I can reach them by the quick access shortcuts I added before the upgrade but they don't show up in WE Network.
Rebooting my WD MyCloud solves the problem until next time I reboot my Win10 c.
I recently upgraded the 3 machines on my home network to windows 10 home.
Currently when I open up "this PC" and click on network, only one of the 3 computers shows up, and this machine is not the local machine on 2 of them. However If I type in the UNC address for the other machines I can access them.
If I set up a home group all the computers show up in the home group roll out under "this PC" but still not in the network.
Something else that is strange. If I look at "network and sharing center" two of the the computer see one private network name and the other one sees a different name.
I have two Win 7 computers on my wired network and 6 Win XP computers on this same network. This main computer was Win 7 and just upgraded to Win 10 in November. For a year this network has worked just fine, plug and play basically when I set it up, now after Christmas shutdown (2 weeks), I can't see any of the computers on this network. The only thing I can see is the media drive on a computer called 6Head2. All I really do is transfer files from this main computer out to those 8 other computers.
What is wrong with my computer? Network discover, file sharing all checked, network location was changed from Public to Private today by me. But it did work last year, even with the network location being public.
I have 3 computers on the network. All have shared folders . My problem is as follows.
Lets call the computers c2, c3, c4. I am using network shares
When on computer c4 , computers c2 and c3 are not listed at all under network. Sometimes I do see c3 listed but cannot access it.
In computers c2 and c3 , all computers are listed and I can view all the shared folders in c2 , c3 including those on C4.
I cant understand why c4 have such problems viewing other computers on the network. I have rebooted router ( E4200) and computers but still have same problem .
All shared folders are properly shared. and no passwords are required for networks in adv sharing .
I have a desktop and a laptop setup at home, I have recently upgraded both to Windows 10. Both were previously running Windows 7 Home Premium and could identify each other on the network and I could access files on either PC from one or the other at any time.With the upgrade to Windows 10 I am still able to see the other machine on the local network, but I am unable to access their folders and move files between machines. The error message I get is as follows.When I run the network diagnosis no errors are detected and it asks me if I want to explore other options.
The full error message is:I do have shared libraries available across both machines that are part of my homegroup, so I can access the video files in the hard drive of my desktop from my Laptop but only to play them - not to move them around.I suspect this is either a user validation issue, or a firewall issue and I'm not sure how to go about checking whether this is the case or not.
I have two desktops and a NAS drive on my network. Both PC's are Win10. One Pro, the other Home. Everything was working beautifully then out of nowhere the Home machine just stopped accessing the public folder on the Pro machine saying it didn't have permission. I thought the Public folder didn't need permissions if it's shared with Everybody. But it will access and read the other non-public shares on the Pro machine. Weird The Pro machine, however, doesn't even see the Home machine on the network any more, although I can ping it. Again, weird. I had a mapped drive to the Home machine which is now broken. Both PC's can see and access the NAS drive. No settings were changed, nothing was touched, it just worked one minute and stopped the next. The Pro machine was just updated to Build 10586.3 on 11/13/15. But I don't think that caused it because everything worked until the 17th. All the network settings were correct and they have not been changed. I can't find anything about it on the internet except the typical "Make sure Network Discovery is on and file sharing is enabled." Yes, Network Discovery is on and file and printer sharing is enabled on both machines. Still no go.
View 9 RepliesOur home network has a desktop and 3 laptops. The 3 laptops all print through the network to the printer attached to the desktop.
For some reason only 1 of the laptops now shows in the desktop network folder. The other 2 have vanished and cannot see the desktop either so no printing. I have tried running both Homegroups and using names & passwords but no difference. I also have a server on the network and that has vanished.
I have checked the credentials and all passwords and names are correct.
I have removed Avast anti-virus and have Windows firewall set to default settings running with Defender.
Windows 10 is the latest version 1511 on all the PCs.
i have been suffering slow WiFi speeds for a while now and sky have replaced my router.
I have two computers both running windows 10 with the latest build
Now since i started with this router i have lost my home network and i have not changed anything on the computer
Some times i can see my other computer but not able to connect to it. sometimes i can see nothing. sometimes i can see the sky router and sometimes not.
My network is set to private on both computers and file and printing is turned on.
All i have done is plugged in a new router.
Sometimes i can see on my network a device called AirTies WAP what is this.
After doing a google search i found that AirTies WAP is something to do with my Sky wireless booster. is that right.
