Networking :: No Internet Connection Via WiFi Or Ethernet
Nov 10, 2015
My laptop is for some unknown reason not connecting to the internet via wifi or ethernet. It will also not diagnose the problem as it says The Diagnostics Policy Service is not running and it cannot fix it.
There is 2 computers and 2 virgin superhubs in the house i live in (not both mine) both ethernet connected. Occasionally i have to unplug my superhub and connect my desktop computer to the Wifi on the other hub which is in the next room.My computer obviously "remembers" the password for the wifi and i used to be able to just unplug my hub and it would automatically connect to the wifi without me having to do anything.
Since switching to Windows 10, when i unplug my hub, it says that it is connected to the wifi however it says "limited" and no websites work, effectively not connected even though it says it is.To solve it i have to leave my hub unplugged and restart my computer and it connects instantly and works. Whilst that isn't a huge problem, i sometimes could do without having to save what i'm doing just to restart the computer as i have never had to do this before.
The same problem also occurs in reserve if you get me. Disconnecting the Wifi and then plugging in the hub, it also says limited connection until i restart the comp. Virgin Media have been of no support whatsoever, to be honest I didn't expect them to be as it seems like a computer/windows problem.
After the free upgrade all worked properly, then i did a clean install (format) with a bootable usb that i made from media center. 6 days now no Internet connection, no wifi option. I think its the common problem with Wifi on Wos 10. As you realize i have only the windows files in my hard drive, the driver for my wireless adapter (Airties 2410) and the intel management center driver. I tried everything from the many possible solutions but not luck for me, even installing older drivers for my wireless adapter.
There is 2 computers and 2 virgin superhubs in the house i live in (not both mine) both ethernet connected. Occasionally i have to unplug my superhub and connect my desktop computer to the Wifi on the other hub which is in the next room.
My computer obviously "remembers" the password for the WiFi and i used to be able to just unplug my hub and it would automatically connect to the WiFi without me having to do anything.
Since switching to Windows 10, when i unplug my hub, it says that it is connected to the WiFi however it says "limited" and no websites work, effectively not connected even though it says it is.
To solve it i have to leave my hub unplugged and restart my computer and it connects instantly and works. Whilst that isn't a huge problem, i sometimes could do without having to save what i'm doing just to restart the computer as i have never had to do this before.
I have a odd bug which is causing some of Windows 10's Features to not work. I am using an Ethernet cord, I can still connect but in the bottom it's showing Limited connection and when I click on it, It's showing No Internet and nothing is popping up.
So for about 2-3 months I've been running hardwired Ethernet internet instead of wifi. I keep my Dell plugged into my tv. The other day I tried to move it and use wifi in another room but I have no option. When I first started with Windows 10 on release day I was using wifi with no problems and when going the Ethernet route it was always plug n play when you going to wifi vs wired.
1. Even after unplugging the Ethernet cord the symbol doesn't change to a wireless symbol the Ethernet symbol just has a little red box. 2. Tried turning airplane mode on and off as well as full pc reboot 3. Right clicking internet from the bottom right of the screen image and clicking open network and sharing doesn't give any wireless options 4. I've tried troubleshooting also with Ethernet unplugged and no success.
So just to repeat Ethernet works perfectly. Wifi used to work. My roommate who also is running the same version of Dell wifi works perfectly. Same account and everything.
The only thing I can think of is the pc updated one day as I have automatic updates and it wiped the driver maybe.
I was wondering if it's possible to utilize both WiFi and ethernet in tandem. I'm pretty sure some of you are going to tell me that I can only access the internet through one of these, up to my bandwidth limit, but that's not what I mean.
I'd like to access the internet through my WiFi connection, yet have a wired connection through my router to access the files on the other computers in my house.
I have a problem with my internet connection. First, I've tried a PCI Wi-Fi card and a repeater and nothing change.
My computer have a problem with the internet connection. When I play games like Counter-Strike, I'm spiking and I have some rollback every 5s. Here's a picture of my internet connection in the task manager:
As you can see, I'm spiking alot. Sometimes, my PC disconnect from the router (even when it's wired).
