Networking :: Cannot Remove Wireless Network From List
Jan 15, 2016
I have two wireless networks at home, and one is faster than the other. This is because the slower one is wired to my desktop, and the modem and router are the same box. So I would like to remove the slower from machines wireless connected. I searched the forum, and got a solution, the command below, but the answer, as can be read, is that the filter does not exist in the system. I am attaching a screen that shows GVT-15DF at the list of connections.
C:Userslarau>netsh wlan delete filter permission=allow ssid="GVT-15DF" networktype=infrastructure O filtro nao existe no sistema.
View 5 Replies
Similar Messages:
Dec 9, 2015
I started my PC in a new premises with a Wireless modem, I have two other PC's connected.
When I started the PC it saw the wireless network and the option came up to connect and there was a tick in the "Connect Automatically" box.
I selected OK but got a message "unable to connect".
I did not get the opportunity to enter the Password/Key.
Now the PC will not connect to the Network nor will and Diagnose and repair fix anything.
BTW the Ethernet adaptor has been disabled.
The laptop I am sending this from is next to the PC so the wireless signal is okay.
View 4 Replies
Nov 30, 2015
When I power up my laptop it connects to a network, that I don't have (xfinitywifi). I have deleted the profile, to no avail, I get to my network by cycling my wireless. Its really annoying.
View 2 Replies
Aug 8, 2015
So after 2 failed attempts at installing Windows 10 on an Acer Aspire Z5801 PC, I finally managed to succeed. However, a new problem appeared after installation.The Wireless network adapter went completely missing. Windows does not detect its existence at all, it's like the PC doesn't have one installed. It doesn't appear in Device manager + isn't listed as an "unknown device". It's simply not there at all.The wired network adapter is there, but not wireless.
Installing the driver from Acer's website - I had to select Windows 7 64-bit as the version is all that's available for my adapter.I used a USB stick to transfer the setup files to the Acer PC. It said it successfully installed but still didn't appear, even after a reboot.Used a USB wireless adapter (Netgear) to see if it was an issue with how Windows 10 handles Wi-Fi - nope, that installed and worked fine.Scanning for Windows updates after using the USB adapter. Some updates were found and installed (no driver ones though), but still no Wi-Fi.
In the end, I reverted back to Windows 7 and what do you know? The adapter got recognised again.The USB adapter isn't a viable solution since it's required by another PC. I just used it for testing purposes.
View 9 Replies
Oct 6, 2015
I recently brought a new wireless network adapter for usb (Asus usb N14) and since I've started using it the connection is really unstable, I'm on the same connection on my iphone and it's just fine but on my pc it's really struggling, I've ran speed tests and it'll work fine when randomly it'll just go down, I'll still be connected to the router but have no internet. Right now looking at the wifi graph in task manager it literally going straight up for a few seconds then straight back to 0 when downloading a file, and I'm unable to download any large files because it'll just fail after about 30 seconds.
I've updated it to the latest version with no change in performance or reliability. One other thing I'm at Uni so other people will be using the connection and I've no access to the router unfortunately.
View 1 Replies
Jan 24, 2016
i was create map network drive in windows 10 now i need remove but idont now how removed it
View 4 Replies
Oct 16, 2015
My Windows 10 seems to share some files and i cannot figure out how to disable files sharing.
I have 0 files in my Media player library, also, i have no other dlna sw installed that shares anything.
How to remove these files from shared list?
I just realized that all the shared files are .mov files. Are the .mov files automatically shared somehow?
View 7 Replies
Oct 31, 2015
I have a pocket Wifi Device, however, it is NOT using Wifi connection, as I have it connected to my PC using an USB Cable. Every morning I turn on my PC, it creates a new network connection, for example "Network 7"
How do I remove Network 1 to 6, and where are they located?
And how do I stop it from happening, as it seems it will keep going to Network 8, then Network 9 and so on.
View 9 Replies
Aug 2, 2015
I have about Windows 10. Back on Windows 7, under the all programs list I was able to delete anything I didn't want listed there. Unfortunately with Windows 10 I can't remove everything. So I am wondering how can I clean up the "All Apps" list under the start menu?
