I have in the past readily connected two computers directly via an Ethernet crossover cable under Win7 and Win XP but cannot get this to work under Windows 10. No specific messages, just cannot see the alternate device from either notebook. make this happen under Win 10 ?
View 2 Replies
I have two computers running windows 10 and until recently they were both connected via WiFi, but recently after having problems with the WiFi my ISP told me the router should be connected to the master telephone socket.
Until they told me this the router was connected to a phone extension roughly halfway between my two computers, one downstairs and one upstairs. and it has been like that for almost a year with a reasonable speed to both computers, but just recently the WiFi speed has dropped so much it is almost impossible to use it.
So i have moved the router upstairs and connected it to the master phone socket and its so close to my PC i have used a Ethernet wire to connect to the computer and my download speed has doubled to the PC.
But one problem i have now is the other computer is now not visible on the network. so why when they were both connected via WiFi both were visible, but now one is connected via Ethernet and one WiFi they can not see each other.
Also now my router is upstairs the laptop downstairs connected via WiFi is so slow its useless. What to do i know i can get homeplugs but do they really work ...
Debug report attached.
debug-sc-x301-xxxx.zip
I have several PCs at home as well as music streaming devices such as Pure Sensia and Freecom MusicPal. The PCs run a mix of Windows 7 HP and Ultimate all 64bit. I use Serviio to share music to the streaming devices and PCs. The PCs all use password protected network shares, and I selectively share certain folders from different PCs to enable both simple file sharing and backup which are simple script driven processes.
All has been working reliably for years until (Dum-Dum-Dum!) Windows 10...
A new laptop arrives with Windows 10 preinstalled.
I've got it up and running but cannot work out how to add Microsoft cloud accounts, such as those directly linked to OneDrive, onto the windows 7 PCs to enable password protected sharing to and from this new laptop.
The accounts have the same usernames on each flavour of windows PC, but the windows 10 version also has an email.
I have a desktop PC running Win7 64Bit Ent. It's not actually in use, so nothing is connected. I also have a laptop running Win10 64Bit which I'm using to type this post. I have some audio files on my desktop that I'd like to pull off of there, and put them on my laptop, and then maybe on a cloud. My 1st question: Is it possible to simply use a USB cable between 2 USB 3 ports if I simply power up the desktop with the USB cable connected? Does the USB protocol provide for me to see those HDD's on the desktop via the laptop? I'm quite limited for physical space, and I don't need the desktop to be running permanently, I just need to get these files off of it. If that's NOT a solution, what is the next easiest method?
View 6 RepliesI work for a small company, with a network of 25 users. We have recently replaced 4 of the users with new Intel machines.
All of the other machines on the network have retained their ability to print to the network printer after the Windows 10 update, but the four new machines cannot even see it.
I have tried the usual process of adding a printer using the wizard, and also tried locating the printer manually using the printers network address.
The closest I have got is a message telling me that the driver could not be located - i tried connecting the printer directly to a new machine in order to install the driver, before disconncting the printer and trying again through the network. I received the same 'No Driver' message.
It is worth noting that the printers access point to the network is via a Vista machine in the admin department.
I have two Win 7 computers on my wired network and 6 Win XP computers on this same network. This main computer was Win 7 and just upgraded to Win 10 in November. For a year this network has worked just fine, plug and play basically when I set it up, now after Christmas shutdown (2 weeks), I can't see any of the computers on this network. The only thing I can see is the media drive on a computer called 6Head2. All I really do is transfer files from this main computer out to those 8 other computers.
What is wrong with my computer? Network discover, file sharing all checked, network location was changed from Public to Private today by me. But it did work last year, even with the network location being public.
I'm finding Windows 10 enjoyable and pleasant for the most part.
Unfortunately, some things that are easy to find or to do (probably due to years of experience) in Windows 7 and 8/8.1 are not easy to find, assuming they exist at all, in Windows 10 build 10130. For instance, I've looked high and low for "Change PC Settings" and it is like the proverbial needle in the haystack.
My present problem is that I can't see other computers in my network/workgroup. They are visible to my Windows 7 and 8.1 computers. My network is set to private in Windows 10. Find devices is set to on.
I note that I can ping all my devices, Squeezeboxes, WDMycloud hard disk, chromecast, computers etc., and the squeezeboxes, Logitech Media Server , WDMYcloud and Chromecast are showing up as devices.
I updated my sys to windows 10 one month ago. I had a smooth experience on network accessing but now my system internal apps are not connecting to internet(like windows store, Maps, sports, Food & drink etc). But I can able to browse using browsers(browsers are connecting to internet).
Connection - Wired Connection Not limited.
I checked DNS settings too but no solution.