I am not able to see the other computer it says error 0x80070035
I have a strange issue on my Windows 10 computer: I can only see 1 computer under my home network, but other computers do not appear at all. However, I can access them fine typing in the address bar manually.
Also, for some reason, "LEESERVERPC" does not appear on my network folder, but it appears on the left pane. Is this a Windows 10 issue? Other computers are running Windows Server 2012R2 or Windows 7 and they easily find all computers in the network. I rebooted and resetted my router countless number of times. Refreshing doesn't seem to do anything.
Background: Originally, my Windows 10 computer was seeing all the computers in the network. As I was trying to set up another computer on the network, I refresh my network several times from my Windows 10 computer, and all a sudden all the computers except 1 disappeared on my Windows Explorer "Network". Every other computer in the network has no issues.
See Pic:
I want to emphasize that I CAN ACCESS the shared network computers. It's just that Windows Explorer's "Network" does not show most of the computers!
i have been suffering slow WiFi speeds for a while now and sky have replaced my router.
I have two computers both running windows 10 with the latest build.
Now since i started with this router i have lost my home network and i have not changed anything on the computer.
some times i can see my other computer but not able to connect to it. sometimes i can see nothing. sometimes i can see the sky router and sometimes not. I am not able to see my printer at all on ether computer.
My network is set to private on both computers and file and printing is turned on.
All i have done is plugged in a new router.Sometimes i can see on my network a device called AirTies WAP what is this.
I have two computers running windows 10 and until recently they were both connected via WiFi, but recently after having problems with the WiFi my ISP told me the router should be connected to the master telephone socket.
Until they told me this the router was connected to a phone extension roughly halfway between my two computers, one downstairs and one upstairs. and it has been like that for almost a year with a reasonable speed to both computers, but just recently the WiFi speed has dropped so much it is almost impossible to use it.
So i have moved the router upstairs and connected it to the master phone socket and its so close to my PC i have used a Ethernet wire to connect to the computer and my download speed has doubled to the PC.
But one problem i have now is the other computer is now not visible on the network. so why when they were both connected via WiFi both were visible, but now one is connected via Ethernet and one WiFi they can not see each other.
Also now my router is upstairs the laptop downstairs connected via WiFi is so slow its useless. What to do i know i can get homeplugs but do they really work ...
We have recently updated our four work computers to windows 10. Mine shows none of the network computers or printers under network. Under printers it shows one of our four printers but says driver unavailable and the spooler is not working.
I can get onto two of the other computers using a link under my quick access bar which was set up on our previous windows, so it can go to these computers, but they are not showing up on the network.
I have googled some of these questions and tried control panel/ administrative tools/ services/ to turn on UPnP Device host to automatic but it wont start and comes up with Error 1068: The dependancy service or group failed to start. Similar for SSDP discovery and Print spooler.
Under change advanced sharing options I pick 'turn on network discovery' but it wont stay on/keeps going back off.
I may be able to find a way to get onto the printers I need but would ideally like everything to show up properly under network.
Why suddenly out of the blue my network quit showing one of my computers? I have a tablet and laptop both with windows 10. my tablet still shows both computers, but my laptop no longer shows the tablet. I didn't change anything. What can cause this and how do I fix it?
View 4 RepliesI have DELL Inspiron 14R N4010. Automatic upgraded to Windows 10 Home. Previously I have Windows 7 Home Premium. After upgrade I didn't see the wired network adapter. However my wifi is working fine and can access Internet. I tried to re-install the LAN driver (Atheros AR8152 PCI-E Fast Ethernet Controller Driver); it ask for upgrade/repair/de-install means driver is already present in the system. In spite of that upgraded the dirver (got the upgraded driver setup from Dell). Unfortunately, the device is still not visible in device manager.
View 4 RepliesI upgraded to windows 10 from 8.1, ever since then, my Huawei 173 stopped working. The led light flashes, yet the network signal is not showing, the display hangs and several other issue.
View 1 RepliesI have a Lenovo Thinkcentre preloaded with Windows 10 Pro. Sometimes when I go to File Explorer and click on Network it shows something called "Ralink Linux Client" connected to my home network. When I select its properties the only information I get is it's MAC address. But the funny thing is when I check my router's list of connected devices the Ralink Linux Client doesn't show up on my router's list even though it shows up on Network on my computer. I am using a Buffalo WHR-300HP router. I also have a Thinkpad notebook computer running Windows 7 Pro on my home network and this phantom device never shows up on Network on the Thinkpad. This Ralink Linux Client comes and goes on my Thinkcentre showing up sometimes but not all the time.
