Networking :: How To Quickly Turn On Dial Up Broadband Connection
Feb 10, 2016
How to create a Dial-up, broadband connection shortcut placed on the desktop. B4 the shortcut I had to:
-1- click on the R-side of the task bar icon
-2- Click on the broadband strip on top
-3- Click on the connection
-4- click on Connect
Creating a shortcut from there (Settings -> Network & Internet -> DIal-up) onto the desktop actually creates an extra step since it defaults to VPN instead--and even if it didn't it would still be 4 steps. Is this any way to make this a 1 or 2-step process?
Can't connect to broadband connection. The Modem (or other connecting devices) has reported an error
While I troubleshooted in network and sharing center I got "There might be a problem with the driver for the Ethernet adapter" And "There might be a problem with the driver for the wi-fi adaptor". I am using Windows 10 ....
i remember i had the similar issue with the technical preview too. but i thought MS will fix it in final version. but it is still there. no matter if i connect via nokia pc suite or create dial up manually. no progress.
As you all know some people use dial up connection. I am one of them. I would like to click my dialup and automatically connect rather than viewing the " Username and password window " as I have saved UN and PW anyway, Basically, I would like to make it fully automatic, now this is the problem as can be seen in the ATTACHMENT.
It shows, lack of options in windows 10 when it comes to tweaking options for dialup. So, how to do it without GUI. As I downloaded and install the same file to install my dialer, I know there has to be a way to " Remove the tickmark from highlighted fields in the above pic.
I am using lumia 520 it is uanble to turn off data connections as i know this is one of the problem in tp 10051!!! When will the future build available???
We use a lot of VPN PPTP Connections. On most we turn off "Use default gateway on remote network". See the image below that shows where this setting is turned off.
We cannot open the properties for Internet Protocol Version 4 on VPN connections under Windows 10. This is located at Network Connections and Properties of a VPN Connection. Networking Tab, then select Internet Protocol Version 4 and click Properties. But under Win 10 the properties dialog does not open.
This has been tested on several Windows 10 systems and we have enabled Administrator and tested under that login as well.
I got me a new microphone and like most all microphones for PC there is no on and off switch, so on that note how can i mute and unmute it quick without having to click several things to get to the mute stuff. It saves also having to unplug and plug it in every time which would eventually we're usb ports out.
Windows 10 seems to have changed the permissions settings to all my files and folders - and I have lot of them (documents, photos, music etc).
I must have at least 30 000 images stored as I'm a pro photographer and thousands of documents. I currently can't save or change anything as I'm told the files are read-only and I don't permission to do that. This is seriously delaying my work.
I'm not on a network and I am the administrator.
A) There is a universal way to do this throughout my drives (C and D) quickly or if I have to do it by folder (which could take forever).
B) The easiest way to do it.
C) Microsoft are aware of how they have seriously messed up our computers and if they are doing anything about it.
I have the Hyperx Cloud II and the Logitech Z523. The headset is connected with and USB cable and the speakers use the normal 3.5mm jack. It's just annoying to go into playback devices and set it back to either one, so my question is that is there a faster way to do it? Also, I have windows 10...
I keep trying to turn streaming on and it keeps turning off. My receiver is flagged "device access is blocked". I check the box marked "allowed" and the device changes to "allowed access using default settings". Then I click "OK". When I go back into the streaming options the "allowed" box is blanked and my receiver is back to the "device access is blocked" setting. When I did this on Windows 7, piece of cake, it worked. On Windows 10 nothing but a giant hassle. What's worse, I just did this this morning and it worked!!! I played a whole bunch of music on my receiver. Later today I re-booted and now the streaming is gone and I cannot turn it on!!!
I have Windows 10 laptop hooked up to an ethernet connection which has been working well for the past 6 months. On 2/18/16 it stopped working. I traced the problem to the Qualcomm Atheros network Controller/ Killer E2200 Gigabit Ethernet Controller: Internet status > IPv4 Connectivity: No network connection IPv6 Connectivity: No network connection Clicked: diagnose --> System checked & reset, with IPv4 Connectivity and internet access restored.
This resolved the problem until 3/4, following a Windows 10 update. The above solution no longer works. Clicking 'Disable this net work device' and then enabling it again restores IPv4 Connectivity and internet access for a limited time but loading a new site or page is slower than it was prior to the emergence of this problem on 2/18, and then the connection is again lost after maybe 10 to 20 minutes.
Since I downloaded windows 10 I keep getting no internet connection before I log on. I called my internet provider and she had me checking a lot of things before she had me to type Device Manager in my search bar and look under networking to see if anything was off. Both my Ralink RT 3290 802.11 bgn Wifi Adapter and my Realtek PCle GBE Famili Controller had a yellow triangle with an exclamation mark in the middle beside them. She had me to right click on them to disable them, then go back and right click again to enable them. My internet connection came back but it keeps losing connection about once a week. I didn't have this problem before the download. This is a HP Desktop and I am connected wireless.
