Networking :: No Wireless Networks Found After Update To 1511
Nov 29, 2015
I just updated my media center to version 1511 of windows 10. Via wifi, downloaded and installed ok i thought. But have found i cannot see any wireless networks. Normally about 7 up in my area.
I've tried uninstalled the device and installing it again.
I've tried checking for newer drivers, but isn't any.
I've tried resetting these in command prompt (admin) net sch advfirewall, int ip, int ipv6, winsock and rebooted afterwards.
I've tried plugging the usb wifi adapter into a different usb port.
I've tried restarting the Router. Mobile phone picks up wifi in the same room.
I have a Surface 3 Pro with 2 external monitors hooked up using StarTech USB VGA adapters. Since the update, my mouse does not show up on my remote Windows Server 2008 R2 VM's when the Remote Desktop window is on one of the external monitors (works on the Surface Screen). The cursor is there, just cannot see it.
my laptop recently did automatic updates and I have been having problems with the WiFi. When I first turn it on every thing is fine, but after about 30 minuets or if I shut the lid and it goes to sleep the WiFi just does not work anymore. I have to go to my network adapter and run the trouble shooter which finds the Windows Wireless Serves is not running on this computer. It starts it and every thing is fine for another 30 minutes or until I shut the lid again. I have looked in services.msc and WLAN AutoConfig is running and set to automatic. I have tried uninstalling and reinstalling the driver for my wireless card.
Yesterday I updated my PC from Windows build 10240 to Windows 1511, but after that I can't connect to WiFi.
My wireless adapter (which is built-in the PC) doesn't find any routers...
When I try to search the solution with the Windows tool, for some minutes it finds the routers again, but if I try to connect to someone, after few seconds it disconnect automatically.
I tried to reinstall the drivers, but nothing changed..
There are a few networks I cannot connect to and I'm not sure why. Most networks like the one I have at home, I am able to connect, however when I am at my friend's house or some cafe, it doesn't let me connect to the internet. I tried updating my drivers and it still doesn't connect. It was able to connect few months ago when I had windows 8.1 but when I upgraded to windows 10, I started facing these problems.
It doesn't tell me what to problem is either. It just says "Cannot connect to network"
I am connected to a wireless network but the connection is not showing on the Network and Sharing Center active networks. Also, I am unable to change my Network Location from Public to Private as there is no link on the Home-group page. I upgraded from Win 8.1 to Win 10 and already updated wifi drivers.
I can't change my profile location to private, and I can't make my computer register that it's connected with either my WiFi or my Ethernet. I've looked through the steps posted here, but to no avail. I don't even have the NetworkList key in my registry! I am online with Firefox and Chrome just fine, but Edge won't connect, nor can I connect to the Store. I did a wipe and reinstall a few days ago, partially to try and resolve this issue, and partially to resolve some other issues dating back to the Insider builds, but this problem is still happening. I'm at my wits end, and I can't even connect to my wife's PC to transfer files. I've enabled network discovery and file sharing on public networks, but that didn't even make a difference. Also, since I reinstalled Windows, I've been unable to activate it, but I think that is tied to this network problem. It's like all the new apps and features won't recognize the connection. I'm not running any security software besides Windows Defender, so that shouldn't be an issue.
Ever since the 1511 update last week, my SP3 display adapter crashes all the time. For example, if I'm using Windows Live Movie Maker, it will crash after only a few seconds of playback, then I have to close the app and reopen it, so I can get another 30 seconds of work done if I am lucky. If I'm using Blender or Repetier Host, it does better - lasts minutes instead of seconds, and doesn't always crash in those apps, but it does occasionally.
When I try to print to my 3D printer, it crashes sometimes, wasting plastic. I can get around that by doing the print from SD, but sometimes when it is something small, it's just easier to print from the host. Having increased problems (I used to get it occasionally, but not often) since updating to Win10 version 1511 last week?
