Networking :: Other PC Not Visible In Network Places
Feb 10, 2016How to make visible other pc connected with same network.
View 4 RepliesHow to make visible other pc connected with same network.
View 4 RepliesReader's Digest version: Both of us are on the same network through an Asus RT-AC56R router. Both are running Windows 10, fully patched, checked w/ Belarc. My network is visible to her system and public files accessible. Hers, and the usb printer on her PC are NOT visible at all to my side of the network. It's as though her system isn't on the network.
Every setting in network sharing matches. I've checked several times to be certain both PCs have the exact same Advanced Network Sharing settings.
I am also running Linux Mint 64-bit as a dual boot. Needless to say, networking using Linux is PERFECT.
I have 3 computers on my home network, two are Windows 10 desktops, one is Windows 7 laptop. I'll call them 10-1, 10-2, and 7.
10-1 can see 10-2 and 7.
7 can see 10-1 and 10-2.
10-2 can see 7 but CANNOT see 10-1.
All are Ethernet connected to the same router.
New observation: As an experiment I turned off discovery and restarted 10-1. It is still visible to the Windows 7 laptop and sharing is the same. It seems like the settings in the network and sharing center have no relationship with what is really going on.
I am running Windows 10 and trying to set up a network so that I can transfer photos from an android phone onto my laptop hard drive for back up. I've been using an app to do this and it has worked in the past brilliantly (called "Sweet Home" if interested). Unfortunately since upgrading to Windows 10 and changing my phone it doesn't work. I have also been trying to test the network using ES File Explorer. I have tried setting this up on another laptop running Windows 8 and it works no problem, so the issue must be with my settings.
I have set up a home group, made sure everything is shared where it should be and permissions set so that the network should be visible to everyone, but the android device can't see the network at all. For reference when setting up the network I followed the step by step in the link below on the Windows 8 laptop and it worked.
[URL] ..
One strange point that I think might be related on the Windows 10 laptop, is when I get to Step 2 (of the link above) under "How to enable sharing on Windows?" the "Share" button is greyed out, even when the folder is not shared. I have to share it by clicking the "Advanced Sharing" button instead.
I have a 3TB external hard drive plugged in to my pc. I use it to stream movies and music to a couple of media players in the house via our wifi network. Recently it has disappeared from my view on the pc. When I plug it in via usb, nothing happens, yet when I plug it in to my daughters laptop it is recognised, leading me to believe it is a setting problem with my pc rather than a problem with the hard drive. How to make it work again.
View 9 RepliesI have an ASUS 2 speed router - it worked fine in Win 7, allowing me to target the 5.2 MHz stream toward my TV for streaming, and use the 2.5 MHz speed for the computers, tablets & phones.
Well, I lost my motherboard, and purchased a CPU with Windows 10. I cannot tell what the router is doing - Windows 10 seems to think I do not require this information, and will not allow me to even SEE the router settings, let alone change them. The stream to the TV seems fine - the CPU internet is slow.
Anyway - how I can access the router settings!
I cannot get the WIFI status tile to show in the Notification Area.
There is no option in Settings - Notifications and actions - to turn this off and on.
How do I find my network DVR in Network and sharing center?
View 4 RepliesI just switched to a new router (from DLink DIR-655 to TP-Link Archer C7) and now my Windows 10 Pro cannot see network shares nor can others on the network see its shares. Prior to the router switch, it could see shares and others could see the shares it exposed.
The Win10Pro can see the internet. I can still ping other computers and they can ping the Win10Pro, just no Windows sharing. All computers are in the same Workgroup. I am not using a Homegroup; computer connections are made with user accounts.
The Windows 10 Pro is connected via wire. When I made the switch, I remember that Win10 came up and told me it had a new network and prompted whether to allow network discovery - to which I said yes. I thought that odd at the time since changing the router didn't change the NIC connection from the Win10 -- but whatever. However, it did change the IP address on the Win10Pro from what it was. But I've since rebooted all computers (thinking that might cause them to refresh) but no improvement.
Advanced Sharing Settings are set as:
Private: Network Discover = ON, File and Printer Sharing = ONAll Networks: Password Protected Sharing = ON, Public Folder Sharing = ON
Just upgraded to Win 10 and kept losing internet access. After troubleshooting my home network is now named "Network 2". How do I change the name to "Network 1 "?
