Networking :: Network Machines Missing In Explorer
Nov 7, 2015
I have 5 computers and 4 are running Windows 10. The machine I use as the main one I upgraded from Windows 7 ULT to Win 10 and have had little trouble but, my number 2 machine I added the insider preview 5 builds ago and since then, when trying to view all machines in explorer only the Computers come up yet, on the main machine no problem, all machines that are on the network show up. The pic on the left is the No 2 machine and the one on the right is the No 1 machine. I use assigned IP addresses on all the hardware that show up in No 1.
View 4 Replies
Similar Messages:
Dec 16, 2015
Missing network device - EXTERNALDRIVE Since the last Windows 10 update which I installed on Dec. 9 I am missing one devices in Explorer > Network on one of three network computers.
They are all present on the other two computers. One of these is Windows 10., the other is Vista Premium.
The complete device list under network is Frankspc, Charlottespc, and Sue_ASUS and ExternalDrive.
The missing device on the Explorer list on Frankspc is EXTERNALDRIVE. I can ping it at 192.168.1.3 . how to get it back in the Explorer list?
View 8 Replies
Feb 23, 2016
If I have three computers on local network and only one has internet access will this update all machines on local network?
View 5 Replies
Dec 6, 2015
Noted immediately after 1511 total system update, yet may have been inherited from an earlier build...
All is working well, yet Network Troubleshooter reports "one or more network protocols is missing."
Various posted remedies have been verified or implemented, to no avail.
Win 7, on the same machine, reports no errors.
View 9 Replies
Jan 1, 2016
What would cause my computer to have one or more network protocols missing and how can I fix it?
Below is the screenshot of the troubleshooting report.
View 9 Replies
Jan 12, 2016
So I've had this issue for about three days now. I am able to connect to my home router, but I am unable to connect to the Internet. Troubleshooter said "One or more network protocols are missing". Not sure what happened, never touched networking except for connecting to my network. I created a thread on Microsoft Answers website. You can view the page here: One or more network protocols are missing on this computer....
View 1 Replies
Feb 23, 2016
What can be done about "Missing Network Protocols", Windows 10 both computers/laptops?
View 2 Replies
Jan 4, 2016
I just had this very annoying issue for a while, and scouring the internet proved to no avail. However, I stumbled upon the solution by myself. Simply go into an elevated command prompt and enter netsh int ipv4 install and restart your computer.
This is what solved the problem for me, though I had already tried a few suggestions (resetting winsock, giving permissions in NSI, etc) so that might have something to do with it.
View 9 Replies
Jan 3, 2016
We have 2 desktops, 2 convertibles and an hp tablet. We started with total mess network wise - tried most of the fixes and none really worked. I removed homegroup and started over making sure ALL units were in homegroup and still had problems. After many tries of fixes etc. I discovered two of the units were in different workgroups??
We are finally able to see all computers on all the computers but are left with two network drives which show up as media units but never show up and available in the computer area on all computers. Both show up fine on my desktop but never on any of the other units.
Have rebooted, checked settings and what to check now. We have used networking of some sort for years and depend on it - have been without it now for way too long.
View 3 Replies
Feb 10, 2016
When I run the troubleshooting I keep getting the message that says:
"One or more network protocols are missing in this computer".
When I run the "netsh winsock reset" in the Administrator Command Center, I get the messages:
" The following DLL cannot be loaded: NETIOHLP.DLL" and "The following DLL cannot be loaded: NSHIPSEC.DLL".
View 2 Replies
Feb 23, 2016
this issue has plagued me forever since windows 10, and even slightly in windows 8.1. this issue would come randomly and i cant connect to internet even if i were a point blank in front of the router. running the troubleshooting does not fix it. the only way to fix it most of the time is to disable the wifi adapter for about 2 minutes and re enable it again. in some cases only a reboot can fix it and in rare cases it can only be fixed by uninstalling the wifi drivers and starting over.i have tried with 3 different wifi adapters, 2 computers and 2 routers.
it seems to struggle the most with connecting to optimum wifi/Xfinity wifi (which my laptop is added to my account) its mainly this optimum wifi here causing issues making router itself a issue but still. the other router is my 4g sprint hotspot, sometimes on rare occasion the same thing happens.
