I am facing a problem that my PC running Windows 10 cant see other PC's/Devices on my network.
Idk. if it have something to do with i cant make/join a homegroup.
I was told to remove a file in "C:WindowsServiceProfilesLocalServiceAppDataRoamingPeerNetworking" but the file was not there.
I know this problem has been discussed with many variants but not quite the same as I'm experiencing, so I'm starting a new thread.
I did a clean install of Windows 10 pro 64 bit, and everything was running perfectly, that is until two days ago when the computers on the network simply disappeared. I had done nothing with changes or new software or anything of that sort.
I checked network discovery and it was on, but the only computer showing was the home computer. I have tried turning discovery off then rebooting and then back on again and rebooting. In all cases the network drives are accessible. I have manually entered the computer name in the address bar of File Explorer eg "//COMPUTER2" and then I can go and enter the other computers manually. Everything will stay there until I close down File Explorer and then they disappear again only shown the home computer.
I just installed (yesterday) the latest W10 update that installed Version 1511 (OS Build 10586.3) and my home network consisting of five W10 PC's has been "destroyed." I do not use Homegroup. Instead, I have always set up all the drives/folders as shared on all the computers. That worked just fine until now! For some reason only one of the PC's is detected by the other PC's on the network. However, all the drives that I had previously Mapped are OK. Is there some new magic setting that I have to change to get network discovery working again ...or... is MSFT forcing me to use Homegroup?
A little more information to add to my confusion. I was wrong above - two of the PC's are shown in the Network on all the PC's. One of the five PC's, which I use as a home server, runs 24-7. For some reason it has all the other PC's showing under Network and can access all the stuff on all the PC's!! I know it used to take Windows a few minutes to find all the PC's on the Network but... all the other PC's have been running for many hours and nothing changes.
i have a killer e2400 network adaptor over a wired connection on my msi motherboard. Unfortunately, out of the blue it has stopped working. I constantly get the error message "Ethernet doesn't have a valid IP configuration." I have tried a number of things such as stopping and restarting the services in computer management. Nothing appears to work. I know my router works as I'm using it now on another computer.
View 2 RepliesI recently set up a Homegroup on a Win10 laptop so I can see another PC on the network. That PC is running Win8.1, and I would like to use it for file backup. The devices are visible on both ends of the network and have connectivity, but when I choose to use the File Backup function from the laptop, nothing transfers and eventually I have to restart because of no response from the system. Also, my browser will stop working. I have added the PC as a network location and specified the location for backup, but is has locked up twice now. Could this be a routing issue? I previously ran the auto backup feature to a memory card, but need more space.
View 2 RepliesI have changed my router. Is a 'FritzBox fon WLAN 7170'. First i connected, it was all good, i tried to connect to browser and it was good. Then i tried to connect Steam. "Could not connect to the steam network, either check your connection and click 'Retry' or start Steam in offline mode."I looked up for the probem, tried to:
- start the shortcut with -tcp
- turn the firewall off
- remove Steam from processes
- uninstall Steam and install it again.
- delete all files from Steam (without steamapps folder)
I tried other games online, they don't work either..I saw that video - Fritz!Box Firewall Port forwarding - YouTube (is 3:22 minutes long, if you want to watch it)I saw on the internet i can connect to the router settings with WIFI connection and i can't connect (CMD - ipconfig - Default Gateway in the browser).
Do i need to port forwoard all of them ?Is the Dynamic DNS the case?Why is the IPV6 with "No network access"? -Is the IPV6 important for online games?Do i need to set IPV6 ON?
My windows 2003 server stopped working in normal mode, but working in "safe mode with networking" and giving reply from all peers, and reaching all remote locations. in Normal mode not even ping to peer and giving error "destination host unreachable". tried with new NIC. IP conflict coming when assigning used IP address, if giving a new IP address not even request going to peer showing the same error as "destination host un reachble".
View 1 RepliesI upgraded to windows 10 from 8.1, ever since then, my Huawei 173 stopped working. The led light flashes, yet the network signal is not showing, the display hangs and several other issue.
View 1 RepliesProduct Name: Hp Omen 15
Operating System: Microsoft Windows 10 (64-bit)
Wifi card: Intel Wireless-N 7260
since some days my wifi has stopped working.If I click on Wifi icon it shows only ONE (max two) NETWORK:And I live in a building with 20+ networks, as you can see from WiFi Analyzer (I'm the red one on the right).If I deactive/reactive Wifi with fn+f12, it goes to Airplane mode and to Wifi mode again and it eventually shows all the networks/My Wifi is on the top. If it's saved, Windows connects to it and then it drops the connection; if it's not saved and I try to connect, it says "You're not able to connect to this network".The fun fact is that after some seconds every network disappear and only one is showed (probably the neighbour one..I dunno).
