Networking :: Connected To Network But Secured No Internet?
Jan 30, 2016
I was having some network problems and in the course of fixing them I uninstalled the network driver for my TP-Link AC600 Archer T2UH USB network card. This card has been working without a problem for months on 2.4 and 5Ghz channels and at high speeds > 150Mbps. When I attempted to reinstall the drivers, I can get connected to the WiFi but I get the Windows 10 message "Secured, no internet I have tried numerous drivers and I have now tried to connect using two separate NIC cards. (I had an old 802.11n usb adapter) as well as a 5Ghz wireless bridge that I used to use that connects to the PC via ethernet. All of these have connected to the network, but I get the same "Secured, no internet" message.
The only thing I can think of at this point is that I've somehow screwed up the adapter. I've looked at that ipv4 settings are they are all set to "Obtain an ip address automatically" and do not have a DNS name specified. I have attempted all the windows repair options as well and they return telling me their may be something wrong with the driver or the adapter. I'm at wits end.
My laptop is indicating that it is connected to my home network and that it has internet access but when I go to the network center it says that it doesn't have any connections. Attaching an ethernet cable doesn't work (which was an earlier problem too) I already updated my drivers and ran the troubleshooter but it didn't work. I also restarted my router so I did most things I can. Side note: It happened really suddenly from one moment to the other...
Recently my laptop has a boot error and auto recovery and maintenances could not solve the issue. So I reset the laptop but kept the files and now it boots perfectly fine however none of the internet is working. It shows that I am connected to the wifi but there is no access whatsoever. I even uninstaled my network adapters and even tried a wired conmection and everything seems to not work. All my other devices are connected to the router perfectly.
I am using a lenovo y50 touch with windows ten 64bit.
I have already tried updating drivers, deleting temp files, disabling firewall (antivirus was removed from reset), and already tried the ip config release and renew.
I am connected to the internet, but in the toolbar it says Not Connected and Connections are available.
I am referring this to the Wifi Icon on the Bottom Right Corner near the Clock (Notification Area). There is no yellow asterix and I am properly connected to the internet. When I click this Wifi Icon , a window pops up and on its top it shows my ssid and below it shows connected.
Disconnect option is also here.
I have already changed my Wifi adapter - previously it was Wayona and now I am using Prolink. Both works well.
I'm connected to the WiFi, but I can't access the internet. I was trying to fix my rocket league connection so I followed this tutorial to reset the internet options of internet explorer and then to restore the options. I restarted my pc and now I can connect to my WiFi but none of my browsers or applications can access the internet.
I got a new IBM Lenovo about a month ago that was running Windows 8.1. Before doing anything I immediately upgraded it Windows 10. When I hover over the network icon it says "Not Connected-Connections Available." The thing about it is, is that I am connected to the network and the Internet. I did update the network card driver today. I thought that would solve the problem, but I'm at a loss. It wasn't really a big deal until I wanted to connect to twitter and the weather apps that pop up when you click the Windows button in the lower left corner.
I am now encountering a series of bugs that i've never seen before in any windows.
OS: Windows 10 Pro official 64 Connection type: Wifi, no firewall activated
Applications impacted: Steam unable to connect, Google chrome unable to connect to install software, Mozilla Firefox same thing, and probably more apps get the same problem but i can download them and install if the installer doesn't have to download anything. It seems like a services that is not working inside windows installer.
I am able to navigate in Microsoft Edge, and some other apps, but unable to install other application, it is like the firewall is blocking the internet acces but the problem is no firewall are activated right now , nothing has been changed to the router settings as other computers on windows doesn't experience that problem. See screen captures below...
Screenshot 1 : it says check you firewall setting to put chrome to your white list
Screenshot 2 : your download has been interrupted, click ok to continue ( nothing has downloaded not even 1% )
Screenshot 3 : it's in English already just read...
Roughly half the time I restart my PC I am told I am not connected to the internet, the Ethernet icon in the notification area shows a yellow triangle. but the thing is I am connected just fine and can access everything I normally do. Even microsoft.com. So this shouldn't be a problem if I can access all my stuff right? See things like Office and Skype use whatever detection method that is failing to determine if things can be sync'ed. The only answer I have is to reboot until the little yellow triangle goes away. There has to be a better way.
