I finally got a PSU for my fileserver, and got it tested. It world perfect, but! I got a little problem, me and my stepdad is gonna use this server (it's mine) and I want both of us to access it from all our pc's and write to it. I didn't get it working when I had my NUC as a temp server. And I really want it do work now. So me and my stepdad can write data to it over the network.
View 2 Replies
My Windows 10 seems to share some files and i cannot figure out how to disable files sharing.
I have 0 files in my Media player library, also, i have no other dlna sw installed that shares anything.
How to remove these files from shared list?
I just realized that all the shared files are .mov files. Are the .mov files automatically shared somehow?
How do I connect to a shared network drive I have setup on my Windows 2012 R2 standard server at home, from my Windows 10 pro laptop is at work?
Do I have to setup a vpn on windows 2012 server and connect to it from my laptop?
On my desktop (AKA S4, currently running Win8.1 x64 pro) I have shared out four of the hard drives with full permissions. I have 5 PCs in my network and all can access the four drives. My sister is visiting and currently accessing my network via cat5 wire. On her PC (running Win 10 x64 pro) if I view the network in Windows Explorer I can see my desktop (S4). When I double-click on S4 I'm prompted to enter network credentials. "Enter your credentials to connect to: S4" I entered my logon S4 ID and password but it tells me that the user name or password is incorrect. What the heck should I be entering? All computers are part of the same work group (WORKGROUP) and all computers are wired connected. All computers can access the internet.
View 9 RepliesI have two laptops, both sitting next to the WiFi but from some reason I cannot see any shared device on laptop 1.
And on laptop 2, I can see all the devices with shared files in them. I can even access the shared files in laptop 1, but I cannot see the shared files on laptop 2.
I just installed Windows 10 on both of them, same method, same software, same laptops that is same model.
I have a usb connected hard drive connected to my Bell 2000 router. The instructions to access this drive is to go to the Documents folder and enter mynetwork. This then shows the shared hard drive as mynetworkNETWORKHD. If I now click on NETWORKHD I get the following:
mynetworkNWTWORKHD is not accessible. You might not have permission to use this network resource. Contac the administrator of this server to find out if you have access permissions.
Not enough storage is available to process this command. This all worked for me under Windows 7. I am unsure if it ever worked under Windows 10.
If I plug a 2 gb thumb drive into the other port on my Bell 2000 rounter it works without any problem.
From one of my Windows 10 machines I am unable to access the shared folders on the other. The troubleshooter says "One or more network protocols are missing on this computer" and "Windows Sockets registry entries required for network connectivity are missing."
I have run sfc /scannow, but no problems were found. I don't get the problem when sharing in the other direction or when accessing the shared folders on the same machine.
This comes amidst a cluster of sharing-related problems. Before the reboot after which the present problem manifested itself, shares going in the other direction were invisible in the network browser (but could be accessed via the search bar). Also, the machine in question does not appear in the HomeGroup browser even though it is a member of the HomeGroup.
There must be a way around ...?? Assume I understand the risks.
View 3 RepliesI disabled UAC & i'm using the only account on this system, which is admin. Yet i'm not allowed to write to C roots and being ask to write in many other places.. How do i disable that & i'm having admin rights ALL THE TIME while using my admin account..?Ok so what i mostly need is the ability (permanently) to write to C: disk root. How do i do that?
View 9 RepliesI am running a multiboot W7-pro and W10-pro with several harddisks build in the computer to discover that after W10 used a disk W7 wants to check it to find no errors. Beside that I am not allowed to delete some folders I created in W7 after using them in W10 and they are set to free for use for everybody.
W7 now askes me to get permission from that everybody. I think they mean the W10-everybody. Understand that security is important nowadays but this is becoming a disaster! Also discovered that running the backupapplication Cobian (that always did a perfect job in W7) now is not allowd to acces lots of files in W7 anymore after W10 did ?????something??????.
Another example: I have two SATA backup 1 Tb Disks I switch every few weeks. W10 refused to see the new one after the first switch. Had to go deep into settings to carefully trying to open its content again as W10 told me zero bytes were used. In the end the 900 Gb data was there again but I have forgotten all the steps needed to fix it.
My best guess is that beside Microsoft is messing around with accounts and rights to get full control of your computer. They do not want you to be in control yourself anymore and you have to (must) only use W10 in the future. I am starting to feel a big fool that upgraded to W10 as I am loosing control over my PC's and home-network day by day!!!!
I m have activated my windows 7 on laptop using same shared key used for my business computers. If I will upgrade my laptop to windows 10, will it affect other computers which are using same key.
View 2 RepliesAbove message received on trying to put a shortcut on desktop. My disk has many GB of space. Have run Malwarebytes on PC and no virus detected.
View 6 RepliesI upgraded my laptop and desktop to Windows 10. Everything OK after re-setting up Homegroup, including file and printer sharing. However, shared printers on desktop suddenly have become invisible to laptop, although shared files are still visible. I deleted the homegroup and set up a new one - same problem, shared printer invisible from laptop, shared files visible.
