My HP laptop keeps wanting to start in the airplane mode. I have reset it to the normal WIFI mode many times and it keeps going back to Airplane mode. I have contacted HP support twice. They took control of the computer and did there thing twice. Ptoblems is again occuring.
View 1 RepliesSince my daughter (2 years old) switched on airplane mode last week, I'm no more able to switch it off and go back to wifi connection.
No more WiFi / airplane mode icons in wifi window on the taskbar, no more airplane mode option on network settings...
Everything disappeared, apart from the airplane mode icon in the right corner of the screen, which I can not switch to WiFi mode...
For some reason the Airplane mode setting can not be turned off in Network and Internet Settings, Network setting from taskbar, or Action center from taskbar. I am using my desktop and will never have it on an airplane. However, the computer does have a wifi adapter which I could use and it is able to be enabled.
Also, have other wifi devices on my home network, another PC and a tablet, a wireless printer and all are working fine. It must be a 'bug' on the desktop but someone should know that it is there. On the other PC, which is an all in one, the Airplane mode is not even in the settings anywhere.
While using Windows 7 I often disabled my wireless connection by using the f12 function key. It was disabled when I upgraded to Windows 10 via my ethernet connection. The f12 key now only controls airplane mode. I cannot enable my wireless adapter. I have an HP Pavillion dv7 notebook computer. HP says they offer no Windows 10 compatible upgrades for this model. Is there a solution other than restoring Windows 7?
View 6 RepliesI have a desktop computer with built in WiFi and Bluetooth. I have installed the latest drivers from the MFG website (ASUS ROG Maximus VII Formula). The problem is that Airplane mode will not disable. When you click on it, it shows that you clicked on it, but immediately resets to "On" no matter what.
You will also notice that WiFi and Bluetooth are missing from the control panel.
I have made sure both devices are enabled at the BIOS level, however, due to Airplane mode being forced on, they do not even show up in the device manager (even under "show hidden").
I do not thing this is a BIOS/Driver issue; this appears to be a bug.
I just upgraded from windows 7 to 10 and when using Edge the airplane mode keeps going on. I put it to off in network and airplane mode then it goes to the internet but as soon as I do anything airplane mode comes back on keeping me from getting on internet. Cannot even get any updates
View 1 RepliesI am using hp 14-r029tx and windows 10 pro. The problem is, I have my wifi on. But the airplane mode status shows activated which means airplane mode is on. If my wifi is on then how come airplane mode is also on? Sometimes wifi takes too much time to load and sometimes have to reboot also. my wifi adapter is QUALCOMM Atheros qca 9565 with Bluetooth.
View 9 RepliesI have windows 10 pro and in my notifications and action center, airplane mode is in blue and wont let me turn it off, I'm using a desktop and not a laptop anyway to fix this or is this normal?
Also in the notification and action center, the wifi tab is greyed out.
I am on 10565 Pro version though this occured in last build too. Whenever I come back to my pc in the morning after putting it in hibernate mode for the night my airplane mode is always on. I notice it first by my bluetooth mouse being disconnected and then wifi connectivity.
The one fix I tried is unchecking the allow to shut off option to save power under device manager properties for my wifi adapter.
Using a Dell XPS 9343
since I have updated my dell laptop an inspiron 15 3000series to windows ten I cannot turn off airplane mode and thus cannot turn my wifi on. I have tried everything I found on the net from device manager to command prompt downloading new drivers and yet also to simple stuff like pressing the PrtScr key. I am desperate, I am an international student n the only way I can call my parents for free is via the net(i.e wifi) but it is not working.
View 2 RepliesI just (Dec. 19, 2015) completed the latest update to Windows 10, had trouble with my volume icon, fixed it, then found my wifi icon is stuck in airplane mode despite the laptop having full wifi functionality. Tried turning system icons on and off through the "task bar and start menu properties" dialog box, tried various combinations of "on" and "off" while restarting the entire system, nothing works. I've connected and reconnected wirelessly by both using a physical button (shaped like an antenna emitting parentheses-shaped waves) and by using the icon that's now stuck in airplane mode. I can access the internet, but I can't see the status in the task bar as I used to. All I see is the icon shaped like an airplane, even while I'm clearly not in airplane mode and when I should therefore be seeing the wifi icon.
