Networking :: Network Folder Cannot See Some Computers But Can Access Them Fine
Feb 10, 2016
I have a strange issue on my Windows 10 computer: I can only see 1 computer under my home network, but other computers do not appear at all. However, I can access them fine typing in the address bar manually.
Also, for some reason, "LEESERVERPC" does not appear on my network folder, but it appears on the left pane. Is this a Windows 10 issue? Other computers are running Windows Server 2012R2 or Windows 7 and they easily find all computers in the network. I rebooted and resetted my router countless number of times. Refreshing doesn't seem to do anything.
Background: Originally, my Windows 10 computer was seeing all the computers in the network. As I was trying to set up another computer on the network, I refresh my network several times from my Windows 10 computer, and all a sudden all the computers except 1 disappeared on my Windows Explorer "Network". Every other computer in the network has no issues.
See Pic:
I want to emphasize that I CAN ACCESS the shared network computers. It's just that Windows Explorer's "Network" does not show most of the computers!
View 3 Replies
Similar Messages:
Oct 10, 2015
I have a desktop and a laptop setup at home, I have recently upgraded both to Windows 10. Both were previously running Windows 7 Home Premium and could identify each other on the network and I could access files on either PC from one or the other at any time.With the upgrade to Windows 10 I am still able to see the other machine on the local network, but I am unable to access their folders and move files between machines. The error message I get is as follows.When I run the network diagnosis no errors are detected and it asks me if I want to explore other options.
The full error message is:I do have shared libraries available across both machines that are part of my homegroup, so I can access the video files in the hard drive of my desktop from my Laptop but only to play them - not to move them around.I suspect this is either a user validation issue, or a firewall issue and I'm not sure how to go about checking whether this is the case or not.
View 6 Replies
Nov 2, 2015
I just updated to Windows 10 but I think the problem was with Windows 8 too, Sometimes my internet is out on my PC while the internet is still up on my brothers PC, tho this problem happens about 3 times a very few days.. We have 5+ computers in the house and 4 are on daily while 3 is being used daily the 4th one is not very used daily and sometimes off most of the time. So the 2 computers have Windows 10 and 3rd computer has Windows 7 while the 4th computer has Windows 10 also. I read on an article which says that Windows 10 uses bandwidth without you know and I checked task manager and on windows 8 my CPU and Memory was just fine and when I upgraded to Windows 10 my CPU spiked to about 20% and Memory spiked to about 72% and sometimes random numbers appear on all 4 sections( CPU, Memory, Disk, Network).
View 9 Replies
Feb 10, 2016
From one of my Windows 10 machines I am unable to access the shared folders on the other. The troubleshooter says "One or more network protocols are missing on this computer" and "Windows Sockets registry entries required for network connectivity are missing."
I have run sfc /scannow, but no problems were found. I don't get the problem when sharing in the other direction or when accessing the shared folders on the same machine.
This comes amidst a cluster of sharing-related problems. Before the reboot after which the present problem manifested itself, shares going in the other direction were invisible in the network browser (but could be accessed via the search bar). Also, the machine in question does not appear in the HomeGroup browser even though it is a member of the HomeGroup.
View 3 Replies
Jan 4, 2016
I have two Win 7 computers on my wired network and 6 Win XP computers on this same network. This main computer was Win 7 and just upgraded to Win 10 in November. For a year this network has worked just fine, plug and play basically when I set it up, now after Christmas shutdown (2 weeks), I can't see any of the computers on this network. The only thing I can see is the media drive on a computer called 6Head2. All I really do is transfer files from this main computer out to those 8 other computers.
What is wrong with my computer? Network discover, file sharing all checked, network location was changed from Public to Private today by me. But it did work last year, even with the network location being public.
View 2 Replies
Nov 15, 2015
I can reach them by the quick access shortcuts I added before the upgrade but they don't show up in WE Network.
Rebooting my WD MyCloud solves the problem until next time I reboot my Win10 c.
View 6 Replies
Feb 10, 2016
I have 3 computers on the network. All have shared folders . My problem is as follows.
Lets call the computers c2, c3, c4. I am using network shares
When on computer c4 , computers c2 and c3 are not listed at all under network. Sometimes I do see c3 listed but cannot access it.
In computers c2 and c3 , all computers are listed and I can view all the shared folders in c2 , c3 including those on C4.
