I thought I fixed this problem, until dec. 2nd when Windows 10 did an update.
All my drivers are up to date.
I removed my Anti Virus (Panda) and re-installed it, looked like it fixed it, but the next day it stopped recognizing my wifi connection again.
We drag the Local area connection and place it in the riht upper corner of the displayWe connect via Realtek PCIe GBE Family Controller.We then right click on the icon when we want to connect to the Internet - we ENABLE.When we want to disconect - We rightclick on the Icon and DISABLE
It has worked in all our windows up to Win 7 included.But now in Win 10 that we have upgaded to (free) it does not work.If we want to disable we only see the alternative ENABLE.WE ALSO INTEND TO INSTALL WIN 19 ON OUR SECOND COMPUTER. I THINK I SKALL THIS TIME MAKE A CLEAN INSTALL.IS IT OK TO START WITH THAT AS SOON AS I GET THE WHITE FLAG AT THE BOTTOM OF THE DISPLAY.I HAVE PICKED UP AN ISO FILE AND LOADED IT DIRECT TO AN USB-MEMORY.
Windows 7 function toggle command for Enable/Disable (available on left click) now only has Disable. Is there any way this can be turned back on?
View 4 RepliesI am using a laptop with only wifi and no Ethernet so I am using a usb docking station to get an Ethernet connection. I upgraded to windows 10 and downloaded the latest driver for the docking station (specified for windows 10) but I cant get my computer to connect. when I go to my network connections I only see the wireless adapter and the Bluetooth connections. In device manager the Ethernet adapter is installed and doesn't show any issues.
View 1 RepliesI did my upgrade quite shortly ago.Basically before that upgrade I had 2 connections at the same time: Local Area Connection with Ethernet and my PPPOE connection as advised by my provider.I've been using my PPPOE connection for years to sidestep some connection issues especially with uPnP, but now my internet only works through Ethernet and when I also start in my dial-up section the PPPOE connection, Windows 10 reports the "no internet connection" problem.After using "Troubleshoot problems" it resets the required parts and reports solving "Gateway is not available" problem.
1)I've already tried to reinstall all network drivers by deleting them first with device manager and through netcfg d in command line.
2)I don't know if it works but my BitDefender reports new adapters upon starting PPPOE: Teredo Tunneling and 6to4
3)I already tried to set Local Area Connection to Home and my other connection to Public and also all other possible permutations of settings
We use a lot of VPN PPTP Connections. On most we turn off "Use default gateway on remote network". See the image below that shows where this setting is turned off.
We cannot open the properties for Internet Protocol Version 4 on VPN connections under Windows 10. This is located at Network Connections and Properties of a VPN Connection. Networking Tab, then select Internet Protocol Version 4 and click Properties. But under Win 10 the properties dialog does not open.
This has been tested on several Windows 10 systems and we have enabled Administrator and tested under that login as well.
I cannot get the WIFI status tile to show in the Notification Area.
There is no option in Settings - Notifications and actions - to turn this off and on.
With no changes to my computer, the network icon has vanished from the notification area. ...When in settings, notification/quick actions, I am unable to turn on the Network Icon (the option is greyed out)?
View 1 RepliesI have internet service from AT&T which worked great until I updated to windows 10. My pc now connects to the wifi just find, I can download updates, but I can not browse a web page. When I go into open a web page I get an error that the page can not be displayed. If I vpn to my work it works just fine then. I have reset the browser settings, created a new account on my pc and nothing has worked.
View 6 RepliesFrom a PC (called PC1 later on; running W10), I do not see other PCs or multimedia boxes connected on my local network.
Using 192.xx.yy.zz doesn't work.
From a W10 tablet PC (called PCt later on), I see other connected devices: Dune HD and PC1. From PCt I can even navigate into PC1 directories.
In PC1 Network and Sharing Center, I cannot enable file sharing.
When clicking on the button to activate it and then saving the changes, I notice, when reopening the parameters window, that it hasn't been changed. It remains disabled.
The "computer browser" Service will not start because of dependencies (1068 error).
The "workstation" Service will not start because of dependencies (1068 error). This service is required to "computer browser"
So, this last update seems to have killed the start menu again. After reboot, it might work, it might not, but not too long there-after it just quits working all-together if it was working before. Same with search and Volume toggle. Dang! Mines an AMD machine which is perhaps a factor.
View 9 RepliesI am having a problem with the windows 10 upgrade service.
It keeps telling me my display adaptor is a Matrox adaptor but the actual adaptor is an intel motherboard adaptor.
No Matrox adaptor has ever been fitted (I have had the computer for 15 years (various new motherboards etc) and never have used a Matrox adaptor.
It wont let me upgrade as it says the adaptor is not supported.
My partner uninstalled AVG and then found that the wifi wasn't working. Tried an ethernet cable, no good either. Then tried to roll back in W10, still no luck.
It seems that the wifi adapters have disappeared and it may be a common problem with W10. I can download a fix to a memory stick, but what will be needed to get back online.
I'm having a problem with Windows 10. I just created a local account then poof, taskbar & start menu is not working, search button won't open, I can't see the date and time, and no access at the PC settings. Is it because I'm not connected in the internet when I created a local account?
View 5 RepliesI have so far avoided using Windows ID login (except on a sacrificial VM I use for Windows Insider(*)) as I can no longer access the SMB shares that I have set up.
Is there any way for the two to co-exist? I can't get my head round using SMB shares and NTFS permissions with Windows Live ID - is it possible in any way at all, or have MS (as usual) given us a "new spiffy improved thing" which is actually none of the above?
Why can't I use a local login AND have have access to the Insider programme?
