i have a killer e2400 network adaptor over a wired connection on my msi motherboard. Unfortunately, out of the blue it has stopped working. I constantly get the error message "Ethernet doesn't have a valid IP configuration." I have tried a number of things such as stopping and restarting the services in computer management. Nothing appears to work. I know my router works as I'm using it now on another computer.
View 2 RepliesI know this problem has been discussed with many variants but not quite the same as I'm experiencing, so I'm starting a new thread.
I did a clean install of Windows 10 pro 64 bit, and everything was running perfectly, that is until two days ago when the computers on the network simply disappeared. I had done nothing with changes or new software or anything of that sort.
I checked network discovery and it was on, but the only computer showing was the home computer. I have tried turning discovery off then rebooting and then back on again and rebooting. In all cases the network drives are accessible. I have manually entered the computer name in the address bar of File Explorer eg "//COMPUTER2" and then I can go and enter the other computers manually. Everything will stay there until I close down File Explorer and then they disappear again only shown the home computer.
I upgraded to windows 10 from 8.1, ever since then, my Huawei 173 stopped working. The led light flashes, yet the network signal is not showing, the display hangs and several other issue.
View 1 RepliesI have been using this version of windows 10 from last 1 month. I installed all the drivers and everything was working just fine. From last few days my wifi driver isn't responding. I tried reinstalling the driver but the problem still exists.
I can connect through the Ethernet cable and the Bluetooth driver is also working. Only the wifi driver has stopped.
My laptop is Dell inspiron 5520
I have two desktops and a NAS drive on my network. Both PC's are Win10. One Pro, the other Home. Everything was working beautifully then out of nowhere the Home machine just stopped accessing the public folder on the Pro machine saying it didn't have permission. I thought the Public folder didn't need permissions if it's shared with Everybody. But it will access and read the other non-public shares on the Pro machine. Weird The Pro machine, however, doesn't even see the Home machine on the network any more, although I can ping it. Again, weird. I had a mapped drive to the Home machine which is now broken. Both PC's can see and access the NAS drive. No settings were changed, nothing was touched, it just worked one minute and stopped the next. The Pro machine was just updated to Build 10586.3 on 11/13/15. But I don't think that caused it because everything worked until the 17th. All the network settings were correct and they have not been changed. I can't find anything about it on the internet except the typical "Make sure Network Discovery is on and file sharing is enabled." Yes, Network Discovery is on and file and printer sharing is enabled on both machines. Still no go.
View 9 RepliesSo, I was updating the graphics driver, and the computer rebooted itself, when it turned back on all I saw was my chosen accent color in the frame of my main monitor (I have 3). I then turned off the computer, removed the card, and plugged one of my displays into the MOBO. The PC booted just fine, and ran normally. I turned off the PC, and put back in the graphics card and booted back up, I got the same thing. I'd been meaning to do a system refresh, so I chose then to do that. I did the refresh, and now whenever I have the card in the PC, I get stuck at the HP Boot screen (not letting me enter the BIOS) and the PC beeps once, then not again. I turn off the PC, remove the card, and Windows runs perfectly.
View 1 RepliesI recently bought a TP LINK TF-3200 card because my Lan port got fried :P. But, it id getting detected but is not working as I am not able to find new drivers for it.
View 8 RepliesI upgraded to Windows 10 on my gaming PC and suffered from network drivers not working along with my graphics driver. But now Windows 10 says it's not activated. "I had a legal version of Windows 7 on this computer and now Windows 10 isn't activated.
View 1 RepliesI'm not sure if it's related to the last update or not, but suddenly my homegroup started saying my other PC was offline. So I went and left it and recreated it, and sometimes it'll connect for maybe 5 minutes then disappear again. Also, it's saying almost everytime I try to join that Windows No Longer Detects a Homegroup on this network. Very strange since it's showing it. I can get to the other computer via the Network icon so it's not a disaster, but this is a frustrating issue.
View 1 Repliesafter installing a replacement GPU, RDP now only connects to the home server when i have "use all my monitors" enabled.If i have it unticked the session will try to open on my second monitor - which is connected to the onboard GPU, unlike the first, which is connected to the discrete one - as usual, but blurt out a connection error after starting to render the remote desktop.If i tick "use all my monitors" in RDP settings, a connection is made, but displayed on my main screen.
View 2 RepliesI've never seen this problem with the previous O.S., Windows 7, but Windows 10 is throwing me this error message approximately 70% of the time when I run the network troubleshooter...either from the Control Panel, or by right clicking on the task bar's connection icon.
Though Win10 is the first O.S. to give me this error, the Microsoft support forums indicate that it's been fairly annoying to Windows 7 users back to 2010. Also, Microsoft support employees just give vague general tips for trying to nail down the cause.
I'm only experiencing this in EDGE. Edge sometimes freezes on a webpage when I'm attempting to post a message to a forum, similar to what I'm doing now. I run the Network Troubleshooter and get the "Native Host Has Stopped..." error. I open a new Edge tab, come to this forum and try to do a search for the answer, but this forum's search function ignores my input. So, I opened IE-11, navigate to Win10 forum, and all works well.
