d24h
Whenever I try to connect I get the following router system log:
Nov 7 15:09:11 (none) user.alert kernel: Intrusion -> IN=pppoa0 OUT= MAC= SRC=136.159.181.168 DST=2.125.174.9 LEN=60 TOS=0x00 PREC=0x00 TTL=50 ID=40139 DF PROTO=TCP SPT=45482 DPT=23 WINDOW=5840 RES=0x00 SYN URGP=0 MARK=0x8000000
My first experience with Windows 10 has been extremely frustrating and wasted a lot of time. I see that this is also a very common problem. Equally frustrating is the lack of diagnostic from Windows...I appear to have no way of knowing why the connection failed (hence why I have shown the router log).
View 6 Replies
Jul 3, 2015
you could connect to an hidden wifi network? or it's just my laptop?
View 9 Replies
Aug 8, 2015
I have a Compaq CQ61-410 Notebook. After upgrading to Windows 10 I no longer have WiFi capabilities. In Windows - Settings - Network & Internet I do not have a WiFi option listed. However, if I go to Control Panel - Network and Internet - Network Connections I see my wireless service listed. I have confirmed that I have the correct drivers loaded - Qualcomm Atheros. When I diagnose this connection I get the following message:
There might be a problem with the driver for the Wireless Network Connection adapterWindows couldn't automatically bind the IP protocol stack to the network adapter.
View 5 Replies
Feb 2, 2016
Product Name: Hp Omen 15
Operating System: Microsoft Windows 10 (64-bit)
Wifi card: Intel Wireless-N 7260
since some days my wifi has stopped working.If I click on Wifi icon it shows only ONE (max two) NETWORK:And I live in a building with 20+ networks, as you can see from WiFi Analyzer (I'm the red one on the right).If I deactive/reactive Wifi with fn+f12, it goes to Airplane mode and to Wifi mode again and it eventually shows all the networks/My Wifi is on the top. If it's saved, Windows connects to it and then it drops the connection; if it's not saved and I try to connect, it says "You're not able to connect to this network".The fun fact is that after some seconds every network disappear and only one is showed (probably the neighbour one..I dunno).
I've already tried to HARD-RESET the notebook keeping the power button for 10/15sec with the laptop turned off.I've already tried to follow these instructions [URL] ... updating drivers (Intel 18.12.0.3, 18.12.1.2, 18.30.0.9 [Windows 10 default], 18.32.0 [Lastest drivers]) with no success. Everytime I install a new drivers, I uninstalled the previous one + Wireless software + reboot.
I tried to uncheked "Allow this computer to turn off this device to save power" on my Wifi hardware settings without success.The HP Network support says I didn't choose a Wifi (Really? The problem is I don't see my Wifi on the list!).This is not related to a new Windows 10 upgrade since I've installed it months ago and It's the first time I've this problem :/ It always worked
I tried different settings too/I changed channel, I set 802.11g on my router, APSD off on the router.I set "Magic packet off, ad hoc QoS off, U-APSD off, fat channel off,incremental throughput off, HT mode off" on the card setting without success. Nothing chaned.The Hardware test doesn't detect any failure. If I go close to the router, it shows my network with full power connection and it connects to it. Then I go back to my bedroom (probably 3/4 meters far), it KEEPS the connection for 30/40min and It drops the connection and I can't reconnect to it anymore. It always worked perfectly in my room in these months (I bought it in March 2015), so the distance is not a problem, I'm 6/7m far from the router.In this case It shows my Network (Connected) and the neighbour network...and the other 20+ networks???
The only way I have is USB tethering with my Nexus 5.I tried the Wifi connection on Elementary Freya (Ubuntu linux based OS) and it shows 20+ networks available on the list. It has not connection problem with my Wifi, but sometimes it stops working, the webpages stop loading and I must reboot Wifi to reconnect to it (usually after 30/40min using it).What's the problem? Is my Wifi card broken?
View 1 Replies
Oct 9, 2015
Every time I try to join a wifi network, my computer crash within a few seconds. It says "system service exception" igdkmd64.sys in the bsod. So I just cant connect to the internet anymore.. im on my phone right now.
Windows 10 from win7
Intel core i7-3610qm
Intel centrino wireless-n 2230
View 6 Replies
Jan 15, 2016
My desktop is connected to my router by Ethernet. However, the printer I use is in my wife's office on another floor. It is a wireless Epson Artisan 730. I have added a Dlink DWA-171 wireless usb adapter to my desktop to print wirelessly to the Epson.
However, every time I want to print, I have to disable my Ethernet connection so the WiFi connection will see the printer. Then I'm done printing and I re-enable the Ethernet (faster, more stable).
