Networking :: Cannot Access Shared Network Drive
Aug 9, 2015
On my desktop (AKA S4, currently running Win8.1 x64 pro) I have shared out four of the hard drives with full permissions. I have 5 PCs in my network and all can access the four drives. My sister is visiting and currently accessing my network via cat5 wire. On her PC (running Win 10 x64 pro) if I view the network in Windows Explorer I can see my desktop (S4). When I double-click on S4 I'm prompted to enter network credentials. "Enter your credentials to connect to: S4" I entered my logon S4 ID and password but it tells me that the user name or password is incorrect. What the heck should I be entering? All computers are part of the same work group (WORKGROUP) and all computers are wired connected. All computers can access the internet.
View 9 Replies
Similar Messages:
Dec 26, 2015
I have a usb connected hard drive connected to my Bell 2000 router. The instructions to access this drive is to go to the Documents folder and enter mynetwork. This then shows the shared hard drive as mynetworkNETWORKHD. If I now click on NETWORKHD I get the following:
mynetworkNWTWORKHD is not accessible. You might not have permission to use this network resource. Contac the administrator of this server to find out if you have access permissions.
Not enough storage is available to process this command. This all worked for me under Windows 7. I am unsure if it ever worked under Windows 10.
If I plug a 2 gb thumb drive into the other port on my Bell 2000 rounter it works without any problem.
View 1 Replies
Feb 10, 2016
From one of my Windows 10 machines I am unable to access the shared folders on the other. The troubleshooter says "One or more network protocols are missing on this computer" and "Windows Sockets registry entries required for network connectivity are missing."
I have run sfc /scannow, but no problems were found. I don't get the problem when sharing in the other direction or when accessing the shared folders on the same machine.
This comes amidst a cluster of sharing-related problems. Before the reboot after which the present problem manifested itself, shares going in the other direction were invisible in the network browser (but could be accessed via the search bar). Also, the machine in question does not appear in the HomeGroup browser even though it is a member of the HomeGroup.
View 3 Replies
Feb 10, 2016
How do I connect to a shared network drive I have setup on my Windows 2012 R2 standard server at home, from my Windows 10 pro laptop is at work?
Do I have to setup a vpn on windows 2012 server and connect to it from my laptop?
View 5 Replies
Nov 8, 2015
my Windows 10 Enterprise PC cannot access to my company's network storage at 10.63.0.250. In the previous edition like windows 7 or 8, I can access easily by enter 10.63.0.250 in the Address box in File Explorer or in Run windows (Window button + R). However, I have got trouble since I upgraded to Window 10. The notification is "The network path was not found", although I can ping to this and another PC can access the network storage in File Explorer.
View 8 Replies
Dec 1, 2015
I have a NAS (WD MyBookLive) which cannot be accessed in Windows Explorer on my brand new Surface by IP address (or name- though that doesn't work on any of my devices for some reason). I can access the config page in my browser by IP, and two other Win10 devices on my network can access the NAS by IP in Explorer fine, and I can access other devices on my network by IP fine on the Surface but for whatever reason only this computer can't access that NAS in Win Explorer.
I just got the Surface yesterday and was able to access the NAS fine, the only thing that's changed is I renamed the device and restarted and since then haven't been able to connect. I've restarted both the PC again and the NAS but no change.
View 9 Replies
Oct 16, 2015
My Windows 10 seems to share some files and i cannot figure out how to disable files sharing.
I have 0 files in my Media player library, also, i have no other dlna sw installed that shares anything.
How to remove these files from shared list?
I just realized that all the shared files are .mov files. Are the .mov files automatically shared somehow?
View 7 Replies
Jan 23, 2016
I have two laptops, both sitting next to the WiFi but from some reason I cannot see any shared device on laptop 1.
And on laptop 2, I can see all the devices with shared files in them. I can even access the shared files in laptop 1, but I cannot see the shared files on laptop 2.
I just installed Windows 10 on both of them, same method, same software, same laptops that is same model.
View 1 Replies
Jan 6, 2016
OK, so I have this one Windows 10 computer.
When trying to access a Windows 8 computer under "Network", it prompts me for a user/pass.
All other computers (Windows 7/8) can see the public folders of each other no problem; even the public folders of this one Windows 10 computer!
View 1 Replies
Oct 6, 2015
I finally got a PSU for my fileserver, and got it tested. It world perfect, but! I got a little problem, me and my stepdad is gonna use this server (it's mine) and I want both of us to access it from all our pc's and write to it. I didn't get it working when I had my NUC as a temp server. And I really want it do work now. So me and my stepdad can write data to it over the network.
View 2 Replies
Nov 3, 2015
So I bit the bullet and "upgraded" my laptop from Windows 7 to 10. I expected to find a few things that didn't work anymore, but not so soon as this. I keep it in sync with my desktop PC (running XP) by net-sharing its hard drive, with permission for full control granted to its "administrators" group. I mount it on my desktop PC, where I have the same username and password for my primary administrator account. When it ran Windows 7 this all worked well, but now whenever I try to list or open its files I get "Access is denied."
