Networking :: Drive Not Showing Up When Trying To Map A Network Drive (Laptop)
Dec 26, 2015
I am trying to set up our server which we have on my sisters new laptop. when I go to 'map network drive' and click 'browse' the server called 'BGE-B-NAS' doesn't appear on the list. I have tried multiple times and nothing seems to be working. I also tried to type it in manually but it just said that 'windows cannot access BGE-B-NASCompanydata'. Is it to do with the fact that this is a laptop and it is using the wifi instead of being wired?
I just bought a new hard drive from best buy, its a western digital Blue 500gb hard drive, the old one was failing and causing windows to run slow so I bought this one to fix it. When I try to install the new OS into the blank hard disk it doesnt show up on the list, nothing does.
my Windows 10 Enterprise PC cannot access to my company's network storage at 10.63.0.250. In the previous edition like windows 7 or 8, I can access easily by enter 10.63.0.250 in the Address box in File Explorer or in Run windows (Window button + R). However, I have got trouble since I upgraded to Window 10. The notification is "The network path was not found", although I can ping to this and another PC can access the network storage in File Explorer.
Today i did a fresh install of win 10 Home today on my laptop but i'm unable to see my NAS Drive in my network. I can put the nas address into the address bar in my Network and i can access it but i don't like to do it that way. I also use Kodi media center and now my nas is not showing in my network i can't add media content.
On my desktop (AKA S4, currently running Win8.1 x64 pro) I have shared out four of the hard drives with full permissions. I have 5 PCs in my network and all can access the four drives. My sister is visiting and currently accessing my network via cat5 wire. On her PC (running Win 10 x64 pro) if I view the network in Windows Explorer I can see my desktop (S4). When I double-click on S4 I'm prompted to enter network credentials. "Enter your credentials to connect to: S4" I entered my logon S4 ID and password but it tells me that the user name or password is incorrect. What the heck should I be entering? All computers are part of the same work group (WORKGROUP) and all computers are wired connected. All computers can access the internet.
I have a usb connected hard drive connected to my Bell 2000 router. The instructions to access this drive is to go to the Documents folder and enter mynetwork. This then shows the shared hard drive as mynetworkNETWORKHD. If I now click on NETWORKHD I get the following:
mynetworkNWTWORKHD is not accessible. You might not have permission to use this network resource. Contac the administrator of this server to find out if you have access permissions.
Not enough storage is available to process this command. This all worked for me under Windows 7. I am unsure if it ever worked under Windows 10.
If I plug a 2 gb thumb drive into the other port on my Bell 2000 rounter it works without any problem.
I recently set up a Homegroup on a Win10 laptop so I can see another PC on the network. That PC is running Win8.1, and I would like to use it for file backup. The devices are visible on both ends of the network and have connectivity, but when I choose to use the File Backup function from the laptop, nothing transfers and eventually I have to restart because of no response from the system. Also, my browser will stop working. I have added the PC as a network location and specified the location for backup, but is has locked up twice now. Could this be a routing issue? I previously ran the auto backup feature to a memory card, but need more space.
I have some harddrives on a "server" computer in my home-network running win 7. From my "client" running windows 10 I am mounting these drives using
psexec server -u username -p password -d net share F=F: /GRANT:user,Full /GRANT:media,read 2>nul net use F: serverF
Today my client crashed and I had to remove the graphics card. Since then I cannot enter my network drives anymore, the commands seem to run, but when I try accessing the drives I get a message indicating I should put a media into these drives. Also, I cannot mount them manually using "map network drive" since the drive letters are not available.
I tried removing them from HKEY_LOCAL_MACHINESYSTEMMountedDevices (they are listed there as "DosDevicesF" etc.), but once I restart, they are there (in the registry) again.
how I could fix this? Win10 somehow seems to remember that thes drives once have been there before and keeps blocking the drive letters...
I have a NAS (WD MyBookLive) which cannot be accessed in Windows Explorer on my brand new Surface by IP address (or name- though that doesn't work on any of my devices for some reason). I can access the config page in my browser by IP, and two other Win10 devices on my network can access the NAS by IP in Explorer fine, and I can access other devices on my network by IP fine on the Surface but for whatever reason only this computer can't access that NAS in Win Explorer.
I just got the Surface yesterday and was able to access the NAS fine, the only thing that's changed is I renamed the device and restarted and since then haven't been able to connect. I've restarted both the PC again and the NAS but no change.
My laptop doesn't boot because OS is on E: drive instead of C: drive
When I try to boot it up (it somehow boots up as windows 8.1 instead of my OS windows 10), it gives a BSoD and shows the error code 0xc000021a. I created a bootable USB drive with windows 10 pro on it, but it shows my OS as windows 8.1 instead of 10, and it doesn't allow me to restore or do a startup repair, because they both fail.
my cd drive icon was showing and working then stopped showing up. I did as much research as I could and purchased AVG driver updater and it worked for a few days and won't work again.