View 2 Replies
Dec 23, 2015
Each time I try to log in to a particular networked computer ( #3) from Computer #4 , a windows security essentials pop up and asks for credentials even though I checked on allowing access without passwords in computer #3 . In any case when I typed in the user name and password for computer ( #3) , I keep getting error indicating wrong user or password. However the reverse from computer #3 to #4 is OK . All my networked computers do not require password and I am not using workgroup or homegroup just simply network shares.
View 2 Replies
Feb 10, 2016
When I run the troubleshooting I keep getting the message that says:
"One or more network protocols are missing in this computer".
When I run the "netsh winsock reset" in the Administrator Command Center, I get the messages:
" The following DLL cannot be loaded: NETIOHLP.DLL" and "The following DLL cannot be loaded: NSHIPSEC.DLL".
View 2 Replies
Feb 23, 2016
this issue has plagued me forever since windows 10, and even slightly in windows 8.1. this issue would come randomly and i cant connect to internet even if i were a point blank in front of the router. running the troubleshooting does not fix it. the only way to fix it most of the time is to disable the wifi adapter for about 2 minutes and re enable it again. in some cases only a reboot can fix it and in rare cases it can only be fixed by uninstalling the wifi drivers and starting over.i have tried with 3 different wifi adapters, 2 computers and 2 routers.
it seems to struggle the most with connecting to optimum wifi/Xfinity wifi (which my laptop is added to my account) its mainly this optimum wifi here causing issues making router itself a issue but still. the other router is my 4g sprint hotspot, sometimes on rare occasion the same thing happens.
View 6 Replies
Jan 2, 2016
This happened after the latest major update.
I've tried the following steps with no success 1) sfc /scannow. This showed no errors
2) netsh advfirewall reset netsh int ip reset*** netsh int ipv6 reset netsh int ipv4 reset netsh winsock reset *** This command did not work originally until I went to HKEY_LOCAL_MACHINE/SYSTEM/CurrentControl and changed Control/NSI folder 26 permission to everyone (This box was unchecked again after reboot
3) ipconfig /flushdns ipconfig /registerdns ipconfig /release ipconfig /renew
4) Disabling and Renabling the Network Adapter within device manager.
5) Uninstalling the driver
6) Installing the latest drivers both from the Asrock/intel website and googling my network adapter.
7) I saw the fix where someone deletes the Windows 10 WIN and WIN2, and replaces with a clean Windows 7/8 version in this registry: HKEY_LOCAL_MACHINESystemCurrentControlSetServicesWinsock HKEY_LOCAL_MACHINESystemCurrentControlSetServicesWinsock2
- Did not work also, it gave me a new problem no ethernet something which troubleshoot can't also fix.
8) Finally Reset W10. Still get the same error
View 9 Replies
Dec 28, 2015
I have w10, running a static ip address through time warner cable in Ohio. Time warner said they had a problem on their end, ever since then I can't connect to our security cameras. I run a powerline from the house to the office., have reset my computer, modem and wireless router. Still getting the same error - one or more network protocols are missing from this computer. I tried talking with time warner cable - no go!
View 9 Replies
Jan 20, 2016
Why suddenly out of the blue my network quit showing one of my computers? I have a tablet and laptop both with windows 10. my tablet still shows both computers, but my laptop no longer shows the tablet. I didn't change anything. What can cause this and how do I fix it?
View 4 Replies
Jan 7, 2016
I installed W10. This problem appears to be random and happens a couple of time a month. It is really annoying. What happens is, the WiFi appears to stop working. It can't find any available networks and won't reconnect no matter what I do. I have even tried closing/restarting explorer but that does nothing.
If I try to shut-down or restart my computer, it just hangs on the shut-down/restart screen. I have to hold down the power button to get my computer to shut-down. The weird thing is, after a restart, it works fine ...for a few weeks. It just seems very strange.
I use a WiFi dongle. I have a couple of them so I tried each one - they all eventually give me the same result . I have a HP if that works.
View 3 Replies
Jan 19, 2016
I will be keeping the wireless turned off most of the time on my desktop, as I use it for live pro audio. Is there a registry hack to put the switch in there, even if the computer is not a laptop???
View 9 Replies
Jan 6, 2016
I have installed Windows 10 after having 8.1. I cannot get my printer to work it is a Kodak one wii fii enabled but since installing windows 10 it will not print via wii fii. It has a couple of times printed via the usb cable but more often than not wont print. I wondered if it was anything to do with it picking up which port I am trying to print from. What I can do. Was thinking of getting rid of Windows 10 and going back to 8.1 but dont know how to do it.
View 3 Replies
Jan 21, 2016
In Windows XP, when I print a doc from my PDF viewer, I can select my network attached printer's FAX machine and send a fax. In Windows 10, when I print I have a print destination of 'Fax' which puts me into the Windows 10 Fax code which tells me that I don't have a fax machine set up and then we go downhill into total irrelevancy.