View 3 RepliesI will be keeping the wireless turned off most of the time on my desktop, as I use it for live pro audio. Is there a registry hack to put the switch in there, even if the computer is not a laptop???
View 9 RepliesBut I'm currently browsing the internet and typing to you.
In fact - I can do virtually everything (League; Steam; Skype; etc) except use any OS feature that requires logging in -
e.g. Mail, User Accounts, Shop, etc. Then it says something along the lines of "Cannot use this service without an internet connection - please connect and try again." When I run Network Diagnostics as the prompt recommends - it says I am connected and cannot find a problem.
It doesn't always happen - but it seems to be determined on start-up. If I restart it now it might be working next launch - but 75% of the time it will encounter the same issue. It's been happening for months now but I've sort of gotten used to using my phone to check my emails - but I've now encountered an issue with one of my hard drives being unable to be searched (tried indexing, etc) and the only step I've found that I haven't tried says it could be a corrupted user account - but I cannot update my user account without "connecting to the internet". -_-
The system is up to date. No driver updates available.
Since I downloaded windows 10 I keep getting no internet connection before I log on. I called my internet provider and she had me checking a lot of things before she had me to type Device Manager in my search bar and look under networking to see if anything was off. Both my Ralink RT 3290 802.11 bgn Wifi Adapter and my Realtek PCle GBE Famili Controller had a yellow triangle with an exclamation mark in the middle beside them. She had me to right click on them to disable them, then go back and right click again to enable them. My internet connection came back but it keeps losing connection about once a week. I didn't have this problem before the download. This is a HP Desktop and I am connected wireless.
View 3 RepliesI upgraded my ageing Dell Inspiron 530 desktop PC this morning from Win7 Ultimate to Win10 Pro. The PC is connected to the router via ethernet cable.All seems fine in terms of the OS, but I have no internet access. I know the router's OK as my other devices are fine.When I run the troubleshooter it flags up "There may be a problem with the driver for the Local Area Adapter".Digging further, it seems the issue is "Windows couldn't automatically bind the IP protocol stack to the network adapter"
Looking at Services, I found the Wired AutoConfig and WLAN AutoConfig services weren't running were set to Manual. I changed these to Automatic and rebooted, but still no joy.The network adapter is an Intel 82652V-2 10/100 and Device Manager says it's working normally and the driver is up to date.
So, my wireless router went out on me yesterday during a thunderstorm, which I replaced today. My desktop will not connect to the wireless network at all. I have it connected right now, through my cellphone's hot spot. Also, I can connect my phone to the wireless network as well as a different desktop and get internet access, which suggests something wrong with this desktop, I would imagine.
Network Adapters:
ASUS PCE-N10 11n Wireless LAN PCI-E Card
Broadcom NetLink (TM) Gigabit Ethernet
I'm sure some additional information may be needed but I'm not sure what you would need, so I'll gladly provide what I can if needed.
I've been running Windows 10 on my PC for a few months now. I upgraded from Windows 7 and absolutely love it! However, I am having an issue. When I use my PC on a normal basis, Everything is good. Internet connection is perfectly stable, no problems. But ALWAYS if I restart my pc, and SOMETIMES when I put it to sleep, when my computer turns back on, my internet connection can't be detected. I have to unplug it for about 5-10 seconds and do a full reboot in order for my internet connection to be detected by my pc. None of my other devices have this issue. I have an xbox one, Smart tv, my phone, laptops, etc. connected and none of them have the same issue.
View 9 RepliesWhy do I constatnly lose my internet connection since upgrading to Windows 10? Did not have this problem with Windows 7 and Century Link. Once it is gone, cannot get it to reconnect. Keep getting a reset error message each time when running the diagnostics. If I can't resolve this soon, will be going back to Windows 7!!
View 3 RepliesI had windows 10, free download, on 25 of August, upgrade from windows 8, and the internet connection was fine till about 10 days ago. Trouble shouting result.."Ethernet does not have a valid IP configuration" . Contacted my provider Talktalk, was sent latest router, can connect with mobile wireless to router, can connect with laptop (Windows 7) hard wired, cannot connect with my desktop (hard wired) on which windows 10 is down loaded.
