Networking :: Host Network Working In Only Safe Mode
Nov 19, 2015
My windows 2003 server stopped working in normal mode, but working in "safe mode with networking" and giving reply from all peers, and reaching all remote locations. in Normal mode not even ping to peer and giving error "destination host unreachable". tried with new NIC. IP conflict coming when assigning used IP address, if giving a new IP address not even request going to peer showing the same error as "destination host un reachble".
View 1 Replies
Similar Messages:
Aug 24, 2015
Most of the time we need to boot in safe mode with Networking to fix some of the issues. In some of the windows 10 computers wireless not working in safe mode with Networking
For an example my dell 5547. Has a wireless card, Intel Ac-3160 works fine in normal mode, But in safe mode it refuses to detect any Network, I am seeing similar behavior in some other models too in windows 10
Wired Networking (ethernet) is working.
View 9 Replies
Sep 2, 2015
I've been getting the following error : "The group or resource is not in the correct state to perform the requested operation" Things I've already done trying to solve the problem:
1) Clean install of Windows 10.
2) Made sure my WiFi network card doesn't go to Sleep, by disabling that option in the Power Management.
3) Have set hosted network mode to allow
4) Made sure that my network with internet access is set to sharing
Additional info: It was working fine untill some random windows update, after which the PC started getting BSOD when trying to host a network. Reinstalling drivers started giving me this error instead of BSOD. Then I rolled back to windows 8.1 and checked again. It was working flawlessly. I assumed it to be a driver problem, so I upgraded to Windows 10 again and this error is back.
View 7 Replies
Nov 1, 2015
Through msconfig I added safe boot with networking, however when I restart with F8 networking does not boot up. Took a while to even find how to get that far and then it didn't work right.
View 3 Replies
Sep 3, 2015
I've never seen this problem with the previous O.S., Windows 7, but Windows 10 is throwing me this error message approximately 70% of the time when I run the network troubleshooter...either from the Control Panel, or by right clicking on the task bar's connection icon.
Though Win10 is the first O.S. to give me this error, the Microsoft support forums indicate that it's been fairly annoying to Windows 7 users back to 2010. Also, Microsoft support employees just give vague general tips for trying to nail down the cause.
I'm only experiencing this in EDGE. Edge sometimes freezes on a webpage when I'm attempting to post a message to a forum, similar to what I'm doing now. I run the Network Troubleshooter and get the "Native Host Has Stopped..." error. I open a new Edge tab, come to this forum and try to do a search for the answer, but this forum's search function ignores my input. So, I opened IE-11, navigate to Win10 forum, and all works well.
Experienced the "Scripted Diagnostic Native Host has Stopped Working" error when running the network troubleshooter?
View 2 Replies
Jan 31, 2016
Okay so here's what happened. I had made a new user on win10 and gave it admin rights. I then booted my pc in safemode to fix an unrelated problem and when I went to log into the account, the password I had given it did not work. I do not have a windows 10 disk to reset my password as I upgraded internally from 8 to 10. all I need to do is get out of safe mode.
View 3 Replies
Aug 18, 2015
For some reason the Airplane mode setting can not be turned off in Network and Internet Settings, Network setting from taskbar, or Action center from taskbar. I am using my desktop and will never have it on an airplane. However, the computer does have a wifi adapter which I could use and it is able to be enabled.
Also, have other wifi devices on my home network, another PC and a tablet, a wireless printer and all are working fine. It must be a 'bug' on the desktop but someone should know that it is there. On the other PC, which is an all in one, the Airplane mode is not even in the settings anywhere.
View 4 Replies
May 5, 2015
I decided to take the plunge and install win 10 on one of my machines. Used windows update to install build 10074 from windows 7.
Everything seems to have worked fine except my network adapter (onboard Realtek thing) isn't being detected.
Figured this might be a driver thing so I installed various versions of the realtek drivers both win 7 and win 8 ones and these seem to install fine but then cannot detect the card. The installer gives an error that the card may be in "Deep Sleep mode".
Once installed the Device "REaltek PCIe GBE Family Controller" appears in device manager with no issues or conflicts, but nothing is in the Network Connections window when I go through Network and Sharing centre.
I have tried booting to the trouble shooting menu and selecting load unsigned drivers but this has not worked.
I rolled back to Win 7 and the card came back and all connectivity was restored. Re-installed win10 and back to the same issue.
View 9 Replies
Feb 10, 2016
I am facing a problem that my PC running Windows 10 cant see other PC's/Devices on my network.
Idk. if it have something to do with i cant make/join a homegroup.
I was told to remove a file in "C:WindowsServiceProfilesLocalServiceAppDataRoamingPeerNetworking" but the file was not there.
