Networking :: Network Protocols - Enable / Disable For PC Usage
Mar 5, 2016
Which Network Protocols should I enable or disable for my PC?
My PC usage and router set up:
- file downloading while also browsing web or streaming video
- I don't do any lan/network sharing
- Torrent file sharing
- QOS is disabled on my router
- The PC is connected with Ethernet cable
My current settings
[ ] Client for Microsoft Networks
[ ] File and Printer Sharing for Microsoft Networks
[ ] QoS Packet Scheduler
[ x] Internet Protocol Version 4 (TCP/IPv4)
[ ] Link-Layer Topology Discovery Mapper I/O Driver
[ ] Microsoft Network Adapter Multiplexor Protocol
[ ] Microsoft LLDP Protocol Driver
[ ] Internet Protocol Version 6 (TCP/IPv6}
[ ] Link-Layer Topology Discovery Responder
View 1 Replies
Similar Messages:
Dec 6, 2015
Noted immediately after 1511 total system update, yet may have been inherited from an earlier build...
All is working well, yet Network Troubleshooter reports "one or more network protocols is missing."
Various posted remedies have been verified or implemented, to no avail.
Win 7, on the same machine, reports no errors.
View 9 Replies
Jan 1, 2016
What would cause my computer to have one or more network protocols missing and how can I fix it?
Below is the screenshot of the troubleshooting report.
View 9 Replies
Jan 12, 2016
So I've had this issue for about three days now. I am able to connect to my home router, but I am unable to connect to the Internet. Troubleshooter said "One or more network protocols are missing". Not sure what happened, never touched networking except for connecting to my network. I created a thread on Microsoft Answers website. You can view the page here: One or more network protocols are missing on this computer....
View 1 Replies
Feb 23, 2016
What can be done about "Missing Network Protocols", Windows 10 both computers/laptops?
View 2 Replies
Jan 4, 2016
I just had this very annoying issue for a while, and scouring the internet proved to no avail. However, I stumbled upon the solution by myself. Simply go into an elevated command prompt and enter netsh int ipv4 install and restart your computer.
This is what solved the problem for me, though I had already tried a few suggestions (resetting winsock, giving permissions in NSI, etc) so that might have something to do with it.
View 9 Replies
Feb 10, 2016
When I run the troubleshooting I keep getting the message that says:
"One or more network protocols are missing in this computer".
When I run the "netsh winsock reset" in the Administrator Command Center, I get the messages:
" The following DLL cannot be loaded: NETIOHLP.DLL" and "The following DLL cannot be loaded: NSHIPSEC.DLL".
View 2 Replies
Feb 23, 2016
this issue has plagued me forever since windows 10, and even slightly in windows 8.1. this issue would come randomly and i cant connect to internet even if i were a point blank in front of the router. running the troubleshooting does not fix it. the only way to fix it most of the time is to disable the wifi adapter for about 2 minutes and re enable it again. in some cases only a reboot can fix it and in rare cases it can only be fixed by uninstalling the wifi drivers and starting over.i have tried with 3 different wifi adapters, 2 computers and 2 routers.
it seems to struggle the most with connecting to optimum wifi/Xfinity wifi (which my laptop is added to my account) its mainly this optimum wifi here causing issues making router itself a issue but still. the other router is my 4g sprint hotspot, sometimes on rare occasion the same thing happens.
View 6 Replies
Jan 2, 2016
This happened after the latest major update.
I've tried the following steps with no success 1) sfc /scannow. This showed no errors
2) netsh advfirewall reset netsh int ip reset*** netsh int ipv6 reset netsh int ipv4 reset netsh winsock reset *** This command did not work originally until I went to HKEY_LOCAL_MACHINE/SYSTEM/CurrentControl and changed Control/NSI folder 26 permission to everyone (This box was unchecked again after reboot
3) ipconfig /flushdns ipconfig /registerdns ipconfig /release ipconfig /renew
4) Disabling and Renabling the Network Adapter within device manager.
5) Uninstalling the driver
6) Installing the latest drivers both from the Asrock/intel website and googling my network adapter.
7) I saw the fix where someone deletes the Windows 10 WIN and WIN2, and replaces with a clean Windows 7/8 version in this registry: HKEY_LOCAL_MACHINESystemCurrentControlSetServicesWinsock HKEY_LOCAL_MACHINESystemCurrentControlSetServicesWinsock2
- Did not work also, it gave me a new problem no ethernet something which troubleshoot can't also fix.
8) Finally Reset W10. Still get the same error
View 9 Replies
Feb 10, 2016
I have suddenly noticed a problem with internet connection. I cannot download any apps from Microsoft store (with unknown error message). Strange is that each other software (cloud clients, browser, ....) works perfectly.
