How to setup my office's wired network with one main server through which all the traffic goes while filtering everything I have blocked?
Also, I have a 5 port hub, can I work with it or do I need a bigger switch?
I only have 5 PCs in my office.
I have been using a wireless connection but have decided its better for online gaming if i go wired/ethernet.
I am having a problem "unidentified network/ No internet access"
Now in the past with an xp pc i connected the ethernet cable and that was it i assumt there is some sort of set up i need to do for win10?
Also it may be worth letting you know i am not directly connected to the router via an ethernet cable, i am using the plug in things that sends the signal down the house electrical wires. Maybe this is an issue although it wasnt on my xp pc.
I have DELL Inspiron 14R N4010. Automatic upgraded to Windows 10 Home. Previously I have Windows 7 Home Premium. After upgrade I didn't see the wired network adapter. However my wifi is working fine and can access Internet. I tried to re-install the LAN driver (Atheros AR8152 PCI-E Fast Ethernet Controller Driver); it ask for upgrade/repair/de-install means driver is already present in the system. In spite of that upgraded the dirver (got the upgraded driver setup from Dell). Unfortunately, the device is still not visible in device manager.
View 4 RepliesI'll have connections available on my computer (Windows 10 Home 64-Bit HP) but whenever I click the connection menu, they don't show up, which means I have to reset the modem, wait the 15 minutes it takes, and then the connections FINALLY show up. Once I'm connected however, if I click the menu again, the connections wont show up. The image I've connected shows what I'm talking about. I can wait for a long time and connections still don't show up. I was wondering if there's a way to troubleshoot this without resetting the modem every time I want to use my computer.
View 2 RepliesIs Remote Desktop only available on Windows 10 PRO? I have Win10 Home and the option to "Allow remote connections to this computer" is not present.
View 4 RepliesI have a new HP laptop win 10 installed and I like it very much but I have an issues with One Drive .
I use my WiFi connection at home for browsing and usual stuff which is fine and One Drive uploads to the cloud with no issues and of course does not affect my data allowance as my Internet connection is unlimited.
In my workplace I do not have a land line and use a talkTalk MiFi dongle with a 5gb limit . I connected to the MiFi and carried on as normal but realised that the One Drive used my data quickly and soon I had a message that I had no data left .
My enquiry is can I get One Drive to ignore my MiFi connection and only do the uploads on my home internet connection only ?
I have a pocket Wifi Device, however, it is NOT using Wifi connection, as I have it connected to my PC using an USB Cable. Every morning I turn on my PC, it creates a new network connection, for example "Network 7"
How do I remove Network 1 to 6, and where are they located?
And how do I stop it from happening, as it seems it will keep going to Network 8, then Network 9 and so on.
I installed Oracle's virtualbox on a windows 10 machine. I'd like to download software to it like adobe reader. I can't. I can start up internet explorer and connect to the web and if I click on links it goes to those links. If I try to go to google.com I get a message that it can't make a secure connection. I tried downloading adobe acrobat in windows 10 and transferring it with a shared folder to the virtual machine. I was able to transfer to the virtual machine but when I tried running it, it tried to connect to the web and could not. This looks to me like a security problem because the browser can connect to some sites in the virtual machine and only complained when they were secure sites. Is there some security setting in windows 10 that could be blocking virtualbox from connecting to secure sites?
View 4 RepliesMy desktop is connected to my router by Ethernet. However, the printer I use is in my wife's office on another floor. It is a wireless Epson Artisan 730. I have added a Dlink DWA-171 wireless usb adapter to my desktop to print wirelessly to the Epson.
However, every time I want to print, I have to disable my Ethernet connection so the WiFi connection will see the printer. Then I'm done printing and I re-enable the Ethernet (faster, more stable).
My assistant in the other room accidentally unplugged the router and I lost connection. I told her to plug back in. I clicked the correct connection when it appeared, but I did it too soon. From that point on, when I clicked the systray icon, nothing happened...no display of available connections. Over and over I tried clicking the systray icon and no window popped up to show available connections. If I hovered over the icon, it did say connections available..
Then I right-clicked and went into the Network & Sharing Center. I could never find where it showed available connections like in Windows 7.
Finally, I had to reboot and I had my connection back.
