I have been using this version of windows 10 from last 1 month. I installed all the drivers and everything was working just fine. From last few days my wifi driver isn't responding. I tried reinstalling the driver but the problem still exists.
I can connect through the Ethernet cable and the Bluetooth driver is also working. Only the wifi driver has stopped.
My laptop is Dell inspiron 5520
I recently upgraded my Dell 2320 Inspiron all in one to Windows 10 and since doing so I am greeted with the limited internet connection problem (wifi). I have tried the TCIP reset suggested in another forum I read however this has not resolved the issue. What I can do as this is my home office computer.
View 1 Repliesi have a killer e2400 network adaptor over a wired connection on my msi motherboard. Unfortunately, out of the blue it has stopped working. I constantly get the error message "Ethernet doesn't have a valid IP configuration." I have tried a number of things such as stopping and restarting the services in computer management. Nothing appears to work. I know my router works as I'm using it now on another computer.
View 2 RepliesWhen I select "Camera" I get a white box, with one word printed in the upper left hand corner,"Camera". This appears for two seconds and then I am back to my desktop picture.
View 5 RepliesI own a Dell Inspiron N5547, updated from W8.1 to W10 Pro a few days back. The Dell Touchpad came installed with the upgrade, and for the first 2 days, all the gestures were working perfectly. On the third day, the three finger scroll up (for task view) stopped working and invokes Cortana instead. I went on the Dell Touchpad program and tried to untick the three finger tap for Cortana, but to no avail. Its really annoying, I tried to restart my latpop but faced the same problem.
I tried to search for solutions, one included uninstalling the Dell Touchpad from Programs and Features, then downloading the latest version from the Dell website. I did so, and installed it again, and once again for the first day the three finger scroll was working perfectly, but when I woke up the next morning, it started invoking Cortana again.
I have dell Inspiron 3537 Laptop recently update in windows 10 before it was using windows 8.1 that time my laptop gesture touch pad was working when I scroll in our touch pad with 2 finger it was working but now is not working. My touch pad driver already installed and update.
View 1 RepliesI got a new Dell this year, which came with Windows 7 (Dell Precision M4800), and it was working perfectly until the Wi-Fi stopped working. After hours of research and troubleshooting and updating, I figured out that the one and only reason my WiFi wasn't working was because my hardware WiFi switch was not working. In other words, even when I switch it into the on position, it still stays off.
With Windows 7, there was a convenient fix: go into my Bios, go into the wireless category, and tell the Bios to ignore the WiFi switch. This fix worked, and I forgot all about the problem until I upgraded to Windows 10. The WiFi stopped working again. So I went through all that hullabaloo of updating things, and nothing worked. So I isolated the problem to the WiFi switch.
I went back into my Bios, and found a disclaimer: For Windows 8 systems, the Bios does not affect wireless capability because they use their own OS drivers. In other words, for Windows 8 and up, I can't use the Bios to ignore my broken hardware switch. Here is my question: aside from replacing my WiFi switch, is there a way to turn wireless capability on in Windows 10? Is there a way to make Windows ignore the hardware switch?
I went through hours of customer support as well, and 40 minutes after I told them my switch was broken, they told me, " It appears to be a hardware issue." I do like a laugh, but I actually need my WiFi, I am temporarily downgrading back to Windows 7 until I can resolve the issue. But I really do like Windows 10, so I'd like to go back to it asap.
I had been under the impression that if you had a PC with UEFI (instead of the legacy BIOS), you couldn't boot from a CD or DVD drive. Having just gotten my first PC with UEFI, I was delighted to find this Dell article on how to do it here:
[URL]
I followed that procedure on my new Dell Inspiron 15 5559 laptop, and booted Linux Mint successfully from the DVD I have it on. One of the considerations is that you have to disable "secure boot". Not ever having had that before, I didn't hesitate to do that. I imagine that would be a handy feature if you were worried about boot sector viruses, but I've never seen but one instance of one in 35 years of working with PCs, and that was on a neighbor's PC. I also noticed that booting was considerably faster.
I've just done a clean install of W10 on my Dell Inspiron 7537 laptop. I turned off the laptop last night when the battery was about half discharged.
I tried turning on the laptop today after it had been off 18 hours and it was completely dead - there was no response to the power on button and no charging light despite the charger outputting the correct voltage.
I read online about removing the battery so I did this. I removed the battery, pressed the power button for 60s then plugged in the power lead and hey presto the laptop started! I then put the battery back in and started W10 fine. The battery showed 56% charge so the battery wasn't flat.
I can only think there was a poor battery connection which prevented the laptop starting and removing and replacing the battery cured this.
As the title says how exactly do you achieve this?