What I tried: - Recovery - Flush DNS - Renew IP - Uninstall/Install network drivers and adapter - Uninstall/Install general drivers
And... nothing worked, except one thing: Fix network connection issues - Windows Support
Type netsh winsock reset and press Enter. Type netsh int ip reset and press Enter. Type ipconfig /release and press Enter. Type ipconfig /renew and press Enter. Type ipconfig /flushdns and press Enter.
It's working for like 30 minutes and then I'm spiking and lagging again. I suppose it's a DNS/IP problem. I need to do it again every time I want to play 30 minutes.
PS: When I'm browsing on chrome, I don't see the spike effects, only when I play or skype.
So I've got a simple question really when a laptop is connected to a WIFI network then a Ethernet connection is plugged in which one will it use as priority?
But I'm currently browsing the internet and typing to you.
In fact - I can do virtually everything (League; Steam; Skype; etc) except use any OS feature that requires logging in - e.g. Mail, User Accounts, Shop, etc. Then it says something along the lines of "Cannot use this service without an internet connection - please connect and try again." When I run Network Diagnostics as the prompt recommends - it says I am connected and cannot find a problem.
It doesn't always happen - but it seems to be determined on start-up. If I restart it now it might be working next launch - but 75% of the time it will encounter the same issue. It's been happening for months now but I've sort of gotten used to using my phone to check my emails - but I've now encountered an issue with one of my hard drives being unable to be searched (tried indexing, etc) and the only step I've found that I haven't tried says it could be a corrupted user account - but I cannot update my user account without "connecting to the internet". -_-
The system is up to date. No driver updates available.
I have a kind of big problem with 10 Pro. My problem was "ok" in 8/8.1 Pro. As title says, I would like to give WiFi priority over ethernet. Why ? You may ask, I'm using laptop as a hyper-v machine ( prepare migrations from 2003/2008 to 2012 and others IT Admin things ). I know where to change priority but Settings aren't saved. Even after setting WiFi on top of ladder, after going to the settings again it's 3'rd. That way I have no internet connection because of my VM Networks and their DNS settings.
My desktop is connected to my router by Ethernet. However, the printer I use is in my wife's office on another floor. It is a wireless Epson Artisan 730. I have added a Dlink DWA-171 wireless usb adapter to my desktop to print wirelessly to the Epson.
However, every time I want to print, I have to disable my Ethernet connection so the WiFi connection will see the printer. Then I'm done printing and I re-enable the Ethernet (faster, more stable).
Initially windows 10 was running fine until suddenly (I'm using Chrome) errors such as "DNS_PROBE_FINISHED_NO_INTERNET" started occurring, while periodically the wifi kept disconnecting . After searching for and following some solutions this issue was fixed however now the internet is very slow. Admittedly I'm not technically adept at all however I believe something I changed may have made the wifi slow. I did the following things:
- Cleared chrome's cache - Changed the DNS to google's 8.8.8.8 and 8.8.4.4 (which I am currently using) from the default (IPv4) - Tried to update network adapter drivers (said there were no new versions when using the 'automatic search') - Used cmd to run commands such as "ipconfig /flushdns" - Tried performing a clean boot - Also followed these instructions [URL] ....
On [URL] ... download speed is 0.39mbps. Upload speed is 3.75mbps. Ping is 8ms. I use fibre so previously it was very fast.
If this problem can't be resolved I'll just have to go back to windows 8.1, the internet is unbearably slow.
I have been using a wireless connection but have decided its better for online gaming if i go wired/ethernet.
I am having a problem "unidentified network/ No internet access"
Now in the past with an xp pc i connected the ethernet cable and that was it i assumt there is some sort of set up i need to do for win10?
Also it may be worth letting you know i am not directly connected to the router via an ethernet cable, i am using the plug in things that sends the signal down the house electrical wires. Maybe this is an issue although it wasnt on my xp pc.
My PC would be connected to WiFi, but I wouldn't be able to go on any site. I restarted my PC and the damn thing locked up on the HP logo screen! So I had to hold the power button to turn of my laptop.
Connection to Internet through Wi-Fi is not happening after that though it is happening via LAN Cable.
Whenever I try to connect through Wi-Fi it gets stuck showing Limited Connectivity and No Internet Access.
I went through some threads and found that it can be solved by disabling "Block Internet Connection Sharing" setting in Bit Defender but I am not using Bit Defender.
I am using Windows Defender instead and am not able to find such setting in that.
