Networking :: Massive Network Lag When Downloads From Any Source
Oct 26, 2015
I am having an issue with network lag. When doing any downloads from anywhere or any source. Firefox, palemoon. Display fusion wallpaper, or any downloads that happen online from any source.
Not sure what is causing it.
When checking resource monitor it shows network going up considerably , may end up trying a different network monitor that I can log.
my network itself is fine and fast, and contacted network provider and all shows good.
View 1 Replies
Similar Messages:
Dec 9, 2015
I have a PC with Windows 10 Build 10586, upgraded from 8.1.
WiFi downloads are very slow on it for some reason. SpeedTest.net shows 15 MBPS, but while download a simple 5 MB image file via Chrome takes 45 minutes. Max download speed is 15 KB/s.
But when I keep softwares like AutoDesk Revit for download through their own downloaders, it gets 1 MB/s download speed.
So why is downloading via Chrome or other browsers and some other software so slow?
View 9 Replies
Oct 1, 2015
How do I find my network DVR in Network and sharing center?
View 4 Replies
Sep 10, 2015
Edge is using over 6GB of RAM ... is this normal?I have 24GB of RAM so its not a big deal but it is curious...
View 1 Replies
Oct 14, 2015
I encountered a very strange problem last night. A bit of backstory first:
This is my second 'reset' of Windows 10. My first attempt to update into W10 went smoothly for about 1.5 months, then I got a black screen that looped continuously and would not get past startup. After trying many solutions, I figured the installation was corrupted, and started anew.
Everything on this incarnation of W10 has been fine, for about a month. However, last night, something VERY STRANGE occurred. As I went to switch the video I was watching in VLC, I double-clicked a video to load into VLC. VLC changed the video, but my PC lagged for about 20 seconds (unusual for my PC to lag at all). When it stopped, I went to look at my desktop, which is on my first monitor (second monitor has video playing on it), which was previously covered by full-screen explorer to look for the video. I was extremely surprised when I noticed that every. single. icon. was gone from my desktop, except the folder that housed the video I picked to watch.
The only things left were the Garbage Bin and that folder. I figured they went into the Garbage Bin on mistake. Checked. Nothing.
Long story short, after I went into 'My PC' to look in other folders, I was utterly baffled to notice that 400 GBs of data had been deleted from my computer. Yes, everything that was on my desktop (massive amount of videos, games, etc) were gone. Simply.. deleted.
After looking EVERYWHERE for the files, included my Program Files, Windows.Old, etc, and realizing that the items had not only been deleted, but REMOVED FROM PROGRAM FILES in many instances, I did a System Restore. Unfortunately, this did nothing except restore the FOLDERS, as the files themselves are still gone, and the 400 GBs is still missing.
View 8 Replies
Sep 5, 2015
Just upgraded to Win 10 and kept losing internet access. After troubleshooting my home network is now named "Network 2". How do I change the name to "Network 1 "?
View 3 Replies
Dec 4, 2015
Today, while having lunch at my favorite restaurant, I tried to connect to their WiFi network as I usually do. I got the following message:Checking network resources.And then, after a few seconds: Can't connect to this network. My obvious question is, why not? To begin with, was it something wrong with my computer, or something wrong with their network?
For example:
DHCP server did not respond
DHCP server did not issue an IP addressStored password incorrect; enter new password: _________
WiFi adapter card not respondingInsufficient virtual memory
But no, none of that useful information was offered. How am I supposed to fix the problem?
View 2 Replies
Mar 5, 2016
I have a desktop PC running Win7 64Bit Ent. It's not actually in use, so nothing is connected. I also have a laptop running Win10 64Bit which I'm using to type this post. I have some audio files on my desktop that I'd like to pull off of there, and put them on my laptop, and then maybe on a cloud. My 1st question: Is it possible to simply use a USB cable between 2 USB 3 ports if I simply power up the desktop with the USB cable connected? Does the USB protocol provide for me to see those HDD's on the desktop via the laptop? I'm quite limited for physical space, and I don't need the desktop to be running permanently, I just need to get these files off of it. If that's NOT a solution, what is the next easiest method?
View 6 Replies
Dec 16, 2015
I have forgotten my network security key, all of the info I find points me to connections, wireless properties, etc..... This does not match my updated Windows 10. What is the procedures for the latest updated Windows 10?
