Networking :: Can't Reliably Access Router Setup Screen
Aug 7, 2015
I have three computers wired to my D-Link DSL-504T modem/router.
Since upgrading two of my PCs to Widows 10 Pro (activated, clean install) I can no longer get reliable access to my routers configuration screen (192.168.1.1) through these PCs, although my third computer that is still running WinXP has no problem at all. Internet access on all three computers is unaffected and works perfectly.
The two W10 computers get to the router login screen, accept my username and password and then try and display the next status page whereupon the following happens:
Firefox: Stops with 'The connection was reset' error
Edge and Internet Explorer: Sit waiting forever (or as long as I'm prepared to wait!)
Chrome: Occasionally displays part of the status page, but mostly just sits there waiting.
The WinXP PC just sails along, displaying every page instantly and putting two fingers up to its more modern brethren!
I've reset the router and that makes no difference. I've turned off the Windows firewall and that makes no difference. It can't be my AV software (NOD32) as that is only running on one of the W10 PCs. I've flushed the DNS and tried just about everything I can think of and still the two W10 machines fail.
View 9 Replies
Similar Messages:
Aug 22, 2015
Since up grading to windows 10 I can no longer access my router setup page. When I type in the address nothing happens the little circle just keeps spinning. I tried chrome and get the same thing. I also tried from 2 different computers, both running windows 10. the router is an ASUS AC router.
View 8 Replies
Nov 23, 2015
I have 3 PC's on my home network ( hard wired ). Two PC's are now Win 10, one still Win 8. Neither of the Win 10 PC's can access the router admin page. When I input the IP I get a prompt confirming it is the correct router and it requires ID and password. However, when I input this the browser just sits with the "hourglass" spinning round. Occasionally, it does access the router, but the pages are incomplete. Access the page via the Win 8 is fine. I use the same AV prog on all PC's but have tried deactivating the AV and Firewall on the Win 10 PC's, but still no access.
The Win 10 PC has full internet access, and is otherwise working fine. I can also access the router admin page wirelessly via my smartphone.I have read a few similar posts here and tried rebooting router and PC's several times, but still no access.Not a major headache since I can get access via the Win 8 PC, but I had intended upgrading that one to Win 10 too, but now not so sure.
View 14 Replies
Jan 25, 2016
My laptop keeps disconnecting my wifi since i installed windows 10 the only way to get connected again is to reboot my router.
View 3 Replies
Mar 5, 2016
How can I change my Cisco Cable Modem's Mac Address>
View 1 Replies
Jan 28, 2016
I just replaced my old router (Linksys WRT54G) to a Linksys x1000. However, my download speed is slower than the previous router I had. I tried the following things to resolve this problem:
Upgrading to the latest firmware version;Updated my wireless network card drivers to the latest version;Switching between different channels (channel 1 and 5 and default channel). I have set Network Mode to: Mixed and I set Channel Width to Automatic (20 or 40 MHz).
When using my old router I had an average download speed of 1 MB/sec while using the new router I can't get pas 500 KB/sec. In both cases I was sitting next to the router.
Oh, and by the way, there's also a port on the router named DSL. It looks like it doesn't matter whether I connect that port to my modem. How come? What's its function?
View 5 Replies
Jan 14, 2016
i have been suffering slow WiFi speeds for a while now and sky have replaced my router.
I have two computers both running windows 10 with the latest build
Now since i started with this router i have lost my home network and i have not changed anything on the computer
Some times i can see my other computer but not able to connect to it. sometimes i can see nothing. sometimes i can see the sky router and sometimes not.
My network is set to private on both computers and file and printing is turned on.
All i have done is plugged in a new router.
Sometimes i can see on my network a device called AirTies WAP what is this.
After doing a google search i found that AirTies WAP is something to do with my Sky wireless booster. is that right.
I am not able to see the other computer it says error 0x80070035
View 9 Replies
Nov 5, 2015
I have an ASUS 2 speed router - it worked fine in Win 7, allowing me to target the 5.2 MHz stream toward my TV for streaming, and use the 2.5 MHz speed for the computers, tablets & phones.
Well, I lost my motherboard, and purchased a CPU with Windows 10. I cannot tell what the router is doing - Windows 10 seems to think I do not require this information, and will not allow me to even SEE the router settings, let alone change them. The stream to the TV seems fine - the CPU internet is slow.