I tried researching this on the Web and apparently others have had this problem too both with Windows 7 and Windows 8. But I am reading conflicting information about what might be going on. One forum poster suggested that this means that the router connected to the network is picking up another router within range. Someone else suggested that this is actually something to do with the local router's internal components.
edit - My Thinkcentre is connected to my router via Ethernet. My Thinkpad is connected wirelessly.
I am unable to access the windows store but i can connect to the internet with nearly everything else...
Not a massive issue as I don't use the store much but it is quite annoying as it only happens sometimes.
I believe all my drivers are up to date... the MOBO is a asus b85m-itx..
I am trying to set up our server which we have on my sisters new laptop. when I go to 'map network drive' and click 'browse' the server called 'BGE-B-NAS' doesn't appear on the list. I have tried multiple times and nothing seems to be working. I also tried to type it in manually but it just said that 'windows cannot access BGE-B-NASCompanydata'. Is it to do with the fact that this is a laptop and it is using the wifi instead of being wired?
View 1 RepliesI have several PCs at home as well as music streaming devices such as Pure Sensia and Freecom MusicPal. The PCs run a mix of Windows 7 HP and Ultimate all 64bit. I use Serviio to share music to the streaming devices and PCs. The PCs all use password protected network shares, and I selectively share certain folders from different PCs to enable both simple file sharing and backup which are simple script driven processes.
All has been working reliably for years until (Dum-Dum-Dum!) Windows 10...
A new laptop arrives with Windows 10 preinstalled.
I've got it up and running but cannot work out how to add Microsoft cloud accounts, such as those directly linked to OneDrive, onto the windows 7 PCs to enable password protected sharing to and from this new laptop.
The accounts have the same usernames on each flavour of windows PC, but the windows 10 version also has an email.
I work for a small company, with a network of 25 users. We have recently replaced 4 of the users with new Intel machines.
All of the other machines on the network have retained their ability to print to the network printer after the Windows 10 update, but the four new machines cannot even see it.
I have tried the usual process of adding a printer using the wizard, and also tried locating the printer manually using the printers network address.
The closest I have got is a message telling me that the driver could not be located - i tried connecting the printer directly to a new machine in order to install the driver, before disconncting the printer and trying again through the network. I received the same 'No Driver' message.
It is worth noting that the printers access point to the network is via a Vista machine in the admin department.
I'm finding Windows 10 enjoyable and pleasant for the most part.
Unfortunately, some things that are easy to find or to do (probably due to years of experience) in Windows 7 and 8/8.1 are not easy to find, assuming they exist at all, in Windows 10 build 10130. For instance, I've looked high and low for "Change PC Settings" and it is like the proverbial needle in the haystack.
My present problem is that I can't see other computers in my network/workgroup. They are visible to my Windows 7 and 8.1 computers. My network is set to private in Windows 10. Find devices is set to on.
I note that I can ping all my devices, Squeezeboxes, WDMycloud hard disk, chromecast, computers etc., and the squeezeboxes, Logitech Media Server , WDMYcloud and Chromecast are showing up as devices.
I have an issue on both my Windows 10 laptop and desktop PC. Both are DELL and new. Suddenly, my PC wouldn't connect to the internet using ANY wifi network. For this reason, I eliminated my WiFi modem - because the same issue happened when using my phone tethering. Using the Ethernet cable worked. Then a few weeks later my laptop has the same issue, but with this I can't plug in an ethernet port, because it dosen't have one. Both computers had IP Vanish VPN (probably nothing to do with it but thought I'd mention). I believe these issues happened after updates.
I've tried disabling firewall, antivirus, uninstalling Vanish VPN, using cmd from things I've seen recommended, updated network adapter on desktop.
suddenly none of my computers can log onto my homegroup. They all say one is available, but when I put password in it just keeps running as if it is looking but can't proceed. I am not able to change homegroup either.
View 3 Repliesremotely shutting down pc from another desktop, shutting down other computer is "access is Denied"
View 5 RepliesI have in the past readily connected two computers directly via an Ethernet crossover cable under Win7 and Win XP but cannot get this to work under Windows 10. No specific messages, just cannot see the alternate device from either notebook. make this happen under Win 10 ?
View 2 RepliesOK, so I have this one Windows 10 computer.
When trying to access a Windows 8 computer under "Network", it prompts me for a user/pass.
All other computers (Windows 7/8) can see the public folders of each other no problem; even the public folders of this one Windows 10 computer!
