I'll have connections available on my computer (Windows 10 Home 64-Bit HP) but whenever I click the connection menu, they don't show up, which means I have to reset the modem, wait the 15 minutes it takes, and then the connections FINALLY show up. Once I'm connected however, if I click the menu again, the connections wont show up. The image I've connected shows what I'm talking about. I can wait for a long time and connections still don't show up. I was wondering if there's a way to troubleshoot this without resetting the modem every time I want to use my computer.
Ok so got a new usb WiFi adapter. I installed the driver first which I downloaded on my phone then transferred to my pc via usb cable. Have tried reinstalling multiple times, still won't work. I'm guessing the problem is there's no win 10 drivers for it. NOTE: I did have a old usb adapter working with no driver before but not even that's working even with drivers uninstalled. The new adapter shows up in device manager with a problem indicated with a code 10.But not in network devices.
My Dell XPS 8900 worked perfectly fine for several hours, but now won't let me connect to the Internet. Another computer in the same room gets online without a problem, using the *same* internet cable.
I also get error messages on the Dell when trying to use system restore, and when trying to reset the computer. (I thought if I just started over it might fix it.)
There is an icon on the screen lower right of a little monitor, with red X over it. When I click that it tells me "no connections are available." I've unplugged and replugged everything (modem, router, computer) and nothing has worked. I have Windows 10. Anything I should do?
I have a new HP laptop win 10 installed and I like it very much but I have an issues with One Drive .
I use my WiFi connection at home for browsing and usual stuff which is fine and One Drive uploads to the cloud with no issues and of course does not affect my data allowance as my Internet connection is unlimited.
In my workplace I do not have a land line and use a talkTalk MiFi dongle with a 5gb limit . I connected to the MiFi and carried on as normal but realised that the One Drive used my data quickly and soon I had a message that I had no data left .
My enquiry is can I get One Drive to ignore my MiFi connection and only do the uploads on my home internet connection only ?
I have a pocket Wifi Device, however, it is NOT using Wifi connection, as I have it connected to my PC using an USB Cable. Every morning I turn on my PC, it creates a new network connection, for example "Network 7"
How do I remove Network 1 to 6, and where are they located?
And how do I stop it from happening, as it seems it will keep going to Network 8, then Network 9 and so on.
I installed Oracle's virtualbox on a windows 10 machine. I'd like to download software to it like adobe reader. I can't. I can start up internet explorer and connect to the web and if I click on links it goes to those links. If I try to go to google.com I get a message that it can't make a secure connection. I tried downloading adobe acrobat in windows 10 and transferring it with a shared folder to the virtual machine. I was able to transfer to the virtual machine but when I tried running it, it tried to connect to the web and could not. This looks to me like a security problem because the browser can connect to some sites in the virtual machine and only complained when they were secure sites. Is there some security setting in windows 10 that could be blocking virtualbox from connecting to secure sites?
My desktop is connected to my router by Ethernet. However, the printer I use is in my wife's office on another floor. It is a wireless Epson Artisan 730. I have added a Dlink DWA-171 wireless usb adapter to my desktop to print wirelessly to the Epson.
However, every time I want to print, I have to disable my Ethernet connection so the WiFi connection will see the printer. Then I'm done printing and I re-enable the Ethernet (faster, more stable).
My assistant in the other room accidentally unplugged the router and I lost connection. I told her to plug back in. I clicked the correct connection when it appeared, but I did it too soon. From that point on, when I clicked the systray icon, nothing happened...no display of available connections. Over and over I tried clicking the systray icon and no window popped up to show available connections. If I hovered over the icon, it did say connections available..
Then I right-clicked and went into the Network & Sharing Center. I could never find where it showed available connections like in Windows 7.
Finally, I had to reboot and I had my connection back.
If this happens again, where can I find available connections so I don't have to reboot? Or even better, is there a way to get the systray icon to again be responsive?
But I'm currently browsing the internet and typing to you.
In fact - I can do virtually everything (League; Steam; Skype; etc) except use any OS feature that requires logging in - e.g. Mail, User Accounts, Shop, etc. Then it says something along the lines of "Cannot use this service without an internet connection - please connect and try again." When I run Network Diagnostics as the prompt recommends - it says I am connected and cannot find a problem.
It doesn't always happen - but it seems to be determined on start-up. If I restart it now it might be working next launch - but 75% of the time it will encounter the same issue. It's been happening for months now but I've sort of gotten used to using my phone to check my emails - but I've now encountered an issue with one of my hard drives being unable to be searched (tried indexing, etc) and the only step I've found that I haven't tried says it could be a corrupted user account - but I cannot update my user account without "connecting to the internet". -_-
The system is up to date. No driver updates available.
I am connected to a wireless network but the connection is not showing on the Network and Sharing Center active networks. Also, I am unable to change my Network Location from Public to Private as there is no link on the Home-group page. I upgraded from Win 8.1 to Win 10 and already updated wifi drivers.
We have recently updated our four work computers to windows 10. Mine shows none of the network computers or printers under network. Under printers it shows one of our four printers but says driver unavailable and the spooler is not working.
