How do I connect to a shared network drive I have setup on my Windows 2012 R2 standard server at home, from my Windows 10 pro laptop is at work?
Do I have to setup a vpn on windows 2012 server and connect to it from my laptop?
On my desktop (AKA S4, currently running Win8.1 x64 pro) I have shared out four of the hard drives with full permissions. I have 5 PCs in my network and all can access the four drives. My sister is visiting and currently accessing my network via cat5 wire. On her PC (running Win 10 x64 pro) if I view the network in Windows Explorer I can see my desktop (S4). When I double-click on S4 I'm prompted to enter network credentials. "Enter your credentials to connect to: S4" I entered my logon S4 ID and password but it tells me that the user name or password is incorrect. What the heck should I be entering? All computers are part of the same work group (WORKGROUP) and all computers are wired connected. All computers can access the internet.
View 9 RepliesI have a usb connected hard drive connected to my Bell 2000 router. The instructions to access this drive is to go to the Documents folder and enter mynetwork. This then shows the shared hard drive as mynetworkNETWORKHD. If I now click on NETWORKHD I get the following:
mynetworkNWTWORKHD is not accessible. You might not have permission to use this network resource. Contac the administrator of this server to find out if you have access permissions.
Not enough storage is available to process this command. This all worked for me under Windows 7. I am unsure if it ever worked under Windows 10.
If I plug a 2 gb thumb drive into the other port on my Bell 2000 rounter it works without any problem.
I have a 2 desktops and a laptop all running Windows 10 Home.
I have a Homegroup that is working and I can see and access the shared folders on each machine.
I can see and connect to the printer on Desktop 2 from the laptop but not Desktop 1's printer. That printer is on and working properly on Desktop 1.
This previously worked fine. I think it stopped working when I updated to the new Windows 10 update yesterday on the laptop and Desktop 1. Desktop 2 has not yet been updated.
I have rebooted both computers and ran the Homegroup Troubleshooter which could not find any problems.
Settings > Network & Internet > Manage Wi-Fi Settings
Here on Microsoft Support page, there's a tutorial on how to "turn off Connect to suggested open hotspots and Connect to networks shared by my contacts"
Configure telemetry and other settings in your organization (Windows)
I used the exact code mentioned there:
REM Disable Wifi Sense
REG ADD "HKLMSOFTWAREMicrosoftWcmSvcwifinetworkmanagerconfig" /V "AutoConnectAllowedOEM" /T REG_DWORD /D "0" /F
But the above code only turn off "Connect to suggested open hotspots" and not "Connect to networks shared by my contacts". How can I turn off "Connect to networks shared by my contacts" via registry?
My Windows 10 seems to share some files and i cannot figure out how to disable files sharing.
I have 0 files in my Media player library, also, i have no other dlna sw installed that shares anything.
How to remove these files from shared list?
I just realized that all the shared files are .mov files. Are the .mov files automatically shared somehow?
I have two laptops, both sitting next to the WiFi but from some reason I cannot see any shared device on laptop 1.
And on laptop 2, I can see all the devices with shared files in them. I can even access the shared files in laptop 1, but I cannot see the shared files on laptop 2.
I just installed Windows 10 on both of them, same method, same software, same laptops that is same model.
I finally got a PSU for my fileserver, and got it tested. It world perfect, but! I got a little problem, me and my stepdad is gonna use this server (it's mine) and I want both of us to access it from all our pc's and write to it. I didn't get it working when I had my NUC as a temp server. And I really want it do work now. So me and my stepdad can write data to it over the network.
View 2 RepliesFrom one of my Windows 10 machines I am unable to access the shared folders on the other. The troubleshooter says "One or more network protocols are missing on this computer" and "Windows Sockets registry entries required for network connectivity are missing."
I have run sfc /scannow, but no problems were found. I don't get the problem when sharing in the other direction or when accessing the shared folders on the same machine.
This comes amidst a cluster of sharing-related problems. Before the reboot after which the present problem manifested itself, shares going in the other direction were invisible in the network browser (but could be accessed via the search bar). Also, the machine in question does not appear in the HomeGroup browser even though it is a member of the HomeGroup.
Today, while having lunch at my favorite restaurant, I tried to connect to their WiFi network as I usually do. I got the following message:Checking network resources.And then, after a few seconds: Can't connect to this network. My obvious question is, why not? To begin with, was it something wrong with my computer, or something wrong with their network?
For example:
DHCP server did not respond
DHCP server did not issue an IP addressStored password incorrect; enter new password: _________
WiFi adapter card not respondingInsufficient virtual memory
But no, none of that useful information was offered. How am I supposed to fix the problem?
I started my PC in a new premises with a Wireless modem, I have two other PC's connected.