I am having this issue with a Surface Pro 3 on a dock, that when it is plugged in to a certain port it doesn't recognize the internet connection. If I take the surface to a different port and plug it in it works, if I get a different surface and plug it in to the port I am working with it works. Its only when the surface I am working with is plugged into that specific port, that it doesn't work. I need this surface plugged into this port, I can't plug it in anywhere else.
I have tried updating drivers, changing the dock, and also plugging in a USB to Ethernet adapter to bypass the dock. Nothing has worked. I also can't just get a different Surface because I don't have another surface with Win 10 on it. I need to have this Surface connected to this port but it will not work.
But I'm currently browsing the internet and typing to you.
In fact - I can do virtually everything (League; Steam; Skype; etc) except use any OS feature that requires logging in - e.g. Mail, User Accounts, Shop, etc. Then it says something along the lines of "Cannot use this service without an internet connection - please connect and try again." When I run Network Diagnostics as the prompt recommends - it says I am connected and cannot find a problem.
It doesn't always happen - but it seems to be determined on start-up. If I restart it now it might be working next launch - but 75% of the time it will encounter the same issue. It's been happening for months now but I've sort of gotten used to using my phone to check my emails - but I've now encountered an issue with one of my hard drives being unable to be searched (tried indexing, etc) and the only step I've found that I haven't tried says it could be a corrupted user account - but I cannot update my user account without "connecting to the internet". -_-
The system is up to date. No driver updates available.
If I go to the network and sharing center on one of the computers on our home network it reports that it is not connected to a network, but this system can see other computers on the network and access the internet. The other computers cannot see this system, however. This system has an older X38 motherboard with an E8400 processor, but the initial in-place upgrade from Windows 7 had no problems at all.
I didn't notice the problem until I realized that about two weeks of backups across the network had failed. I have tried the repair tools in Windows 10 and have uninstalled and reinstalled the network adapter without success. I was hoping that the problem would be fixed by installing the recent big windows update, but windows update reports that it cannot connect even though I have internet access.
I have two computers running Windows 10 Pro Technical Preview Build 9926. One computer is a desktop and it is working perfectly. The other is a new HP 15-F039WM laptop and it came with Windows 8.1 With Bing installed and it also works perfectly in Windows 8.1 mode. I resized the hard drive on the HP laptop to free up 150Gb of space and then installed Windows 10 TP Build 9926 from DVD. It still works perfectly when I use dual boot to go into Windows 8.1. When I use dual boot to go into Windows 10, the network icon in the system tray says "Unidentified network - No Internet access". I did swap cables, etc, but I knew that wouldn't work because the laptop does have Internet access when booting to Windows 8.1.
I read through some threads here after searching for DHCP and connectivity issues and even tried some of the suggestions such as using regedit to look at the network profile. There isn't a network profile. It is displaying a 169... IP Address, so I know that it isn't getting an IP. I tried to manually add the correct settings that work for Windows 8.1 (192.168.0.15 with 192.168.0.1 as the Gateway), but that fails.
My aunt did the free Windows 10 update from Windows 7. After the update she had no internet connection so she decided to roll back to Windows 7. After the roll back, she still has no connection. Her connection icon says "unidentified network" and will not connect to the internet. It is plugged directly into the modem.
I have suddenly noticed a problem with internet connection. I cannot download any apps from Microsoft store (with unknown error message). Strange is that each other software (cloud clients, browser, ....) works perfectly.
I have already searched for solution on google and found command wsreset.exe but this did not work..
I have also tried network troubleshooter. It has found these errors:There is one or more missing network protocols. Windows sockets registry entries are missing
I have tried to repair these errors with some netsh commands, which actually did something but did not solve anything.
Another solution is to reinstall network drivers but this did not work either.
I'm on Windows 10 x64 and my network device is a Intel GbE LAN chip (10/100/1000 Mbit).