We have a new (albeit old) wireless printer (HP Color laserjet CP3525) with a wireless adapter card. Computers running Windows 7 or Windows 8 could see the network and connect. All computers could then print to the printer. None of our computers running Windows 8.1 could see the network. I upgraded one computer to Windows 10. It can now see the printer network but cannot connect.
View 7 RepliesI recently got this problem. I restored, restore said it didn't complete, but problem is solved. However I have been having repeated connection issues. Not sure if it could be a hard drive failure imminent problem, or due to the forced update/installs Win10 makes me do.
View 2 RepliesI was unable to connect to an older (backup) AP in Win10, but Win7 and my phone, tablet etc could connect no problem - these were connecting using WPA-TKIP, but MS now only allows WPA2-AES
So MS have removed the less secure WPA-TKIP protocol from W10 (this apparently started in W8), but they have left the even less secure WEP protocol in place!!!
I have now connected using WEP - on my router you can use a passphrase to create the hex pairs for the key, but you need to enter the actual hex characters as the key (eg 13 hex digit pairs = 26 characters to enter)
Looking at the wlan profile from the command line interface shows what the settings are...
netsh wlan>show profile plusnet2
Profile PlusNet2 on interface Wireless Network Connection 4:
====================================
Applied: All User Profile
Profile information
-------------------
Version : 1
Type : Wireless LAN
Name : PlusNet2
Control options :
Connection mode : Connect automatically
[Code]......
I have an issue on both my Windows 10 laptop and desktop PC. Both are DELL and new. Suddenly, my PC wouldn't connect to the internet using ANY wifi network. For this reason, I eliminated my WiFi modem - because the same issue happened when using my phone tethering. Using the Ethernet cable worked. Then a few weeks later my laptop has the same issue, but with this I can't plug in an ethernet port, because it dosen't have one. Both computers had IP Vanish VPN (probably nothing to do with it but thought I'd mention). I believe these issues happened after updates.
I've tried disabling firewall, antivirus, uninstalling Vanish VPN, using cmd from things I've seen recommended, updated network adapter on desktop.
I can reach them by the quick access shortcuts I added before the upgrade but they don't show up in WE Network.
Rebooting my WD MyCloud solves the problem until next time I reboot my Win10 c.
suddenly none of my computers can log onto my homegroup. They all say one is available, but when I put password in it just keeps running as if it is looking but can't proceed. I am not able to change homegroup either.
View 3 RepliesI have 3 computers on the network. All have shared folders . My problem is as follows.
Lets call the computers c2, c3, c4. I am using network shares
When on computer c4 , computers c2 and c3 are not listed at all under network. Sometimes I do see c3 listed but cannot access it.
In computers c2 and c3 , all computers are listed and I can view all the shared folders in c2 , c3 including those on C4.
I cant understand why c4 have such problems viewing other computers on the network. I have rebooted router ( E4200) and computers but still have same problem .
All shared folders are properly shared. and no passwords are required for networks in adv sharing .
remotely shutting down pc from another desktop, shutting down other computer is "access is Denied"
View 5 RepliesI have two Windows 10 Pro x64 machines - say, A and B - connected into a home network. Both machines have two interactive user accounts registered on them: Admin (member of Administrators) and Bob (member of Users). On both machines user names are exactly the same and account passwords are exactly the same.I don't use HomeGroup file sharing, all sharing is set up using accounts and passwords. Everything works fine with folder sharing.
Now I would like to share a printer. The printer is connected to machine A. I enable sharing for that device and give it share name HP. I also go to the printer security settings and enable everything for Administrators and Users.Now I go to machine B. First, I log in as Admin. I go to Devices and Printers in Control Panel and perform the regular procedure of adding a network printer. At some point I have to enter the name of the printer, so I enter AHP. Without asking for any credentials Windows successfully connects to the remote printer, installs drivers, prints the test page etc. The remote printer appears in Devices and Printers. Everything works as it should.
Then I log out from Admin and log in as Bob on the very same machine B. The first thing that I notice is that for Bob the new printer does not exist in Devices and Printers. This is probably OK, since access to shared network resources depends on per-user credentials.
So, I attempt to "install" this printer for Bob as well. I repeat the same procedure from scratch. this time as Bob: go to Devices and Printers in Control Panel and perform the regular procedure of adding a network printer. Again, at some point I have to enter the name of the printer, so I enter AHP. However, Windows suddenly asks me for credentials to connect to the printer. If I enter Bob's user name and password, Windows refuses connect to the printer, claiming that Bob does not have permission to access it. End of story.
Note that I can work around this problem: I can enter Admin's user name and password when installing the printer for Bob and ask Windows to remember these credentials. Everything will work fine after that, which means that Bob will access that printer as Admin.I don't want to give Bob credentials of Admin to access the network printer. I want Bob to access that printer under Bob's credentials. It works perfectly fine for file sharing. How come it doesn't work for printer sharing?