I cant understand why c4 have such problems viewing other computers on the network. I have rebooted router ( E4200) and computers but still have same problem .
All shared folders are properly shared. and no passwords are required for networks in adv sharing .
View 1 Replies
Feb 23, 2016
I have an issue on both my Windows 10 laptop and desktop PC. Both are DELL and new. Suddenly, my PC wouldn't connect to the internet using ANY wifi network. For this reason, I eliminated my WiFi modem - because the same issue happened when using my phone tethering. Using the Ethernet cable worked. Then a few weeks later my laptop has the same issue, but with this I can't plug in an ethernet port, because it dosen't have one. Both computers had IP Vanish VPN (probably nothing to do with it but thought I'd mention). I believe these issues happened after updates.
I've tried disabling firewall, antivirus, uninstalling Vanish VPN, using cmd from things I've seen recommended, updated network adapter on desktop.
View 9 Replies
Dec 2, 2015
I recently upgraded the 3 machines on my home network to windows 10 home.
Currently when I open up "this PC" and click on network, only one of the 3 computers shows up, and this machine is not the local machine on 2 of them. However If I type in the UNC address for the other machines I can access them.
If I set up a home group all the computers show up in the home group roll out under "this PC" but still not in the network.
Something else that is strange. If I look at "network and sharing center" two of the the computer see one private network name and the other one sees a different name.
View 4 Replies
Nov 17, 2015
I have two desktops and a NAS drive on my network. Both PC's are Win10. One Pro, the other Home. Everything was working beautifully then out of nowhere the Home machine just stopped accessing the public folder on the Pro machine saying it didn't have permission. I thought the Public folder didn't need permissions if it's shared with Everybody. But it will access and read the other non-public shares on the Pro machine. Weird The Pro machine, however, doesn't even see the Home machine on the network any more, although I can ping it. Again, weird. I had a mapped drive to the Home machine which is now broken. Both PC's can see and access the NAS drive. No settings were changed, nothing was touched, it just worked one minute and stopped the next. The Pro machine was just updated to Build 10586.3 on 11/13/15. But I don't think that caused it because everything worked until the 17th. All the network settings were correct and they have not been changed. I can't find anything about it on the internet except the typical "Make sure Network Discovery is on and file sharing is enabled." Yes, Network Discovery is on and file and printer sharing is enabled on both machines. Still no go.
View 9 Replies
Jan 22, 2016
Our home network has a desktop and 3 laptops. The 3 laptops all print through the network to the printer attached to the desktop.
For some reason only 1 of the laptops now shows in the desktop network folder. The other 2 have vanished and cannot see the desktop either so no printing. I have tried running both Homegroups and using names & passwords but no difference. I also have a server on the network and that has vanished.
I have checked the credentials and all passwords and names are correct.
I have removed Avast anti-virus and have Windows firewall set to default settings running with Defender.
Windows 10 is the latest version 1511 on all the PCs.
View 2 Replies
Jan 14, 2016
i have been suffering slow WiFi speeds for a while now and sky have replaced my router.
I have two computers both running windows 10 with the latest build
Now since i started with this router i have lost my home network and i have not changed anything on the computer
Some times i can see my other computer but not able to connect to it. sometimes i can see nothing. sometimes i can see the sky router and sometimes not.
My network is set to private on both computers and file and printing is turned on.
All i have done is plugged in a new router.
Sometimes i can see on my network a device called AirTies WAP what is this.
After doing a google search i found that AirTies WAP is something to do with my Sky wireless booster. is that right.
I am not able to see the other computer it says error 0x80070035
View 9 Replies
Jan 6, 2016
OK, so I have this one Windows 10 computer.
When trying to access a Windows 8 computer under "Network", it prompts me for a user/pass.
All other computers (Windows 7/8) can see the public folders of each other no problem; even the public folders of this one Windows 10 computer!
View 1 Replies
Jan 14, 2016
i have been suffering slow WiFi speeds for a while now and sky have replaced my router.
I have two computers both running windows 10 with the latest build.
Now since i started with this router i have lost my home network and i have not changed anything on the computer.
some times i can see my other computer but not able to connect to it. sometimes i can see nothing. sometimes i can see the sky router and sometimes not. I am not able to see my printer at all on ether computer.
My network is set to private on both computers and file and printing is turned on.
All i have done is plugged in a new router.Sometimes i can see on my network a device called AirTies WAP what is this.