I have already searched for solution on google and found command wsreset.exe but this did not work..
I have also tried network troubleshooter. It has found these errors:There is one or more missing network protocols. Windows sockets registry entries are missing
I have tried to repair these errors with some netsh commands, which actually did something but did not solve anything.
Another solution is to reinstall network drivers but this did not work either.
View 4 Replies
Dec 28, 2015
I have w10, running a static ip address through time warner cable in Ohio. Time warner said they had a problem on their end, ever since then I can't connect to our security cameras. I run a powerline from the house to the office., have reset my computer, modem and wireless router. Still getting the same error - one or more network protocols are missing from this computer. I tried talking with time warner cable - no go!
View 9 Replies
Feb 24, 2016
Trying to reinstall a WD MyBook external hard drive. Receiving the following "One or more network protocols are missing on this computer" Following diagnosis receiving "Restore network protocols to default settings", and "Windows Sockets registry entries required for network connectivity are missing". My computer is an HP Pavilion 23 all-in-one. My wireless router (connected with an Ethernet cord) is an ATT 67XHG8k.
View 4 Replies
Feb 10, 2016
From one of my Windows 10 machines I am unable to access the shared folders on the other. The troubleshooter says "One or more network protocols are missing on this computer" and "Windows Sockets registry entries required for network connectivity are missing."
I have run sfc /scannow, but no problems were found. I don't get the problem when sharing in the other direction or when accessing the shared folders on the same machine.
This comes amidst a cluster of sharing-related problems. Before the reboot after which the present problem manifested itself, shares going in the other direction were invisible in the network browser (but could be accessed via the search bar). Also, the machine in question does not appear in the HomeGroup browser even though it is a member of the HomeGroup.
View 3 Replies
Aug 10, 2015
We drag the Local area connection and place it in the riht upper corner of the displayWe connect via Realtek PCIe GBE Family Controller.We then right click on the icon when we want to connect to the Internet - we ENABLE.When we want to disconect - We rightclick on the Icon and DISABLE
It has worked in all our windows up to Win 7 included.But now in Win 10 that we have upgaded to (free) it does not work.If we want to disable we only see the alternative ENABLE.WE ALSO INTEND TO INSTALL WIN 19 ON OUR SECOND COMPUTER. I THINK I SKALL THIS TIME MAKE A CLEAN INSTALL.IS IT OK TO START WITH THAT AS SOON AS I GET THE WHITE FLAG AT THE BOTTOM OF THE DISPLAY.I HAVE PICKED UP AN ISO FILE AND LOADED IT DIRECT TO AN USB-MEMORY.
View 3 Replies
Nov 15, 2015
Problem trying to connect to internet on laptop, but all working as normal on desktop.
Investigations revealed....one or more Network Protocols are missing on this computer, also Windows sockets registry entries required for network connectivity are missing....this on both Ethernet and wireless but they had been working perfectly since the update last week.
My laptop supposedly required "Internet connections Package Version 3.0 Publisher Microsoft Windows."
After messing about for an hour without success I loaded the 1511.. ISO.. knowing that I could not connect to the internet to download anything, this seemed to solve the problem, (fingers crossed) I can only assume this made the internet connection possible.
View 9 Replies
Apr 5, 2016
Several times a day, my laptop's WiFi connection status changes from 'Internet access' to 'No internet'. When I use 'Troubleshoot problems', I get this: "One or more network protocols are missing on this computer - Windows sockets registry entries required for network connectivity are missing". Trying the 'perform repairs as administrator' fix does nothing, but restarting the computer lets me connect properly again. However, losing connectivity and restarting my computer every couple hours is getting irritating.
Earlier in the year I was getting the same message, but at that time simply restarting wouldn't fix it, I believe I needed to do either 'netsh winsock reset' or 'netsh int ip reset'. I honestly don't remember why it stopped happening, possibly changing away from Bitdefender antivirus (which fixed the BSOD problem I was having) worked. I haven't reinstalled Bitdefender, so I assume it's not that.
Some details:
· OS - Windows 10, 64-bit
· originally Windows 7
· Windows 10 installed via free upgrade
· Age of system: 2.5 years
· Age of OS installation: 6 months, have not re-installed
· System Manufacturer: Lenovo
· Exact model number: Lenovo IdeaPad U310, model name 437
View 14 Replies
Feb 23, 2016
I'm trying to get to Gibson's Research website. I cannot access it. I'm being told I'm missing network protocols. How do I find what protocols I'm missing.