After recent Windows 10 Update, my wireless connection no longer works. I've done some troubleshooting and I have ruled out my ISP, cable modem, and router, leaving the issue to be something within the computer (Dell laptop - Inspiron 7537).The wired connection works fineWhen I run Windows Network Diagnosis, it tells me that the Windows Wireless Service is not running (see attached pdf report).
When I try to manually start the WLANSVC service, i get an error message that says "Windows could not start the WLAN AutoConfig service on Local Computer Error 193:0xc1" (see attached)When I try to manually start the WLANSVC service from the command prompt (as Admin) I get a slightly different message that says "The WLAN AutoConfig service is starting. The WLAN AutoConfig service could not be started. A system error has occurred. System error 193 has occurred. *** is not a valid Win32 application." (see attached)I've downloaded the latest Intell PROset Wireless drivers from Dell (V18.20.0.9) for the Wireless-N 7260 wireless network adapter and have uninstalled and reinstalled the drivers.
I have Windows 10 laptop hooked up to an ethernet connection which has been working well for the past 6 months. On 2/18/16 it stopped working. I traced the problem to the Qualcomm Atheros network Controller/ Killer E2200 Gigabit Ethernet Controller: Internet status > IPv4 Connectivity: No network connection IPv6 Connectivity: No network connection Clicked: diagnose --> System checked & reset, with IPv4 Connectivity and internet access restored.
This resolved the problem until 3/4, following a Windows 10 update. The above solution no longer works. Clicking 'Disable this net work device' and then enabling it again restores IPv4 Connectivity and internet access for a limited time but loading a new site or page is slower than it was prior to the emergence of this problem on 2/18, and then the connection is again lost after maybe 10 to 20 minutes.
Since I downloaded windows 10 I keep getting no internet connection before I log on. I called my internet provider and she had me checking a lot of things before she had me to type Device Manager in my search bar and look under networking to see if anything was off. Both my Ralink RT 3290 802.11 bgn Wifi Adapter and my Realtek PCle GBE Famili Controller had a yellow triangle with an exclamation mark in the middle beside them. She had me to right click on them to disable them, then go back and right click again to enable them. My internet connection came back but it keeps losing connection about once a week. I didn't have this problem before the download. This is a HP Desktop and I am connected wireless.
View 3 RepliesCan't connect to broadband connection... The Modem (or other connecting devices) has reported an error
While I troubleshooted in network and sharing center I got:
There might be a problem with the driver for the Ethernet adapter
And
There might be a problem with the driver for the wi-fi adaptor
I am using Windows 10...
My PC would be connected to WiFi, but I wouldn't be able to go on any site. I restarted my PC and the damn thing locked up on the HP logo screen! So I had to hold the power button to turn of my laptop.
View 1 RepliesI upgraded my ageing Dell Inspiron 530 desktop PC this morning from Win7 Ultimate to Win10 Pro. The PC is connected to the router via ethernet cable.All seems fine in terms of the OS, but I have no internet access. I know the router's OK as my other devices are fine.When I run the troubleshooter it flags up "There may be a problem with the driver for the Local Area Adapter".Digging further, it seems the issue is "Windows couldn't automatically bind the IP protocol stack to the network adapter"
Looking at Services, I found the Wired AutoConfig and WLAN AutoConfig services weren't running were set to Manual. I changed these to Automatic and rebooted, but still no joy.The network adapter is an Intel 82652V-2 10/100 and Device Manager says it's working normally and the driver is up to date.
I updated to Windows 10 from Windows 8.1
Connection to Internet through Wi-Fi is not happening after that though it is happening via LAN Cable.
Whenever I try to connect through Wi-Fi it gets stuck showing Limited Connectivity and No Internet Access.
I went through some threads and found that it can be solved by disabling "Block Internet Connection Sharing" setting in Bit Defender but I am not using Bit Defender.
I am using Windows Defender instead and am not able to find such setting in that.
disconnect 1-2 min say "login another user"
i have win 10 pro im change remote resvices session time limit and another method but not solved...
So, my wireless router went out on me yesterday during a thunderstorm, which I replaced today. My desktop will not connect to the wireless network at all. I have it connected right now, through my cellphone's hot spot. Also, I can connect my phone to the wireless network as well as a different desktop and get internet access, which suggests something wrong with this desktop, I would imagine.
Network Adapters:
ASUS PCE-N10 11n Wireless LAN PCI-E Card
Broadcom NetLink (TM) Gigabit Ethernet
I'm sure some additional information may be needed but I'm not sure what you would need, so I'll gladly provide what I can if needed.
I've been running Windows 10 on my PC for a few months now. I upgraded from Windows 7 and absolutely love it! However, I am having an issue. When I use my PC on a normal basis, Everything is good. Internet connection is perfectly stable, no problems. But ALWAYS if I restart my pc, and SOMETIMES when I put it to sleep, when my computer turns back on, my internet connection can't be detected. I have to unplug it for about 5-10 seconds and do a full reboot in order for my internet connection to be detected by my pc. None of my other devices have this issue. I have an xbox one, Smart tv, my phone, laptops, etc. connected and none of them have the same issue.
View 9 RepliesAfter spending many anxious days trying to elude a hacker, I Reset my desktop PC yesterday to get a clean Windows 10 install. The legacy network connection I know is routed through the Hacker who is using Teredo tunneling software. I am trying to set up a new and secure VPN network connection to the Internet. But the PC keeps whirring without any visible connection progress. The Network Connection dialog box tells me that Windows 10 is trying to create a WAN Miniport (IKEv2). The legacy connection is on Ethernet with a Realtek PCIe GBE Family Controller, which I imported to the new Windows install.I am worried that I don't have the correct adapter settings and that a new connection can not be created while the legacy one still exists.
View 8 Replies