As the title says I am unable to "see" my NAS in windows explorer. I was able to use explorer to view/add/delete files on my NAS a few weeks ago but now now cannot even see the NAS in the network section.
Funny thing is that I am able to ping the server and even login to the GUI via IE and firefox. But i can't get the media files.
I am currently running the evaluation copy of Windows 10: Details:
- Windows 10 Pro Insider Preview
- version 1511
- OS build 10565.41737
- 64Bit
- Intel i&-2600 CPU with 24GB of RAM
I have tried the follow to correct the issue with no success:
- Rebooted windows 10 machine (several times)
- Rebooted Router (Actiontec V2000H)
- Rebooted NAS (FreeNAS 9.3)
- ipconfig /flushdns
- change from using PIN to password
- Change from password to PIN
- using regedit added the AllowInsecureGuestAuth = 1 to the registry.
Notes on NAS:
using Freenas 9.3, ZFS volume, enabled CIFS shares. do not require login to access media files (or any files). The server only has media files on it so no password required or enabled.
Notes on Network:
- The network is hardwired with Cat 5e cable (except for wireless printer)
- Windows 10 explorer is able to "see" other windows machines (windows 7 and 8), an Linus Ubuntu 14.04 machine, router (Actiontec V2000H, printer (wireless), AV receiver,
- the windows 7/8 machines are able to access the media files on the NAS with no issues and are able to see the windows 10 machine.
- the ubuntu 14.04 machine is able to access the media files on the NAS with no issues and is able to see the windows 10//8/7 machines on the network.
I like windows 10 but it will be a show stopper if I cannot access my NAS from this Windows 10 machine.
As the title says I am unable to "see" my NAS in windows explorer. I was able to use explorer to view/add/delete files on my NAS a few weeks ago but now now cannot even see the NAS in the network section. Funny thing is that I am able to ping the server and even login to the GUI via IE and firefox. But i can't get the media files.
I am currently running the evaluation copy of Windows 10: Details: - Windows 10 Pro Insider Preview - version 1511 - OS build 10565.41737 - 64Bit - Intel i&-2600 CPU with 24GB of RAM
I have tried the follow to correct the issue with no success: - Rebooted windows 10 machine (several times) - Rebooted Router (Actiontec V2000H) - Rebooted NAS (FreeNAS 9.3) - ipconfig /flushdns - change from using PIN to password - Change from password to PIN - using regedit added the AllowInsecureGuestAuth = 1 to the registry.
Notes on NAS: using Freenas 9.3, ZFS volume, enabled CIFS shares. do not require login to access media files (or any files). The server only has media files on it so no password required or enabled.
Notes on Network: - The network is hardwired with Cat 5e cable (except for wireless printer) - Windows 10 explorer is able to "see" other windows machines (windows 7 and 8), an Linus Ubuntu 14.04 machine, router (Actiontec V2000H, printer (wireless), AV receiver, - the windows 7/8 machines are able to access the media files on the NAS with no issues and are able to see the windows 10 machine. - the ubuntu 14.04 machine is able to access the media files on the NAS with no issues and is able to see the windows 10//8/7 machines on the network.
I like windows 10 but it will be a show stopper if I cannot access my NAS from this Windows 10 machine.
Under the Network tab of File Explorer, I can see three entries, one of which is my router (with attached Hard Drive) and two computers, each running Windows 10. When I expand the router entry, I can see my hard drive files. I can also see my Users icons when I expand one of the computer's tabs. However, when I click on the other computer's name to search for users, all I see is a message that "This folder is empty". In fact, the folder is not empty, as there are two users on the computer. How I can get this computer to show users, etc.?
I have been having issues with my WD MyCloud NAS not showing up under Network on the left navigation pane of File Explorer. I am able to access the NAS by entering the host name (WDMYCLOUD) in the address bar in File Explorer. I was able to find a solution that fixes this and makes my NAS appear in Network as expected. The solution involved running Command Prompt as Admin, executing some commands, then restarting the computer.
What I would like to do is automate this process by creating a batch file that will:
Open Command Prompt as AdminAutomatically enter specific commandsClose Command PromptRestart the computer
New to windows 10, I have 2 accounts both in family.When I log into my account and open File explorer, I can see all the programs copied across from my previous PC, e.g. music, pictures etc., however, when my wife logs into her account, and opens file explorer the folders are all empty. How do we share common files on a single PC using file explorer and not a network or OneDrive?
I'm on a Windows 10 Pro PC accessing a linux server with samba etc installed and working well (visible via Homegroup to both Android and Windows 7 pro). From the Win 10 box, if I type the name of the server in Windows File Explorer, then the shares from the server show up without issue. However, if I go into the Network folder, it does not see the linux servers - even though they are correctly configured for the correct homegroup. My windows 7 machines can see the servers in "network" as can my android devices.
Here's a screenshot. Note, the red arrows show what displays in Network folder (red arrows). If I click on the Server Name (HunterNAS in this case), the server shares are displayed and it shows up in the Network folder (blue arrows). Even after making the successful connection, display of another file explorer window > Network folder displays no linux server shares...