View 1 Replies
Jan 4, 2016
I have two Win 7 computers on my wired network and 6 Win XP computers on this same network. This main computer was Win 7 and just upgraded to Win 10 in November. For a year this network has worked just fine, plug and play basically when I set it up, now after Christmas shutdown (2 weeks), I can't see any of the computers on this network. The only thing I can see is the media drive on a computer called 6Head2. All I really do is transfer files from this main computer out to those 8 other computers.
What is wrong with my computer? Network discover, file sharing all checked, network location was changed from Public to Private today by me. But it did work last year, even with the network location being public.
View 2 Replies
Jan 10, 2016
I have a home network that includes-Two Windows 7 PCsTwo Linux machinesA Brother MFC7820N networked multifunction printer..All the above are on wired connections. Then there's an 802.11n wireless link for laptops and media devices.I'm just setting up a new machine that's running Windows 10 Home, using the wireless network. I was annoyed to find that Brother don't have a full-function Windows 10 driver for the 7820N that supports scanning, but the Brother site says the built-in drivers in Win 10 should work for basic printing.
Problem: I successfully added the printer device to Windows 10 (at the 3rd attempt) using the "manual advanced" method. The printer has an entry in the hosts file, and was added by host name.The printer fails to print, with a "not responding" type message. The driver also can't pick up the status info from the printer.
What's really weird is-I can ping the printer from the W10 box (and the other machines) by either IP address or hostname.However, this printer has a web interface. I can access this from any of the Windows 7 machines, but the Windows 10 machine says "web site failed to respond" or somesuch. This happens with any of: Edge, IE11, or Chrome browsers.I can't even make a manual connection (telnet to port 80) from the Win 10 machine (timeout).The Windows 10 machine CAN access all the other devices on the home network, including the web servers (Apache) on both the Linux boxes.
This looks like the web access to that particular address is being blocked somehow. I have tried disabling my AntiVirus package (Kaspersky), but that makes no difference. Is Win10 perhaps detecting an "old" web server on the printer and refusing to talk to it? (and why would that prevent printing using lpd?)
View 9 Replies
Nov 8, 2015
Nothing is working to get my computer to connect to the internet again. It was working fine yesterday so don't know what was changed. All other devices can connect. Using my laptop to search.
IPv4 is connected but I can't get IPv6 to connect at all. No error messages anywhere.
Fixed. Updated drivers worked. Just had to restart a couple times for it to work.
View 9 Replies
Feb 10, 2016
I have a USB connected printer (HP F4100) on my Windows 10 desktop. Everything appear to be working as I have no issue accessing the printer remotely on my Windows 7 laptop. The issue is trying to access from my Windows 10 laptop. I can see the shared workgroup in explorer, but no sign of the shared printer.
How to troubleshoot this? I've gone through the basics such as disabling Windows Firewall, but no luck. Everything looks fine in the advanced sharing settings and as mentioned, things are fine from my Windows 7 machine.
My impression of Windows 10 is not great so far. This along with my machine rebooting due to a security patch even though I had "Notify to schedule restart" selected. The whole mandatory security updates kind of irks me. I kind of get it, but as a power user, I should have the choice. Especially with the amount of sketchy patches that MS has released over the years.
View 3 Replies
Mar 5, 2016
I have Windows 10 laptop hooked up to an ethernet connection which has been working well for the past 6 months. On 2/18/16 it stopped working. I traced the problem to the Qualcomm Atheros network Controller/ Killer E2200 Gigabit Ethernet Controller: Internet status > IPv4 Connectivity: No network connection IPv6 Connectivity: No network connection Clicked: diagnose --> System checked & reset, with IPv4 Connectivity and internet access restored.
This resolved the problem until 3/4, following a Windows 10 update. The above solution no longer works. Clicking 'Disable this net work device' and then enabling it again restores IPv4 Connectivity and internet access for a limited time but loading a new site or page is slower than it was prior to the emergence of this problem on 2/18, and then the connection is again lost after maybe 10 to 20 minutes.
View 1 Replies
Feb 10, 2016
I suffer total loss of network connectivity after a computer crash. I am on win 10 x64
Here is my ipconfig /all:
C:WINDOWSsystem32>ipconfig /all
Windows IP Configuration
Host Name . . . . . . . . . . . . : Xello
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
[Code] .....
Windows troubleshooter reports that "One or more network protocols are missing on this computer".
Some other info: I am unable to connect to 192.168.0.1, which is my router's home page. I can load this page on my laptop if i connect my laptop with ethernet, so the router is fine.
View 9 Replies
Dec 6, 2015
Noted immediately after 1511 total system update, yet may have been inherited from an earlier build...
All is working well, yet Network Troubleshooter reports "one or more network protocols is missing."
