Networking :: Network Not Working For Online Games And Steam

Feb 3, 2016

I have changed my router. Is a 'FritzBox fon WLAN 7170'. First i connected, it was all good, i tried to connect to browser and it was good. Then i tried to connect Steam. "Could not connect to the steam network, either check your connection and click 'Retry' or start Steam in offline mode."I looked up for the probem, tried to:

- start the shortcut with -tcp
- turn the firewall off
- remove Steam from processes
- uninstall Steam and install it again.
- delete all files from Steam (without steamapps folder)

I tried other games online, they don't work either..I saw that video - Fritz!Box Firewall Port forwarding - YouTube (is 3:22 minutes long, if you want to watch it)I saw on the internet i can connect to the router settings with WIFI connection and i can't connect (CMD - ipconfig - Default Gateway in the browser).

Do i need to port forwoard all of them ?Is the Dynamic DNS the case?Why is the IPV6 with "No network access"? -Is the IPV6 important for online games?Do i need to set IPV6 ON?

View 5 Replies


Similar Messages:


Networking :: Work Offline / Online Button With Network Location?

Jan 28, 2016

I have a network drive, which I set up to save a copy of a folder for offline use using the instructions here:

Working with network files when you are offline - Windows Support

I am not able to find any option for setting the drive to work online or work offline. I did manage to set it up to work offline yesterday, but forgot how. Now, I cannot find any work online or work offline button. Is it in a different place in 10?

View 1 Replies

How To Get Games On Steam

Dec 28, 2015

I know nothing about computers other than how to get games on steam. WMI provider host is using 10-100% of my cpu. Can i just disable it, or do i need it for something? I end process, it starts again, people saying it might have something to do with CimWin32

View 1 Replies

Steam Xbox One Games From PC?

May 12, 2015

I had a question about windows 10 and the Xbox one. I heard you could steam Xbox one game's from the X1 to the PC. I was wondering could you steam Xbox one games from the PC ( using PC hardware ) and steam it to the X1 ??

View 1 Replies

Online Games Freezing PC

Sep 18, 2015

When play online games my pc freeze and only can i do is turn off pc.. Offline games not freeze.. i think that is problem of windows 10.. correctly ?

View 1 Replies

Steam Game Not Working

Aug 20, 2015

I've recently upgraded to Windows 10 via USB (using the download from the microsoft website onto USB and upgraded all my computers). All went well and smoothly, but unfortunately, when I went to start up Dota 2, my screens went black (as normal) but didnt load up the game. It seemed like it just crashes before it even loads anything. I thought that it was a bit weird, so i tried launching Garry's Mod, that did the same thing. I tried Warframe, as that opens a window before you enter the game, but that worked.

Not sure whats going on, heres my PC specs.

CPU - Intel i5 4570
GPU - GTX 780 Gigabyte
3 1080p monitors
Motherboard - Z87 Gigabyte (z87m-D3HP to be exact)

View 1 Replies

Networking :: Network Discovery Not Working?

Feb 10, 2016

I am facing a problem that my PC running Windows 10 cant see other PC's/Devices on my network.

Idk. if it have something to do with i cant make/join a homegroup.

I was told to remove a file in "C:WindowsServiceProfilesLocalServiceAppDataRoamingPeerNetworking" but the file was not there.

View 1 Replies

Networking :: Network Driver Stopped Working

Oct 5, 2015

i have a killer e2400 network adaptor over a wired connection on my msi motherboard. Unfortunately, out of the blue it has stopped working. I constantly get the error message "Ethernet doesn't have a valid IP configuration." I have tried a number of things such as stopping and restarting the services in computer management. Nothing appears to work. I know my router works as I'm using it now on another computer.

View 2 Replies

Networking :: Network Discovery Stopped Working

Aug 12, 2015

I know this problem has been discussed with many variants but not quite the same as I'm experiencing, so I'm starting a new thread.

I did a clean install of Windows 10 pro 64 bit, and everything was running perfectly, that is until two days ago when the computers on the network simply disappeared. I had done nothing with changes or new software or anything of that sort.