I can logon without problems to WiFi networks where I provide a passphrase/password to the Wifi-point. This is the case at home and at friends' and family.I can also logon on to public WiFi networks such as on trains, hotels, restaurants and what not. Some of these are like the situation described above, some are hotspot like.Where I run into problems is in corporate network situations. I'll have been provided with a UID and Password (which work, I verified them on my smartphone), see the WiFi signal I am to log on to and what is supposed to happen is:
After I have made the connection to the WiFi spot, my browser is to open automatically and bring me to a URL where I can enter the UID and Password after which I'll be connected. This does not happen. ORI should open my browser and attempt to access any url after which I am guided to a URL where I can enter the UID and Password
I'll see the WiFi point, make the connection, the browser does not open automatically and when I open it myself and try a URL (e.g. CNN.com), instead of requesting a UID and Password I just get the error 'server not found'...
When I initially installed Win10, it logged in with lightning speed (from the lock screen). After the update last weekend it takes longer to log in than it did with Win 7. or 8. How to speed up login time?
I'm running Version 1511 (OS Build 10586.3), 64 bit
I have been trying for a full week now, to no avail. Whenever I apply the update, it goes to the "Restarting" screen...and gets stuck there indefinitely. Even after a few hours, it's still on that screen. So ultimately I have to force shutdown my PC (after which I can use it as per normal). I also do not believe I have any malware on my PC (have scanned multiple times with Kaspersky just to be sure). I had updated to Windows 8 > 8.1 > 10 on this same PC before and never faced a single issue. I also never mess around much with default system settings.
In Windows 7/8 there was a setting, a small checkbox "Treat all future networks as public and don't ask me again".
You can see it in this picture - [URL] .....
In my version of Windows 10, I don't appear to have that option. I could try deleting this registry key ...
HKLMSystemCurrentControlSetControlNetworkNetworkLocationWizard Delete the key: HideWizard
Perhaps there's a simpler way than export, delete key, if wrong result import saved registry file. Have I missed a setting somewhere to set the network location?
How to configure my Win10 to automatically connect to multiple wifi networks?
I have wifi at home so when I get to the office I have to configure the "manage wifi settings" on my laptop, click "forget" my home wifi, and manually enter the office wifi password. I repeat the same process when I get home from the office or use the wifi in my brother's house. I had this on my Windows 7 but can't figure out how to in Win10.
Settings > Network & Internet > Manage Wi-Fi Settings
Here on Microsoft Support page, there's a tutorial on how to "turn off Connect to suggested open hotspots and Connect to networks shared by my contacts"
Configure telemetry and other settings in your organization (Windows)
I used the exact code mentioned there:
REM Disable Wifi Sense REG ADD "HKLMSOFTWAREMicrosoftWcmSvcwifinetworkmanagerconfig" /V "AutoConnectAllowedOEM" /T REG_DWORD /D "0" /F
But the above code only turn off "Connect to suggested open hotspots" and not "Connect to networks shared by my contacts". How can I turn off "Connect to networks shared by my contacts" via registry?
Is there a way I can change all connected networks to private instead of public with a click-able script? The problem was that a User was connected to an open network using a VPN which then also connected showing Public. With both as Public, they could not map to a network resource. I fixed it using the "go to home-groups and change network settings, etc." But surely there is a way it could be handled with a simple script to edit same? End result was the VPN showed private while the open WiFi he connected to still showed public but he could access the server now.
I've recently upgraded my home PC from Windows 7 to Windows 10. I've been using a Realtek USB Wi-Fi adapter to connect to the internet. After installing the new OS and running it for the first time, I couldn't connect to my home network.
After reinstalling the drivers supplies by the manufacturer and reattaching the adapter, I attempted to again connect to the network. The "Verifying and connecting" message displayed, but after closing Settings and returning to the same page, all of the Wi-Fi settings have disappeared, like the drivers have crashed.
I updated to windows 10 and I couldn't find any of my files. Eventually found them moved in a folder. Once I restarted my computer, all of the files were gone and I had more storage on my computer. These are files as in music, movies, and pictures. They are NO WHERE to be found.
Yooooo! I have a Lenovo Y510p with modified BIOS so I could replace the crappy Intel wireless card that came with it (Intel Centrino N2230) for an Azurewave - Broadcom 4352. The experience has been good so far, the only problem I'm having is the low wireless signal with the card. I have other laptops that have higher range and strengths on the same place with older cards.
