I have no wifi after upgrading to Windows 10 from Windows 7. Looking at Device Manager, I believe my Network Adapter is Intel(R) 82578DC Gigabit Network Connection. Looking online, I do not find a driver for Windows 10.
View 4 RepliesI upgraded my friends HP laptop to Windows 10. The issue now is I can't enable Wifi. The card is recognized correctly in Device manager and no issues is found with it. It looks like it is fine. However in the Network Settings WLAN is set to "Off" and when I try to turn it on it always jumps right back to off. eg. I can't enable it.
HP clearly state any laptop bought prior to specific date in 2013 will not get any driver updates from their side for windows 10. And updating through device manager only tells me it's the newest driver available.
The Wifi card i Broadcom 4313GN card. I searched for win 10 drivers but did not find anything.They only offer linux drivers on their homepage...
So any solution to the issue or link to a win 1' driver for this wifi card?
I have a Chuwi Hi8 tablet. Yesterday I upgraded the preinstalled Windows 10 RTM to the latest build 10586.104 and got the well-known Wi-Fi Not Available problem.
When I open the Device Manager, I see no problems with the installed hardware. Windows reports that all drivers are installed and work correctly. The same concerns the Broadcom 802.11n Wireless SDIO Adapter.
The website of the device (URL...) does not work a lot. They do not provide a driver package I can use to reinstall the drivers. I even can't register on their forum to request the driver pack.
I upgraded mu Alienware M14 from 7 to 10 using the Media creation tool, and now have no WiFi. Ethernet and Bluetooth both show fine, and a wired connection works perfectly, however, not being able to use WiFi puts a damper on the portability of said laptop.
I've tried the reg delete method, which informs me the key is not found, there was no VPN software installed. I do show a network adaptor under unknown devices, but no matter which driver I choose, it is unable to start. Short of a clean installation, and the loss of personal files and/or hours restoring them or reinstalling.
I upgraded from windows 7 to 10-when finished there was a red cross through the wifi icon.Having read numerous forums,I established that there was no old VPN software;I updated the Broadcom 802.11b/g/n software and in network adapter properties,I unticked power management switching off the adapter;also,altered bandwidth to 20_40MHz.As soon as I clicked on that,the wifi switched on!It then works until the computer is switched off;when on again,same problem.If I go to network adapter properties,and disable and then re-enable the adapter,wifi comes on again.
View 7 RepliesAfter the upgrade I performed a "Reset this PC" with "Keep my files". Periodically the WiFi will die. No networks will appear in the list in the pane which appears when one clicks the icon at the bottom right.The fastest way to fix it is to click the left-most button twice, which seems to disable/re-enable and automatically reconnect to the network. I have checked the router. The problem is not manifesting on another Lenovo laptop upgraded the same way. I am using the latest available network driver.So far I haven't performed a clean install due to the time it will take.
View 1 RepliesI have my laptop at work and have had no trouble connecting the company WiFi (they have Guest WiFi and a WiFi where you need to enter your company provided Username and Password). I have been connecting using my Username and password. Today I had to change my company login password. Now when I try to connect my laptop I get a "can't connect" message because the password saved in my laptop is no longer valid. But I can't find a place in Win10 to enter my new password.
I remember the first time I logged onto the company WiFi a Windows popup came up asking for my Username and Password (which was saved so I didn't need to enter it again - until now). This time not getting the popup - it just says "can't connect".
Running Windows 10 on a Dell Latitutde I was trying to setup a Netgear Wifi Extender because the Fios Router does not reach all the way to the other side of the house. I did the setup (so I thought) the way the manual told me and my computer was trying to connect to the extender, but it just stayed in "Connecting..." For a long long time. Eventually I gave up and thought I'd hit the reset button on the extender and try again.
Now my wifi adapter finds NO networks. All my other devices see all the networks.
The only other time this has ever happened I had accidentally hit the network adapter switch on the side of the PC, so I'm 100% sure that's not the problem and that it is 'on' in the settings. I've tried restarting the pc several times as well as toggling the adapter on/off, airplane mode on/off, and the switch on the PC on/off.. And it still sees no networks..
I have just replaced my WiFi card from (BCM943228HMB) to BCM94352HMB. Before replacing my WiFi card i done the following:
Made computer boot in safe mode with networking.
After that i replaced the card, then booted into windows 10 (safe mode with networking) and checked device manager. Everything was OK (See attached picture). I then tried to turn on WiFi, but it does not turn on.
I have internet service from AT&T which worked great until I updated to windows 10. My pc now connects to the wifi just find, I can download updates, but I can not browse a web page. When I go into open a web page I get an error that the page can not be displayed. If I vpn to my work it works just fine then. I have reset the browser settings, created a new account on my pc and nothing has worked.
View 6 RepliesAll of a sudden I get "your device does not support Miracast" and wifi is gone !
I don't want Miracast.
Acer Laptop;was win 7 on it had upgraded to W 10 Pro and was using wifi until now ?
i have tried connecting to my school's apartment however it always goes to no connections are available and then airplane mode and shows connections are available. the Wi-Fi connects just fine in all other areas of the school byt not in my apartment. The apartment is located inside the school and there are a couple of access points. I can connect to my friends Wii-U just fine but not my laptop? And when I troubleshoot, it says "Problem with router or access point.