I checked network discovery and it was on, but the only computer showing was the home computer. I have tried turning discovery off then rebooting and then back on again and rebooting. In all cases the network drives are accessible. I have manually entered the computer name in the address bar of File Explorer eg "//COMPUTER2" and then I can go and enter the other computers manually. Everything will stay there until I close down File Explorer and then they disappear again only shown the home computer.

View 9 Replies

Networking :: Home Network Discovery Not Working

Nov 16, 2015

I just installed (yesterday) the latest W10 update that installed Version 1511 (OS Build 10586.3) and my home network consisting of five W10 PC's has been "destroyed." I do not use Homegroup. Instead, I have always set up all the drives/folders as shared on all the computers. That worked just fine until now! For some reason only one of the PC's is detected by the other PC's on the network. However, all the drives that I had previously Mapped are OK. Is there some new magic setting that I have to change to get network discovery working again ...or... is MSFT forcing me to use Homegroup?

A little more information to add to my confusion. I was wrong above - two of the PC's are shown in the Network on all the PC's. One of the five PC's, which I use as a home server, runs 24-7. For some reason it has all the other PC's showing under Network and can access all the stuff on all the PC's!! I know it used to take Windows a few minutes to find all the PC's on the Network but... all the other PC's have been running for many hours and nothing changes.

View 9 Replies

Networking :: File Backup Not Working With A Network Drive

Dec 29, 2015

I recently set up a Homegroup on a Win10 laptop so I can see another PC on the network. That PC is running Win8.1, and I would like to use it for file backup. The devices are visible on both ends of the network and have connectivity, but when I choose to use the File Backup function from the laptop, nothing transfers and eventually I have to restart because of no response from the system. Also, my browser will stop working. I have added the PC as a network location and specified the location for backup, but is has locked up twice now. Could this be a routing issue? I previously ran the auto backup feature to a memory card, but need more space.

View 2 Replies

Networking :: Host Network Working In Only Safe Mode

Nov 19, 2015

My windows 2003 server stopped working in normal mode, but working in "safe mode with networking" and giving reply from all peers, and reaching all remote locations. in Normal mode not even ping to peer and giving error "destination host unreachable". tried with new NIC. IP conflict coming when assigning used IP address, if giving a new IP address not even request going to peer showing the same error as "destination host un reachble".

View 1 Replies

Networking :: Modem Stopped Working - Network Signal Is Not Showing

Oct 20, 2015

I upgraded to windows 10 from 8.1, ever since then, my Huawei 173 stopped working. The led light flashes, yet the network signal is not showing, the display hangs and several other issue.

View 1 Replies

Networking :: WiFi Stop Working / Shows Only One Network And It Doesn't Connect

Feb 2, 2016

Product Name: Hp Omen 15
Operating System: Microsoft Windows 10 (64-bit)
Wifi card: Intel Wireless-N 7260

since some days my wifi has stopped working.If I click on Wifi icon it shows only ONE (max two) NETWORK:And I live in a building with 20+ networks, as you can see from WiFi Analyzer (I'm the red one on the right).If I deactive/reactive Wifi with fn+f12, it goes to Airplane mode and to Wifi mode again and it eventually shows all the networks/My Wifi is on the top. If it's saved, Windows connects to it and then it drops the connection; if it's not saved and I try to connect, it says "You're not able to connect to this network".The fun fact is that after some seconds every network disappear and only one is showed (probably the neighbour one..I dunno).

I've already tried to HARD-RESET the notebook keeping the power button for 10/15sec with the laptop turned off.I've already tried to follow these instructions [URL] ... updating drivers (Intel 18.12.0.3, 18.12.1.2, 18.30.0.9 [Windows 10 default], 18.32.0 [Lastest drivers]) with no success. Everytime I install a new drivers, I uninstalled the previous one + Wireless software + reboot.