View 1 RepliesI cannot add a printer that is connected to a PC with Windows 10 installed. Client OS is Windows XP.
When I try to open "WIN10COMP" and doubleclick on printer name, I get: "Operation could not be completed. Access is denied.".
When I try to add this printer using master, after entering credentials I get: "The credentials supplied are not sufficient to access this printer. Do you want to specify new credentials?".
I can browse a shared by Windows 10 folder, create, edit and delete files in that folder, though.
How can I add that printer?
I have a 2 desktops and a laptop all running Windows 10 Home.
I have a Homegroup that is working and I can see and access the shared folders on each machine.
I can see and connect to the printer on Desktop 2 from the laptop but not Desktop 1's printer. That printer is on and working properly on Desktop 1.
This previously worked fine. I think it stopped working when I updated to the new Windows 10 update yesterday on the laptop and Desktop 1. Desktop 2 has not yet been updated.
I have rebooted both computers and ran the Homegroup Troubleshooter which could not find any problems.
I have two Windows 10 Pro x64 machines - say, A and B - connected into a home network. Both machines have two interactive user accounts registered on them: Admin (member of Administrators) and Bob (member of Users). On both machines user names are exactly the same and account passwords are exactly the same.I don't use HomeGroup file sharing, all sharing is set up using accounts and passwords. Everything works fine with folder sharing.
Now I would like to share a printer. The printer is connected to machine A. I enable sharing for that device and give it share name HP. I also go to the printer security settings and enable everything for Administrators and Users.Now I go to machine B. First, I log in as Admin. I go to Devices and Printers in Control Panel and perform the regular procedure of adding a network printer. At some point I have to enter the name of the printer, so I enter AHP. Without asking for any credentials Windows successfully connects to the remote printer, installs drivers, prints the test page etc. The remote printer appears in Devices and Printers. Everything works as it should.
Then I log out from Admin and log in as Bob on the very same machine B. The first thing that I notice is that for Bob the new printer does not exist in Devices and Printers. This is probably OK, since access to shared network resources depends on per-user credentials.
So, I attempt to "install" this printer for Bob as well. I repeat the same procedure from scratch. this time as Bob: go to Devices and Printers in Control Panel and perform the regular procedure of adding a network printer. Again, at some point I have to enter the name of the printer, so I enter AHP. However, Windows suddenly asks me for credentials to connect to the printer. If I enter Bob's user name and password, Windows refuses connect to the printer, claiming that Bob does not have permission to access it. End of story.
Note that I can work around this problem: I can enter Admin's user name and password when installing the printer for Bob and ask Windows to remember these credentials. Everything will work fine after that, which means that Bob will access that printer as Admin.I don't want to give Bob credentials of Admin to access the network printer. I want Bob to access that printer under Bob's credentials. It works perfectly fine for file sharing. How come it doesn't work for printer sharing?
Clean W10pro installation from scratch. No upgrade. Quad Core intel @ 3.??ghz with 4GB on an intel board. Basic workhorse machine. Windows is up to date and nothing else has been installed to the machine. No changes to OS from defaults upon installation. Device Manager shows all attached devices are working properly. USB Wireless card connects to the access point just fine.
ICS is enabled on this adapter and shows as "shared". Ethernet adapter is auto-configured by ICS (IP and SUBNET). This adapter displays as "Unidentified Network" with or without cable connected. Under Status/Details: NO gateway. NO DNS servers.
Client Computer: same basic machine as above. Everything updated and functional.Ethernet adapter wired with standard ethernet cable to Host. (All this gear is modern and will not require hardline crossover)Ethernet adapter is set to obtain IP/DNS automatically.Under Status/Detail IP Address is 192.168.137.124 (DNS is working properly)Ping 192.168.137.1 successful without errors.
I disabled the firewalls. No improvement. Reset everything to defaults. Tried a "Bridged Connection" same "No Internet Access" results. In the end everything works except no internet access across the two adapters in the Host machine and there should be.
My question is in regards to shared folders. I run a desktop and laptop connected by ethernet, through a router. Both machines run Windows 10 Pro. Both machines have static IP addresses setup in the router. I do not use a software firewall and both computers are allowed onto the network.
I share folders on both machines in order to run client software on the laptop which connects to the flight simulator on the desktop. All of the shared folders have full control setup for everyone in both security settings and the shared folders tab.
There are HomeGroups set up on both machines with the correct information.
The problem (finally you say) is that occasionally, one computer cannot open the shared folders on the other over the network. This doesn't happen all the time, nor is the solution consistent. Sometimes closing and reopening the network folder fixes it. Sometimes just waiting does it. Other times, I have to reboot the computer(s). This creates issues with my client software trying to connect to the desktop. The error is: 0x80070035 Windows cannot find.....(to paraphrase).
I should point out that the other machine shows up in the network folder. I just can't access it when this happens. This happens mainly on the laptop attempting to connect to the desktop, although once in awhile the desktop cannot find the laptop.