Anyway - how I can access the router settings!
View 3 Replies
Jan 14, 2016
i have been suffering slow WiFi speeds for a while now and sky have replaced my router.
I have two computers both running windows 10 with the latest build.
Now since i started with this router i have lost my home network and i have not changed anything on the computer.
some times i can see my other computer but not able to connect to it. sometimes i can see nothing. sometimes i can see the sky router and sometimes not. I am not able to see my printer at all on ether computer.
My network is set to private on both computers and file and printing is turned on.
All i have done is plugged in a new router.Sometimes i can see on my network a device called AirTies WAP what is this.
View 1 Replies
Sep 27, 2015
How to get rid of Win10. Something removed my previous Win7 files and will not allow access to C drive.
View 1 Replies
Nov 24, 2015
My internet worked fine and I didn't do any changes to it up until it stopped working. I've managed to fix the internet access to allow me to access the internet on my laptop through wi-fi but network access still says no internet access. Websites work however ethernet does not work! I can't connect online on my playstation because ethernet doesn't work. I've tried disabling and enabling the ethernet. I checked the cables, I re-installed the drivers and i turned off and on the router more than I could count.
The internet works on my laptop however a connection test on my playstation 3 says obtain ip address succeeded and internet connection failed. So I can't play online. I am absolutely certain the playstation 3 is not fault as I checked vigurously the settings and I've put in the right connections, however it still does not work? Should I buy new cables for the router?
View 8 Replies
Jan 9, 2016
How to setup my office's wired network with one main server through which all the traffic goes while filtering everything I have blocked?
Also, I have a 5 port hub, can I work with it or do I need a bigger switch?
I only have 5 PCs in my office.
View 6 Replies
Dec 29, 2015
Trying to set up a network for the first time. My intention was to share public folders but when I right click on my user folders (e.g. PCUsersDaveDocuments they are shown as "Shared" and clicking on "Stop sharing" doesn't seem to do anything. Am I missing something.
View 3 Replies
Jul 30, 2015
I was in Windows 10 setup using the Media tool. I have reached the step where it restarted then a big circle came up with three parts under saying like "Copying Files" and other two things. Then, suddenly it restarted and only a black screen was there. No cursor, sounds, screen. Now I am installing Windows 10 again but fearing the same will happen again. This is NOT a black screen at the log screen; I have not even finished the installation yet and get a black screen.
View 2 Replies
Jul 29, 2015
I just updated to Windows 10 and already having problems. I have a dual monitor setup and back on windows 8, both monitors had a good display. Now on windows 10, my main monitor has a blurry or less quality compared to my second monitor. It was always fine until I switched windows.
View 3 Replies
Jan 23, 2016
I installed Windows 10 Enterprise and after 30 minutes, after one restart, LAN stopped working. I have internet connection but I can't acces my LAN (laptop and storage server). My PC has a Realtek PCI GBE Family Controller.
I tried to update the driver, but it is already up to date..
View 2 Replies
Sep 27, 2015
I can see that this seems to be a common problem on here! I have a Lacie cloudbox NAS drive. On WIn7 pro it worked just fine. Windows say the drive in the network group and I could access it like a normal folder.
After I did the Win10 upgrade and it initially worked fine. For other reasons I had to do a fresh install of WIn10 and wipe the hard drive and start from scratch. Ever since then I've not been able to access my NAS drive.
For privacy reasons, during the installation, I turned off many of the sharing and 'open' features of Win10 and always log in with a local account.
View 7 Replies
Jan 10, 2016
I have a home network that includes-Two Windows 7 PCsTwo Linux machinesA Brother MFC7820N networked multifunction printer..All the above are on wired connections. Then there's an 802.11n wireless link for laptops and media devices.I'm just setting up a new machine that's running Windows 10 Home, using the wireless network. I was annoyed to find that Brother don't have a full-function Windows 10 driver for the 7820N that supports scanning, but the Brother site says the built-in drivers in Win 10 should work for basic printing.
Problem: I successfully added the printer device to Windows 10 (at the 3rd attempt) using the "manual advanced" method. The printer has an entry in the hosts file, and was added by host name.The printer fails to print, with a "not responding" type message. The driver also can't pick up the status info from the printer.