View 1 Replies
Oct 5, 2015
i have a killer e2400 network adaptor over a wired connection on my msi motherboard. Unfortunately, out of the blue it has stopped working. I constantly get the error message "Ethernet doesn't have a valid IP configuration." I have tried a number of things such as stopping and restarting the services in computer management. Nothing appears to work. I know my router works as I'm using it now on another computer.
View 2 Replies
Aug 12, 2015
I know this problem has been discussed with many variants but not quite the same as I'm experiencing, so I'm starting a new thread.
I did a clean install of Windows 10 pro 64 bit, and everything was running perfectly, that is until two days ago when the computers on the network simply disappeared. I had done nothing with changes or new software or anything of that sort.
I checked network discovery and it was on, but the only computer showing was the home computer. I have tried turning discovery off then rebooting and then back on again and rebooting. In all cases the network drives are accessible. I have manually entered the computer name in the address bar of File Explorer eg "//COMPUTER2" and then I can go and enter the other computers manually. Everything will stay there until I close down File Explorer and then they disappear again only shown the home computer.
View 9 Replies
Nov 16, 2015
I just installed (yesterday) the latest W10 update that installed Version 1511 (OS Build 10586.3) and my home network consisting of five W10 PC's has been "destroyed." I do not use Homegroup. Instead, I have always set up all the drives/folders as shared on all the computers. That worked just fine until now! For some reason only one of the PC's is detected by the other PC's on the network. However, all the drives that I had previously Mapped are OK. Is there some new magic setting that I have to change to get network discovery working again ...or... is MSFT forcing me to use Homegroup?
A little more information to add to my confusion. I was wrong above - two of the PC's are shown in the Network on all the PC's. One of the five PC's, which I use as a home server, runs 24-7. For some reason it has all the other PC's showing under Network and can access all the stuff on all the PC's!! I know it used to take Windows a few minutes to find all the PC's on the Network but... all the other PC's have been running for many hours and nothing changes.
View 9 Replies
Dec 29, 2015
I recently set up a Homegroup on a Win10 laptop so I can see another PC on the network. That PC is running Win8.1, and I would like to use it for file backup. The devices are visible on both ends of the network and have connectivity, but when I choose to use the File Backup function from the laptop, nothing transfers and eventually I have to restart because of no response from the system. Also, my browser will stop working. I have added the PC as a network location and specified the location for backup, but is has locked up twice now. Could this be a routing issue? I previously ran the auto backup feature to a memory card, but need more space.
View 2 Replies
Feb 3, 2016
I have changed my router. Is a 'FritzBox fon WLAN 7170'. First i connected, it was all good, i tried to connect to browser and it was good. Then i tried to connect Steam. "Could not connect to the steam network, either check your connection and click 'Retry' or start Steam in offline mode."I looked up for the probem, tried to:
- start the shortcut with -tcp
- turn the firewall off
- remove Steam from processes
- uninstall Steam and install it again.
- delete all files from Steam (without steamapps folder)
I tried other games online, they don't work either..I saw that video - Fritz!Box Firewall Port forwarding - YouTube (is 3:22 minutes long, if you want to watch it)I saw on the internet i can connect to the router settings with WIFI connection and i can't connect (CMD - ipconfig - Default Gateway in the browser).
Do i need to port forwoard all of them ?Is the Dynamic DNS the case?Why is the IPV6 with "No network access"? -Is the IPV6 important for online games?Do i need to set IPV6 ON?
View 5 Replies
Oct 20, 2015
I upgraded to windows 10 from 8.1, ever since then, my Huawei 173 stopped working. The led light flashes, yet the network signal is not showing, the display hangs and several other issue.
View 1 Replies
Feb 2, 2016
Product Name: Hp Omen 15
Operating System: Microsoft Windows 10 (64-bit)
Wifi card: Intel Wireless-N 7260
since some days my wifi has stopped working.If I click on Wifi icon it shows only ONE (max two) NETWORK:And I live in a building with 20+ networks, as you can see from WiFi Analyzer (I'm the red one on the right).If I deactive/reactive Wifi with fn+f12, it goes to Airplane mode and to Wifi mode again and it eventually shows all the networks/My Wifi is on the top. If it's saved, Windows connects to it and then it drops the connection; if it's not saved and I try to connect, it says "You're not able to connect to this network".The fun fact is that after some seconds every network disappear and only one is showed (probably the neighbour one..I dunno).
I've already tried to HARD-RESET the notebook keeping the power button for 10/15sec with the laptop turned off.I've already tried to follow these instructions [URL] ... updating drivers (Intel 18.12.0.3, 18.12.1.2, 18.30.0.9 [Windows 10 default], 18.32.0 [Lastest drivers]) with no success. Everytime I install a new drivers, I uninstalled the previous one + Wireless software + reboot.