I've tried verifying (and even swapping) the cables and noted no difference. I asked on another forum and they told me that it could be that the card is not receiving enough power, but I have yet to find a settings in the BIOS or in Windows that dwindles its performance. I have recently updated the driver from Lenovo's website and it didn't improve a bit. How to improve the wireless signal?
Installed the windows 10 preview on my IMac a while back and was upgrading fine and then it stopped updating as the updates would fail constantly, and now my IMac is still on build 10162. It was running fine but the time has come and my computer will be rendered useless in a matter of days(your pc will restart every few hours and will eventually fail to start if you don't upgrade to the latest version)... Windows update doesn't detect any updates, the preview builds option in settings is completely GONE and there is no way at all to update (at least not without losing everything i guess ) How can I upgrade my computer to the final version of windows 10 and keep all my data?
I have two computers, both run Windows 10, One runs Pro and the other Home (odd considering both were free upgraded from 7 Pro, but that is a currently unanswered for 2 month question for Microsoft to resolve...). Onto business, my main PC (Triton hereon out) spontaneously throws the 0x80070035 (network path not found) error. The other PC (Prometheus) is always on, its always connected. To add insult to injury, there is nearly always an open VNC connection (Prometheus runs headless, no monitor, hence VNC), so I know the computer is connected at all times and it is at least visible in one way as the VNC connection never drops. This problem has been going on since I got the free 10 upgrade. Both previously used Windows 7 Pro and had no connection problems with each other.
So here is what I have tried so far. - Enable NetBIOS over TCP/IP - Restart both PCs - Exit homegroups and make a new one - Uninstall VirtualBox incase it was trying to use its (VirtualBox) imaginary network on both machines (both are now running it again though after it didn't work) - Disabling / exiting VNC Viewer/Server on both servers before connecting
The only odd thing I have noticed is my router/modem in one has six IPv6 addresses for Prometheus, whilst Triton only has two. Both have one IPv4 assigned, see this image for info. If it matters, I connect to Prometheus via VNC by name 'Prometheus' instead of its local IP. Incase Windows does it a different way? remember this is spontaneous, sometimes (i'd say about 30% of the time) it connects and I can view and copy/edit Prometheous' files no questions asked, the other times it will throw this error but after a few tries it will let me in.
I have just bought an HP laptop running windows 10. I cannot connect to internet wirelessly as when I select my network connection it requests username and password. (Screen shot attached)I only have a network password for my connection and have never had or been requested for a username.
We have a couple of laptops at home and they connect with password only no problem. It is only this laptop that requests both. I can find no way past it and cannot connect. It connects via cable fine but thats obviously not ideal for portable laptop.
We have a new (albeit old) wireless printer (HP Color laserjet CP3525) with a wireless adapter card. Computers running Windows 7 or Windows 8 could see the network and connect. All computers could then print to the printer. None of our computers running Windows 8.1 could see the network. I upgraded one computer to Windows 10. It can now see the printer network but cannot connect.
When I first installed Win 10 it was working great got my wifi connection working and everything now it seems I cannot get connected. I have tried several times, putting it mildly. I put in the Modem/router address and password and then I go to the site that shows you the wifi connections and mine is not there. But there are about 10 or 12 that are there. I have tried this several times like I said. And I have rebooted to see if that did anything and it made no diff.
It seems from some of the reading I have done this might be a problem caused by an update. It worked great for several days. And while I am thinking of it can you delete all those other wi fi addresses some how.
I was unable to connect to an older (backup) AP in Win10, but Win7 and my phone, tablet etc could connect no problem - these were connecting using WPA-TKIP, but MS now only allows WPA2-AES
So MS have removed the less secure WPA-TKIP protocol from W10 (this apparently started in W8), but they have left the even less secure WEP protocol in place!!!
I have now connected using WEP - on my router you can use a passphrase to create the hex pairs for the key, but you need to enter the actual hex characters as the key (eg 13 hex digit pairs = 26 characters to enter)
Looking at the wlan profile from the command line interface shows what the settings are...
netsh wlan>show profile plusnet2 Profile PlusNet2 on interface Wireless Network Connection 4: ==================================== Applied: All User Profile Profile information ------------------- Version : 1 Type : Wireless LAN Name : PlusNet2 Control options : Connection mode : Connect automatically