For example, I want to remove "Calculator", "Calendar" and "Camera" from all apps. When I right click on these items I can only either pin to start bar or task bar.
Is there any way to remove these items so the All apps is a little bit cleaner?
View 6 Replies
Sep 16, 2015
I have passed from Windows 7 to Windows 10. I remember that on the windows 7 i could drag and drop in the start menu
all the programs i use mostly and in the mean time i could sorted the alphabetically.
I would like to have the same on Windows 10 but i cannot sort it out. How you can see in the attached picture,the list is always empty:
View 3 Replies
Oct 22, 2015
My Dell laptop which is windows 10 only has a chronic problem with the adapter constantly needing to be reset. Searching for similar problems led me to the possibility of a USB adapter.
View 1 Replies
Jul 29, 2015
The situation is I can't add any item to the "start list', which is the list on the left of the start icons.As far as I've read, it's supposed to be as easy as dragging an icon, but it can't be done I get an "x" when I reach the destination at the left.Strange also, is that in my context menu there is no option named "start list", which posters point as an option to add a program icon to the list. Also, right clicking on an item on start list does not show me the "remove from this list option".
View 1 Replies
Nov 1, 2015
I have two 2008 Mac Pro computers running a bootcamp setup (OSX El Capitan/Windows) and have a 50 Mbps cable connection with Linksys WRT 1900AC wireless router. The wireless throughput on both machines worked flawlessly in Windows 7 but after upgrading both to Windows 10 the throughput dropped from 50 Mbps down to apprx 1.5 Mbps. Both computers use a Broadcom 5200 series 80211n chipset which are running the Microsoft signed version 5.100.245.200 driver. The wired network runs at full speed, and in OSX both wired and wireless connections run at full speed. I've seen a number of others report the same issue, but have never seen a fix that seems to work. I've tried updating the driver through Windows but get a OS message stating that the best driver is already installed. At the moment I have Ethernet cables strung across the living room floor, and would like to get back to wireless.
View 3 Replies
Aug 7, 2015
I was with win7. Everything was working fine. I upgraded to win 10. Now my computer does not recognize my wireless network. My dual display does not work.
View 1 Replies
Feb 18, 2016
I have a laptop that is directly connected to a wired WAN internet connection and I share the Internet connection with other devices using the netsh command prompt. Is there any way to see who are connected and more importantly, how much bandwidth each device is using?
View 2 Replies
Sep 5, 2015
Under Network & Internet i cannot see wifi although wifi adapter is installed and showing that it is working properly.
View 1 Replies
Sep 12, 2015
So one time I decided to use windows 10 manager mail and people backup tool and then when mail app started to act unresponsive I imported them back and since then I can't remove add/delete any old email accounts.. Where is this thing stored or how can I remove them?
Remove an account - Cannot add any accounts to Mail, Calendar or People apps doesn't work since I cant access the accounts inside the app.. Enabling onedrive or this command didn't do anything either. Get-AppXPackage -AllUsers | Foreach {Add-AppxPackage -DisableDevelopmentMode -Register "$($_.InstallLocation)AppXManifest.xml"}
All I see is this e.g. People app..By mail app just this error if i try to add any account as seen on the right picture. Its like they're burred deep inside the system and I just can't get rid of them to add them new again. I reinstalled both apps and its still showing this list.. How can I remove these accounts?
View 1 Replies
Oct 1, 2015
How do I find my network DVR in Network and sharing center?
View 4 Replies
Oct 11, 2015
Yooooo! I have a Lenovo Y510p with modified BIOS so I could replace the crappy Intel wireless card that came with it (Intel Centrino N2230) for an Azurewave - Broadcom 4352. The experience has been good so far, the only problem I'm having is the low wireless signal with the card. I have other laptops that have higher range and strengths on the same place with older cards.
I've tried verifying (and even swapping) the cables and noted no difference. I asked on another forum and they told me that it could be that the card is not receiving enough power, but I have yet to find a settings in the BIOS or in Windows that dwindles its performance. I have recently updated the driver from Lenovo's website and it didn't improve a bit. How to improve the wireless signal?