I tried to uncheked "Allow this computer to turn off this device to save power" on my Wifi hardware settings without success.The HP Network support says I didn't choose a Wifi (Really? The problem is I don't see my Wifi on the list!).This is not related to a new Windows 10 upgrade since I've installed it months ago and It's the first time I've this problem :/ It always worked
I tried different settings too/I changed channel, I set 802.11g on my router, APSD off on the router.I set "Magic packet off, ad hoc QoS off, U-APSD off, fat channel off,incremental throughput off, HT mode off" on the card setting without success. Nothing chaned.The Hardware test doesn't detect any failure. If I go close to the router, it shows my network with full power connection and it connects to it. Then I go back to my bedroom (probably 3/4 meters far), it KEEPS the connection for 30/40min and It drops the connection and I can't reconnect to it anymore. It always worked perfectly in my room in these months (I bought it in March 2015), so the distance is not a problem, I'm 6/7m far from the router.In this case It shows my Network (Connected) and the neighbour network...and the other 20+ networks???
The only way I have is USB tethering with my Nexus 5.I tried the Wifi connection on Elementary Freya (Ubuntu linux based OS) and it shows 20+ networks available on the list. It has not connection problem with my Wifi, but sometimes it stops working, the webpages stop loading and I must reboot Wifi to reconnect to it (usually after 30/40min using it).What's the problem? Is my Wifi card broken?
View 1 Replies
Sep 5, 2015
It gets thru part of the set up and I'm getting an error box that says Modern Setup Host has stopped working. I give up. I was hoping a repair would keep my app and docs, but I guess that option is not working. At some point I will do a clean install, if I can, I just don't have the patience to reinstall all my apps and stuff.
View 2 Replies
Aug 20, 2015
Due to there not being an F8 boot command screen any more I had to go into msconfig to change how the computer starts up.. which is now set to safe mode. So I'm in safe mode (on the other computer).. the problem is I cannot figure out how to reset it to start up in normal mode. The 'search windows' box at the bottom will not allow any text to be entered.. unless I can get to msconfig by looking for it in safe mode.. I'm stuck in safe mode. How to get to msconfig in safe mode without typing it in? again the msconfig was changed to have the computer start up in safe mode.. it's now doing it every time.. even after a system restore to 4 days ago.
View 2 Replies
Aug 25, 2015
I put my PC in safe mode but when I try to get out I can't I press the windows key and the R and then put msconfig. A window opens but it closes right after.
View 6 Replies
Aug 2, 2015
I have a MSI board and cant seem to find how to run windows 10 in safe mode
View 1 Replies
Dec 1, 2015
I knew better but with the constant nagging for me to update...I accepted the update. This is where the problems started. My HP dv7 took the update and now only shows a sun burst and blue like screen...mouse works but will not do anything else...tried to boot in safe mode but nothing doing there either...... how to just get back to my win 7 home pre.
View 2 Replies
Aug 24, 2015
I was having difficulty with flashing and went into safe mode to try to figure out which program was causing it but now whenever I reboot I am still in Safe Mode.
View 8 Replies
Sep 5, 2015
how it did not work on windows 10 using f8 key..I like knowing if I need to get into safe mode on my pc the f8 key will work... So I started checking the web and found how to make windows 10 go into safe mode with f8 key...The information I found is for windows 8 but I checked it out on my windows 10 pc and it works just fine... How to enable the F8 key to start Safe Mode in Windows 8.Admin...If this is information you all know about just delete this post...
View 6 Replies
Dec 15, 2015
I'm using Windows 8.1 and know how to get into safe mode on that operating system.
However, my friend has Windows 10 Home Edition and I've never had exposure to it in the past.
How does one get into Safe Mode?
Also, how can you get the toolbar back on the page as like Windows 7 and Windows 8.1?
In Windows 8.1 it was very simple and straight forward, but Windows 10, different ball game all together.
View 9 Replies
Jan 28, 2016
Needed to boot in safe mode, used msconfig to set the boot mode. Of course I was not aware my pen number login is wothless so now I am stuck in perpetual safe login screen. My outlook password is in a program on the system which I cannot access.
Tried shift restart and tried startup settings and press enter, but this does not do a normal boot, just another safe mode. Where is the option for normal boot!?
View 9 Replies
Feb 23, 2016
I work in an education environment and these kids are very savvy. They have figured out how to put the computer in Safe Mode and make it impossible for me to track them. how to Disable Safe Mode?
View 5 Replies