If this happens again, where can I find available connections so I don't have to reboot? Or even better, is there a way to get the systray icon to again be responsive?
At my college we login to our accounts at the school using our email address and passwords. The domain suffix on the email points to which server we are logging into. So typing "*@domainhere.com" will login to the server paired with "domainhere.com". Windows 10 prompts you at login to provide this email and password. When you login, there are 2 drives mounted, one local and one which is on the server so you can login on any computer and have your files accessible, somewhat like a VPN or FTP storage server.
I run a small team of look developers and have a series of render an storage servers. I am interested in setting something like this up but my knowledge of systems management is limited to what I need as a look developer. This is a system often implemented into pipeline systems and version control systems in look development.
I am connecting to the VPN server with Windows 10 built-in provider using L2TP/IPsec protocol withusername/password and a Pre Shared Key. Everything is fine except the fact that every 1.5 hours it disconnects automatically. Then I have to go to VPN settings again and press the Connect button to connect to the VPN server.
My friend doesn't experience this problem while connecting to this VPN server from his MacBook. This is a very big issue, that can compromise the privacy of a user.
When I'm accessing my media library on the computer with my phone it does show all movies/songs in the same folder. I have chosen to share different folders like, E:movies E:kids E:adults C:user*videos. all those folders are shown as only one folder on the device i'm accessing my library with. Sub-folders within the paths does show.
In Windows 7 the folders did not batch up as only one folder, each path was shown separately.
I've been having issues lately with the "Use a proxy server" setting. Initially whenever I would set the slider to "off" and close settings, it wouldn't save. I found that the issue had to do with the UAC being enabled. After I disabled UAC, the setting could be preserved temporarily, i.e., it would revert to "on" after restarting. It's causing serious network slowdowns and I'm at my wits end with Windows.
View 1 RepliesI need to share a window on my Windows 10 PC via VNC (to an Android device). UltraVNC says it can share a single window, but I can't get their VNC server to do this, only the entire Desktop.
VNC servers that can share a single window?
I am dated on things HTPC/Home-Entertainment and need a puzzle piece: What is the right way to pull content off the web [say PBS documentaries from their site] and make available to all the HDTV's connected by ethernet and COAX to household fabric? Presumably the same network & server setup would stream stored movies, home vid, etc to any of the HDTV's.
View 7 RepliesI upgraded my PC from Windows 7 Ultimate (64-bit) to the Windows 10 'replacement', which is Win10 Professional (64-bit). All went extremely well, no problems, the Windows 'upgrade' retained my settings, all 'mapped' network drives were there, everything was totally great. I easily accessed, created and and saved new documents to folder locations on the server with no 'hesitation' whatsoever.
HOWEVER... SUDDENLY, within the past eight to ten days, where I once had virtually 'immediate' access to shared folders on our aging Windows Server 2003, I now seem to be required to 'wait' for upwards of 8-10 seconds before folders on the server are 'accessible'. For instance: I'm setting up this year's 'fiscal year' folders for my business invoices on the server. As I attempted to create these folders, I had to 'wait' to be able to 'see' and then be able to access the 'Invoices' folder on the shared drive. Then (as I always have done) I 'right-click' within this folder to create the new folder for FY2016 and once again, it takes 8-10 seconds to be able to create this folder, but eventually this is successful. Then I created 'sub-folders' within this folder (IE: "QTR 1") with no delays..
But then in creating a sub-folder within this sub-folder (IE: 01-JAN), there's the same 8-10 second delay. Continuing on with the creation of folders through the full year, SOME are created immediately - OTHERS suffer from this same 'delay'. It is almost as if my PC must 're-negotiate' with the server - determining 'rights' (?) - I dunno, but it truly frustrates me.... I know full well that I MUST replace this old server OS, since Server 2003 is 'dead', but - well, I simply haven't taken the time. Time is money - and I don't have enough... so you know what gets 'first efforts'.