View 9 Replies
Feb 10, 2016
I have just bought an HP laptop running windows 10. I cannot connect to internet wirelessly as when I select my network connection it requests username and password. (Screen shot attached)I only have a network password for my connection and have never had or been requested for a username.
We have a couple of laptops at home and they connect with password only no problem. It is only this laptop that requests both. I can find no way past it and cannot connect. It connects via cable fine but thats obviously not ideal for portable laptop.
View 9 Replies
Sep 16, 2015
We have a new (albeit old) wireless printer (HP Color laserjet CP3525) with a wireless adapter card. Computers running Windows 7 or Windows 8 could see the network and connect. All computers could then print to the printer. None of our computers running Windows 8.1 could see the network. I upgraded one computer to Windows 10. It can now see the printer network but cannot connect.
View 7 Replies
Aug 20, 2015
When I first installed Win 10 it was working great got my wifi connection working and everything now it seems I cannot get connected. I have tried several times, putting it mildly. I put in the Modem/router address and password and then I go to the site that shows you the wifi connections and mine is not there. But there are about 10 or 12 that are there. I have tried this several times like I said. And I have rebooted to see if that did anything and it made no diff.
It seems from some of the reading I have done this might be a problem caused by an update. It worked great for several days. And while I am thinking of it can you delete all those other wi fi addresses some how.
View 19 Replies
Oct 29, 2015
I was unable to connect to an older (backup) AP in Win10, but Win7 and my phone, tablet etc could connect no problem - these were connecting using WPA-TKIP, but MS now only allows WPA2-AES
So MS have removed the less secure WPA-TKIP protocol from W10 (this apparently started in W8), but they have left the even less secure WEP protocol in place!!!
I have now connected using WEP - on my router you can use a passphrase to create the hex pairs for the key, but you need to enter the actual hex characters as the key (eg 13 hex digit pairs = 26 characters to enter)
Looking at the wlan profile from the command line interface shows what the settings are...
netsh wlan>show profile plusnet2
Profile PlusNet2 on interface Wireless Network Connection 4:
====================================
Applied: All User Profile
Profile information
-------------------
Version : 1
Type : Wireless LAN
Name : PlusNet2
Control options :
Connection mode : Connect automatically
[Code]......
View 6 Replies
Dec 17, 2015
So i currently have a MSI GT80 Titan running killer wireless 1525 network adapter and am constantly seeing network drops to the point where i get an exclamation mark over my wireless icon and no activity. Connection shows connected but no speed, only until i manually disconnect and reconnect. This has been happening since earlier this week after having the laptop off for a couple days and i'm sure some updates came in from Microsoft.
Steps I've taken already to resolve this:
1. Uninstalled killer wireless software suite and installed stand alone killer driver
2. Refreshed the PC with clean windows 10 install
3. All drivers are up to date including BIOS
4. Ran ccleaner along with registry side of it
5. Memtest shows no errors
6. Hard drives show no errors
7. Connected to LAN and no drops all day
I'm not sure what else to check as this is a fairly new laptop bought back in march and doing some searching on google showed some posts about people with the same issues (different laptops/hardware) thinking it was related to Windows 10.
View 1 Replies
Oct 19, 2015
I have been connecting my PC to my router via a Ethernet cable and have had no issues but I want to move the PC to another room and run it off a wireless adapter. I tried a TP-Link USB adapter but it didn't work so I switched it for a Netgear one. That doesn't work either which makes me think there is something not right with my PC. I have installed and uninstalled multiple times, tired different USB ports but the Wireless Adapter doesn't seem to get an IP address and there are no Wireless settings in the control panel.But there are no Wireless setting and no connectivity to the Adapter.
View 3 Replies
Dec 8, 2015
my laptop recently did automatic updates and I have been having problems with the WiFi. When I first turn it on every thing is fine, but after about 30 minuets or if I shut the lid and it goes to sleep the WiFi just does not work anymore. I have to go to my network adapter and run the trouble shooter which finds the Windows Wireless Serves is not running on this computer. It starts it and every thing is fine for another 30 minutes or until I shut the lid again. I have looked in services.msc and WLAN AutoConfig is running and set to automatic. I have tried uninstalling and reinstalling the driver for my wireless card.
View 1 Replies