Various posted remedies have been verified or implemented, to no avail.
Win 7, on the same machine, reports no errors.
View 9 Replies
Jan 6, 2016
I'm using static IP for Network #1 which is 192.168.1.110
But when I try joining another network let's say network #2 with a router address like 192.168.43.1 i have to change network settings and use another static IP 192.168.43.10
Can't i just ask windows to use static IP 192.168.1.110 when i try to connect to network #1 and 192.168.43.10 when I connect to network #2 without having to manually configure it every time ?
I really have to use static IPs when connecting to those two particular networks...
View 1 Replies
Jan 1, 2016
What would cause my computer to have one or more network protocols missing and how can I fix it?
Below is the screenshot of the troubleshooting report.
View 9 Replies
Dec 9, 2015
I started my PC in a new premises with a Wireless modem, I have two other PC's connected.
When I started the PC it saw the wireless network and the option came up to connect and there was a tick in the "Connect Automatically" box.
I selected OK but got a message "unable to connect".
I did not get the opportunity to enter the Password/Key.
Now the PC will not connect to the Network nor will and Diagnose and repair fix anything.
BTW the Ethernet adaptor has been disabled.
The laptop I am sending this from is next to the PC so the wireless signal is okay.
View 4 Replies
Oct 2, 2015
How to send a message over the network to a pc? On the same network ofc, I tried this on my NUC "Net send Strix_V3 hello" and it didn`t show up anything on my laptop. I don`t want any third party software.
And, I`ve set up my NUC as a file server with a 1TB external hard drive, and I have shared the two partitions over the network, but when my stepdad is gonna access some of his files he get a message that the owner of the server needs to give him rights or something. How can I make my stepdad have the exact same rights as I have?
View 3 Replies
Feb 10, 2016
I am facing a problem that my PC running Windows 10 cant see other PC's/Devices on my network.
Idk. if it have something to do with i cant make/join a homegroup.
I was told to remove a file in "C:WindowsServiceProfilesLocalServiceAppDataRoamingPeerNetworking" but the file was not there.
View 1 Replies
Feb 10, 2016
Reader's Digest version: Both of us are on the same network through an Asus RT-AC56R router. Both are running Windows 10, fully patched, checked w/ Belarc. My network is visible to her system and public files accessible. Hers, and the usb printer on her PC are NOT visible at all to my side of the network. It's as though her system isn't on the network.
Every setting in network sharing matches. I've checked several times to be certain both PCs have the exact same Advanced Network Sharing settings.
I am also running Linux Mint 64-bit as a dual boot. Needless to say, networking using Linux is PERFECT.
View 1 Replies
Feb 10, 2016
I have a Windows 10 Pro 64bit box as my NAS
Storage Spaces, ReFS, 2 drives mirrored
HomeGroup
HDD sleep on idle
Hibernate/Sleep disabled
My problem is when I typically save or open a file with the Windows file dialog on any Windows 10 machine, and I try to go to that machine through the network path //MyNAS/MyFiles, it initially gives me a cannot connect or find error.Is this due to the dialog not waking up the drives on the NAS? Something is obviously asleep here, and I usually end up opening Total Commander or Windows Explorer to "wake up" the connection and then everything works. I don't mind waiting, but I'd like the dialogs to hold tight until it connects, not give me not found or cannot connect.
View 1 Replies
Nov 5, 2015
i've been with this problem for months and i have tried multiple solutions offered by others on the internet, yet i'll give it another try here.
i'm using a powerline adapter directly plugged into the wall on my desktop. And it has worked excellent before, but suddenly someday it did not get a valid IP adress anymore for my pc, i have tried giving it an ip adress manually but without succes. i also tried updating the driver but there was no update.
my network and sharing center displays unidentified network and windows problem solver detects the problem 'network name' does not have a valid ip configuration.
View 9 Replies
Aug 10, 2015
Why the specified network password is not correct? My password is CORRECT!! It's a good password and the only password used on these computers. When I try to network from my win 10 laptop to win 10 desktop I get this error message? I went to Control Panel Networking and troubleshooted and it said I didn't have permission to network. Yet I had no trouble when I was working the same computers in win 8.1 and win 7. There has been no change in networking procedure in win 10 which worked well in win 7 and 8.1.
View 3 Replies
Nov 15, 2015
I can reach them by the quick access shortcuts I added before the upgrade but they don't show up in WE Network.
Rebooting my WD MyCloud solves the problem until next time I reboot my Win10 c.
View 6 Replies