I have an ISO Ran RUFUS 2.6
GPT Partition Scheme for UEFI
Fat 32
8192 Default
X Quick Format
X Create a bootable disk using
X Create Extended label and Icon Files
so the next part is the Kicker Dell did a number on their Bios and rather than using standard logic as we have done so many years just setting the boot order to "Boot USB" first, you "Only" have the option to create a "Boot Program"!!! so you select your USB Drive then which ever file you want it to boot I'm Assuming? So I tried selecting Setup, bootmgr.efi, and autorun with no results!
I get the secured boot error crap, turn that off and I get Legacy BIOS (that defeats the entire point) What the hell happened to Win95 Boot Discs and FDISK?
I am so frustrated with this garbage, I found out the hard way with Windows 10 and trying to nuke the SSD and put a clean install of 8.1 on it.
I just upgraded to Windows 10 and lost my audio output device.
View 3 RepliesI have a relatively new Dell Inspiron 7000 series (7548). Installed Windows 10 and about 15 seconds after logging in I keep getting an error message about an internal power failure. What an absolute f#$% up. I have never had a problem with the laptop. I tried the Restore System Point option but it says that there aren't any system points saved.
View 9 RepliesOn my wife's AIO (Dell Inspiron One 2330) the Start menu wasn't available on her non-admin user account(but was ok on my admin user account).My XPS8100 wouldn't awaken from sleep properly (labored without real progress).I reinstalled Win10 on both PCs last night (about two hours each) and all is well. Here's the link: URL....Use the Download Tool Now button and follow the simple instructions.
View 3 RepliesSo, I was updating the graphics driver, and the computer rebooted itself, when it turned back on all I saw was my chosen accent color in the frame of my main monitor (I have 3). I then turned off the computer, removed the card, and plugged one of my displays into the MOBO. The PC booted just fine, and ran normally. I turned off the PC, and put back in the graphics card and booted back up, I got the same thing. I'd been meaning to do a system refresh, so I chose then to do that. I did the refresh, and now whenever I have the card in the PC, I get stuck at the HP Boot screen (not letting me enter the BIOS) and the PC beeps once, then not again. I turn off the PC, remove the card, and Windows runs perfectly.
View 1 RepliesAfter updating win 10 from 8.1, am getting the frequent pop when ever i use the touchpad. (pic attached)
1) Resinstalled driver, still popup continues
2) using autorun app, i have tried to remove the entry (It stops the popup but the Dell touchpad utility is not starting up, so I cannot use the scrolling and the gesture support)
3) Again I turned on the services from autorun, popup came again
4) Tried cleaning registry by ccleaner, still the issue persists.
5) Tried to reset windows, but tat also not happening (boot device failure)
Laptop : Dell Inspiron 5547
Driver : Synaptics touchpad driver V19
OS : Windows 10
I have an ASUS laptop X751L.
Yesterday the USB ports and wifi stopped working within a couple hours of each other.
When plugging in a USB device the laptop makes an audible signal that it picks it up but nothing happens after that.
I have Windows 10 installed on it.
I have just replaced my WiFi card from (BCM943228HMB) to BCM94352HMB. Before replacing my WiFi card i done the following:
Made computer boot in safe mode with networking.
After that i replaced the card, then booted into windows 10 (safe mode with networking) and checked device manager. Everything was OK (See attached picture). I then tried to turn on WiFi, but it does not turn on.
I'm not sure if it's related to the last update or not, but suddenly my homegroup started saying my other PC was offline. So I went and left it and recreated it, and sometimes it'll connect for maybe 5 minutes then disappear again. Also, it's saying almost everytime I try to join that Windows No Longer Detects a Homegroup on this network. Very strange since it's showing it. I can get to the other computer via the Network icon so it's not a disaster, but this is a frustrating issue.
View 1 RepliesI know this problem has been discussed with many variants but not quite the same as I'm experiencing, so I'm starting a new thread.
I did a clean install of Windows 10 pro 64 bit, and everything was running perfectly, that is until two days ago when the computers on the network simply disappeared. I had done nothing with changes or new software or anything of that sort.
I checked network discovery and it was on, but the only computer showing was the home computer. I have tried turning discovery off then rebooting and then back on again and rebooting. In all cases the network drives are accessible. I have manually entered the computer name in the address bar of File Explorer eg "//COMPUTER2" and then I can go and enter the other computers manually. Everything will stay there until I close down File Explorer and then they disappear again only shown the home computer.
after installing a replacement GPU, RDP now only connects to the home server when i have "use all my monitors" enabled.If i have it unticked the session will try to open on my second monitor - which is connected to the onboard GPU, unlike the first, which is connected to the discrete one - as usual, but blurt out a connection error after starting to render the remote desktop.If i tick "use all my monitors" in RDP settings, a connection is made, but displayed on my main screen.