We have recently updated our four work computers to windows 10. Mine shows none of the network computers or printers under network. Under printers it shows one of our four printers but says driver unavailable and the spooler is not working.
I can get onto two of the other computers using a link under my quick access bar which was set up on our previous windows, so it can go to these computers, but they are not showing up on the network.
I have googled some of these questions and tried control panel/ administrative tools/ services/ to turn on UPnP Device host to automatic but it wont start and comes up with Error 1068: The dependancy service or group failed to start. Similar for SSDP discovery and Print spooler.
Under change advanced sharing options I pick 'turn on network discovery' but it wont stay on/keeps going back off.
I may be able to find a way to get onto the printers I need but would ideally like everything to show up properly under network.
I recently upgraded the 3 machines on my home network to windows 10 home.
Currently when I open up "this PC" and click on network, only one of the 3 computers shows up, and this machine is not the local machine on 2 of them. However If I type in the UNC address for the other machines I can access them.
If I set up a home group all the computers show up in the home group roll out under "this PC" but still not in the network.
Something else that is strange. If I look at "network and sharing center" two of the the computer see one private network name and the other one sees a different name.
Why suddenly out of the blue my network quit showing one of my computers? I have a tablet and laptop both with windows 10. my tablet still shows both computers, but my laptop no longer shows the tablet. I didn't change anything. What can cause this and how do I fix it?
I have DELL Inspiron 14R N4010. Automatic upgraded to Windows 10 Home. Previously I have Windows 7 Home Premium. After upgrade I didn't see the wired network adapter. However my wifi is working fine and can access Internet. I tried to re-install the LAN driver (Atheros AR8152 PCI-E Fast Ethernet Controller Driver); it ask for upgrade/repair/de-install means driver is already present in the system. In spite of that upgraded the dirver (got the upgraded driver setup from Dell). Unfortunately, the device is still not visible in device manager.
I upgraded to windows 10 from 8.1, ever since then, my Huawei 173 stopped working. The led light flashes, yet the network signal is not showing, the display hangs and several other issue.
I have a Lenovo Thinkcentre preloaded with Windows 10 Pro. Sometimes when I go to File Explorer and click on Network it shows something called "Ralink Linux Client" connected to my home network. When I select its properties the only information I get is it's MAC address. But the funny thing is when I check my router's list of connected devices the Ralink Linux Client doesn't show up on my router's list even though it shows up on Network on my computer. I am using a Buffalo WHR-300HP router. I also have a Thinkpad notebook computer running Windows 7 Pro on my home network and this phantom device never shows up on Network on the Thinkpad. This Ralink Linux Client comes and goes on my Thinkcentre showing up sometimes but not all the time.
I tried researching this on the Web and apparently others have had this problem too both with Windows 7 and Windows 8. But I am reading conflicting information about what might be going on. One forum poster suggested that this means that the router connected to the network is picking up another router within range. Someone else suggested that this is actually something to do with the local router's internal components.
edit - My Thinkcentre is connected to my router via Ethernet. My Thinkpad is connected wirelessly.
Had phone system upgraded recently where I work. Router and phones where installed and right away half the computers where unable to connect to the server and the network printer is completely inaccessible.
All computers have new IP addresses now and only some of them are able to connect toe the server. The IP address for the printer times out when I try to ping it and it is the same for the old IP address of the server. These settings where not changed when phones where installed. The server still lists the old IP address on old Ethernet port but now has a new Ethernet port with new IP address that is being used by the working computers. Disabling this new Ethernet port disables all access to the server.
Trying to map the network drive with some computers does not work and says that the folder is not valid on windows xp or that windows can not access the folder on windows 10. On the working computers I can map the network drive normally with identical commands.
hard disk of a laptop with windows 10 used as external USB drive to another laptop and it workded but there are some problems that display is poor and shows windows is not activated but in my previous samsung laptop it was activated when i downloaded it freely from Microsoft. Other things are going smoothly till now.
I recently upgraded from Windows 8 to 10. Post upgrade I have just realized my DVD Drive is not observable/findable in the File manager. It is also not observable in the device manager.
It is however, powered up and is recognized in the BIOS Menu as Sata 4 and recognized by the computer as Boot Device one.
The computer will boot from the DvD Drive if I put a bootable DVD (my old windows 8.1 disc in this case) in the drive, I just tested this.
I upgraded my laptop from windows 7 to windows 10 with the free upgrade that came out a while back. I recently bought an Ethernet cord to enhance my gaming performance, but when I plug it in it says identifying for a little while then says unidentified network no Internet. My friend came over and tried it on his laptop and it worked for his Windows 8.1 . I have a Comcast router/modem combo and have it hooked to a western digital router which is what the Ethernet cord is run from.