I can get onto two of the other computers using a link under my quick access bar which was set up on our previous windows, so it can go to these computers, but they are not showing up on the network.
I have googled some of these questions and tried control panel/ administrative tools/ services/ to turn on UPnP Device host to automatic but it wont start and comes up with Error 1068: The dependancy service or group failed to start. Similar for SSDP discovery and Print spooler.
Under change advanced sharing options I pick 'turn on network discovery' but it wont stay on/keeps going back off.
I may be able to find a way to get onto the printers I need but would ideally like everything to show up properly under network.
When I'm accessing my media library on the computer with my phone it does show all movies/songs in the same folder. I have chosen to share different folders like, E:movies E:kids E:adults C:user*videos. all those folders are shown as only one folder on the device i'm accessing my library with. Sub-folders within the paths does show.
In Windows 7 the folders did not batch up as only one folder, each path was shown separately.
I recently upgraded the 3 machines on my home network to windows 10 home.
Currently when I open up "this PC" and click on network, only one of the 3 computers shows up, and this machine is not the local machine on 2 of them. However If I type in the UNC address for the other machines I can access them.
If I set up a home group all the computers show up in the home group roll out under "this PC" but still not in the network.
Something else that is strange. If I look at "network and sharing center" two of the the computer see one private network name and the other one sees a different name.
On my home network, the other Win 10 PC is suddenly showing in my taskbar near the task view icon. I like the idea and would like to set the other Win 10 machine to do the same but I can't find out how or why it decided to show up.
I have several server drives mapped to my Surface Pro 3 tablet, and from time to time they disappear from Windows Explorer and XYplorer (an Explorer replacement). They are still there and mapped, as Net Use shows them mapped properly. But to get them tho show up in either Explorer or XYplorer, I have to physically remap them (right click: Map Network Drive...) and when I do so they already show up with the proper drive connection but won't appear unless I finish the remapping. XYplorer has a tool to reconnect all network drives, but nothing happens there.
Why suddenly out of the blue my network quit showing one of my computers? I have a tablet and laptop both with windows 10. my tablet still shows both computers, but my laptop no longer shows the tablet. I didn't change anything. What can cause this and how do I fix it?
I'm on a Windows 10 Pro PC accessing a linux server with samba etc installed and working well (visible via Homegroup to both Android and Windows 7 pro). From the Win 10 box, if I type the name of the server in Windows File Explorer, then the shares from the server show up without issue. However, if I go into the Network folder, it does not see the linux servers - even though they are correctly configured for the correct homegroup. My windows 7 machines can see the servers in "network" as can my android devices.
Here's a screenshot. Note, the red arrows show what displays in Network folder (red arrows). If I click on the Server Name (HunterNAS in this case), the server shares are displayed and it shows up in the Network folder (blue arrows). Even after making the successful connection, display of another file explorer window > Network folder displays no linux server shares...
I have DELL Inspiron 14R N4010. Automatic upgraded to Windows 10 Home. Previously I have Windows 7 Home Premium. After upgrade I didn't see the wired network adapter. However my wifi is working fine and can access Internet. I tried to re-install the LAN driver (Atheros AR8152 PCI-E Fast Ethernet Controller Driver); it ask for upgrade/repair/de-install means driver is already present in the system. In spite of that upgraded the dirver (got the upgraded driver setup from Dell). Unfortunately, the device is still not visible in device manager.
I upgraded to windows 10 from 8.1, ever since then, my Huawei 173 stopped working. The led light flashes, yet the network signal is not showing, the display hangs and several other issue.
I have a Lenovo Thinkcentre preloaded with Windows 10 Pro. Sometimes when I go to File Explorer and click on Network it shows something called "Ralink Linux Client" connected to my home network. When I select its properties the only information I get is it's MAC address. But the funny thing is when I check my router's list of connected devices the Ralink Linux Client doesn't show up on my router's list even though it shows up on Network on my computer. I am using a Buffalo WHR-300HP router. I also have a Thinkpad notebook computer running Windows 7 Pro on my home network and this phantom device never shows up on Network on the Thinkpad. This Ralink Linux Client comes and goes on my Thinkcentre showing up sometimes but not all the time.
I tried researching this on the Web and apparently others have had this problem too both with Windows 7 and Windows 8. But I am reading conflicting information about what might be going on. One forum poster suggested that this means that the router connected to the network is picking up another router within range. Someone else suggested that this is actually something to do with the local router's internal components.
edit - My Thinkcentre is connected to my router via Ethernet. My Thinkpad is connected wirelessly.
I have recently upgraded to Windows 10. I have a homegroup setup on my home network which allows me to share the music files stored on my PC with phones & tablets etc for streaming.
Since the upgrade when I access the files using Apps like BubbleUPnP or MConnect the music files are all shown in one giant folder rather than being sorted into the sub folders (Artist, Album etc) as it is on my PC.
This problem has only occurred since upgrading to 10. I reverted to 7 to check and everything went back to normal.
