Networking :: Mysterious Folders In Network
Nov 14, 2015I have 2 new folders in the network in File explorer, Documents 2 and music 2. I can't find these folders in the C drive view. ?
View 5 Replies
Similar Messages:
Networking :: Network Setup - Sharing Public Folders
Dec 29, 2015Trying to set up a network for the first time. My intention was to share public folders but when I right click on my user folders (e.g. PCUsersDaveDocuments they are shown as "Shared" and clicking on "Stop sharing" doesn't seem to do anything. Am I missing something.
View 3 RepliesNetworking :: Find Network DVR In Network And Sharing Center?
Oct 1, 2015How do I find my network DVR in Network and sharing center?
View 4 RepliesNetworking :: How To Rename Network 2 To Network 1
Sep 5, 2015Just upgraded to Win 10 and kept losing internet access. After troubleshooting my home network is now named "Network 2". How do I change the name to "Network 1 "?
View 3 RepliesCan't Write To Folders From Network After Upgrading
Sep 15, 2015I upgraded a workstation to Win 10 Pro. The system, System X, has two admin users, A and B. A is logged on to System X. Volume C is shared from the root on System X, and all admins on the system have permissions to Share C with full control. B is logged on to another system, System Y (Win 8.1). B can access (read) almost all folders on System X from System Y, but cannot write to the folders as he did in the past. I included a screenshot of the sharing options, which are the same for all networks, though Network Discovery is off.
View 9 RepliesNetworking :: Synchronize Between Two Folders
Nov 8, 2015Am sorting out hundreds of photos for archiving, need to add them to final folder and delete from the source folder...I have a complete backup on another partition, which I have to copy to at the end of each session to keep them both up to date.....I hear there is an MS program called synctoy not sure how stable this is for W10 or if there is a better alternative...
View 6 RepliesNetworking :: Changes User Rights On Folders?
Sep 27, 2015I am running a multiboot W7-pro and W10-pro with several harddisks build in the computer to discover that after W10 used a disk W7 wants to check it to find no errors. Beside that I am not allowed to delete some folders I created in W7 after using them in W10 and they are set to free for use for everybody.
W7 now askes me to get permission from that everybody. I think they mean the W10-everybody. Understand that security is important nowadays but this is becoming a disaster! Also discovered that running the backupapplication Cobian (that always did a perfect job in W7) now is not allowd to acces lots of files in W7 anymore after W10 did ?????something??????.
Another example: I have two SATA backup 1 Tb Disks I switch every few weeks. W10 refused to see the new one after the first switch. Had to go deep into settings to carefully trying to open its content again as W10 told me zero bytes were used. In the end the 900 Gb data was there again but I have forgotten all the steps needed to fix it.
My best guess is that beside Microsoft is messing around with accounts and rights to get full control of your computer. They do not want you to be in control yourself anymore and you have to (must) only use W10 in the future. I am starting to feel a big fool that upgraded to W10 as I am loosing control over my PC's and home-network day by day!!!!
Networking :: Can't Connect To Network
Dec 4, 2015Today, while having lunch at my favorite restaurant, I tried to connect to their WiFi network as I usually do. I got the following message:Checking network resources.And then, after a few seconds: Can't connect to this network. My obvious question is, why not? To begin with, was it something wrong with my computer, or something wrong with their network?
For example:
DHCP server did not respond
DHCP server did not issue an IP addressStored password incorrect; enter new password: _________
WiFi adapter card not respondingInsufficient virtual memory
But no, none of that useful information was offered. How am I supposed to fix the problem?
Networking :: Connecting 2 PCs Without Network
Mar 5, 2016I have a desktop PC running Win7 64Bit Ent. It's not actually in use, so nothing is connected. I also have a laptop running Win10 64Bit which I'm using to type this post. I have some audio files on my desktop that I'd like to pull off of there, and put them on my laptop, and then maybe on a cloud. My 1st question: Is it possible to simply use a USB cable between 2 USB 3 ports if I simply power up the desktop with the USB cable connected? Does the USB protocol provide for me to see those HDD's on the desktop via the laptop? I'm quite limited for physical space, and I don't need the desktop to be running permanently, I just need to get these files off of it. If that's NOT a solution, what is the next easiest method?
View 6 RepliesNetworking :: Network Security Key
Dec 16, 2015I have forgotten my network security key, all of the info I find points me to connections, wireless properties, etc..... This does not match my updated Windows 10. What is the procedures for the latest updated Windows 10?
View 1 RepliesNetworking :: Can't See Other Computers On Network
Jan 4, 2016I have two Win 7 computers on my wired network and 6 Win XP computers on this same network. This main computer was Win 7 and just upgraded to Win 10 in November. For a year this network has worked just fine, plug and play basically when I set it up, now after Christmas shutdown (2 weeks), I can't see any of the computers on this network. The only thing I can see is the media drive on a computer called 6Head2. All I really do is transfer files from this main computer out to those 8 other computers.