I've already tried to HARD-RESET the notebook keeping the power button for 10/15sec with the laptop turned off.I've already tried to follow these instructions [URL] ... updating drivers (Intel 18.12.0.3, 18.12.1.2, 18.30.0.9 [Windows 10 default], 18.32.0 [Lastest drivers]) with no success. Everytime I install a new drivers, I uninstalled the previous one + Wireless software + reboot.
I tried to uncheked "Allow this computer to turn off this device to save power" on my Wifi hardware settings without success.The HP Network support says I didn't choose a Wifi (Really? The problem is I don't see my Wifi on the list!).This is not related to a new Windows 10 upgrade since I've installed it months ago and It's the first time I've this problem :/ It always worked
I tried different settings too/I changed channel, I set 802.11g on my router, APSD off on the router.I set "Magic packet off, ad hoc QoS off, U-APSD off, fat channel off,incremental throughput off, HT mode off" on the card setting without success. Nothing chaned.The Hardware test doesn't detect any failure. If I go close to the router, it shows my network with full power connection and it connects to it. Then I go back to my bedroom (probably 3/4 meters far), it KEEPS the connection for 30/40min and It drops the connection and I can't reconnect to it anymore. It always worked perfectly in my room in these months (I bought it in March 2015), so the distance is not a problem, I'm 6/7m far from the router.In this case It shows my Network (Connected) and the neighbour network...and the other 20+ networks???
The only way I have is USB tethering with my Nexus 5.I tried the Wifi connection on Elementary Freya (Ubuntu linux based OS) and it shows 20+ networks available on the list. It has not connection problem with my Wifi, but sometimes it stops working, the webpages stop loading and I must reboot Wifi to reconnect to it (usually after 30/40min using it).What's the problem? Is my Wifi card broken?
How do I find my network DVR in Network and sharing center?
View 4 RepliesJust upgraded to Win 10 and kept losing internet access. After troubleshooting my home network is now named "Network 2". How do I change the name to "Network 1 "?
View 3 RepliesToday, while having lunch at my favorite restaurant, I tried to connect to their WiFi network as I usually do. I got the following message:Checking network resources.And then, after a few seconds: Can't connect to this network. My obvious question is, why not? To begin with, was it something wrong with my computer, or something wrong with their network?
For example:
DHCP server did not respond
DHCP server did not issue an IP addressStored password incorrect; enter new password: _________
WiFi adapter card not respondingInsufficient virtual memory
But no, none of that useful information was offered. How am I supposed to fix the problem?
I have a desktop PC running Win7 64Bit Ent. It's not actually in use, so nothing is connected. I also have a laptop running Win10 64Bit which I'm using to type this post. I have some audio files on my desktop that I'd like to pull off of there, and put them on my laptop, and then maybe on a cloud. My 1st question: Is it possible to simply use a USB cable between 2 USB 3 ports if I simply power up the desktop with the USB cable connected? Does the USB protocol provide for me to see those HDD's on the desktop via the laptop? I'm quite limited for physical space, and I don't need the desktop to be running permanently, I just need to get these files off of it. If that's NOT a solution, what is the next easiest method?
View 6 RepliesI have forgotten my network security key, all of the info I find points me to connections, wireless properties, etc..... This does not match my updated Windows 10. What is the procedures for the latest updated Windows 10?
View 1 RepliesI have two Win 7 computers on my wired network and 6 Win XP computers on this same network. This main computer was Win 7 and just upgraded to Win 10 in November. For a year this network has worked just fine, plug and play basically when I set it up, now after Christmas shutdown (2 weeks), I can't see any of the computers on this network. The only thing I can see is the media drive on a computer called 6Head2. All I really do is transfer files from this main computer out to those 8 other computers.
What is wrong with my computer? Network discover, file sharing all checked, network location was changed from Public to Private today by me. But it did work last year, even with the network location being public.
I have a home network that includes-Two Windows 7 PCsTwo Linux machinesA Brother MFC7820N networked multifunction printer..All the above are on wired connections. Then there's an 802.11n wireless link for laptops and media devices.I'm just setting up a new machine that's running Windows 10 Home, using the wireless network. I was annoyed to find that Brother don't have a full-function Windows 10 driver for the 7820N that supports scanning, but the Brother site says the built-in drivers in Win 10 should work for basic printing.
Problem: I successfully added the printer device to Windows 10 (at the 3rd attempt) using the "manual advanced" method. The printer has an entry in the hosts file, and was added by host name.The printer fails to print, with a "not responding" type message. The driver also can't pick up the status info from the printer.
What's really weird is-I can ping the printer from the W10 box (and the other machines) by either IP address or hostname.However, this printer has a web interface. I can access this from any of the Windows 7 machines, but the Windows 10 machine says "web site failed to respond" or somesuch. This happens with any of: Edge, IE11, or Chrome browsers.I can't even make a manual connection (telnet to port 80) from the Win 10 machine (timeout).The Windows 10 machine CAN access all the other devices on the home network, including the web servers (Apache) on both the Linux boxes.