What's really weird is-I can ping the printer from the W10 box (and the other machines) by either IP address or hostname.However, this printer has a web interface. I can access this from any of the Windows 7 machines, but the Windows 10 machine says "web site failed to respond" or somesuch. This happens with any of: Edge, IE11, or Chrome browsers.I can't even make a manual connection (telnet to port 80) from the Win 10 machine (timeout).The Windows 10 machine CAN access all the other devices on the home network, including the web servers (Apache) on both the Linux boxes.
This looks like the web access to that particular address is being blocked somehow. I have tried disabling my AntiVirus package (Kaspersky), but that makes no difference. Is Win10 perhaps detecting an "old" web server on the printer and refusing to talk to it? (and why would that prevent printing using lpd?)
View 9 Replies
Nov 8, 2015
Nothing is working to get my computer to connect to the internet again. It was working fine yesterday so don't know what was changed. All other devices can connect. Using my laptop to search.
IPv4 is connected but I can't get IPv6 to connect at all. No error messages anywhere.
Fixed. Updated drivers worked. Just had to restart a couple times for it to work.
View 9 Replies
Dec 8, 2015
Other devices in the house seem to be accessing it normally, so I suppose it's an issue on this end. Sometimes, when I restart, I can access it, but it disappears after a while.
Error: error code 0x80070035 Network error. Windows Cannot Access NAS-M25 Check the spelling of the name. Otherwise there might be a problem with your network. To try to identify and resolve network problems, click Diagnose
Make sure the computer or device is turned on and connected to the network
Specs (I don't know what you need so I just copied it. NAS is Asus NAS-M25 2 Bay)
OS Name Microsoft Windows 10 Home Version 10.0.10586 Build 10586
System Manufacturer MSI System Model MS-7816
System Type x64-based
PC Processor Intel(R) Core(TM) i5-4670K
CPU @ 3.40GHz, 4201 Mhz, 4 Core(s), 4 Logical Processor(s)
[Code]....
View 4 Replies
Dec 1, 2015
After purchasing a new computer and upgrading to WN 10, I had allsorts of trouble getting my scanner and printer to work -- finally got that solved, but then when I try to log on to the internet I get the "Hmmm ..." message. I can't access the net or e-mail, and my wife who has an I Pad and is using a wireless router can't access the net or e-mail either. My grandson is not available for a few days.
View 2 Replies
Aug 9, 2015
Upgraded to windows last week and all has been great. Today, I lost internet connectivity on my Windows 10 PC this morning. I still have Network access to view the Windows 10 machine from the rest of my network. . Restarted the router and modem and still no internet access. Device manager says no issues with my Realtek Network card.
View 4 Replies
Oct 18, 2015
So i was accessing the internet fine on my computer no more than an hour ago on the same network im on my laptop now with and then i restarted my computer and it give me limited access and i cannot connect to the internet. I reinstalled my wifi card driver and that didn't work. The Network and Internet troubleshooter said it was the driver and could not fix the problem itself.
My wifi card is a TP-LINK TL-WDN4800.
View 1 Replies
Feb 23, 2016
I have an issue on both my Windows 10 laptop and desktop PC. Both are DELL and new. Suddenly, my PC wouldn't connect to the internet using ANY wifi network. For this reason, I eliminated my WiFi modem - because the same issue happened when using my phone tethering. Using the Ethernet cable worked. Then a few weeks later my laptop has the same issue, but with this I can't plug in an ethernet port, because it dosen't have one. Both computers had IP Vanish VPN (probably nothing to do with it but thought I'd mention). I believe these issues happened after updates.
I've tried disabling firewall, antivirus, uninstalling Vanish VPN, using cmd from things I've seen recommended, updated network adapter on desktop.
View 9 Replies
Aug 6, 2015
I have two Windows 10 PCs on the same home network and I can't access the default shares on either one of them, I keep getting 'Access denied'.
View 9 Replies
Nov 8, 2015
my Windows 10 Enterprise PC cannot access to my company's network storage at 10.63.0.250. In the previous edition like windows 7 or 8, I can access easily by enter 10.63.0.250 in the Address box in File Explorer or in Run windows (Window button + R). However, I have got trouble since I upgraded to Window 10. The notification is "The network path was not found", although I can ping to this and another PC can access the network storage in File Explorer.
View 8 Replies