View 6 Replies
Jan 2, 2016
This happened after the latest major update.
I've tried the following steps with no success 1) sfc /scannow. This showed no errors
2) netsh advfirewall reset netsh int ip reset*** netsh int ipv6 reset netsh int ipv4 reset netsh winsock reset *** This command did not work originally until I went to HKEY_LOCAL_MACHINE/SYSTEM/CurrentControl and changed Control/NSI folder 26 permission to everyone (This box was unchecked again after reboot
3) ipconfig /flushdns ipconfig /registerdns ipconfig /release ipconfig /renew
4) Disabling and Renabling the Network Adapter within device manager.
5) Uninstalling the driver
6) Installing the latest drivers both from the Asrock/intel website and googling my network adapter.
7) I saw the fix where someone deletes the Windows 10 WIN and WIN2, and replaces with a clean Windows 7/8 version in this registry: HKEY_LOCAL_MACHINESystemCurrentControlSetServicesWinsock HKEY_LOCAL_MACHINESystemCurrentControlSetServicesWinsock2
- Did not work also, it gave me a new problem no ethernet something which troubleshoot can't also fix.
8) Finally Reset W10. Still get the same error
View 9 Replies
Jan 22, 2016
Our home network has a desktop and 3 laptops. The 3 laptops all print through the network to the printer attached to the desktop.
For some reason only 1 of the laptops now shows in the desktop network folder. The other 2 have vanished and cannot see the desktop either so no printing. I have tried running both Homegroups and using names & passwords but no difference. I also have a server on the network and that has vanished.
I have checked the credentials and all passwords and names are correct.
I have removed Avast anti-virus and have Windows firewall set to default settings running with Defender.
Windows 10 is the latest version 1511 on all the PCs.
View 2 Replies
Dec 17, 2015
Cannot access the Internet after version 10 is installed on my desktop.
View 1 Replies
Feb 10, 2016
I have suddenly noticed a problem with internet connection. I cannot download any apps from Microsoft store (with unknown error message). Strange is that each other software (cloud clients, browser, ....) works perfectly.
I have already searched for solution on google and found command wsreset.exe but this did not work..
I have also tried network troubleshooter. It has found these errors:There is one or more missing network protocols. Windows sockets registry entries are missing
I have tried to repair these errors with some netsh commands, which actually did something but did not solve anything.
Another solution is to reinstall network drivers but this did not work either.
View 4 Replies
Dec 28, 2015
I have w10, running a static ip address through time warner cable in Ohio. Time warner said they had a problem on their end, ever since then I can't connect to our security cameras. I run a powerline from the house to the office., have reset my computer, modem and wireless router. Still getting the same error - one or more network protocols are missing from this computer. I tried talking with time warner cable - no go!
View 9 Replies
Sep 12, 2015
I cant create a virtual wifi network using this command : netsh wlan start hostednetwork (the "set" command works)
the solution is to enable Microsoft Hosted Network Virtual Adapter which is missing , and yes i tried to show hidden devices ..
View 3 Replies
Jan 31, 2016
I have been having issues with my WD MyCloud NAS not showing up under Network on the left navigation pane of File Explorer. I am able to access the NAS by entering the host name (WDMYCLOUD) in the address bar in File Explorer. I was able to find a solution that fixes this and makes my NAS appear in Network as expected. The solution involved running Command Prompt as Admin, executing some commands, then restarting the computer.
What I would like to do is automate this process by creating a batch file that will:
Open Command Prompt as AdminAutomatically enter specific commandsClose Command PromptRestart the computer
View 2 Replies
Jan 2, 2016
After latest W10 updates W10 computers can't see ANY other machines on my LAN.
2 Linux Machines, one W7, one XP and 2 W10 machines on a LAN.
Linux easily sees ALL computers and can access shared folders.
W7 and XP machines see All machines - Wndows and Linux. XP needs 128 bit encryption altered - no problem here though.