I am using a Lumia 520.I am trying to connect my phone via Bluetooth but the laptop can't discover my phone and hence not able to connect. Windows 10...
Using Win10 Pro x64. I would like to disable windows showing .zip files in explorer as a folder...When you highlight it the contents inside the .zip are shown in the right pane view. I've scoured the net and found ways for Win7(which I did disable .zip folders on my other Win7 machine) and Vista, perhaps 8 too but I don't want to risk trying a method for older versions of windows. Any solution/reg hack or whatever to disable .zip folder?
I just installed Windows 10. Not sure if I like it, but I'm trying hard.
Problem: When I go to File Explorer, in the left panel, when I click on a folder name, the contents of that folder (both sub-folders and files) show in the right panel.
In the left panel, when I click on ">" beside a folder name, it will expand in the left panel showing the sub-folders, but not "loose files".
I could have sworn that in earlier versions of Windows the files also showed.
Is there a option setting somewhere to change this behavior and to show the files also in the left panel?
I can set an alias in the hosts file on a win7 machine and access it just fine but doing the same in Win10 prompts for creds that never work even when entered correctly. What did win10 change?
hosts file entry: 127.0.0.1 hostname alias
ip - works fine hostname -works fine alias - Prompts for creds and creds don't work
I have gone to the extent of fully disabling UAC from reg, same outcome. Network and file sharing is set to password access and not homegroup. Simple file sharing is off.
Something to note. I always disable ipv6 form the adapter but when I ping my hostname it shows the ipv6 loopback. Why is that? When I ping the alias it returns 127.0.0.1 ipv4 loopback that was entered in the hostname.
In Windows 7 when I open Windows Explorer it comes up with a very simple window that has very basic tabs, Organise, Share With Burn, New Folder. Organise then has a very basic drop down menu.
When I use File Explorer in Windows 10 it comes up with a much more detailed menu that offers four menus, File, Home, Share, View.
Is there any way I can use a window similar to Windows 7? I'm sure it is there somewhere as when you attempt to open a file in an application a window identical to what I want comes up to allow the selection.
On my Surface Book I've noticed it seems to take about 1.5seconds from pressing the file explorer button to it opening whilst this isn't slow my Surface Pro 2 opens instantly just wondering why on a brand new machine its slower than a 3 year old lower spec model?
After upgrading from Windows 8.1 to Windows 10, my file explorer simply keeps crashing when navigating in folders.
Example: I go to "This PC" and the window that pops up show all my drives but not how much storage they have/have left. When I try open a drive or folder the window and taskbar closes down and reopen after a few seconds. I haven't had this problem even a single time before I upgraded to Windows 10 but now it happens almost every time I try open a folder.
This is the second time I have posted about the same problem. I can't move file explorer to the task bar. I tried to move it by right clicking on start, then left click on file explorer the menu I get that way just says "pin to start" and more, when I click on more all that is there is don't show with this list, if I left click the start button and then left click file explorer the menu only says "pin to start". I am at a loss, I have had one problem after another with Windows 10 and considering going back to Windows 7. I have tried to revert back to windows 7 from windows 10 but that failed, the only other option I have is to format the hard drive and reload Windows 7. I understand by doing that I will get the Windows 10 10 upgrade icon in the right hand corner of the task bar. How do I get rid of that?
I've had windows 10 since November and just today it's been playing up. None of the apps open - they display a message "element not found" for explorer exe or for other things like chrome, ms word you click on it and nothing happens. Can't even turn off the computer (start > turn off just does nothing) I've tried pressing the power button on my PC but that just seems to put it into sleep mode and not properly restart it.
When in file explorer, I sometimes want to print out the list of names of the folders and files for reference or to bump against another list of names of folders and files. The "share" option lists 'printer' but does not work properly. It only wants to print photos.
Wanted to put Desktop into Quick accessInstead of that I managed to move somehow This PC, Network, C: and D: drives, and the rest under Desktop. So, when all collapsed, only Quick access and Desktop remain.Consequently, all links and hierarchy is wrong, can't open Outlook, some other folders, not even Start Menu can't be accessed.No permission despite I'm the Admin.
Is there a way to DISABLE in file explorer this stupid thing from showing me Quick Access, Libraries ETC .. I want the thing to open at the root directory of my drive ONLY and every time.
Secondly - is there a way to disable the auto locating (not sure what to call it) feature in file explorer - .. when I navigate to a location - I WANT IT TO STAY THERE .. not jump around again like it thinks it knows what I want - IT DOESNT
I can not see anything in File Explorer. I use to be able to see my drives and so forth. Also any of my personnel folders and files. look funny. some are just blank icons now.
File Explorer sometimes displays a full dropdown menu and then displays just a slender list of right-arrows. Also, when I delete or rename a file or folder, I have to refresh the screen by getting out and getting back in.
Certain applications behave strangely or give error messages. Adobe Photoshop Elements takes a long time to load and then sometimes aborts when I try to save a file. When I run Adobe Photoshop CC 2015 I get error messages (which make no sense to me).
I should add, though it may have nothing to do with anything that I recently installed PC Matic. After some problems which they could not resolve (because all of their "solutions" were for earlier Windows versions) I uninstalled the software.