My issue is : I have a yellow triangle over the network icon in the notification area and it says me "Network : No Internet" even if i can access to internet and my network works perfectly.
That's not very serious issue but that's disturbing to know if i'm connected or not (real disconnections can happen). After trying to reboot my rooter and uninstalling/reinstalling Intel's newest drivers i don't know what to do.
For some reason the Airplane mode setting can not be turned off in Network and Internet Settings, Network setting from taskbar, or Action center from taskbar. I am using my desktop and will never have it on an airplane. However, the computer does have a wifi adapter which I could use and it is able to be enabled.
Also, have other wifi devices on my home network, another PC and a tablet, a wireless printer and all are working fine. It must be a 'bug' on the desktop but someone should know that it is there. On the other PC, which is an all in one, the Airplane mode is not even in the settings anywhere.
I've been getting the following error : "The group or resource is not in the correct state to perform the requested operation" Things I've already done trying to solve the problem:
1) Clean install of Windows 10.
2) Made sure my WiFi network card doesn't go to Sleep, by disabling that option in the Power Management.
3) Have set hosted network mode to allow
4) Made sure that my network with internet access is set to sharing
Additional info: It was working fine untill some random windows update, after which the PC started getting BSOD when trying to host a network. Reinstalling drivers started giving me this error instead of BSOD. Then I rolled back to windows 8.1 and checked again. It was working flawlessly. I assumed it to be a driver problem, so I upgraded to Windows 10 again and this error is back.
I have been using a wireless connection but have decided its better for online gaming if i go wired/ethernet.
I am having a problem "unidentified network/ No internet access"
Now in the past with an xp pc i connected the ethernet cable and that was it i assumt there is some sort of set up i need to do for win10?
Also it may be worth letting you know i am not directly connected to the router via an ethernet cable, i am using the plug in things that sends the signal down the house electrical wires. Maybe this is an issue although it wasnt on my xp pc.
Ever since build 10130, Windows Search claims to not have access to the internet, yet my laptop DOES. I checked if my internet wasn't kidding me by searching up random shit on Google Chrome, and it turned out that god dam Windows Search was lying. I DID have access to the internet. Plus, when I try to search for an app on my PC, the Search Menu's background is just blank- nothing shows up! Tons of updates later- the problem still exists. I hope I'm not alone.
I am having trouble with my DNS. I can connect to the Internet. I can ping all devices from my NIC to the default gateway, I can even ping other networks if I have the IP address. This includes Google's 8.8.8.8, but when I try to ping URL..., it cannot find the host. I have tried virtually everything I know and what my IT network professional friend knows. I have all the correct drivers. This all started about a month ago when I lost my LAN connection after a Windows 10 update. Then a couple weeks later I lost WiFi. Here is what I have tried so far:
-Any and all ipconfig commands -Set Google DNS as my DNS -Full reformat with clean install of Windows 10 -New wireless adapter (Sabrent NT_WLAC 802.11ac USB WiFi adapter) -New Ethernet cable -Uninstall and reinstall drivers for LAN and WiFi
I logged onto my laptop as usual this morning and opened up Firefox. However, on trying to open a website it responds as of I'm not connected. My WiFi says 'no Internet, secured'. I tried the mac and it has the same connection issues, but for some reason I can use the WiFi on my phone alright?
I'm having one problem in Windows 10. When I connect my computer to the internet using a switch, it loses connection after a few minutes, but if I connect it directly into the router it work's just fine. Before the update to windows 10 I had no problems at all using the switch.
My internet worked fine and I didn't do any changes to it up until it stopped working. I've managed to fix the internet access to allow me to access the internet on my laptop through wi-fi but network access still says no internet access. Websites work however ethernet does not work! I can't connect online on my playstation because ethernet doesn't work. I've tried disabling and enabling the ethernet. I checked the cables, I re-installed the drivers and i turned off and on the router more than I could count.
The internet works on my laptop however a connection test on my playstation 3 says obtain ip address succeeded and internet connection failed. So I can't play online. I am absolutely certain the playstation 3 is not fault as I checked vigurously the settings and I've put in the right connections, however it still does not work? Should I buy new cables for the router?