When I started the PC it saw the wireless network and the option came up to connect and there was a tick in the "Connect Automatically" box.
I selected OK but got a message "unable to connect".
I did not get the opportunity to enter the Password/Key.
Now the PC will not connect to the Network nor will and Diagnose and repair fix anything.
BTW the Ethernet adaptor has been disabled.
The laptop I am sending this from is next to the PC so the wireless signal is okay.
I have a Windows 10 Pro 64bit box as my NAS
Storage Spaces, ReFS, 2 drives mirrored
HomeGroup
HDD sleep on idle
Hibernate/Sleep disabled
My problem is when I typically save or open a file with the Windows file dialog on any Windows 10 machine, and I try to go to that machine through the network path //MyNAS/MyFiles, it initially gives me a cannot connect or find error.Is this due to the dialog not waking up the drives on the NAS? Something is obviously asleep here, and I usually end up opening Total Commander or Windows Explorer to "wake up" the connection and then everything works. I don't mind waiting, but I'd like the dialogs to hold tight until it connects, not give me not found or cannot connect.
it was working back on 10049 and then i updated to 10051 and it still was working fine. but recently i did a fresh install and now i can re add a network device
i have a "New" Nintendo 3ds and i cant setup the MicroSD management which requires you to add it as a network drive
like N3DS
in the network tab i can see it but when i click it it says
windows cannot access N3DS
error code 0x80070035
the network path was not found
upon clicking troubleshooting the problem says
the remote device or resource wont accept the connection..
I have 2 new PC's set up and running, connected to a NAS via a Switch. Internet is available via a router.
I need to be able to access folders on and from both machines. I have shared C: on both, given permissions on both (everyone = Full control)
I can see the relevant machines in the network section of Windows Explorer (master & backoffice). Sometimes I can see C: on the other machine but I can not connect to it. If I Double click I get "path not found" error ( 80070035 I think )..... masterc
If I type in using the IPaddress it connects and works fine.... 192.168.1.69c
It seems that once I've used the IPaddress method, it can sometimes use the name method ( But this is hit and miss )
I have just bought a new windows 10 machine. It finds my home WIFI but fails to connect with the message "Can't connect to this network".
I have tried all the obvious issues such as re-booting (every component). I have several windows 7 machines and have checked the configuration of the wireless adaptors and there is nothing different around security, or 802 protocol selected etc. I have tuned off IP version 6 after reading some forums but get the same error.
My router is provided is provided by SKY is:
Manufacturer Sagemcom
Model Number F@ST2304
Firmware Version 7.16a4N
ADSL Firmware Version A2pD038m.d24h
Whenever I try to connect I get the following router system log:
Nov 7 15:09:11 (none) user.alert kernel: Intrusion -> IN=pppoa0 OUT= MAC= SRC=136.159.181.168 DST=2.125.174.9 LEN=60 TOS=0x00 PREC=0x00 TTL=50 ID=40139 DF PROTO=TCP SPT=45482 DPT=23 WINDOW=5840 RES=0x00 SYN URGP=0 MARK=0x8000000
My first experience with Windows 10 has been extremely frustrating and wasted a lot of time. I see that this is also a very common problem. Equally frustrating is the lack of diagnostic from Windows...I appear to have no way of knowing why the connection failed (hence why I have shown the router log).
My aunt did the free Windows 10 update from Windows 7. After the update she had no internet connection so she decided to roll back to Windows 7. After the roll back, she still has no connection. Her connection icon says "unidentified network" and will not connect to the internet. It is plugged directly into the modem.
View 5 Repliesyou could connect to an hidden wifi network? or it's just my laptop?
View 9 RepliesI'm running WiFi on my desktop since a couple of months but tonight(since 2 days ago) I suddenly "can't connect to this network". I live in an apartment building for students and we share a Wi-Fi connection in the house. I've asked my neighbor and her connection works.
My smartphone can connect to the network as usual, my chromecast can connect but not my PC.
I run win 10 and use an ASUS PCE-AC68 network card.
ATM I'm connected to my smartphone hotspot so it seems like there's nothing physically wrong with my equipment.
Smartphone connected to the wifi network
Full signal can't connect!?
Desktop can't connect
I think I've tried all the obvious stuff. Checking for new drivers for my ASUS card, firewall is completely off, telling Win 10 to forget the connection and rebooting, waiting... I just get that annoying message "can't connect to this network" "close"...
Here is a wireless network report(netsh wlan show wlanreport) ....
I recently upgraded one of my laptops from Win7 Pro to Win10 Pro. Ever since then it has been taking a much longer time for the laptop to connect to either of my home networks (two different homes). This is with either WiFi or Ethernet.