Interestingly, I still can access the hard drive on my desktop PC while sitting at my laptop. It is only the vice-versa that fails, accessing the hard drive on my laptop PC while sitting at my desktop.
On my laptop, Windows Firewall is "off" for private networks, and it considers my home network to be "private."
View 9 Replies
Nov 24, 2015
My internet worked fine and I didn't do any changes to it up until it stopped working. I've managed to fix the internet access to allow me to access the internet on my laptop through wi-fi but network access still says no internet access. Websites work however ethernet does not work! I can't connect online on my playstation because ethernet doesn't work. I've tried disabling and enabling the ethernet. I checked the cables, I re-installed the drivers and i turned off and on the router more than I could count.
The internet works on my laptop however a connection test on my playstation 3 says obtain ip address succeeded and internet connection failed. So I can't play online. I am absolutely certain the playstation 3 is not fault as I checked vigurously the settings and I've put in the right connections, however it still does not work? Should I buy new cables for the router?
View 8 Replies
Jan 10, 2016
I have a home network that includes-Two Windows 7 PCsTwo Linux machinesA Brother MFC7820N networked multifunction printer..All the above are on wired connections. Then there's an 802.11n wireless link for laptops and media devices.I'm just setting up a new machine that's running Windows 10 Home, using the wireless network. I was annoyed to find that Brother don't have a full-function Windows 10 driver for the 7820N that supports scanning, but the Brother site says the built-in drivers in Win 10 should work for basic printing.
Problem: I successfully added the printer device to Windows 10 (at the 3rd attempt) using the "manual advanced" method. The printer has an entry in the hosts file, and was added by host name.The printer fails to print, with a "not responding" type message. The driver also can't pick up the status info from the printer.
What's really weird is-I can ping the printer from the W10 box (and the other machines) by either IP address or hostname.However, this printer has a web interface. I can access this from any of the Windows 7 machines, but the Windows 10 machine says "web site failed to respond" or somesuch. This happens with any of: Edge, IE11, or Chrome browsers.I can't even make a manual connection (telnet to port 80) from the Win 10 machine (timeout).The Windows 10 machine CAN access all the other devices on the home network, including the web servers (Apache) on both the Linux boxes.
This looks like the web access to that particular address is being blocked somehow. I have tried disabling my AntiVirus package (Kaspersky), but that makes no difference. Is Win10 perhaps detecting an "old" web server on the printer and refusing to talk to it? (and why would that prevent printing using lpd?)
View 9 Replies
Nov 8, 2015
Nothing is working to get my computer to connect to the internet again. It was working fine yesterday so don't know what was changed. All other devices can connect. Using my laptop to search.
IPv4 is connected but I can't get IPv6 to connect at all. No error messages anywhere.
Fixed. Updated drivers worked. Just had to restart a couple times for it to work.
View 9 Replies
Oct 10, 2015
I have a desktop and a laptop setup at home, I have recently upgraded both to Windows 10. Both were previously running Windows 7 Home Premium and could identify each other on the network and I could access files on either PC from one or the other at any time.With the upgrade to Windows 10 I am still able to see the other machine on the local network, but I am unable to access their folders and move files between machines. The error message I get is as follows.When I run the network diagnosis no errors are detected and it asks me if I want to explore other options.
The full error message is:I do have shared libraries available across both machines that are part of my homegroup, so I can access the video files in the hard drive of my desktop from my Laptop but only to play them - not to move them around.I suspect this is either a user validation issue, or a firewall issue and I'm not sure how to go about checking whether this is the case or not.
View 6 Replies
Jan 25, 2016
Three machines:
Surface Pro 4 - fully updated
Surface Pro 3 - Windows 10, fully updated
Lenovo X220T - Windows 8.1 Fully updated
All three machines can see all available network devices, including each other.All three machines can successfully access and interact with third party network devices. In this case, it is a NAS and a network printer.The windows 8.1 machine can access each of the other windows 10 machinesNeither Windows 10 machines can access any other windows share on the network.
This gets me error 80070035 with diagnostics telling me nothing
All three machines are on a Homegroup and while each can see, no one can access anything
Trouble shooting tried:
Double checked all sharing settings on all three computers. They are identical.Double checked workgroupsTried it via IP addressesReset winsock on all machinesFlushed DNS on all machinesReset the routerUninstalled and reinstalled Windows sharing and about 3 other network protocols and servicesEnabled NetBiosran this: sc.exe config lanmanworkstation depend= bowser/mrxsmb10/nsi sc.exe config mrxsmb20 start= disabledMessing around with all sorts of netsh commands clearing and flushing all sorts of other things
View 5 Replies
Feb 14, 2015
I have two computers running Windows 10 Pro Technical Preview Build 9926. One computer is a desktop and it is working perfectly. The other is a new HP 15-F039WM laptop and it came with Windows 8.1 With Bing installed and it also works perfectly in Windows 8.1 mode. I resized the hard drive on the HP laptop to free up 150Gb of space and then installed Windows 10 TP Build 9926 from DVD. It still works perfectly when I use dual boot to go into Windows 8.1. When I use dual boot to go into Windows 10, the network icon in the system tray says "Unidentified network - No Internet access". I did swap cables, etc, but I knew that wouldn't work because the laptop does have Internet access when booting to Windows 8.1.
