Been using this laptop since October with no issues. Upgraded to Win10 yesterday and now, every couple of hours, the laptop goes into airline mode. Once I was able to restore wifi in the settings area, but most of the time when you turn off (move the slider) to airline off, the wifi slider does not come on.
The keyboard method does nothing to restore wifi. My wife has had the same issue since upgrading two weeks ago.
Windows 10 keeps starting in flight mode!
View 9 RepliesEver since I installed Windows 10 some of my devices will suddenly get errors and stop working until reboot or the driver will completely disappear (also goes comes back to normal after restarting).
These are the devices that I've had trouble with:b
- Touch Screen (HID-compilant touch screen) [Disappears]
- USB Ports [Gets Error 43]
- Bluetooth [Disappears]
- Unknown Device (Not sure what this is) ["Drivers not installed." Error 28.]
They all start having trouble at the same time, it's instantaneous and there is no other indicator for it other than the "Device Plug Out" sound. I've tried looking for new drivers with the Windows wizard, uninstalling and then selecting "Look for Hardware Changes" , and rebooting--which, as I've mentioned before, temporarily fixes this.
I've found topics exclusively for the USB Ports error, and the rest just seem to be fixed by everyone through reboot, but I want a permanent solution. Otherwise I'll consider going back to Windows 7 or just leave Windows altogether.
Whenever I load the simulator, I get the splash screen, but it just goes to a black screen, no error messages, etc. just a black screen, if I hit ESC and hit Y, the simulator exits without a problem, I just can't see it.
Changed config from FULL_SCREEN=1 to FULL_SCREEN=0 and it works now, but it's not fullscreen anymore.
Both the Windows 10 laptop and the Windows Vista laptop have discovery on and file and printer sharing on. The printer is connected to the Windows Vista laptop. The Windows Vista laptop can see the files within the Windows 10 laptop. The Windows 10 laptop can see the Windows Vista computer but as soon as it tries to see inside it gives an error about "spelling of the name, etc." If using the diagnosis tool it says "One or more network protocols are missing from this computer". "Resolving problems as administrator" does not solve anything.
View 3 RepliesI have a laptop running Windows 7 that is connected to a printer. I am connected to the internet using a WiFi connection. I have a homegroup called workgroup. My wife has a laptop running Windows 7, connects to the internet using the same WiFi modem and prints using the printer on my laptop.
I downloaded Windows 10 on to my Windows 7 laptop and all of a sudden my wife can't print anymore. Microsoft, you've done it again. How I hate this!
I fooled around with HomeGroup settings on the Windows 10 laptop and the system attributes on my wife's laptop and now I can see her computer on my Windows 10 system. But I cannot see the printer on my system from her laptop.
I tried to click on my compueter from her laptop and I get a request for username and password. I don't know what username and password to use. I gather from reading the forum that I should put the name of my laptop in the username but I don't know where to look for the password.
I upgraded from Win8.1 to Win10 on my Lenovo Laptop and every thing was fine .Then i went and installed the Nvidia driver for my graphics card and restarted .On doing the restart i was getting a blank black screen. So then i went into safe mode and installed the Intel graphics drivers that came with my laptop and restarted .
On doing the restart I am always going into recovery mode now . Even if i try to boot in safe mode it goes into recovery mode. I tried even to do the windows repair via the recovery mode but it does not work.The only thing that i have is the command prompt in recovery mode .Can I install the latest driver via command prompt in recovery mode ? or how should i fix this issue ?
I have a Dell laptop with Windows 10 on it. When it goes into sleep mode, if I swipe the touch pad within a few seconds it will come out of sleep mode. However if I'm not at the computer so that it is in sleep mode for a while, then when I swipe the touch to pad wake it up sometimes it will wake up but sometimes it won't. If it won't wake up then I have to use the power switch to shut it off and reboot it.
View 5 RepliesI am having a hard time trying to get back to normal mode. My external monitor vga driver was automatically turned off when computer restarted in safe mode. Now, I am working blind, I know there is a sequels of keys to press when computer starts up in order to return to normal mode.
View 3 RepliesWhen I close the lid of my laptop, put it into sleep mode, or put it into hibernation mode, the laptop basically shuts down. The power light flashes on and off, but when I reopen the lid or press the power button to turn it back on, the screen flashes grey and reboots.
What I have tried:
Changing all of the advanced power options
Resetting my laptop (to before the issue started occurring)
Restoring my laptop to factory settings
Redownloading windows 10
Disabling the UEFI (BIOS) setting that allows the computer to be turned off to save power
Updating the drivers that were suggested on the windows eight forums
Downloading the chipset driver from Asus
Downloading the ACHI Link Power Management and trying all the settings
What I've done in the command prompt:sfc /scannow then Dism /Online /Cleanup-Image /RestoreHealth.I also tried the chkdsk command but there were no problems found
When I started noticing the problem:After I downloaded VMware's player and created a virtual computer with Ubunt
My Laptop( HP Pavilion 17 ) with 10586 build go to Hibernation from Sleep Mode.
I change the Power Options, but problem is not fix:
My current settings:
windows 10 has got some serious problem which is with the AEROPLANE MODE.
View 1 RepliesJust installed Win10 on my 4 yr old HP G60535D. Now I have have to re-boot everytime I shut the lid. Played around with power settings, etc etc but no luck. When I first open the lid, I can hear the computer running, a slight mechanical burp of some sort, then nothing... totally blank screen. I have to hold the power button down to shut it off, then re-boot. A 1st world problem for sure, but kind of irritating.
