Networking :: Event Log Filled With WPNConnectionFailure
Nov 1, 2015
Having some internet issues where connection is lost for 3-4 minutes and the cable modem restarts. The event viewer is filled with the logs below usually before the internet disconnects. I'm wondering if this is the cable modem's fault and Windows just reporting what's happening, or if the computer itself is causing the cable modem to restart.
Code:
Fault bucket , type 0Event Name: WPNConnectionFailureResponse: Not available
Cab Id: 0Problem signature:P1: Data Fast-Reconnect
P2: 8004acb1P3: WNPP4: UnknownP5: UnknownP6: UnknownP7: 1P8: 242P9: P10:
This error started happening only on computers with 1511 installed. The original RTM of Windows 10 doesn't do this, nor do Windows 7, 8 and 8.1. I tried some Google searches but all I see are relevant to 7 or 8, not Windows 10. It must have been something changed between RTM and 1511 that did it, too.
When I refurbish computers for our employees, I wipe the hard drive completely (either diskpart "clean" via the recovery shell, or using DBAN to wipe the partition table if I can't get into WinRE.
I then boot it up using network boot. We have a Windows Deployment Services server set up so we can install Windows using PXE. I put the Windows 10 Enterprise Version 1511 .wim in there and it installs fine.
After install I make a local account, make sure the drivers get installed automatically (so far, it's been auto-magic for all our hardware, even NVIDIA and AMD graphics cards), install antivirus + MS Office and whatever special software that employee would need, and then I name the machine and put it on the domain.
To prevent extra crap from being created in C:/Users (and in the registry) I don't log in with a domain account. I let the employees do that themselves.
The first time any domain account* tries to log in, it errors after about 20 seconds with
Code:
Windows couldn't connect to the System Event Notification Service service.Please consult your system administrator. If they put their password in again, it goes through and all the initial settings are applied from our Group Policy Objects.
*I noticed that if I log in as an account which is a Domain Administrator (and via our GPOs, is also added to the Administrators group on the machine), I don't get that error. It only shows up for "normal" users which are not part of admins.
Nothing critical by any means as it will always work on the second try, but I'm really curious why it happens at all. What service is it even trying to connect to? The fact it happens on literally every computer (it even happens in VMWare images which I've done to test GPO settings) would imply it's not a problem with a particular machine, rather something in our domain. Or it's possible there's a GPO that was set years ago for Windows 7 that didn't cause any detrimental effects until now.
I had upgraded to win 10 about two months ago. for the last two days my c drive is getting filled up automatically. It is in excess of 90 gb and yet yesterday It was full. I tried to use online support and checked on dosv files etc but to no avail. I then decompressed all files using the option under properties on right clicking the c drive and got 25 gb free this morning. I am watching uselessly as it has already reduced to 19 gb and is reducing fast with no activity and no internet down load etc from my side.
I had upgraded to win 10 about two months ago. for the last two days my c drive is getting filled up automatically. It is in excess of 90 gb and yet yesterday It was full. I tried to check on dosv files etc but to no avail. I then decompressed all files using the option under properties on right clicking the c drive and got 25 gb free this morning. I am watching uselessly as it has already reduced to 19 gb and is reducing fast with no activity and no internet down load etc from my side.
I am running Windows 10 Home 64-bit. I have an Intel HD Graphics card and a NVIDIA GeForce GT 735M. I have had an issue for a couple of months when viewing videos or footage from my built-in camera. Half of the screen appears fine, but the other half is filled with horizontal blurring bars. This happens with a lot of videos, but some appear okay. The attached image is an example from today on YouTube.
The only constant errors I get when I reboot are these four, that all share the same ID of 7031.
The Contact Data_Session2 service terminated unexpectedly. It has done this 1 time(s). The following corrective action will be taken in 10000 milliseconds: Restart the service.
The Sync Host_Session2 service terminated unexpectedly. It has done this 1 time(s). The following corrective action will be taken in 10000 milliseconds: Restart the service.