Experienced the "Scripted Diagnostic Native Host has Stopped Working" error when running the network troubleshooter?
I am facing a problem that my PC running Windows 10 cant see other PC's/Devices on my network.
Idk. if it have something to do with i cant make/join a homegroup.
I was told to remove a file in "C:WindowsServiceProfilesLocalServiceAppDataRoamingPeerNetworking" but the file was not there.
I just installed (yesterday) the latest W10 update that installed Version 1511 (OS Build 10586.3) and my home network consisting of five W10 PC's has been "destroyed." I do not use Homegroup. Instead, I have always set up all the drives/folders as shared on all the computers. That worked just fine until now! For some reason only one of the PC's is detected by the other PC's on the network. However, all the drives that I had previously Mapped are OK. Is there some new magic setting that I have to change to get network discovery working again ...or... is MSFT forcing me to use Homegroup?
A little more information to add to my confusion. I was wrong above - two of the PC's are shown in the Network on all the PC's. One of the five PC's, which I use as a home server, runs 24-7. For some reason it has all the other PC's showing under Network and can access all the stuff on all the PC's!! I know it used to take Windows a few minutes to find all the PC's on the Network but... all the other PC's have been running for many hours and nothing changes.
I recently set up a Homegroup on a Win10 laptop so I can see another PC on the network. That PC is running Win8.1, and I would like to use it for file backup. The devices are visible on both ends of the network and have connectivity, but when I choose to use the File Backup function from the laptop, nothing transfers and eventually I have to restart because of no response from the system. Also, my browser will stop working. I have added the PC as a network location and specified the location for backup, but is has locked up twice now. Could this be a routing issue? I previously ran the auto backup feature to a memory card, but need more space.
View 2 RepliesI have changed my router. Is a 'FritzBox fon WLAN 7170'. First i connected, it was all good, i tried to connect to browser and it was good. Then i tried to connect Steam. "Could not connect to the steam network, either check your connection and click 'Retry' or start Steam in offline mode."I looked up for the probem, tried to:
- start the shortcut with -tcp
- turn the firewall off
- remove Steam from processes
- uninstall Steam and install it again.
- delete all files from Steam (without steamapps folder)
I tried other games online, they don't work either..I saw that video - Fritz!Box Firewall Port forwarding - YouTube (is 3:22 minutes long, if you want to watch it)I saw on the internet i can connect to the router settings with WIFI connection and i can't connect (CMD - ipconfig - Default Gateway in the browser).
Do i need to port forwoard all of them ?Is the Dynamic DNS the case?Why is the IPV6 with "No network access"? -Is the IPV6 important for online games?Do i need to set IPV6 ON?
My windows 2003 server stopped working in normal mode, but working in "safe mode with networking" and giving reply from all peers, and reaching all remote locations. in Normal mode not even ping to peer and giving error "destination host unreachable". tried with new NIC. IP conflict coming when assigning used IP address, if giving a new IP address not even request going to peer showing the same error as "destination host un reachble".
View 1 RepliesProduct Name: Hp Omen 15
Operating System: Microsoft Windows 10 (64-bit)
Wifi card: Intel Wireless-N 7260
since some days my wifi has stopped working.If I click on Wifi icon it shows only ONE (max two) NETWORK:And I live in a building with 20+ networks, as you can see from WiFi Analyzer (I'm the red one on the right).If I deactive/reactive Wifi with fn+f12, it goes to Airplane mode and to Wifi mode again and it eventually shows all the networks/My Wifi is on the top. If it's saved, Windows connects to it and then it drops the connection; if it's not saved and I try to connect, it says "You're not able to connect to this network".The fun fact is that after some seconds every network disappear and only one is showed (probably the neighbour one..I dunno).
I've already tried to HARD-RESET the notebook keeping the power button for 10/15sec with the laptop turned off.I've already tried to follow these instructions [URL] ... updating drivers (Intel 18.12.0.3, 18.12.1.2, 18.30.0.9 [Windows 10 default], 18.32.0 [Lastest drivers]) with no success. Everytime I install a new drivers, I uninstalled the previous one + Wireless software + reboot.
I tried to uncheked "Allow this computer to turn off this device to save power" on my Wifi hardware settings without success.The HP Network support says I didn't choose a Wifi (Really? The problem is I don't see my Wifi on the list!).This is not related to a new Windows 10 upgrade since I've installed it months ago and It's the first time I've this problem :/ It always worked
I tried different settings too/I changed channel, I set 802.11g on my router, APSD off on the router.I set "Magic packet off, ad hoc QoS off, U-APSD off, fat channel off,incremental throughput off, HT mode off" on the card setting without success. Nothing chaned.The Hardware test doesn't detect any failure. If I go close to the router, it shows my network with full power connection and it connects to it. Then I go back to my bedroom (probably 3/4 meters far), it KEEPS the connection for 30/40min and It drops the connection and I can't reconnect to it anymore. It always worked perfectly in my room in these months (I bought it in March 2015), so the distance is not a problem, I'm 6/7m far from the router.In this case It shows my Network (Connected) and the neighbour network...and the other 20+ networks???
