Networking :: How To Get PC To Support Miracast
Jan 9, 2016
So I just got a new LG smart TV that has a screen share mode. I wanted to use it but apparently my PC doesn't support miracast.
How do I get miracast support? I'm sure all my drivers are up to date, but i'll check again. Here's my dxdiag, I couldn't get much info from it. I'm not sure why it's not supported, and I don't have much knowledge on the issue.
I can get the TV to show up in Devices under settings, but I can't project to it. Does my second monitor have anything to do with it?
View 9 Replies
Similar Messages:
Jan 24, 2016
All of a sudden I get "your device does not support Miracast" and wifi is gone !
I don't want Miracast.
Acer Laptop;was win 7 on it had upgraded to W 10 Pro and was using wifi until now ?
View 2 Replies
Nov 18, 2015
I know that you can use Linux to connect to Internet via bluetooth on your Android phone, and it runs smoothly, more less, but Windows seems to be far more problematic when it comes to this. Is there such a possibility? And if so, how?
View 4 Replies
Oct 21, 2015
I recently bought a TP LINK TF-3200 card because my Lan port got fried :P. But, it id getting detected but is not working as I am not able to find new drivers for it.
View 8 Replies
Dec 13, 2015
I am trying to start a hosted network on my Windows 10 system, but every time I got something like "The group or resource is not in the correct state." I then ran "netsh wlan show driver" and see that it is using a Realtek RTL8723BS driver which says it does not support hosted network. I also don't see any "Microsoft hosted network virtual driver" in my Device Manager, even if I turn on the showing of hidden devices. Does that mean there is no way I can get a hosted network to run on this device? Is there some way I can get the driver to support hosted network? (I already updated to the latest version of the driver and rebooted, and that did not work).
View 9 Replies
Aug 22, 2015
After updating to Windows 10 on my SP1, I noticed that wireless displays now have a max resolution of 1280x720 60Hz. In 8.1, I used to have access to 1920x1080 30hz. Didn't experience this on a different laptop, though.
Using a Netgear PTV3000 with the latest firmware (so far).
View 1 Replies
Sep 1, 2015
Windows 7 and 8 I don't believe had native support for .flv video files, does windows 10 and if not what is the best way to achieve this?
View 9 Replies
Dec 29, 2015
This feature was not supported in WP8.1 so the question is have they finally added it in WP10?
View 1 Replies
Sep 6, 2015
I have recently upgraded to Windows 10 on an eight year old laptop which previously was running Windows 7. Everything appears to have gone well and I am enjoying the new operating system. However, every time I boot up and get to the desktop a small box appears on the screen with the following wording "Warning. The program don't support the project" with an OK button and an X close button. Clicking on either of these closes the box and I simply carry on as normal. What concerns me is the bad grammar "don't support" and I am concerned it might be some sort of malware.
I attach a screenshot.
View 9 Replies
Jul 8, 2015
As the windows 10 launch date is ahead, has guys at MS added the option for adding apps to wishlist yet?
View 13 Replies
Aug 16, 2015
i would want to know if i should upgrade to win 10 since only drivers that support win 10 are amds 15.7 drivers and i dont plan on upgrading my monitor.
View 1 Replies
Aug 12, 2015
Just converted my systems to Windows 10. Working well, so far. I would like to install 4TB disks on a couple of the systems and understand that I need to use UEFI. Looks like my ASUS P8Z68-U GEN 3 MB supports UEFI, but I don't understand how to enable it. The other system has ASUS B85M-E mother board. I've seen some one paragraph descriptions, but they don't really walk me through the process.
1 - Can I upgrade my existing system without a complete Windows 10 reinstall? I have lots of apps installed so I'd like to avoid complete system rebuilds.
2 - Due to legacy use of Mirrored drives, I'm using the Intel RAID stuff, although I no longer need it. Will that be a problem? SSD and other disks are JBOD. I'd like to get rid of that, but I think that does require a complete system reinstall since disabling the RAID wipes the disk.
Looking for step by step process to convert a system to UEFI to support 4TB disks?
View 6 Replies
Dec 27, 2015
Have a Dell Inspiron 2200, was running Xp, loaded Windows Starter, run ok, tried to upgrade to Windows 10. Got error message "PC's Processor doesn't support a critical feature (NX)".
View 9 Replies
Aug 13, 2015
I am getting a message from Norton that Windows Edge Browser doesn't support add ons and therefore I am not protected while surfing the net. It is asking me to switch back to Explorer or Chrome.
View 1 Replies
Dec 29, 2015
I have never needed the ability to lock a few apps before and now I need it. I have looked at a few applications in windows phone 8.1 and they only lock the app from the start screen and we can still access the apps from the apps list?
View 1 Replies
Sep 25, 2015
When I try to use google phone I get the message this browser does not support Hangouts after upgraded to Windows 10?
View 1 Replies
Aug 22, 2015
I'm trying to install Windows 10 clean install on my laptop via USB. I've gotten to the point where I'm configuring the hard drive and I got the message in the title "Windows cannot be installed to this disk"
I then deleted the existing hard drive and had roughly a TB of unallocated space. Created a new partition and formatted only to get the same message.
Background: Purchased an HP Elitebook 8460p a month ago running Win7 Pro. Can't quite remember how it was running when I first started it up. I upgraded to 10 a little over a week ago using window's upgrade. Immediately I felt it was running really slowly. I have 10 on a desktop which runs really smoothly. I checked and found that the laptop was consistently running at 100% disk usage. I looked up and tried various different fixes to the 100% disk usage problem including removing BITS and superfetch.