After upgrading from Win 8.1 to Win 10 media streaming is off and when the "Turn on media streaming" button is selected there is no effect, no error message, no action. Since this feature was on before the upgrade I'm assuming some dependent services where either turned off or not installed. I've verified WMP is fully functional with shared services on. I've successfully joined a Homegroup, allowing me to play media from other computers, so I'm not looking at my firewall for now. My other ACER laptop which was also upgraded to Win 10 from 8.1 has no problem with this service. Any troubleshooting guide/white paper that shows all the dependencies.
I have a desktop computer with built in WiFi and Bluetooth. I have installed the latest drivers from the MFG website (ASUS ROG Maximus VII Formula). The problem is that Airplane mode will not disable. When you click on it, it shows that you clicked on it, but immediately resets to "On" no matter what.
You will also notice that WiFi and Bluetooth are missing from the control panel.
I have made sure both devices are enabled at the BIOS level, however, due to Airplane mode being forced on, they do not even show up in the device manager (even under "show hidden").
I do not thing this is a BIOS/Driver issue; this appears to be a bug.
I'm using a Dell E7240, did a fresh install of Windows 10. I can pick up all sorts of WIFI connections and connect to them successfully.
However when I wanted to use my internal 3G modem it tells me that the "radio is off" and I can't enable this in settings? Its greyed out, f I enable flight mode is greys out the WIFI and Bluetooth switches. When I disable flight mode it allows me to turn WIFI and Bluetooth off/on but "radio" remains greyed out.
Checked BIOS settings, checked driver for the Mobile Broadband Card, disabled and enable the adapter. Still does not want to allow me to enable the radio. I can manage the SIM PIN so I can change it or turn on or off.
It even shows me the network provider if I disable the SIM PIN, but the radio remains off!
My PC would be connected to WiFi, but I wouldn't be able to go on any site. I restarted my PC and the damn thing locked up on the HP logo screen! So I had to hold the power button to turn of my laptop.
I upgraded my ageing Dell Inspiron 530 desktop PC this morning from Win7 Ultimate to Win10 Pro. The PC is connected to the router via ethernet cable.All seems fine in terms of the OS, but I have no internet access. I know the router's OK as my other devices are fine.When I run the troubleshooter it flags up "There may be a problem with the driver for the Local Area Adapter".Digging further, it seems the issue is "Windows couldn't automatically bind the IP protocol stack to the network adapter"
Looking at Services, I found the Wired AutoConfig and WLAN AutoConfig services weren't running were set to Manual. I changed these to Automatic and rebooted, but still no joy.The network adapter is an Intel 82652V-2 10/100 and Device Manager says it's working normally and the driver is up to date.
Connection to Internet through Wi-Fi is not happening after that though it is happening via LAN Cable.
Whenever I try to connect through Wi-Fi it gets stuck showing Limited Connectivity and No Internet Access.
I went through some threads and found that it can be solved by disabling "Block Internet Connection Sharing" setting in Bit Defender but I am not using Bit Defender.
I am using Windows Defender instead and am not able to find such setting in that.
So, my wireless router went out on me yesterday during a thunderstorm, which I replaced today. My desktop will not connect to the wireless network at all. I have it connected right now, through my cellphone's hot spot. Also, I can connect my phone to the wireless network as well as a different desktop and get internet access, which suggests something wrong with this desktop, I would imagine.
Network Adapters:
ASUS PCE-N10 11n Wireless LAN PCI-E Card Broadcom NetLink (TM) Gigabit Ethernet
I'm sure some additional information may be needed but I'm not sure what you would need, so I'll gladly provide what I can if needed.
I've been running Windows 10 on my PC for a few months now. I upgraded from Windows 7 and absolutely love it! However, I am having an issue. When I use my PC on a normal basis, Everything is good. Internet connection is perfectly stable, no problems. But ALWAYS if I restart my pc, and SOMETIMES when I put it to sleep, when my computer turns back on, my internet connection can't be detected. I have to unplug it for about 5-10 seconds and do a full reboot in order for my internet connection to be detected by my pc. None of my other devices have this issue. I have an xbox one, Smart tv, my phone, laptops, etc. connected and none of them have the same issue.
After spending many anxious days trying to elude a hacker, I Reset my desktop PC yesterday to get a clean Windows 10 install. The legacy network connection I know is routed through the Hacker who is using Teredo tunneling software. I am trying to set up a new and secure VPN network connection to the Internet. But the PC keeps whirring without any visible connection progress. The Network Connection dialog box tells me that Windows 10 is trying to create a WAN Miniport (IKEv2). The legacy connection is on Ethernet with a Realtek PCIe GBE Family Controller, which I imported to the new Windows install.I am worried that I don't have the correct adapter settings and that a new connection can not be created while the legacy one still exists.
Why do I constatnly lose my internet connection since upgrading to Windows 10? Did not have this problem with Windows 7 and Century Link. Once it is gone, cannot get it to reconnect. Keep getting a reset error message each time when running the diagnostics. If I can't resolve this soon, will be going back to Windows 7!!
If remote computer has user password all works well,but if no user password can't log on. In windows 7 this was not a problem,is there a work around so if two windows10 computers have no user passwords you can connect?. This is on a private home network. Don't want to use third party software for this process.