View 1 Replies
Jan 8, 2016
I have two computers running windows 10 and until recently they were both connected via WiFi, but recently after having problems with the WiFi my ISP told me the router should be connected to the master telephone socket.
Until they told me this the router was connected to a phone extension roughly halfway between my two computers, one downstairs and one upstairs. and it has been like that for almost a year with a reasonable speed to both computers, but just recently the WiFi speed has dropped so much it is almost impossible to use it.
So i have moved the router upstairs and connected it to the master phone socket and its so close to my PC i have used a Ethernet wire to connect to the computer and my download speed has doubled to the PC.
But one problem i have now is the other computer is now not visible on the network. so why when they were both connected via WiFi both were visible, but now one is connected via Ethernet and one WiFi they can not see each other.
Also now my router is upstairs the laptop downstairs connected via WiFi is so slow its useless. What to do i know i can get homeplugs but do they really work ...
View 7 Replies
Nov 24, 2015
My internet worked fine and I didn't do any changes to it up until it stopped working. I've managed to fix the internet access to allow me to access the internet on my laptop through wi-fi but network access still says no internet access. Websites work however ethernet does not work! I can't connect online on my playstation because ethernet doesn't work. I've tried disabling and enabling the ethernet. I checked the cables, I re-installed the drivers and i turned off and on the router more than I could count.
The internet works on my laptop however a connection test on my playstation 3 says obtain ip address succeeded and internet connection failed. So I can't play online. I am absolutely certain the playstation 3 is not fault as I checked vigurously the settings and I've put in the right connections, however it still does not work? Should I buy new cables for the router?
View 8 Replies
Jan 10, 2016
I have a home network that includes-Two Windows 7 PCsTwo Linux machinesA Brother MFC7820N networked multifunction printer..All the above are on wired connections. Then there's an 802.11n wireless link for laptops and media devices.I'm just setting up a new machine that's running Windows 10 Home, using the wireless network. I was annoyed to find that Brother don't have a full-function Windows 10 driver for the 7820N that supports scanning, but the Brother site says the built-in drivers in Win 10 should work for basic printing.
Problem: I successfully added the printer device to Windows 10 (at the 3rd attempt) using the "manual advanced" method. The printer has an entry in the hosts file, and was added by host name.The printer fails to print, with a "not responding" type message. The driver also can't pick up the status info from the printer.
What's really weird is-I can ping the printer from the W10 box (and the other machines) by either IP address or hostname.However, this printer has a web interface. I can access this from any of the Windows 7 machines, but the Windows 10 machine says "web site failed to respond" or somesuch. This happens with any of: Edge, IE11, or Chrome browsers.I can't even make a manual connection (telnet to port 80) from the Win 10 machine (timeout).The Windows 10 machine CAN access all the other devices on the home network, including the web servers (Apache) on both the Linux boxes.
This looks like the web access to that particular address is being blocked somehow. I have tried disabling my AntiVirus package (Kaspersky), but that makes no difference. Is Win10 perhaps detecting an "old" web server on the printer and refusing to talk to it? (and why would that prevent printing using lpd?)
View 9 Replies
Nov 8, 2015
Nothing is working to get my computer to connect to the internet again. It was working fine yesterday so don't know what was changed. All other devices can connect. Using my laptop to search.
IPv4 is connected but I can't get IPv6 to connect at all. No error messages anywhere.
Fixed. Updated drivers worked. Just had to restart a couple times for it to work.
View 9 Replies
Nov 8, 2015
my Windows 10 Enterprise PC cannot access to my company's network storage at 10.63.0.250. In the previous edition like windows 7 or 8, I can access easily by enter 10.63.0.250 in the Address box in File Explorer or in Run windows (Window button + R). However, I have got trouble since I upgraded to Window 10. The notification is "The network path was not found", although I can ping to this and another PC can access the network storage in File Explorer.
View 8 Replies
Aug 9, 2015
On my desktop (AKA S4, currently running Win8.1 x64 pro) I have shared out four of the hard drives with full permissions. I have 5 PCs in my network and all can access the four drives. My sister is visiting and currently accessing my network via cat5 wire. On her PC (running Win 10 x64 pro) if I view the network in Windows Explorer I can see my desktop (S4). When I double-click on S4 I'm prompted to enter network credentials. "Enter your credentials to connect to: S4" I entered my logon S4 ID and password but it tells me that the user name or password is incorrect. What the heck should I be entering? All computers are part of the same work group (WORKGROUP) and all computers are wired connected. All computers can access the internet.