Windows 10 on a Dell Venue 8 pro tablet. Chrome, Internet Explorer, and Edge cannot access the website. IE is telling me about the missing protocols. The other two just say cannot access website.
View 4 Replies
Jan 27, 2016
After updating my windows 10 rig, I cannot connect to the internet. When I run the troubleshooter, this error message shows up, "one or more network protocols are missing". I have tried several fixes including uninstalling and reinstalling the network drivers, going in and installing any missing network protocols, and a few other things. Nothing has worked or made any visible progress. I also used system restore, and restored to before the update, but it didn't do anything either.
View 1 Replies
Jan 6, 2016
I have a Lenovo Z575 laptop w/ Windows 10. I recently updated to Windows 10 a couple months ago and everything was fine up until recently. I've been having this issue the past couple of days where I try to load up a webpage, it states that connection has timed out, so I use the Troubleshoot Problems option for my wifi, and it gives me the statement "One or more network protocols are missing". I used the "netsh int ip reset" command in the Command Prompt, and that seemed to work at first, but yesterday it happened again, only this time, it seems to pick and choose what pages load.
View 1 Replies
Mar 16, 2016
So as the title says I'm receiving this error when connecting to the internet that says "one or more internet protocols is missing on this device".
First a little back story: To make it short, I just I replaced the power supply in my PC, and disconnected/reconnected all cables, including data cables. When I booted my PC back up I was having this issue. The icon shows that I have internet but it will not connect in the browser or download updates.
I have seen other threads with this same error message and I have tried every software fix I have seen at this point, including uninstalling and reinstalling my drivers. In desperation I did a clean install of windows 10 hoping it would fix this issue.
View 1 Replies
Jan 22, 2016
After the major Windows 10 upgrade that happened I think in late November to early December of 2015 my network connection started dropping periodically. This is wired connection directly to my router and I've done all the netsh winsock reset and other solutions listed all over the internet, but like clock work I lose internet connection to just my desktop. All my wireless devices continue to work just fine. When I select repair connection I get the error of protocols are missing. The adapter has a visual status of identifying network. I thought it was a DHCP issue, but it still happens with a static IP address. This so frustrating as the only thing that fixes it is a reboot and then it seem like the clock resets for another 24 hours. I've tried going to device manager and updating drivers but it tells me the drivers are up to date. I've uninstall the drivers and allowed the OS to reinstall them to no avail. I've even deleted the adapter and restarted and allow it to find the hardware and re-add the driver and none of this seem has fixed the problem.
View 2 Replies
Dec 9, 2015
I was trying to mess around with a few things in the sound settings so that I could get audio to play through my headphones. While doing this, I disabled my speakers that were plugged in. Now, I want my speakers to return being the main sound playback device.
View 2 Replies
Mar 23, 2016
Is there an easy way to disable and re-enable groups of services / processes in Windows 10 so that the computer can be switched between optimization 'profiles' for, say, routine office work, audio/video editing, and gaming?
I have two computers now - one for routine office work (e.g., Office suite, Quickbooks) and a dedicated audio/video editing workstation. The latter is very powerful and I'd like to use it for both jobs, but not if all those background processes (59 total), like Cortana, OneDrive, iCloud mean sacrificing resources for critical A/V work. Neither do I have the time or patience to manually disable scores of Startup apps and services each time I throw my A/V hat on.
View 1 Replies
Feb 10, 2016
So I have been without internet for a couple weeks and have spent hours trying to figure out what is wrong with my computer. I only have an ethernet port on my machine, connected to my router via powerline adapters (which work with my other PCs). Windows troubleshooter tells me that there are missing protocols, I have tried various things and nothing has worked. I have already tried: winsock reset(tool), replacing my winsock registry keys with another windows pc, I have tried that sfc /scannow command, no errors were found, i have also tried disabling netbios.
At some point I accidentally uninstalled 'microsoft network adapter multiplexer protocol', dont know how to reinstall it and now I am getting and ip config error from the troubleshooter. At this point I am thinking about re-installing windows. Is there a way to do this without losing settings for applications? This is such a freaking mess.
View 3 Replies
Feb 23, 2016
This just happened recently, and still not fixed.
My router modem is changed. The internet works properly in any other devices which are not win10.
From the wifi connection: it's connected to ssid but no internet access. I cant even ping the gateway. And from the troubleshooting it mentioned that some protocols are missing.
View 4 Replies
Jun 17, 2015
I'm using a Linksys AE2500 network adapter on Windows 10 technical preview and when ever the adapter is plugged in, my CPU usage nearly hits 100%. I've checked for malware and that doesn't seem to be the problem.
View 1 Replies