I felt that maybe there was a problem with Win 10 on the laptop so I used the native revert to 7 program in windows 10. I found that even in 7, the computer was running terribly slow. I decided to just do a clean install of 10 and here is where I am now.
Specs:
Intel Core i5
8GB DDR3 SDRAM
1TB HDD
I've read other threads here and elsewhere regarding the SATA device mode changing from IDE to AHCI. I just checked and it is already set at AHCI.
View 1 Replies
Nov 20, 2015
A while back I successfully upgraded my Windows 7 to Windows 10, and then reverted back to Windows 7, with no problems. Today, I created a new partition and attempted to do a clean install of Windows 10, using a flash drive. Install failed, with the message "This PC's processor doesn't support a critical feature (NX)." Has the Windows 10 installation changed in the meantime? What's the problem? I checked the BIOS, and could find no mention of NX.
View 7 Replies
Oct 13, 2015
I'm using Amd radeon graphics, windows 10, of course, but the problem is that i unleashed my change-settings-see-what-happends power and i changed my graphic cards resolution a little too high... And now i only get the error screen 'resolution too high, change it to 1280x1024■60fps'.
But i cant do that if I'm unable to login to my desktop. And actuallt i DID reach safe mode trough F8 but i screwed it, I changed the resolution in system settings, cuz i could not reach the graphic driver... so i restarted my computer without any profit, and now i can't get back to safe mode either...
View 3 Replies
Sep 6, 2015
I recently re-installed QuickTime 7.7.6 (7.7.8 doesn't won't install on Windows 10 for some reason) but whenever I try to open it I get "Please Install Apple Application Support". Furthermore, Adobe After Effects still can't detect a QuickTime Player on my computer. I can't seem to find the Apple Application Support on Apple's website and I don't trust the other sketchy websites google provided.
View 1 Replies
Jul 29, 2015
Is there a way to disable Windows Media Player's new native FLAC support, so I can use external codecs such as LAV filters with it again, as well as 3rd party metadata plugins like WMP Plus?
When using the native FLAC support, basic metadata tags for flac files are not added to the library, such as the Year & Contributing Artist field - whereas WMP Plus imported those over without any problem... However they now refuse to work with WMP as it detects that WMP now supports it, so how can i turn that support off? I've disabled Windows Media Foundation but that's not made any difference for FLAC files, it's still playing those natively.
View 6 Replies
Aug 6, 2015
I performed the Windows 10 upgrade. Since that was completed I've been getting a receive error in Outlook 2013:
Outlook 0x800ccc1a - Your server does not support the connection encryption type you have specified.
I can send emails, but am not receiving.
I did some research and found a tip to do a cmd prompt with:
sfc/scannow
I tried doing this many times. It always ends with this message:
Windows Resource Protection found corrupt files but was unable to fix some of them. Details are included in the CBS.log.
The scan does not fix the email problem I'm having.
View 10 Replies
Aug 1, 2015
We use a lot of VPN PPTP Connections. On most we turn off "Use default gateway on remote network". See the image below that shows where this setting is turned off.
We cannot open the properties for Internet Protocol Version 4 on VPN connections under Windows 10. This is located at Network Connections and Properties of a VPN Connection. Networking Tab, then select Internet Protocol Version 4 and click Properties. But under Win 10 the properties dialog does not open.
This has been tested on several Windows 10 systems and we have enabled Administrator and tested under that login as well.
View 8 Replies
Jan 22, 2016
After the major Windows 10 upgrade that happened I think in late November to early December of 2015 my network connection started dropping periodically. This is wired connection directly to my router and I've done all the netsh winsock reset and other solutions listed all over the internet, but like clock work I lose internet connection to just my desktop. All my wireless devices continue to work just fine. When I select repair connection I get the error of protocols are missing. The adapter has a visual status of identifying network. I thought it was a DHCP issue, but it still happens with a static IP address. This so frustrating as the only thing that fixes it is a reboot and then it seem like the clock resets for another 24 hours. I've tried going to device manager and updating drivers but it tells me the drivers are up to date. I've uninstall the drivers and allowed the OS to reinstall them to no avail. I've even deleted the adapter and restarted and allow it to find the hardware and re-add the driver and none of this seem has fixed the problem.
View 2 Replies
Jan 6, 2016
I have several PCs at home as well as music streaming devices such as Pure Sensia and Freecom MusicPal. The PCs run a mix of Windows 7 HP and Ultimate all 64bit. I use Serviio to share music to the streaming devices and PCs. The PCs all use password protected network shares, and I selectively share certain folders from different PCs to enable both simple file sharing and backup which are simple script driven processes.
All has been working reliably for years until (Dum-Dum-Dum!) Windows 10...
A new laptop arrives with Windows 10 preinstalled.
I've got it up and running but cannot work out how to add Microsoft cloud accounts, such as those directly linked to OneDrive, onto the windows 7 PCs to enable password protected sharing to and from this new laptop.
The accounts have the same usernames on each flavour of windows PC, but the windows 10 version also has an email.
View 9 Replies
Feb 23, 2016
I am on windows 10, tried to map my NAS using map network drive but says "Windows cannot access Nas102 check spelling or might be problem with your network. Next, I tried to map a specific folder inside Nas102 and it worked! For example Nas102Music I also tried to make a fake folder name and map that for example, Nas102FakeFolder and the error said check spelling of "fakefolder" Nas102 was detected but not the fakefolder. trying to connect to the whole NAS instead of just mapping individual folders inside of the NAS.
View 9 Replies