View 9 Replies
Jan 25, 2016
Three machines:
Surface Pro 4 - fully updated
Surface Pro 3 - Windows 10, fully updated
Lenovo X220T - Windows 8.1 Fully updated
All three machines can see all available network devices, including each other.All three machines can successfully access and interact with third party network devices. In this case, it is a NAS and a network printer.The windows 8.1 machine can access each of the other windows 10 machinesNeither Windows 10 machines can access any other windows share on the network.
This gets me error 80070035 with diagnostics telling me nothing
All three machines are on a Homegroup and while each can see, no one can access anything
Trouble shooting tried:
Double checked all sharing settings on all three computers. They are identical.Double checked workgroupsTried it via IP addressesReset winsock on all machinesFlushed DNS on all machinesReset the routerUninstalled and reinstalled Windows sharing and about 3 other network protocols and servicesEnabled NetBiosran this: sc.exe config lanmanworkstation depend= bowser/mrxsmb10/nsi sc.exe config mrxsmb20 start= disabledMessing around with all sorts of netsh commands clearing and flushing all sorts of other things
View 5 Replies
Feb 14, 2015
I have two computers running Windows 10 Pro Technical Preview Build 9926. One computer is a desktop and it is working perfectly. The other is a new HP 15-F039WM laptop and it came with Windows 8.1 With Bing installed and it also works perfectly in Windows 8.1 mode. I resized the hard drive on the HP laptop to free up 150Gb of space and then installed Windows 10 TP Build 9926 from DVD. It still works perfectly when I use dual boot to go into Windows 8.1. When I use dual boot to go into Windows 10, the network icon in the system tray says "Unidentified network - No Internet access". I did swap cables, etc, but I knew that wouldn't work because the laptop does have Internet access when booting to Windows 8.1.
I read through some threads here after searching for DHCP and connectivity issues and even tried some of the suggestions such as using regedit to look at the network profile. There isn't a network profile. It is displaying a 169... IP Address, so I know that it isn't getting an IP. I tried to manually add the correct settings that work for Windows 8.1 (192.168.0.15 with 192.168.0.1 as the Gateway), but that fails.
View 9 Replies
Aug 17, 2015
I am having problem adding folders from a network drive to the Quick Access.
Firstly I can only drag and drop into the QA in explorer, as right clicking option doesn't work and it only allows one folder at a time to be included. Local folders are not a problem and any number can be included in QA.
Also pinning files to taskbar apps has a similar problem if they are on the network drive.
View 9 Replies
Dec 26, 2015
I have a usb connected hard drive connected to my Bell 2000 router. The instructions to access this drive is to go to the Documents folder and enter mynetwork. This then shows the shared hard drive as mynetworkNETWORKHD. If I now click on NETWORKHD I get the following:
mynetworkNWTWORKHD is not accessible. You might not have permission to use this network resource. Contac the administrator of this server to find out if you have access permissions.
Not enough storage is available to process this command. This all worked for me under Windows 7. I am unsure if it ever worked under Windows 10.
If I plug a 2 gb thumb drive into the other port on my Bell 2000 rounter it works without any problem.
View 1 Replies
Dec 1, 2015
I have a NAS (WD MyBookLive) which cannot be accessed in Windows Explorer on my brand new Surface by IP address (or name- though that doesn't work on any of my devices for some reason). I can access the config page in my browser by IP, and two other Win10 devices on my network can access the NAS by IP in Explorer fine, and I can access other devices on my network by IP fine on the Surface but for whatever reason only this computer can't access that NAS in Win Explorer.
I just got the Surface yesterday and was able to access the NAS fine, the only thing that's changed is I renamed the device and restarted and since then haven't been able to connect. I've restarted both the PC again and the NAS but no change.
View 9 Replies
Feb 10, 2016
Everything about my network worked fine on Windows 8. With Windows 10 I have been unable to access PC's on my router. Internet work fine, I see the PC's on network in homegroup, But gives me the dreadful and nonsensical error:
Worth noting that my windows 8 laptop can access these computers no problem. but my windows 10 pc's can access ANY pc's
Tried Everything
Winsock method
all elevated cmd prompt exe's
tcp4/6 config
drivers config
network settings configs
I am left with no choice but to go back to windows 8 ?
View 1 Replies