View 5 RepliesI have a Lenovo P580 laptop. The screen wire got shorted out, so I just always connected it to a TV and never really had a problem. I recently upgraded to Windows 10 from 8.1. After getting that issue with the start menu and cortana not working, I tried the make another profile, etc stuff from the internet. I changed my laptop to always load into safe mode using command prompt... NOW, every time it loads up, it loads into safe mode... only problem is I can't see it or do anything because the output for my tv doesn't work.
So... I bought a new wire for the laptop screen... nothing. Bought a new screen... nothing. So I assume the motherboard is damaged... The HDMI and VGA ports worked up till I set it to boot into safe mode...
Is there anything I can do? short of replacing the motherboard?
This happening right after i instal 10 on my laptop. Its about 5-10 mins after my laptop sleep then its shut down automatically.. And i believe there is nothing problem with power & sleep settings.
View 1 RepliesHow can I fix the sleep function for an HP laptop using Windows 10? After it goes into sleep mode, it won't wake-up. Have to cold boot to restart.
View 2 RepliesLaptop does not wake up from sleep when either power button, keyboard buttons or mouse touchpad are pressed. A forced reboot is always required. HDD light off, monitor stays black and battery light and fan still on.
Have had this problem for over a week since downloading and using Advanced SystemCare and Driver Booster. Once the problem occured I uninstalled them but nothing changed. Also there was a few recent windows updates at beginning of March but haven't read anywhere that they are causing similar problems. Have tried the obvious fixes but nothing seems to work.
SPECS
Asus X555LA
Windows 10 Home
Intel® HD Graphics Family
BIOS version date 14/08/14
I have a new Toshiba C55-C5241 Laptop, which came pre-loaded with Windows 10. (See Specs)
I clean installed Windows 10 last weekend. All went very well. I just started loading programs this weekend.
I started noticing the blue screen stops yesterday. These happen coming out of Sleep. I probably never would have noticed these before because I was not leaving the machine alone long enough for it to go into Sleep. So unfortunately I do not know when the behavior started - from the beginning or after some software installation.
Here are my reports: SCULLY-Sun_08_30_2015__64736_97.zip
Blue screens are mostly "Kernal Data Inpage Error" and the more serious "Critical Process Died", both I understand to be processor related.
I did not have the presence of mind to test or check any of this early on. But I do have images of the original factory installation and of the fresh, clean install (before any customization or software installs). I do not believe that I ever tried Sleep Mode on the original factory installation.
The stops happen very consistently when on battery power, less so when plugged in. For a while I thought they did not occur when plugged in - this was not the case. They seem to be more consistent when manually going into sleep, not so much when it goes into sleep from Power Settings.
All of the drivers in the clean install were the same as the drivers in the factory installation (at the time I finished). I did not turn off automatic driver update for a few days. I will check the driver list for changes later.
Software installed (in order) : Avast!, Firefox, Office 2010 (H&S), Nitro Reader, VLC (64 bit), Handy Address Book (a prog I've been using for years), Malwarebytes, CCleaner (never run), and Winamp. I am thinking of restoring the clean install image today (start over). Just to see if the behavior started then.
I have a Lenovo laptop upgraded to Windows 10. Last night I switched it off but now when I turn it on, it stucks in the startup Lenovo logo. I think that it is a driver issue but I cannot boot it in safe mode to fix it? What can I do? ( I don't mind to lose my files).
View 2 RepliesI have a desktop computer with built in WiFi and Bluetooth. I have installed the latest drivers from the MFG website (ASUS ROG Maximus VII Formula). The problem is that Airplane mode will not disable. When you click on it, it shows that you clicked on it, but immediately resets to "On" no matter what.
You will also notice that WiFi and Bluetooth are missing from the control panel.
I have made sure both devices are enabled at the BIOS level, however, due to Airplane mode being forced on, they do not even show up in the device manager (even under "show hidden").
I do not thing this is a BIOS/Driver issue; this appears to be a bug.
I just upgraded from windows 7 to 10 and when using Edge the airplane mode keeps going on. I put it to off in network and airplane mode then it goes to the internet but as soon as I do anything airplane mode comes back on keeping me from getting on internet. Cannot even get any updates
View 1 RepliesFlight mode Will not turn off ....
View 1 RepliesI am using hp 14-r029tx and windows 10 pro. The problem is, I have my wifi on. But the airplane mode status shows activated which means airplane mode is on. If my wifi is on then how come airplane mode is also on? Sometimes wifi takes too much time to load and sometimes have to reboot also. my wifi adapter is QUALCOMM Atheros qca 9565 with Bluetooth.
View 9 RepliesMost of the time we need to boot in safe mode with Networking to fix some of the issues. In some of the windows 10 computers wireless not working in safe mode with Networking
For an example my dell 5547. Has a wireless card, Intel Ac-3160 works fine in normal mode, But in safe mode it refuses to detect any Network, I am seeing similar behavior in some other models too in windows 10
Wired Networking (ethernet) is working.
My HP laptop keeps wanting to start in the airplane mode. I have reset it to the normal WIFI mode many times and it keeps going back to Airplane mode. I have contacted HP support twice. They took control of the computer and did there thing twice. Ptoblems is again occuring.
View 1 RepliesI have windows 10 pro and in my notifications and action center, airplane mode is in blue and wont let me turn it off, I'm using a desktop and not a laptop anyway to fix this or is this normal?
Also in the notification and action center, the wifi tab is greyed out.