When it was running Win7 it would connect to either home's network in a few seconds. Now it usually takes over a minute, as much as two minutes. Once it does connect everything works fine.
Product Name: Hp Omen 15
Operating System: Microsoft Windows 10 (64-bit)
Wifi card: Intel Wireless-N 7260
since some days my wifi has stopped working.If I click on Wifi icon it shows only ONE (max two) NETWORK:And I live in a building with 20+ networks, as you can see from WiFi Analyzer (I'm the red one on the right).If I deactive/reactive Wifi with fn+f12, it goes to Airplane mode and to Wifi mode again and it eventually shows all the networks/My Wifi is on the top. If it's saved, Windows connects to it and then it drops the connection; if it's not saved and I try to connect, it says "You're not able to connect to this network".The fun fact is that after some seconds every network disappear and only one is showed (probably the neighbour one..I dunno).
I've already tried to HARD-RESET the notebook keeping the power button for 10/15sec with the laptop turned off.I've already tried to follow these instructions [URL] ... updating drivers (Intel 18.12.0.3, 18.12.1.2, 18.30.0.9 [Windows 10 default], 18.32.0 [Lastest drivers]) with no success. Everytime I install a new drivers, I uninstalled the previous one + Wireless software + reboot.
I tried to uncheked "Allow this computer to turn off this device to save power" on my Wifi hardware settings without success.The HP Network support says I didn't choose a Wifi (Really? The problem is I don't see my Wifi on the list!).This is not related to a new Windows 10 upgrade since I've installed it months ago and It's the first time I've this problem :/ It always worked
I tried different settings too/I changed channel, I set 802.11g on my router, APSD off on the router.I set "Magic packet off, ad hoc QoS off, U-APSD off, fat channel off,incremental throughput off, HT mode off" on the card setting without success. Nothing chaned.The Hardware test doesn't detect any failure. If I go close to the router, it shows my network with full power connection and it connects to it. Then I go back to my bedroom (probably 3/4 meters far), it KEEPS the connection for 30/40min and It drops the connection and I can't reconnect to it anymore. It always worked perfectly in my room in these months (I bought it in March 2015), so the distance is not a problem, I'm 6/7m far from the router.In this case It shows my Network (Connected) and the neighbour network...and the other 20+ networks???
The only way I have is USB tethering with my Nexus 5.I tried the Wifi connection on Elementary Freya (Ubuntu linux based OS) and it shows 20+ networks available on the list. It has not connection problem with my Wifi, but sometimes it stops working, the webpages stop loading and I must reboot Wifi to reconnect to it (usually after 30/40min using it).What's the problem? Is my Wifi card broken?
I am trying to set up our server which we have on my sisters new laptop. when I go to 'map network drive' and click 'browse' the server called 'BGE-B-NAS' doesn't appear on the list. I have tried multiple times and nothing seems to be working. I also tried to type it in manually but it just said that 'windows cannot access BGE-B-NASCompanydata'. Is it to do with the fact that this is a laptop and it is using the wifi instead of being wired?
View 1 Repliesmy Windows 10 Enterprise PC cannot access to my company's network storage at 10.63.0.250. In the previous edition like windows 7 or 8, I can access easily by enter 10.63.0.250 in the Address box in File Explorer or in Run windows (Window button + R). However, I have got trouble since I upgraded to Window 10. The notification is "The network path was not found", although I can ping to this and another PC can access the network storage in File Explorer.
View 8 RepliesToday i did a fresh install of win 10 Home today on my laptop but i'm unable to see my NAS Drive in my network. I can put the nas address into the address bar in my Network and i can access it but i don't like to do it that way. I also use Kodi media center and now my nas is not showing in my network i can't add media content.
View 9 Repliesi was create map network drive in windows 10 now i need remove but idont now how removed it
View 4 RepliesI have 2 machines connected via a switch. They both have shared folders. They both run a piece of software. One machine acts as a master the other connects to it for data.
The issue is that the "Server" service is randomly stopping on the master and none of the shares work. The software on the second machine is crashing because it can't see the shares on the master. Windows explorer can't see the shares either.
Once this service has been started the software works fine. I have set the service recovery to restart on all failures but this hasn't resolved the issue. Why this stops or how to rectify the problem?
I recently set up a Homegroup on a Win10 laptop so I can see another PC on the network. That PC is running Win8.1, and I would like to use it for file backup. The devices are visible on both ends of the network and have connectivity, but when I choose to use the File Backup function from the laptop, nothing transfers and eventually I have to restart because of no response from the system. Also, my browser will stop working. I have added the PC as a network location and specified the location for backup, but is has locked up twice now. Could this be a routing issue? I previously ran the auto backup feature to a memory card, but need more space.
View 2 Replies