The User Data Access_Session2 service terminated unexpectedly. It has done this 1 time(s). The following corrective action will be taken in 10000 milliseconds: Restart the service.
The User Data Storage_Session2 service terminated unexpectedly. It has done this 1 time(s). The following corrective action will be taken in 10000 milliseconds: Restart the service.
Is there anyway to fix these, or better just leaving them be?
How to track services via eventlog name in cmd.so the main problem is I can't seem to find these services on services.msc ... I want to know how to track these services via cmd, how I don't want you guys to tell me what type of service is this i want too know how I can track this own my own?
I open calendar and click on the "+ New Event" button on the top left and... nothing happens. In fact, I can't do anything other than move the view around. What on earth am I doing wrong?
I've had Windows 10 since August, and for the most part, things have been going relatively okay. My only real glaring problem with the OS is that I can no longer here a sound during a system event. By that I mean the usual sounds like when you're clicking through the Explorer, emptying the recycle bin, a dialog pop-up and such.
My system is a Dell Inspiron N4100 that was previously running Win7 Home Premium, and now I'm running Win10 Home Edition. The sound in general works fine; like media players, games, and through the Internet browsers. It's only the system sounds that refuse to play.
It seems that whenever the Windows Store became available I've always gotten Event ID's 69 similar to the one below. The app changes. It usually happens about 15 minutes I first cold boot my machine. Sometimes after installing a Store app.
Failed with 0x490 modifying AppModel Runtime status for package Microsoft.WindowsCalculator_10.1511.60020.0_x64__8wekyb3d8bbwe for user DESKTOP-JJKSIHMgarys (current status = 0x0, desired status = 0x20).
It has occurred on Windows 8.x and Windows 10. On different machines too. Even with a clean install. It never seems to affect the application mentioned. I assume it's part of the Store updating procedure.
What exactly this error means? Seems to be another permissions problem which Windows has always had since 8.x.
I need to get the attached application to run. it has suddenly stopped interacting with windows. attached is the screenshot. the application is kernel.exe.
For the past few weeks I've been seeing errors in the Event Viewer relating to the LockScreen. These only happen when waking the PC up from Sleep mode. The errors are:-
5973 Activation of application Microsoft.LockApp_cw5n1h2txyewy!WindowsDefaultLockScreen failed with error: The app didn't start in the required time. See the Microsoft-Windows-TWinUI/Operational log for additional information.
and
1002 The program LockApp.exe version 0.0.0.0 stopped interacting with Windows and was closed. To see if more information about the problem is available, check the problem history in the Security and Maintenance control panel.
I had my win 10 installed for about 2 weeks , but there's some problem about randomly freeze at some interval , so i checked event viewer and got event id 153 which is say about "The IO operation at logical block address 0x204d96b8 for Disk 0 (PDO name: DeviceIdeIAAStorageDevice-1) was retried" what it is ?coz I dont really know about I/O operation at windows .
My calendar app opens fine. I did the setup with adding accounts and I can view the calendar perfectly in any way I want (by month, day, etc.). As far as I can tell, everything is working except for the New Event button.
This is what it looks like:
The New Event button looks highlighted, even though my mouse is nowhere near that window. When I do mouse over it, nothing happens. If I mouse over the numbers on the calendar below it, they do get highlighted, but the New Event button does not. It's as though there's nothing there at all.
A calendar's useless to me if I can't put events on it. If I wanted to just see the chart, I'd just click the time on the taskbar.
Or perhaps if there is an app in the Windows Store (for free) that functions like this one should? I tried to find one, but they were all "view-only" calendars.
make the "Clear All Event Viewer Logs using a BAT file" self starting such as making it run automatically on a daily basis or show me what code I would need to add to it to do that for me. I would just love to clear out the 10016s and 7031s codes daily.
Task Scheduler service found a misconfiguration in the NT TASKMicrosoftWindowsMedia CenterRegisterSearch definition. Additional Data: Error Value: %SystemRoot%ehomeehPrivJob.exe.