View 1 RepliesI've installed windows 10, but I've got a strange problem. My WiFi connection randomly gets limited for one second. It isn't so bad, when I'm browsing, but if I wanna download something... that's terrible :S 'cause when the wifi stops, the download stops too... What can I do? I think it's not my laptops problem, because before win10 - on windows 8.1 - it worked fine. If it matters something, it gets limited in about every 5 or 10 minutes.
View 9 RepliesI was wondering if it's possible to utilize both WiFi and ethernet in tandem. I'm pretty sure some of you are going to tell me that I can only access the internet through one of these, up to my bandwidth limit, but that's not what I mean.
I'd like to access the internet through my WiFi connection, yet have a wired connection through my router to access the files on the other computers in my house.
I have a brand new MSI QE62 apache pro, and I just installed an update to windows 10 (the computer came with win 10, so i cant revert back to 7 or 8) and after the update, I no longer have a visible wifi adapter in my network settings, and i obviously cant connect to wifi as a result.
View 2 RepliesTitle says it all.
View 5 RepliesSince I updated to windows 10 I cannot get my laptop to connect to the wireless network. The network shows up as available but when I hit connect it says "cannot connect to this network". When I run the troubleshooter it give me the error 'problems with wireless adapter or access point - not fixed'. I have restarted the computer and the router and made sure the drivers are up to date.
View 1 RepliesI upgraded from W8 to W10. I have Acer V17. For few weeks, everything seemed to be ok... And then, one week ago, I restarted my computer, and I think I saw some actualisation being installed (I thought I turned them off, but I probably did not...). Since that moment I dont have WIFI. And I mean no WIFI at all - my network center says, there are no WIFI networks to connect to.
But that is not true, because on my phone and other devices, there are WIFI networks. I tried to google the answer and tried few things, but nothing works. In Device manager, my WIFI adapter (Qualcom Atheros) ha yesllow exclamation mark, but when i try to update the drivers, it says, they are up to date... but the exclamation mark is still there, an I have no connection. I am completely hopeless, because I need WIFI for my job. I really hate the moment I decided to upgrade this system.
My PC would be connected to WiFi, but I wouldn't be able to go on any site. I restarted my PC and the damn thing locked up on the HP logo screen! So I had to hold the power button to turn of my laptop.
View 1 RepliesI don't really know how to say this but my wifi wont turn on, when I diagnose the driver it says I need to turn the wifi button thing on but this laptop doesn't have one so how do I enable wifi without the button
View 9 RepliesSometimes when I'm gaming online my connection gets lost and my wifi gives me no internet signal but there is internet on my other devices, I solve it by clicking on airplane mode twice (on and off again ) then the Internet comes back . Is there a permanent solution to this ?
View 1 RepliesI purchase my laptop last March and was running 8.1. I upgraded to 10 and am now having issues with wifi being connected and then losing wifi connection for only outlook and micorsoft edge. I can still access the internet through chrome or internet explorer. I have call Microsoft twice and they have not corrected the problem. I took the laptop back to Micro Center and they could not find any issues. The first session with Microsoft the technician removed some temp files and ran a malware program, which seemed to fix the problem, but the fix only lasted an hour or so. Wifi will come back by waiting for a while or by shutting down or by signing out and signing back.
View 5 RepliesThis just started happening only a few days ago, I'm not sure what might have caused it, but my laptop will suddenly disconnect from my wifi network. sometimes it won't disconnect, but just stop receiving/sending packets. I can tell this because suddenly my pages are stuck loading and skype is trying to reconnect, but nothing happens until I manually disconnect.
I have tried Troubleshooting. But I usually get "Your proxy setting could not be recognized" or something, even though I don't have any proxy settings.Uninstalling and then reinstalling the latest driver for my wifi card. Disabling power saving for the wifi card as talked about here. Everything mentioned on the Microsoft page here
Ethernet works fine. I can connect my phone to wifi and tether it to my laptop, so this shouldn't be a problem with the router.
I don't know how it happened, but for some reason the wi-fi icon on my Acer laptop is now greyed out and when I click on the internet icon to display available connections, there's nothing there.
I'm attaching a screenshot ...
I've been trying to make a PE image and it is working fine. I can add programs (Macrium, PaleMoon, Explorer++) and it works fine in VM (through virtual Ethernet). It also works booting it from USB.
What I can't do is make WiFi work when booting from USB. I need this as I don't have Ethernet at all on my laptop.
I've tried adding the various drivers but can't get it to work.
This is what I have done so far for WiFi:
Code:
# Add any device drivers (.inf files) - this folder contains BroadcomWirelessWin8x64
Dism /Add-Driver /Image:"$WorkDirmount" /Driver:"$HomeDirDrivers" /recurse
# For Wifi - http://www.msfn.org/board/topic/162453-winpe-40-enable-wireless-support/
Dism /Add-Driver /Image:"$WorkDirmount" /Driver:"$env:SystemRootInf
etnwifi.inf"
Dism /Add-Driver /Image:"$WorkDirmount" /Driver:"$env:SystemRootInf
[code]....
I purchased a new computer running Windows 10 (build 10240) today and have set up the windows. However, it will not allow me to connect to my WiFi. When I use the network option in the task bar, no wifi networks are shown and it says that there are no connections available. When I access the network settings, where the different sections are listed on the left-hand side, WiFi is not an available option.
Updating drivers Deleting drivers and then allowing the computer to reinstall A few different command prompt methods such as resetting the TCP stack, as well as trying some that were for people who upgraded from windows 7/8.