The only way I have is USB tethering with my Nexus 5.I tried the Wifi connection on Elementary Freya (Ubuntu linux based OS) and it shows 20+ networks available on the list. It has not connection problem with my Wifi, but sometimes it stops working, the webpages stop loading and I must reboot Wifi to reconnect to it (usually after 30/40min using it).What's the problem? Is my Wifi card broken?
Since yesterday i keep getting this message and image screws up, sometimes the pc restarts, i downloaded the lastest nvidia drivers and updated windows.
View 1 Repliesdisplay driver intel hd graphics drivers for windows 8® stopped responding and successfully recovered.
PNG 7.24KB
I'm having this frequent problem with my desktop computer. Since updating from Windows 7 to Windows 10, every time I use my PC (at random times) the whole screen will just go blank and I'll get a little message popup in the right hand corner saying.
Display driver stopped responding and has recovered
Display driver AMD driver stopped responding and has successfully recovered.
I don't use my PC for anything real heavy it just randomly happens.. From either scrolling up and down a website page or watching a YouTube video etc... I've tried upgrading my graphics driver but still no luck.
Computer type: PC/Desktop
System Manufacturer/Model Number: DELL INSPIRON ONE
OS: Windows 10
CPU: AMD Athlon II X2 240
Motherboard: Dell 0DPRF9
Memory: DDR 3 4GB
Graphics Card(s): AMD Mobility Radeon HD 5000 Series
I recently did a clean install to get Windows 10, but I'm getting two issues atm. The major one is a freeze crash where the computer will freeze, and the have the audio go really slow, robotic or at other times it will stutter/repeat. Sometimes the screen will also go black. It started happening around once per a day after I installed Windows 10. The only way to get out of it is to restart the computer, but when I restart it, the computer doesn't get past the windows loading screen. But on the 2nd restart after manually pressing the power button, it finally goes back to normal and boots up properly. It's happened around 4-5 times already since I installed Windows 10 a week ago.
The second issue might be related but around once a day, my screen turns black and I get a notification that Nvidia driver (model #) has stopped responding and has recovered. It's really quick and lasts only 3-5 seconds, so its not that annoying. This is a issue that I've had for a while even back in Windows 7. I always update the drivers for the GTX 660 Ti using Geforce Experience from Nvidia, but it never solves the issue.
I did get 1-2 BSODs since installing Windows 10, but I'm not sure if they are related.In the dump file, there is information that says the BSOD error is a "VIDEO_SCHEDULER_INTERNAL_ERROR (199)" with the driver reporting a invalid fence ID. I looked it up online and I tried a solution, but it didn't work. I'm a bit stuck on what to do next. I also forgot to mention that if I press the sleep key on my keyboard and later awake from it, windows tends to slowly crash and eventually BSOD. By slowly, I mean that the taskbar starts to disappear as well as the start menu, but I can still use my programs such as Chrome to a limited degree, which is quite weird.
Sometimes when I play Hearthstone (which isn't even a super graphic intensive game), the screen freezes for 1-2 seconds before showing this message. figure out what could be causing this?
My computer is a Lenovo Flex 2 running Windows 10.
have a problem with usb drivers according to my control panel which says it is fixing the issue and then tells me to reboot but it is not fixed. Keyboard lights up on start but when the first blue window appears it goes off. I can get into the bios ok and the keyboard works there. only one port is working (USB3). as my mouse and keyboard are usb and there is no PS2 port i am kinda cactus at the moment. Been searching for usb drivers for win 10 but not having any luck. Everything was working fine since November until yesterday.
View 2 RepliesHow do I find my network DVR in Network and sharing center?
View 4 RepliesI've been having this issue for almost a month now and nothing I have done has managed to fix the issue. Randomly I will get this error message:
After a few of these error messages it will eventually BSOD or freeze as seen here:
I will get both of these by doing pretty much any task on the computer, whether it be watching a video, browsing a site or even just sat at the desktop. However extremely interesting is the fact that this error will not appear in any form whilst playing games on the computer. It will not error or BSOD or anything. But doing any other task will do so, even if i have 1 program running on my entire PC.
Things I have tried so far:
Updating drivers
Uninstalling/reinstalling drivers
Installing beta drivers
Using 'Display Driver Uninstaller' to clear drivers
Cleaned out the PC of all dust present
Took out and reseated graphics card from motherboard
Put my 2 RAM sticks into different slots on the motherboard
Unplugging my 2nd monitor so I am only using one
Adding a TDR delay to my registry
Full virus scan
Updating my BIOS software
The only things I have not tried is swapping out hardware components as I am unsure if it is a hardware issue or a software issue as of yet.
I've noticed that the BSOD and errors become more common the longer the PC is left on. For example last night it was blue screening every 5 minutes of being active.
The error does not seem to continue whilst in safe mode as last night i spent a long time in 'Safe Mode Networking' in order to look up possible fixes. I am not sure if it does not continue because of drivers not being in use or because the quality is much lower than normal.
I keep getting this error ...
I got this image from google i have the latest driver version(361.43) and i still get it just got it ~30 mins ago.