Have checked cable to desktop by using cable with laptop.
What do I need to do to get connected to the internet with my desktop?
Just upgraded to Windows 10, no internet connection. Had no problems before on 8.1.
No network adapters are recognized (Bluetooth, Ethernet, WLAN). Have Atheros Qualcomm AR9485WB.
Device manager says all is OK, but PC settings say no network adapters detected.
I tried to uninstall/install multiple versions of drivers but nothing works.
Clean W10pro installation from scratch. No upgrade. Quad Core intel @ 3.??ghz with 4GB on an intel board. Basic workhorse machine. Windows is up to date and nothing else has been installed to the machine. No changes to OS from defaults upon installation. Device Manager shows all attached devices are working properly. USB Wireless card connects to the access point just fine.
ICS is enabled on this adapter and shows as "shared". Ethernet adapter is auto-configured by ICS (IP and SUBNET). This adapter displays as "Unidentified Network" with or without cable connected. Under Status/Details: NO gateway. NO DNS servers.
Client Computer: same basic machine as above. Everything updated and functional.Ethernet adapter wired with standard ethernet cable to Host. (All this gear is modern and will not require hardline crossover)Ethernet adapter is set to obtain IP/DNS automatically.Under Status/Detail IP Address is 192.168.137.124 (DNS is working properly)Ping 192.168.137.1 successful without errors.
I disabled the firewalls. No improvement. Reset everything to defaults. Tried a "Bridged Connection" same "No Internet Access" results. In the end everything works except no internet access across the two adapters in the Host machine and there should be.
Today, when i opened my PC i found out that i have "No internet connection". The last time i used it was last night, and it worked like a charm. The problem is from the software itself I guess because other devices seem to be working fine connected to the internet. This also happened to me while using windows 8.1 but I got it fixed everytime with a simple "netsh" command. Now things aren't this simple, i tried multiple fixes and none of them worked. I tried to update the driver from the device manager but i can't find the microsoft and the producer driver, instead i find some outdated drives from like 2013.
View 9 RepliesIf I go to the network and sharing center on one of the computers on our home network it reports that it is not connected to a network, but this system can see other computers on the network and access the internet. The other computers cannot see this system, however. This system has an older X38 motherboard with an E8400 processor, but the initial in-place upgrade from Windows 7 had no problems at all.
I didn't notice the problem until I realized that about two weeks of backups across the network had failed. I have tried the repair tools in Windows 10 and have uninstalled and reinstalled the network adapter without success. I was hoping that the problem would be fixed by installing the recent big windows update, but windows update reports that it cannot connect even though I have internet access.
I upgraded to Win10 yesterday. upgrade could be a keyword for the future but since I upgraded everything has been perfect except my connection to the Internet. It's fine on startup but once I go on Edge, Chrome, steam or Skype it stops about 3 minutes in when using them. It doesn't come back unless I restart.
I'm using a Ethernet connect. All wireless devices are working fine, My LAN adapter is a Broadcom Netlink Gigabyte Ethernet. Turning router off and on again doesn't work. All drivers are up to date, apparently. No vpn.
I removed my McAfee to see if that changed anything but still no luck.
I don't know what to do now because this goes beyond my knowledge of windows 10 and computers.
My PC is over 5 years old, maybe that's a factor but it still surpassed all the requirements to run Windows 10
This brings me back to Upgrading and not full fresh install. I've too many family photos and other valuable projects. I dont have an external hard drive either, which I need soon as my current one is getting louder, but that's not the issue here. I just want to get on the Internet and enjoy my 120mb Internet speed!
Win10, diagnostic message is:"one or more protocols is missing".Running diagnostic as Administrator message is:" connection between access point, router or cable modem and Internet is broken".Have tried winsock reset, clean reboot neither solved the problem.What does ISO stand for. P
View 1 Repliesissue of no internet connection after update to 10130? The motherboard is using Realtek Gigabit Ethernet. A check indicated there is driver issue which block connection to my Linksys EA9200 router. There is no issue with the previous build.
View 9 Replies