I've got both IVP4 and Ivp6 enabled.
W10 machines ONLY see their OWN individual machine -- nothing else -- not a sauasage.
The W10 machines can access PLEX and Logitech media servers running on Linux / Windows machines but the computers are missing.
Seriously MS Windows networking seems hosed up BIG TIME.
Note all these computers are on WIRELESS connections -- my Wireless speed is pretty good so not a problem for what I need.
C'mon ms - why is Windows Networking always a bit of hit and miss -- I've been using SAMBA on Linux for years and have never found any problem with Networking.
W7 is pretty good too (usually although I've had the odd rogue machine where networking seems to fail even though hardware and software is identical to another machine on network. W10 though while good in other things brings a whole slew of difficulty to networking. I shudder to think of what happens when I install a decent NAS this year.
View 3 Replies
Feb 10, 2016
From one of my Windows 10 machines I am unable to access the shared folders on the other. The troubleshooter says "One or more network protocols are missing on this computer" and "Windows Sockets registry entries required for network connectivity are missing."
I have run sfc /scannow, but no problems were found. I don't get the problem when sharing in the other direction or when accessing the shared folders on the same machine.
This comes amidst a cluster of sharing-related problems. Before the reboot after which the present problem manifested itself, shares going in the other direction were invisible in the network browser (but could be accessed via the search bar). Also, the machine in question does not appear in the HomeGroup browser even though it is a member of the HomeGroup.
View 3 Replies
Dec 1, 2015
I have a NAS (WD MyBookLive) which cannot be accessed in Windows Explorer on my brand new Surface by IP address (or name- though that doesn't work on any of my devices for some reason). I can access the config page in my browser by IP, and two other Win10 devices on my network can access the NAS by IP in Explorer fine, and I can access other devices on my network by IP fine on the Surface but for whatever reason only this computer can't access that NAS in Win Explorer.
I just got the Surface yesterday and was able to access the NAS fine, the only thing that's changed is I renamed the device and restarted and since then haven't been able to connect. I've restarted both the PC again and the NAS but no change.
View 9 Replies
Nov 26, 2015
Upgrading from win 8.1 Pro to win10. Seemed to be going well and then saw lost internet connection in systray. Troubleshooting came up with "windows sockets registry entries required for network connection are missing". I can connect to the internet but not to the LAN.
View 7 Replies
Nov 15, 2015
Problem trying to connect to internet on laptop, but all working as normal on desktop.
Investigations revealed....one or more Network Protocols are missing on this computer, also Windows sockets registry entries required for network connectivity are missing....this on both Ethernet and wireless but they had been working perfectly since the update last week.
My laptop supposedly required "Internet connections Package Version 3.0 Publisher Microsoft Windows."
After messing about for an hour without success I loaded the 1511.. ISO.. knowing that I could not connect to the internet to download anything, this seemed to solve the problem, (fingers crossed) I can only assume this made the internet connection possible.
View 9 Replies
Nov 22, 2015
I have a small network of computers and Homegroup is working a little to well. The network has had to have some changes, machines converting to W10 and changing names. The problem is there does not seem to be a way to refresh the Homegroup list of machines that have joined the Homegroup.
Or is there? do you know a way to display only the machines live on the LAN.?
View 4 Replies
Feb 10, 2016
I have two machines running Windows 10 "ermintrude and dougal" and I want my home folder on each to be shared with the other on my home network. dougal can see my home folder on ermintrude, but not the other way round. I have been through all the advanced sharing settings on each machine and compared them, and I have done the same for the sharing settings for each home folder, but I cannot find any difference between them. They are identical. Each is set to share as owner using the same Hotmail address as login and the same password. As I said, I cannot find anything different between the two configurations.
View 3 Replies
Jul 30, 2015
i've upgraded to Windows 10 (x64) from Windows 8.1.Using HP Probook 4540s..Before, i used Virtual Machine OK ( with Network: LAN, Wifi).But when Windows upgraded 10, i cannot use Network with any options.Check Device Manager - Driver Network OK.
View 1 Replies