I have checked and rechecked settings, deleted and rebult the HomeGroup, ensured password protected sharing is off, network discovery is on; amongst other things. I read about changing the shared computer name to its IP address. I also read somewhere about changing a number of registry entries that would force a change in Windows network behaviour.
I am running Windows 10 and trying to set up a network so that I can transfer photos from an android phone onto my laptop hard drive for back up. I've been using an app to do this and it has worked in the past brilliantly (called "Sweet Home" if interested). Unfortunately since upgrading to Windows 10 and changing my phone it doesn't work. I have also been trying to test the network using ES File Explorer. I have tried setting this up on another laptop running Windows 8 and it works no problem, so the issue must be with my settings.
I have set up a home group, made sure everything is shared where it should be and permissions set so that the network should be visible to everyone, but the android device can't see the network at all. For reference when setting up the network I followed the step by step in the link below on the Windows 8 laptop and it worked.
[URL] ..
One strange point that I think might be related on the Windows 10 laptop, is when I get to Step 2 (of the link above) under "How to enable sharing on Windows?" the "Share" button is greyed out, even when the folder is not shared. I have to share it by clicking the "Advanced Sharing" button instead.
OK, so I have this one Windows 10 computer.
When trying to access a Windows 8 computer under "Network", it prompts me for a user/pass.
All other computers (Windows 7/8) can see the public folders of each other no problem; even the public folders of this one Windows 10 computer!
Settings > Network & Internet > Manage Wi-Fi Settings
Here on Microsoft Support page, there's a tutorial on how to "turn off Connect to suggested open hotspots and Connect to networks shared by my contacts"
Configure telemetry and other settings in your organization (Windows)
I used the exact code mentioned there:
REM Disable Wifi Sense
REG ADD "HKLMSOFTWAREMicrosoftWcmSvcwifinetworkmanagerconfig" /V "AutoConnectAllowedOEM" /T REG_DWORD /D "0" /F
But the above code only turn off "Connect to suggested open hotspots" and not "Connect to networks shared by my contacts". How can I turn off "Connect to networks shared by my contacts" via registry?
We have a peer to peer network, with one Win 10 machine (acting as server - which we call server) which shares several hard drives for everyone in the office to access. It has network discovery on, file and printer sharing on, turn off password protected sharing off. It has all the drives named and shared properly so everyone has full access. All the other Win 7, and Win 8 machines have complete access as designed.
Another Win 10 machine has complete access as designed. All machines are part of the same workgroup Engineer. My machine is a Lenovo laptop which was upgraded from Win 8 to Win 10. When I try to access the Win 10 machine (which is acting as server), I get the Enter Network credentials pop-up asking for Username and Password which we do not use nor have ever set up on the Win 10 machine or any other. I know that there are several posts that have the Enter Network credentials popping up, but the difference is that their screenshot showed them as part of a workgroup.
See the following:
When I get the same pop-up on my Lenovo Laptop It looks like the following ....
My System Properties information ....
Notice that the example above which is part of the workgroup has no reference to a domain. My pop-up on the Laptop shows reference to a domain, and whats interesting is that the domain is the computer name of the laptop itself. There are no domains set up on any machine of our peer to peer network.
I have two machines running Windows 10 "ermintrude and dougal" and I want my home folder on each to be shared with the other on my home network. dougal can see my home folder on ermintrude, but not the other way round. I have been through all the advanced sharing settings on each machine and compared them, and I have done the same for the sharing settings for each home folder, but I cannot find any difference between them. They are identical. Each is set to share as owner using the same Hotmail address as login and the same password. As I said, I cannot find anything different between the two configurations.
View 3 RepliesSo I bit the bullet and "upgraded" my laptop from Windows 7 to 10. I expected to find a few things that didn't work anymore, but not so soon as this. I keep it in sync with my desktop PC (running XP) by net-sharing its hard drive, with permission for full control granted to its "administrators" group. I mount it on my desktop PC, where I have the same username and password for my primary administrator account. When it ran Windows 7 this all worked well, but now whenever I try to list or open its files I get "Access is denied."
Interestingly, I still can access the hard drive on my desktop PC while sitting at my laptop. It is only the vice-versa that fails, accessing the hard drive on my laptop PC while sitting at my desktop.
On my laptop, Windows Firewall is "off" for private networks, and it considers my home network to be "private."
How do I find my network DVR in Network and sharing center?
View 4 RepliesI have a peculiar issue with wifi on Windows 10. My computer shows a wifi link speed of 270 Mbps and i have tested the same by sending huge files over my network. Now the issue is that i strongly believe that something in Windows 10 is throttling the internet speeds drastically. I am only getting half of the subscribed download speeds on my Windows 10. I have other devices/phones connected to the same wireless network and they are getting full speeds!
I have tried several things but i am unable to achieve full download speeds on my Windows 10. This has been affecting me for the past around 15 days. Prior to that things used to be normal.