I tried to uncheked "Allow this computer to turn off this device to save power" on my Wifi hardware settings without success.The HP Network support says I didn't choose a Wifi (Really? The problem is I don't see my Wifi on the list!).This is not related to a new Windows 10 upgrade since I've installed it months ago and It's the first time I've this problem :/ It always worked

I tried different settings too/I changed channel, I set 802.11g on my router, APSD off on the router.I set "Magic packet off, ad hoc QoS off, U-APSD off, fat channel off,incremental throughput off, HT mode off" on the card setting without success. Nothing chaned.The Hardware test doesn't detect any failure. If I go close to the router, it shows my network with full power connection and it connects to it. Then I go back to my bedroom (probably 3/4 meters far), it KEEPS the connection for 30/40min and It drops the connection and I can't reconnect to it anymore. It always worked perfectly in my room in these months (I bought it in March 2015), so the distance is not a problem, I'm 6/7m far from the router.In this case It shows my Network (Connected) and the neighbour network...and the other 20+ networks???

The only way I have is USB tethering with my Nexus 5.I tried the Wifi connection on Elementary Freya (Ubuntu linux based OS) and it shows 20+ networks available on the list. It has not connection problem with my Wifi, but sometimes it stops working, the webpages stop loading and I must reboot Wifi to reconnect to it (usually after 30/40min using it).What's the problem? Is my Wifi card broken?

View 1 Replies

Networking :: Website Is Online But Isn't Responding To Connection Attempts

Jan 30, 2016

I have restarted my pc at least more than ten times today so just i can connect for 10 or 15 minutes at once. this is the message from my connection trubleshooting: website (Microsoft Corporation) is online but isn't responding to connection attempts. Detected Detected.The remote computer isn't responding to connections on port 80, possibly due to firewall or security policy settings, or because it might be temporarily unavailable. Windows couldnt find any problems with the firewall on your computer. and this is another detail from the message:

Code:
Windows IP Configuration
Host Name . . . . . . . . . . . . : Lenovo-PC
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No

[code]...

I have tried resetting the internet through command prompt and by following youtube videos but it did not work. I've been having this problem for at least 2 days already.

View 5 Replies

Networking :: Unable To Connect To Internet After Automatic Online Update By Microsoft

Jan 13, 2016

After automatic online updates by MS the system was automatically set offline by MS!

Notes:

a) hardware is ok - verified by other OS

b) network connections were ok during automatic update and are still ok verified by other OS systems

c) the automatic update is the only change in the software

d) the only message was from MS browser "we are sorry you are not connected to Internet"!

Questions:

(1/5) What can be done ?

(2/5) Windows 10 advices to use online support in the situation MS update set PC offline, why ?

(3/5) How can one use online support after having forced to offline ?

(4/5) Is there any way to prevent Microsoft update to modify network drivers / drivers is general ?

(5/5) Why did the update by MS set the system offline after having completed its operations!

View 2 Replies

Video Player No Longer Working - Cannot Watch Online Videos

Aug 17, 2015

I am not able to watch any YouTube videos or videos on other sites. Sound is good but screen is a wavey green colour. This wasn't an issue before I upgraded to Windows 10.

View 1 Replies

Steam Chat Not Working But Skype / Origin And Even Xbox Chat Works

Oct 30, 2015

I always use steam chat with friends and can not play without it since Cs go uses the default steam chat microphone. I use a Logitech G930 USB headset that has worked in the past, but after the 29th of October everything went downhill. List of "Solutions" I have tried: (I'l try and update it)

-Uninstalling steam/reinstalling
-uninstalling mic drivers/Logitech software and reinstalling
-changing default mic to the G930
-Restarting router (80mbps speed so band with is not an issue)
-Restarting computer (Duh)

View 1 Replies

Networking :: Find Network DVR In Network And Sharing Center?

Oct 1, 2015

How do I find my network DVR in Network and sharing center?

View 4 Replies

Networking :: How To Rename Network 2 To Network 1

Sep 5, 2015

Just upgraded to Win 10 and kept losing internet access. After troubleshooting my home network is now named "Network 2". How do I change the name to "Network 1 "? 

View 3 Replies

Sound Not Working In Some Games

Apr 2, 2016

So I recently installed GTA 5 through Steam and started playing it with no audio issues, however for some reason now the sound does not work at all when it loads even though I didn't make any changes to my computer or install anything that may have caused an issue.  I looked up the problem online and many people have the same issue but most of them seem to at least get sound during the loading screen, I don't have any sound in this game at all now.
 