I'm having an issue with my browser not connecting to my internet. I have no issues connecting to my email, Skype or steam. I just can't connect to webpages like Google. I have recently updated to windows 10 (from windows 7) but for the first day and a half everything was working fine. I have already tried uninstalling and reinstalling my network drivers and updating them for windows 10. I have tried restarting my router and PC 100 times. I have run multiple virus scans using Malwarebytes v.2.2.0.1024 with no show of infection. I have also tried using the commands to reset my TCPIP and Winsock in cmd (admin). My WiFi on my phone, tablet and laptop work fine.
I do want to mention that the second I updated my network driver for windows 10 all the webpages I had open loaded. But if I tried to open a new webpage it would not load. The message I get says "This webpage is not available. ERR_NAME_NOT_RESOLVED" and I sometimes get "This webpage is not available. DNS_PROBE_FINISHED_NXDOMAIN" on Google chrome. I get "Server not found" on Mozilla Firefox and Microsoft Edge doesn't even give me a message, just a blank page. Is there anything else that I can try?
I've decided to go back to Windows 7 and that has fixed the problem.
Anyways, I want to allow connection to only one WiFi, which is my WiFi. How do I do this?
This is to prevent users from connecting to their Hotspots and stealing my data.
I have a desktop and a laptop setup at home, I have recently upgraded both to Windows 10. Both were previously running Windows 7 Home Premium and could identify each other on the network and I could access files on either PC from one or the other at any time.With the upgrade to Windows 10 I am still able to see the other machine on the local network, but I am unable to access their folders and move files between machines. The error message I get is as follows.When I run the network diagnosis no errors are detected and it asks me if I want to explore other options.
The full error message is:I do have shared libraries available across both machines that are part of my homegroup, so I can access the video files in the hard drive of my desktop from my Laptop but only to play them - not to move them around.I suspect this is either a user validation issue, or a firewall issue and I'm not sure how to go about checking whether this is the case or not.
I recently upgraded the 3 machines on my home network to windows 10 home.
Currently when I open up "this PC" and click on network, only one of the 3 computers shows up, and this machine is not the local machine on 2 of them. However If I type in the UNC address for the other machines I can access them.
If I set up a home group all the computers show up in the home group roll out under "this PC" but still not in the network.
Something else that is strange. If I look at "network and sharing center" two of the the computer see one private network name and the other one sees a different name.
I have two desktops and a NAS drive on my network. Both PC's are Win10. One Pro, the other Home. Everything was working beautifully then out of nowhere the Home machine just stopped accessing the public folder on the Pro machine saying it didn't have permission. I thought the Public folder didn't need permissions if it's shared with Everybody. But it will access and read the other non-public shares on the Pro machine. Weird The Pro machine, however, doesn't even see the Home machine on the network any more, although I can ping it. Again, weird. I had a mapped drive to the Home machine which is now broken. Both PC's can see and access the NAS drive. No settings were changed, nothing was touched, it just worked one minute and stopped the next. The Pro machine was just updated to Build 10586.3 on 11/13/15. But I don't think that caused it because everything worked until the 17th. All the network settings were correct and they have not been changed. I can't find anything about it on the internet except the typical "Make sure Network Discovery is on and file sharing is enabled." Yes, Network Discovery is on and file and printer sharing is enabled on both machines. Still no go.
View 9 RepliesOur home network has a desktop and 3 laptops. The 3 laptops all print through the network to the printer attached to the desktop.
For some reason only 1 of the laptops now shows in the desktop network folder. The other 2 have vanished and cannot see the desktop either so no printing. I have tried running both Homegroups and using names & passwords but no difference. I also have a server on the network and that has vanished.
I have checked the credentials and all passwords and names are correct.
I have removed Avast anti-virus and have Windows firewall set to default settings running with Defender.
Windows 10 is the latest version 1511 on all the PCs.
i have been suffering slow WiFi speeds for a while now and sky have replaced my router.
I have two computers both running windows 10 with the latest build
Now since i started with this router i have lost my home network and i have not changed anything on the computer
Some times i can see my other computer but not able to connect to it. sometimes i can see nothing. sometimes i can see the sky router and sometimes not.
My network is set to private on both computers and file and printing is turned on.
All i have done is plugged in a new router.
Sometimes i can see on my network a device called AirTies WAP what is this.
After doing a google search i found that AirTies WAP is something to do with my Sky wireless booster. is that right.
I am not able to see the other computer it says error 0x80070035
OK, so I have this one Windows 10 computer.
When trying to access a Windows 8 computer under "Network", it prompts me for a user/pass.
All other computers (Windows 7/8) can see the public folders of each other no problem; even the public folders of this one Windows 10 computer!