This is the event error after attempting to do a regular 'FIND' within the Registry. Before the Fall upgrade installed via .iso on 11/20/2015 this Find worked.
The Nirsoft Registry Scan will scan and find. I did not attempt to link to the registry from that Nirsoft tool
The last software installed was a Nirsoft My Event Viewer as a portable app 11/21/15.It had errors via ntoskrnl.exe when executed. Microsoft apps were updated automatically 11/21/15(Photos, Messaging)
These are the only changes since the fall upgrade Win10-1511
I recently re-installed W10, and used Kari's tutorial to move the Users folder to a partition on another disk, using the sysprep routine.
This is a list of W10s Environment variables that apply to my account (MS/user/admin):
Those that relate to my account all seem to be pointing to the right location (H:Users).
However, until I turned off 'Sync my settings', the event viewer was littered with errors regarding ESENT--Extensible Storage (database) Engine, recorded multiple times per minute in an infinitely repetitive sequence: Events 494, 454, 488 & 413. The 494 event is the trigger:
SettingSyncHost (2876) {068B89D8-0F81-40D5-A335-0959E66CAECB}: Database recovery failed with error -1216 because it encountered references to a database, 'C:UsersomnesAppDataLocalMicrosoftWindowsSettingSyncmetastoremeta.edb', which is no longer present. The database was not brought to a Clean Shutdown state before it was removed (or possibly moved or renamed). The database engine will not permit recovery to complete for this instance until the missing database is re-instated. If the database is truly no longer available and no longer required, procedures for recovering from this error are available in the Microsoft Knowledge Base or by following the "more information" link at the bottom of this message.
Any way of directing the SettingSyncHost process to the right location? The drive/partition label (C:) should be H:, but otherwise the path is correct, and the db file (which is a hidden, system file) exists in that location.
It's not a problem for at present, as I don't have any devices that use that account, and have turned off 'Sync my settings' via Account settings; but it may be in the future, and may also be an issue for those who have moved the Users folder and have devices that give them that syncing feeling.
Incidentally, virtually all references in the MKB describe permissions rather than location problems, and the "more information" link in Event Viewer (Event Log Online Support) provides no information (Page Not Found).
When I create a New Event on a specific day (All Day Event), it shows up on the previous day. For instance, a new event entered as an all day event on Sunday the 24th will appear on Saturday the 23rd.
I'm getting the following event viewer error every 15-30 minutes whenever a non-admin account is logged in.The application-specific permission settings do not grant Local Activation permission for the COM Server application with CLSID
{D63B10C5-BB46-4990-A94F-E40B9D520160} and APPID {9CA88EE3-ACB7-47C8-AFC4-AB702511C276} to the user XXYY SID (S-1-5-21-1462133472-353174448-3584519177-1002) from address LocalHost (Using LRPC) running in the application container Unavailable SID (Unavailable). This security permission can be modified using the Component Services administrative tool.
I've tracked the AppID down to RuntimeBroker. I've found a few posts mentioning a similar error for this application under windows 8, and suggesting changing the security settings as described. When I try to do this though, all the settings for RuntimeBroker are disabled, and cannot be customised. I've tried launch the admin tool as administrator, but it's still locked down.
Just upgraded my Win 8.1 Pro 64-bit to Win 10, and Event Viewer shows literally hundreds of Errors and Warnings. My 8.1 was almost error-free. What gives? Can I re-do the upgrade and try again?
Whenever I run a System Diagnostics Report for Windows 10, there is always a warning like this:"Investigate why 13% (5,128) events were lost during data collection. The settings for Event Tracing for Windows (ETW) maximum buffers and buffer size may not be optimal depending on which data sets are being collected."
I have had a bunch of unexpected shutdowns as of late, all of them of the event 6008. And with shutdown I basically mean, the same effect as pulling the plug, no BSOD or anything, and after that the PC reboots.