I also had the same problem with World of Warships, one day the sound just stopped working. I tried playing with my playback devices, turning off the 'allow programs to take exclusive control of this device' for all the devices, reinstalling my audio drivers, direct x and now I'm pretty much out of things to try. Other games in Steam still work fine with no audio issues.

View 3 Replies

Networking :: Can't Connect To Network

Dec 4, 2015

Today, while having lunch at my favorite restaurant, I tried to connect to their WiFi network as I usually do. I got the following message:Checking network resources.And then, after a few seconds: Can't connect to this network. My obvious question is, why not? To begin with, was it something wrong with my computer, or something wrong with their network?

For example:

DHCP server did not respond
DHCP server did not issue an IP addressStored password incorrect; enter new password: _________
WiFi adapter card not respondingInsufficient virtual memory

But no, none of that useful information was offered. How am I supposed to fix the problem?

View 2 Replies

Networking :: Connecting 2 PCs Without Network

Mar 5, 2016

I have a desktop PC running Win7 64Bit Ent. It's not actually in use, so nothing is connected. I also have a laptop running Win10 64Bit which I'm using to type this post. I have some audio files on my desktop that I'd like to pull off of there, and put them on my laptop, and then maybe on a cloud. My 1st question: Is it possible to simply use a USB cable between 2 USB 3 ports if I simply power up the desktop with the USB cable connected? Does the USB protocol provide for me to see those HDD's on the desktop via the laptop? I'm quite limited for physical space, and I don't need the desktop to be running permanently, I just need to get these files off of it. If that's NOT a solution, what is the next easiest method?

View 6 Replies

Networking :: Network Security Key

Dec 16, 2015

I have forgotten my network security key, all of the info I find points me to connections, wireless properties, etc..... This does not match my updated Windows 10. What is the procedures for the latest updated Windows 10?

View 1 Replies

Networking :: Can't See Other Computers On Network

Jan 4, 2016

I have two Win 7 computers on my wired network and 6 Win XP computers on this same network. This main computer was Win 7 and just upgraded to Win 10 in November. For a year this network has worked just fine, plug and play basically when I set it up, now after Christmas shutdown (2 weeks), I can't see any of the computers on this network. The only thing I can see is the media drive on a computer called 6Head2. All I really do is transfer files from this main computer out to those 8 other computers.

What is wrong with my computer? Network discover, file sharing all checked, network location was changed from Public to Private today by me. But it did work last year, even with the network location being public.

View 2 Replies

Networking :: Can't Access Network

Jan 10, 2016

I have a home network that includes-Two Windows 7 PCsTwo Linux machinesA Brother MFC7820N networked multifunction printer..All the above are on wired connections. Then there's an 802.11n wireless link for laptops and media devices.I'm just setting up a new machine that's running Windows 10 Home, using the wireless network. I was annoyed to find that Brother don't have a full-function Windows 10 driver for the 7820N that supports scanning, but the Brother site says the built-in drivers in Win 10 should work for basic printing.

Problem: I successfully added the printer device to Windows 10 (at the 3rd attempt) using the "manual advanced" method. The printer has an entry in the hosts file, and was added by host name.The printer fails to print, with a "not responding" type message. The driver also can't pick up the status info from the printer.

What's really weird is-I can ping the printer from the W10 box (and the other machines) by either IP address or hostname.However, this printer has a web interface. I can access this from any of the Windows 7 machines, but the Windows 10 machine says "web site failed to respond" or somesuch. This happens with any of: Edge, IE11, or Chrome browsers.I can't even make a manual connection (telnet to port 80) from the Win 10 machine (timeout).The Windows 10 machine CAN access all the other devices on the home network, including the web servers (Apache) on both the Linux boxes.

This looks like the web access to that particular address is being blocked somehow. I have tried disabling my AntiVirus package (Kaspersky), but that makes no difference. Is Win10 perhaps detecting an "old" web server on the printer and refusing to talk to it? (and why would that prevent printing using lpd?)

View 9 Replies







Copyrights 2005-15 www.BigResource.com, All rights reserved