But since I have been operating like this since BEFORE Windows XP was even released (albeit, yes, on a Windows NT Server, back then) with nothing even resembling this 'hesitation' ... Why now, after this 'mandated' upgrade to Windows 10, is this 'hesitation' appearing in simply accessing what was once practically "immediate'..? The whole network is all CAT-5 'gigabit' Ethernet: both of the switches are gigabit, server connection is gigabit, my PC is gigabit, cripes even the NAS is gigabit (yet another 'storage location' on the network...) and where the NAS was 'slower' earlier, it is now 'faster' to access and store on the NAS instead of the Windows Server.
Starting with the Redstone insider previews, my HP mediasmart home server works for automatic backups, and I can open the server console to manage the server. But it is impossible to map a folder on the WHS to a drive.; none of the shared folders on the WHS are visible, and the homes server is not visible under network. Troubleshooting indicates a missing protocol, but has no solution. Everything works fine on the no-preview PCs on the network. I am concerned that MS is abandoning the WHS and am worried about future official updates.
View 5 RepliesTrying to set up a network for the first time. My intention was to share public folders but when I right click on my user folders (e.g. PCUsersDaveDocuments they are shown as "Shared" and clicking on "Stop sharing" doesn't seem to do anything. Am I missing something.
View 3 RepliesI have three computers wired to my D-Link DSL-504T modem/router.
Since upgrading two of my PCs to Widows 10 Pro (activated, clean install) I can no longer get reliable access to my routers configuration screen (192.168.1.1) through these PCs, although my third computer that is still running WinXP has no problem at all. Internet access on all three computers is unaffected and works perfectly.
The two W10 computers get to the router login screen, accept my username and password and then try and display the next status page whereupon the following happens:
Firefox: Stops with 'The connection was reset' error
Edge and Internet Explorer: Sit waiting forever (or as long as I'm prepared to wait!)
Chrome: Occasionally displays part of the status page, but mostly just sits there waiting.
The WinXP PC just sails along, displaying every page instantly and putting two fingers up to its more modern brethren!
I've reset the router and that makes no difference. I've turned off the Windows firewall and that makes no difference. It can't be my AV software (NOD32) as that is only running on one of the W10 PCs. I've flushed the DNS and tried just about everything I can think of and still the two W10 machines fail.
After Windows 10 Update to 1511,10586 , none of the wired, network computers/drives are visible in the "Net Work" window. The network has One other, wired, computer and WDMyCloud Drive that are no longer visible.
Using the "Run" option, with addresses, I can access any computer or shared drive. File copy etc between computers works fine.
WakeOnLan reports that it cannot find the host computer, but it wakes it up anyway.
I have entered the credentials in Credential Manager and updated the drivers for my Realtek Ethernet card. Network Diagnosis finds no problems.
The problem exist,after the update, on both wired computers. I have tried two previous existing administrative users and one administrative user added after the update.
I recently got rid of a cabled keyboard in favor of a smaller bluetooth keyboard (MS Mobile 6000). Everything is great except that now, I have a hard time putting my PC to sleep. In fact, it tends to wake up after 30 seconds or so. I'm pretty sure this is due to the BT keyboard.
View 3 RepliesSo basically I installed windows 10 3 weeks ago.Its been working perfectly fine until I got this problem today.when I click on the wifi at the bottom right.it tells me no connections are available,I tried re booting my desktop,uninstalling and reinstalling the network drivers but nothing works.the weird thing is that it says the drivers are working properly but yet it won't let me connect.also my network adapter settings folder is empty.
View 5 RepliesWhat these Windows system connections were for? Just want to know so I can decide whether to block the destinations, or executables in my firewall.They occurred while I was logged in, but not running anything yet. There are other connections, but I've listed these ones because they seem to be new to Windows 10.
Name: SIH Client
Version: 10.0.10240.16384
File Path: C:WindowsSystem32SIHClient.exe
Connection Origin: local initiated
Protocol: TCP
Local Address: EDITEDOUT
Local Port: 49487
[code]....
My network icon has a Red cross on it and says no connections are available . I have a toshiba satellite. and my windows 10 was working fine.I used to hook up no problem.
I went to settings and open network and internet, I fond no wifi section in it.
Windows 10 upgrade results in the Network Center not showing any network connections. The troubleshooting wizard does not detect the issue or rectify it. There are a lot of reports on the web supposedly related to pre-installed Cisco VPN or other VPN software.
The downside is that without this feature, crown jewels... Cortana and Edge do not work.