What is wrong with my computer? Network discover, file sharing all checked, network location was changed from Public to Private today by me. But it did work last year, even with the network location being public.
Networking :: Can't Access Network
Jan 10, 2016I have a home network that includes-Two Windows 7 PCsTwo Linux machinesA Brother MFC7820N networked multifunction printer..All the above are on wired connections. Then there's an 802.11n wireless link for laptops and media devices.I'm just setting up a new machine that's running Windows 10 Home, using the wireless network. I was annoyed to find that Brother don't have a full-function Windows 10 driver for the 7820N that supports scanning, but the Brother site says the built-in drivers in Win 10 should work for basic printing.
Problem: I successfully added the printer device to Windows 10 (at the 3rd attempt) using the "manual advanced" method. The printer has an entry in the hosts file, and was added by host name.The printer fails to print, with a "not responding" type message. The driver also can't pick up the status info from the printer.
What's really weird is-I can ping the printer from the W10 box (and the other machines) by either IP address or hostname.However, this printer has a web interface. I can access this from any of the Windows 7 machines, but the Windows 10 machine says "web site failed to respond" or somesuch. This happens with any of: Edge, IE11, or Chrome browsers.I can't even make a manual connection (telnet to port 80) from the Win 10 machine (timeout).The Windows 10 machine CAN access all the other devices on the home network, including the web servers (Apache) on both the Linux boxes.
This looks like the web access to that particular address is being blocked somehow. I have tried disabling my AntiVirus package (Kaspersky), but that makes no difference. Is Win10 perhaps detecting an "old" web server on the printer and refusing to talk to it? (and why would that prevent printing using lpd?)
Networking :: No Network Access
Nov 8, 2015Nothing is working to get my computer to connect to the internet again. It was working fine yesterday so don't know what was changed. All other devices can connect. Using my laptop to search.
IPv4 is connected but I can't get IPv6 to connect at all. No error messages anywhere.
Fixed. Updated drivers worked. Just had to restart a couple times for it to work.
Networking :: Can't See Network Printer
Feb 10, 2016I have a USB connected printer (HP F4100) on my Windows 10 desktop. Everything appear to be working as I have no issue accessing the printer remotely on my Windows 7 laptop. The issue is trying to access from my Windows 10 laptop. I can see the shared workgroup in explorer, but no sign of the shared printer.
How to troubleshoot this? I've gone through the basics such as disabling Windows Firewall, but no luck. Everything looks fine in the advanced sharing settings and as mentioned, things are fine from my Windows 7 machine.
My impression of Windows 10 is not great so far. This along with my machine rebooting due to a security patch even though I had "Notify to schedule restart" selected. The whole mandatory security updates kind of irks me. I kind of get it, but as a power user, I should have the choice. Especially with the amount of sketchy patches that MS has released over the years.
Networking :: No Network Connection
Mar 5, 2016I have Windows 10 laptop hooked up to an ethernet connection which has been working well for the past 6 months. On 2/18/16 it stopped working. I traced the problem to the Qualcomm Atheros network Controller/ Killer E2200 Gigabit Ethernet Controller: Internet status > IPv4 Connectivity: No network connection IPv6 Connectivity: No network connection Clicked: diagnose --> System checked & reset, with IPv4 Connectivity and internet access restored.
This resolved the problem until 3/4, following a Windows 10 update. The above solution no longer works. Clicking 'Disable this net work device' and then enabling it again restores IPv4 Connectivity and internet access for a limited time but loading a new site or page is slower than it was prior to the emergence of this problem on 2/18, and then the connection is again lost after maybe 10 to 20 minutes.
Networking :: No Network Connectivity
Feb 10, 2016I suffer total loss of network connectivity after a computer crash. I am on win 10 x64
Here is my ipconfig /all:
C:WINDOWSsystem32>ipconfig /all
Windows IP Configuration
Host Name . . . . . . . . . . . . : Xello
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
[Code] .....
Windows troubleshooter reports that "One or more network protocols are missing on this computer".
Some other info: I am unable to connect to 192.168.0.1, which is my router's home page. I can load this page on my laptop if i connect my laptop with ethernet, so the router is fine.
Networking :: Media Server Not Showing Folders
Dec 22, 2015When I'm accessing my media library on the computer with my phone it does show all movies/songs in the same folder. I have chosen to share different folders like, E:movies E:kids E:adults C:user*videos. all those folders are shown as only one folder on the device i'm accessing my library with. Sub-folders within the paths does show.
In Windows 7 the folders did not batch up as only one folder, each path was shown separately.
Networking :: Shared Folders Intermittent Disconnect
Jan 12, 2016My question is in regards to shared folders. I run a desktop and laptop connected by ethernet, through a router. Both machines run Windows 10 Pro. Both machines have static IP addresses setup in the router. I do not use a software firewall and both computers are allowed onto the network.
I share folders on both machines in order to run client software on the laptop which connects to the flight simulator on the desktop. All of the shared folders have full control setup for everyone in both security settings and the shared folders tab.