This looks like the web access to that particular address is being blocked somehow. I have tried disabling my AntiVirus package (Kaspersky), but that makes no difference. Is Win10 perhaps detecting an "old" web server on the printer and refusing to talk to it? (and why would that prevent printing using lpd?)
Nothing is working to get my computer to connect to the internet again. It was working fine yesterday so don't know what was changed. All other devices can connect. Using my laptop to search.
IPv4 is connected but I can't get IPv6 to connect at all. No error messages anywhere.
Fixed. Updated drivers worked. Just had to restart a couple times for it to work.
I have a USB connected printer (HP F4100) on my Windows 10 desktop. Everything appear to be working as I have no issue accessing the printer remotely on my Windows 7 laptop. The issue is trying to access from my Windows 10 laptop. I can see the shared workgroup in explorer, but no sign of the shared printer.
How to troubleshoot this? I've gone through the basics such as disabling Windows Firewall, but no luck. Everything looks fine in the advanced sharing settings and as mentioned, things are fine from my Windows 7 machine.
My impression of Windows 10 is not great so far. This along with my machine rebooting due to a security patch even though I had "Notify to schedule restart" selected. The whole mandatory security updates kind of irks me. I kind of get it, but as a power user, I should have the choice. Especially with the amount of sketchy patches that MS has released over the years.
I have Windows 10 laptop hooked up to an ethernet connection which has been working well for the past 6 months. On 2/18/16 it stopped working. I traced the problem to the Qualcomm Atheros network Controller/ Killer E2200 Gigabit Ethernet Controller: Internet status > IPv4 Connectivity: No network connection IPv6 Connectivity: No network connection Clicked: diagnose --> System checked & reset, with IPv4 Connectivity and internet access restored.
This resolved the problem until 3/4, following a Windows 10 update. The above solution no longer works. Clicking 'Disable this net work device' and then enabling it again restores IPv4 Connectivity and internet access for a limited time but loading a new site or page is slower than it was prior to the emergence of this problem on 2/18, and then the connection is again lost after maybe 10 to 20 minutes.
I suffer total loss of network connectivity after a computer crash. I am on win 10 x64
Here is my ipconfig /all:
C:WINDOWSsystem32>ipconfig /all
Windows IP Configuration
Host Name . . . . . . . . . . . . : Xello
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
[Code] .....
Windows troubleshooter reports that "One or more network protocols are missing on this computer".
Some other info: I am unable to connect to 192.168.0.1, which is my router's home page. I can load this page on my laptop if i connect my laptop with ethernet, so the router is fine.
Noted immediately after 1511 total system update, yet may have been inherited from an earlier build...
All is working well, yet Network Troubleshooter reports "one or more network protocols is missing."
Various posted remedies have been verified or implemented, to no avail.
Win 7, on the same machine, reports no errors.
I'm using static IP for Network #1 which is 192.168.1.110
But when I try joining another network let's say network #2 with a router address like 192.168.43.1 i have to change network settings and use another static IP 192.168.43.10
Can't i just ask windows to use static IP 192.168.1.110 when i try to connect to network #1 and 192.168.43.10 when I connect to network #2 without having to manually configure it every time ?
I really have to use static IPs when connecting to those two particular networks...
What would cause my computer to have one or more network protocols missing and how can I fix it?
Below is the screenshot of the troubleshooting report.
I started my PC in a new premises with a Wireless modem, I have two other PC's connected.
When I started the PC it saw the wireless network and the option came up to connect and there was a tick in the "Connect Automatically" box.
I selected OK but got a message "unable to connect".
I did not get the opportunity to enter the Password/Key.
Now the PC will not connect to the Network nor will and Diagnose and repair fix anything.
BTW the Ethernet adaptor has been disabled.
The laptop I am sending this from is next to the PC so the wireless signal is okay.
How to send a message over the network to a pc? On the same network ofc, I tried this on my NUC "Net send Strix_V3 hello" and it didn`t show up anything on my laptop. I don`t want any third party software.
And, I`ve set up my NUC as a file server with a 1TB external hard drive, and I have shared the two partitions over the network, but when my stepdad is gonna access some of his files he get a message that the owner of the server needs to give him rights or something. How can I make my stepdad have the exact same rights as I have?
Reader's Digest version: Both of us are on the same network through an Asus RT-AC56R router. Both are running Windows 10, fully patched, checked w/ Belarc. My network is visible to her system and public files accessible. Hers, and the usb printer on her PC are NOT visible at all to my side of the network. It's as though her system isn't on the network.
Every setting in network sharing matches. I've checked several times to be certain both PCs have the exact same Advanced Network Sharing settings.
I am also running Linux Mint 64-bit as a dual boot. Needless to say, networking using Linux is PERFECT.