I am experiencing Problem with the wifi connectivity after I updated my Dell Inspiron 15 3521. I updated the Dell Wireless 1703 802.11b/g/n (2.4GHz) to the latest and tried every steps I could find in the blogs, youtube and communities talk but still couldn't fix the problem.
I recently changed my wifi Mac Id using Technetium as my original ID got blocked. I had to reinstall the drivers and restart the PC to get the Network card working. But that it is fine, the Wifi connection disconnects every 5 minutes or so. I have a Broadcomm 802.11n adapter Driver version: 7.35.290 dated 6/07/2015.
I was attempting to figure out how to fix my internet connection, and there was an option which said disable, which i thought would temporarily disable my connection and allow me to simply reconnect. i hit that disable button, and all of the wifi disappeared from my laptop. I physically have turned the wifi on and off multiple times, but the internet connections box wont even show a wifi option. i connected with an ethernet to the internet, and it works fine. I don't know how to reenable the wifi on this new windows 10 system, since i just got it yesterday. i am using an older acer aspire 5742-6814 laptop.
I have a laptop with Windows 10, and it has been working fine for months. Yesterday I thought I had a connection issue with the Internet, and set the computer aside until it was resolved. Later I checked my phone, and saw that the WiFi is actually working just fine. I have restarted and reset and tried to connect to Hotspots and all sorts of netsh commands.
I have a 3 year old Dell Inspiron 15R 7520 laptop with an Intel Centrino Wireless-N 2230 adapter.
Since upgrading to Windows 10, the wifi connection drops out when using battery power and the only way to restore it is to restart the computer using mains power.
"Allow the computer to turn off this device ..... " is unchecked.
I am not the only one with a Dell 7520 laptop running Windows 10 that has this problem.
Since I downloaded windows 10 I keep getting no internet connection before I log on. I called my internet provider and she had me checking a lot of things before she had me to type Device Manager in my search bar and look under networking to see if anything was off. Both my Ralink RT 3290 802.11 bgn Wifi Adapter and my Realtek PCle GBE Famili Controller had a yellow triangle with an exclamation mark in the middle beside them. She had me to right click on them to disable them, then go back and right click again to enable them. My internet connection came back but it keeps losing connection about once a week. I didn't have this problem before the download. This is a HP Desktop and I am connected wireless.
I upgraded from windows 7 to 10-when finished there was a red cross through the wifi icon.Having read numerous forums,I established that there was no old VPN software;I updated the Broadcom 802.11b/g/n software and in network adapter properties,I unticked power management switching off the adapter;also,altered bandwidth to 20_40MHz.As soon as I clicked on that,the wifi switched on!It then works until the computer is switched off;when on again,same problem.If I go to network adapter properties,and disable and then re-enable the adapter,wifi comes on again.
I have a brand new HP laptop that came with Windows 10 home installed on it. I have downloaded and applied all updates from MS.
I use a Wi-Fi connection to my Time Warner router. I have everything setup and things seem to be running fine.
Here's the deal.
I thought I would try and use my blue tooth external speaker. (Just to see what would happen.) I enabled Bluetooth.
StartSettingsDevicesBluetooth.
After I move the slider (so the status reads (On), .... I see a message that reads "Your PC is searching for and can be discovered by Bluetooth devices".
Two things happen:
The "search" never seems to end. And I lose WI-Fi connectivity.
I finally, move the Bluetooth slider to the "Off" position and my Wi-Fi connectivity returns.
I "do" see my external speaker. And it does work. (As long as "Bluetooth" is enabled.)
But of course, I then have no Internet connectivity and THAT becomes an issue for me.
I upgraded my ageing Dell Inspiron 530 desktop PC this morning from Win7 Ultimate to Win10 Pro. The PC is connected to the router via ethernet cable.All seems fine in terms of the OS, but I have no internet access. I know the router's OK as my other devices are fine.When I run the troubleshooter it flags up "There may be a problem with the driver for the Local Area Adapter".Digging further, it seems the issue is "Windows couldn't automatically bind the IP protocol stack to the network adapter"
Looking at Services, I found the Wired AutoConfig and WLAN AutoConfig services weren't running were set to Manual. I changed these to Automatic and rebooted, but still no joy.The network adapter is an Intel 82652V-2 10/100 and Device Manager says it's working normally and the driver is up to date.