There are HomeGroups set up on both machines with the correct information.
The problem (finally you say) is that occasionally, one computer cannot open the shared folders on the other over the network. This doesn't happen all the time, nor is the solution consistent. Sometimes closing and reopening the network folder fixes it. Sometimes just waiting does it. Other times, I have to reboot the computer(s). This creates issues with my client software trying to connect to the desktop. The error is: 0x80070035 Windows cannot find.....(to paraphrase).
I should point out that the other machine shows up in the network folder. I just can't access it when this happens. This happens mainly on the laptop attempting to connect to the desktop, although once in awhile the desktop cannot find the laptop.
I have checked and rechecked settings, deleted and rebult the HomeGroup, ensured password protected sharing is off, network discovery is on; amongst other things. I read about changing the shared computer name to its IP address. I also read somewhere about changing a number of registry entries that would force a change in Windows network behaviour.
Networking :: Shared Folders Not Visible On Other Devices
Feb 23, 2016I am running Windows 10 and trying to set up a network so that I can transfer photos from an android phone onto my laptop hard drive for back up. I've been using an app to do this and it has worked in the past brilliantly (called "Sweet Home" if interested). Unfortunately since upgrading to Windows 10 and changing my phone it doesn't work. I have also been trying to test the network using ES File Explorer. I have tried setting this up on another laptop running Windows 8 and it works no problem, so the issue must be with my settings.
I have set up a home group, made sure everything is shared where it should be and permissions set so that the network should be visible to everyone, but the android device can't see the network at all. For reference when setting up the network I followed the step by step in the link below on the Windows 8 laptop and it worked.
[URL] ..
One strange point that I think might be related on the Windows 10 laptop, is when I get to Step 2 (of the link above) under "How to enable sharing on Windows?" the "Share" button is greyed out, even when the folder is not shared. I have to share it by clicking the "Advanced Sharing" button instead.
Networking :: Network Protocols Missing
Dec 6, 2015Noted immediately after 1511 total system update, yet may have been inherited from an earlier build...
All is working well, yet Network Troubleshooter reports "one or more network protocols is missing."
Various posted remedies have been verified or implemented, to no avail.
Win 7, on the same machine, reports no errors.
Networking :: Possible To Assign Static IP For Each Network?
Jan 6, 2016I'm using static IP for Network #1 which is 192.168.1.110
But when I try joining another network let's say network #2 with a router address like 192.168.43.1 i have to change network settings and use another static IP 192.168.43.10
Can't i just ask windows to use static IP 192.168.1.110 when i try to connect to network #1 and 192.168.43.10 when I connect to network #2 without having to manually configure it every time ?
I really have to use static IPs when connecting to those two particular networks...
Networking :: One Or More Network Protocols Missing
Jan 1, 2016What would cause my computer to have one or more network protocols missing and how can I fix it?
Below is the screenshot of the troubleshooting report.
Networking :: Cannot Connect To The Wireless Network
Dec 9, 2015I started my PC in a new premises with a Wireless modem, I have two other PC's connected.
When I started the PC it saw the wireless network and the option came up to connect and there was a tick in the "Connect Automatically" box.
I selected OK but got a message "unable to connect".
I did not get the opportunity to enter the Password/Key.
Now the PC will not connect to the Network nor will and Diagnose and repair fix anything.
BTW the Ethernet adaptor has been disabled.
The laptop I am sending this from is next to the PC so the wireless signal is okay.
Networking :: Sending Message To Other PC Over Network
Oct 2, 2015How to send a message over the network to a pc? On the same network ofc, I tried this on my NUC "Net send Strix_V3 hello" and it didn`t show up anything on my laptop. I don`t want any third party software.
And, I`ve set up my NUC as a file server with a 1TB external hard drive, and I have shared the two partitions over the network, but when my stepdad is gonna access some of his files he get a message that the owner of the server needs to give him rights or something. How can I make my stepdad have the exact same rights as I have?
Networking :: Network Discovery Not Working?
Feb 10, 2016I am facing a problem that my PC running Windows 10 cant see other PC's/Devices on my network.
Idk. if it have something to do with i cant make/join a homegroup.
I was told to remove a file in "C:WindowsServiceProfilesLocalServiceAppDataRoamingPeerNetworking" but the file was not there.
Networking :: Network Works One Way Only (both PCs Not Visible)
Feb 10, 2016Reader's Digest version: Both of us are on the same network through an Asus RT-AC56R router. Both are running Windows 10, fully patched, checked w/ Belarc. My network is visible to her system and public files accessible. Hers, and the usb printer on her PC are NOT visible at all to my side of the network. It's as though her system isn't on the network.
Every setting in network sharing matches. I've checked several times to be certain both PCs have the exact same Advanced Network Sharing settings.
I am also running Linux Mint 64-bit as a dual boot. Needless to say, networking using Linux is PERFECT.