View 5 Replies
Nov 2, 2015
I have my laptop at work and have had no trouble connecting the company WiFi (they have Guest WiFi and a WiFi where you need to enter your company provided Username and Password). I have been connecting using my Username and password. Today I had to change my company login password. Now when I try to connect my laptop I get a "can't connect" message because the password saved in my laptop is no longer valid. But I can't find a place in Win10 to enter my new password.
I remember the first time I logged onto the company WiFi a Windows popup came up asking for my Username and Password (which was saved so I didn't need to enter it again - until now). This time not getting the popup - it just says "can't connect".
View 7 Replies
Jan 9, 2016
Running Windows 10 on a Dell Latitutde I was trying to setup a Netgear Wifi Extender because the Fios Router does not reach all the way to the other side of the house. I did the setup (so I thought) the way the manual told me and my computer was trying to connect to the extender, but it just stayed in "Connecting..." For a long long time. Eventually I gave up and thought I'd hit the reset button on the extender and try again.
Now my wifi adapter finds NO networks. All my other devices see all the networks.
The only other time this has ever happened I had accidentally hit the network adapter switch on the side of the PC, so I'm 100% sure that's not the problem and that it is 'on' in the settings. I've tried restarting the pc several times as well as toggling the adapter on/off, airplane mode on/off, and the switch on the PC on/off.. And it still sees no networks..
View 1 Replies
Nov 24, 2015
I have just replaced my WiFi card from (BCM943228HMB) to BCM94352HMB. Before replacing my WiFi card i done the following:
Made computer boot in safe mode with networking.
After that i replaced the card, then booted into windows 10 (safe mode with networking) and checked device manager. Everything was OK (See attached picture). I then tried to turn on WiFi, but it does not turn on.
View 9 Replies
Mar 5, 2016
Error code 0x80070035
I have two computers that I'm trying to get to communicate with each other so I can move files back and forth between them. My plan is to make one of them the home's backup and main storage system. the problem is that I can only seem to get one of them to actually communicate equally. Computer 1 is a factory Lenovo Intel i3 computer. Computer 2 is a home made AMD that I just built a few weeks ago.
Both are running Win 10 Pro.
Both are physically attached to the router. Heck, they're physically stacked on each other on my desk....
Using File Explorer, on the left side Panel under Network, it shows both computers: AMD and Lenovo.
Computer 1(factory) is able to the files on Computer 2 easily by going over through File Explorer. But, if I click on one of the files, I get the message that I DO NOT HAVE PERMISSION. If I try to cut/Paste files from Computer 1 to computer 2, I get the same message.
Computer 2. I am also able to see the computer listed under Network in the left panel. When I click on Computer 1 to access it, I get a Network Error Windows cannot access Lenovo (Computer1) Error code 0x80070035
I've tried the Diagnose option and it doesn't work.
If I click on a Drive under Network on the very computer, I can see the drives, I can see the directory list. If I click on a file, I get the error. Example on the left side panel on my AMD computer I select:
>AMD
>C:
>PerfLogs
It's at this point that I get the error: Windows cannot access amdcPerfLogs as an example
I've tried running through Homegroup setup and Googled for days on setting up a network with Windows 10 and can't seem to figure out what I'm not doing here to make these computers talk and communicate with each other. I eventually, want to get all my computers to talk to the AMD so I can use it for a main storage/backup for the home network.
View 1 Replies
Oct 1, 2015
How do I find my network DVR in Network and sharing center?
View 4 Replies
Dec 19, 2015
My computer recognizes my printer as my selected device and prior to installing Windows 10 I could print easily.
View 2 Replies
Oct 28, 2015
I don't have the ability to print documents I open from my files or from e-mails. If I right click the only option that shows up is to "save as". I have tried to put the printer icon in my tool bar but it is dark and doesnt function.
View 3 Replies
Jan 30, 2016
I ran into something strange this morning when I logged onto my computer: I couldn't connect to my wireless network anymore.
Fairly standard, I thought I'd go reset the router and have it be done with, but then I noticed that my phones were both still fully connected. (2 android phones on different OS versions). So my router itself wasn't have a problem, and I was still receiving internet.
I restarted my computer, as any good human being does, and the problem persisted. I then 'forgot the network' and restarted. Typing in my password again and trying to connect, didn't work.
I then remembered I had recently updated Windows 10 #sillyme (Not like I had a choice anyway x_x) So I thought maybe the driver had been updated. Nope. I even tried uninstalling the driver anyway and restarting. Nothing changed.
OK, so then maybe it's my hardware that's going bad? Luckily I have a dual boot So I booted up Ubuntu instead of windows and bam, everything is working perfectly. Absolutely no problems with connecting to my network.
Can't connect to WiFi network. I've already tried: restarting computer, forgetting the network, and uninstalling the driver. Also, it's not hardware as I can connect on the same machine using a different OS.
View -1 Replies