I read through some threads here after searching for DHCP and connectivity issues and even tried some of the suggestions such as using regedit to look at the network profile. There isn't a network profile. It is displaying a 169... IP Address, so I know that it isn't getting an IP. I tried to manually add the correct settings that work for Windows 8.1 (192.168.0.15 with 192.168.0.1 as the Gateway), but that fails.
View 9 Replies
Aug 17, 2015
I am having problem adding folders from a network drive to the Quick Access.
Firstly I can only drag and drop into the QA in explorer, as right clicking option doesn't work and it only allows one folder at a time to be included. Local folders are not a problem and any number can be included in QA.
Also pinning files to taskbar apps has a similar problem if they are on the network drive.
View 9 Replies
Dec 26, 2015
I am trying to set up our server which we have on my sisters new laptop. when I go to 'map network drive' and click 'browse' the server called 'BGE-B-NAS' doesn't appear on the list. I have tried multiple times and nothing seems to be working. I also tried to type it in manually but it just said that 'windows cannot access BGE-B-NASCompanydata'. Is it to do with the fact that this is a laptop and it is using the wifi instead of being wired?
View 1 Replies
Feb 10, 2016
I have a strange issue on my Windows 10 computer: I can only see 1 computer under my home network, but other computers do not appear at all. However, I can access them fine typing in the address bar manually.
Also, for some reason, "LEESERVERPC" does not appear on my network folder, but it appears on the left pane. Is this a Windows 10 issue? Other computers are running Windows Server 2012R2 or Windows 7 and they easily find all computers in the network. I rebooted and resetted my router countless number of times. Refreshing doesn't seem to do anything.
Background: Originally, my Windows 10 computer was seeing all the computers in the network. As I was trying to set up another computer on the network, I refresh my network several times from my Windows 10 computer, and all a sudden all the computers except 1 disappeared on my Windows Explorer "Network". Every other computer in the network has no issues.
See Pic:
I want to emphasize that I CAN ACCESS the shared network computers. It's just that Windows Explorer's "Network" does not show most of the computers!
View 3 Replies
Feb 10, 2016
Everything about my network worked fine on Windows 8. With Windows 10 I have been unable to access PC's on my router. Internet work fine, I see the PC's on network in homegroup, But gives me the dreadful and nonsensical error:
Worth noting that my windows 8 laptop can access these computers no problem. but my windows 10 pc's can access ANY pc's
Tried Everything
Winsock method
all elevated cmd prompt exe's
tcp4/6 config
drivers config
network settings configs
I am left with no choice but to go back to windows 8 ?
View 1 Replies
Feb 8, 2016
Every so often Windows 10 will give a notification about Limited Network Access on a wired Ethernet connection. The notification is not true as I am able to use non-Microsoft applications such as Firefox just fine with the Internet. However Microsoft applications such as Outlook, Windows Updates, Edge and IE do not detect an Internet connection and are unusable. I found that if I turn off real-time protection in Windows Defender and then reboot the computer it clears the error for a time but it always comes back within a day or two.
View 2 Replies
Dec 5, 2015
I've just moved house and isp. I am trying to connect my pc to my router via an ethernet switch.
At first my pc would not even connect to a network so deleted and reinstalled the ethernet drivers.
Managed after several attempts to change my network from public to private, but i still have no access to the network.
View 3 Replies
Jan 3, 2016
I have been using a wireless connection but have decided its better for online gaming if i go wired/ethernet.
I am having a problem "unidentified network/ No internet access"
Now in the past with an xp pc i connected the ethernet cable and that was it i assumt there is some sort of set up i need to do for win10?
Also it may be worth letting you know i am not directly connected to the router via an ethernet cable, i am using the plug in things that sends the signal down the house electrical wires. Maybe this is an issue although it wasnt on my xp pc.
View 1 Replies
Sep 27, 2015
I can see that this seems to be a common problem on here! I have a Lacie cloudbox NAS drive. On WIn7 pro it worked just fine. Windows say the drive in the network group and I could access it like a normal folder.
After I did the Win10 upgrade and it initially worked fine. For other reasons I had to do a fresh install of WIn10 and wipe the hard drive and start from scratch. Ever since then I've not been able to access my NAS drive.
For privacy reasons, during the installation, I turned off many of the sharing and 'open' features of Win10 and always log in with a local account.
View 7 Replies
Dec 3, 2015
Today i did a fresh install of win 10 Home today on my laptop but i'm unable to see my NAS Drive in my network. I can put the nas address into the address bar in my Network and i can access it but i don't like to do it that way. I also use Kodi media center and now my nas is not showing in my network i can't add media content.
View 9 Replies