View 2 RepliesI upgraded to windows 10 from 8.1, ever since then, my Huawei 173 stopped working. The led light flashes, yet the network signal is not showing, the display hangs and several other issue.
View 1 RepliesI've never seen this problem with the previous O.S., Windows 7, but Windows 10 is throwing me this error message approximately 70% of the time when I run the network troubleshooter...either from the Control Panel, or by right clicking on the task bar's connection icon.
Though Win10 is the first O.S. to give me this error, the Microsoft support forums indicate that it's been fairly annoying to Windows 7 users back to 2010. Also, Microsoft support employees just give vague general tips for trying to nail down the cause.
I'm only experiencing this in EDGE. Edge sometimes freezes on a webpage when I'm attempting to post a message to a forum, similar to what I'm doing now. I run the Network Troubleshooter and get the "Native Host Has Stopped..." error. I open a new Edge tab, come to this forum and try to do a search for the answer, but this forum's search function ignores my input. So, I opened IE-11, navigate to Win10 forum, and all works well.
Experienced the "Scripted Diagnostic Native Host has Stopped Working" error when running the network troubleshooter?
When I boot up I cannot get connected to my WiFi. The only way to get it to work is to shutdown and boot up again, then all is well.
I never had this problem until Win 10 upgrade.
I have a HP pav 500 something or other and it cannot keep a stable connections ( for more than 2 seconds) to my wifi. The wifi card is a Qualcomm Atheros AR9485 802.11b|g|n WiFi Adapter and always worked well before i installed Win 10.I got fed up tryin to fix driver issues so i bought a usb wifi card. It is ment to relay 150mbps but mannages 1-2 Mbps. i have speed tested my phone on wifi in the same location as my HP pc and my phone recieves 35Mbps.i have tried updating the drivers but all seem up to date.
View 2 Replies When I first installed Win 10 it was working great got my wifi connection working and everything now it seems I cannot get connected. I have tried several times, putting it mildly. I put in the Modem/router address and password and then I go to the site that shows you the wifi connections and mine is not there. But there are about 10 or 12 that are there. I have tried this several times like I said. And I have rebooted to see if that did anything and it made no diff.
It seems from some of the reading I have done this might be a problem caused by an update. It worked great for several days. And while I am thinking of it can you delete all those other wi fi addresses some how.
Product Name: Hp Omen 15
Operating System: Microsoft Windows 10 (64-bit)
Wifi card: Intel Wireless-N 7260
since some days my wifi has stopped working.If I click on Wifi icon it shows only ONE (max two) NETWORK:And I live in a building with 20+ networks, as you can see from WiFi Analyzer (I'm the red one on the right).If I deactive/reactive Wifi with fn+f12, it goes to Airplane mode and to Wifi mode again and it eventually shows all the networks/My Wifi is on the top. If it's saved, Windows connects to it and then it drops the connection; if it's not saved and I try to connect, it says "You're not able to connect to this network".The fun fact is that after some seconds every network disappear and only one is showed (probably the neighbour one..I dunno).
I've already tried to HARD-RESET the notebook keeping the power button for 10/15sec with the laptop turned off.I've already tried to follow these instructions [URL] ... updating drivers (Intel 18.12.0.3, 18.12.1.2, 18.30.0.9 [Windows 10 default], 18.32.0 [Lastest drivers]) with no success. Everytime I install a new drivers, I uninstalled the previous one + Wireless software + reboot.
I tried to uncheked "Allow this computer to turn off this device to save power" on my Wifi hardware settings without success.The HP Network support says I didn't choose a Wifi (Really? The problem is I don't see my Wifi on the list!).This is not related to a new Windows 10 upgrade since I've installed it months ago and It's the first time I've this problem :/ It always worked
I tried different settings too/I changed channel, I set 802.11g on my router, APSD off on the router.I set "Magic packet off, ad hoc QoS off, U-APSD off, fat channel off,incremental throughput off, HT mode off" on the card setting without success. Nothing chaned.The Hardware test doesn't detect any failure. If I go close to the router, it shows my network with full power connection and it connects to it. Then I go back to my bedroom (probably 3/4 meters far), it KEEPS the connection for 30/40min and It drops the connection and I can't reconnect to it anymore. It always worked perfectly in my room in these months (I bought it in March 2015), so the distance is not a problem, I'm 6/7m far from the router.In this case It shows my Network (Connected) and the neighbour network...and the other 20+ networks???
The only way I have is USB tethering with my Nexus 5.I tried the Wifi connection on Elementary Freya (Ubuntu linux based OS) and it shows 20+ networks available on the list. It has not connection problem with my Wifi, but sometimes it stops working, the webpages stop loading and I must reboot Wifi to reconnect to it (usually after 30/40min using it).What's the problem? Is my Wifi card broken?