View 3 RepliesNever seen this before in other OS, just noticed when i hook up my external WD Ultra Passport no icon shows in Devices and Printers just square white icon, same happens in notification area under Safely Remove. Also in Devices and Printers my Epson Printer no longer shows as a Printer Icon but a Folder icon with name of the printer. Maybe with printer it is driver or software related to Windows 10, but both of these devices never had this happen in Windows 8.1.
Both devices work properly and is seen in Device manager correctly.
Much as I like Windows 10 (despite an unnecessarily difficult installation), I'm horrified to find that they have apparently abandoned the 'Favorites' and 'Recent places' folders - which I used constantly and had grown to love.
Are they hiding them somewhere? Is there a way to restore/find them? Have I missed something obvious?
(I can't believe that they would be so stupid as to get rid of them: 'recent files' and 'Frequent folders' are good, but not quite as useful...).
I've got this issue that comes and goes. So basically my mouse wont click my taskbar sometimes and on google chrome when i press on one of my bookmarks it opens a new tab instead and when i press on it, it closes down, and no im not pressing the X, its wherever i press it will just close down.
This issue started happening this summer when i did a fresh install of Windows 10 but then i fixed it by restarting explorer.exe and it disappeared but now even that wont work. It started to happen again when i installed Windows 10 on my SSD yesterday and the problem just showed up and then after a while it disappeared but now its back again.It is really frustrating. i read somewhere that it could be my middle mousewheel that is lagging up but i dont think so.
I have custom PLACES in left pane of SAVE AS dialog boxes that I setup in Windows 7 and carried over to 8.1 then 10. I used program called PLACES BAR EDITOR which I think utilized Group Policy Editor or maybe gpedit was just an alternative way to do same thing. Regardless I cannot find how to do this in W10. gpedit is gone and PLACES BAR EDITOR will not install.
attached is shot of SAVE AS window, note the bottom has no icon because I deleted that location and want to update it to a different location.
Has had this issue for a couple of days now where I right click on the Explorer app on the taskbar and click a recently visited folder and nothing happens, there is no window popping up with the location.
View 9 RepliesToday, while having lunch at my favorite restaurant, I tried to connect to their WiFi network as I usually do. I got the following message:Checking network resources.And then, after a few seconds: Can't connect to this network. My obvious question is, why not? To begin with, was it something wrong with my computer, or something wrong with their network?
For example:
DHCP server did not respond
DHCP server did not issue an IP addressStored password incorrect; enter new password: _________
WiFi adapter card not respondingInsufficient virtual memory
But no, none of that useful information was offered. How am I supposed to fix the problem?
I have a desktop PC running Win7 64Bit Ent. It's not actually in use, so nothing is connected. I also have a laptop running Win10 64Bit which I'm using to type this post. I have some audio files on my desktop that I'd like to pull off of there, and put them on my laptop, and then maybe on a cloud. My 1st question: Is it possible to simply use a USB cable between 2 USB 3 ports if I simply power up the desktop with the USB cable connected? Does the USB protocol provide for me to see those HDD's on the desktop via the laptop? I'm quite limited for physical space, and I don't need the desktop to be running permanently, I just need to get these files off of it. If that's NOT a solution, what is the next easiest method?
View 6 RepliesI have forgotten my network security key, all of the info I find points me to connections, wireless properties, etc..... This does not match my updated Windows 10. What is the procedures for the latest updated Windows 10?
View 1 RepliesI have two Win 7 computers on my wired network and 6 Win XP computers on this same network. This main computer was Win 7 and just upgraded to Win 10 in November. For a year this network has worked just fine, plug and play basically when I set it up, now after Christmas shutdown (2 weeks), I can't see any of the computers on this network. The only thing I can see is the media drive on a computer called 6Head2. All I really do is transfer files from this main computer out to those 8 other computers.
What is wrong with my computer? Network discover, file sharing all checked, network location was changed from Public to Private today by me. But it did work last year, even with the network location being public.
I have a home network that includes-Two Windows 7 PCsTwo Linux machinesA Brother MFC7820N networked multifunction printer..All the above are on wired connections. Then there's an 802.11n wireless link for laptops and media devices.I'm just setting up a new machine that's running Windows 10 Home, using the wireless network. I was annoyed to find that Brother don't have a full-function Windows 10 driver for the 7820N that supports scanning, but the Brother site says the built-in drivers in Win 10 should work for basic printing.
Problem: I successfully added the printer device to Windows 10 (at the 3rd attempt) using the "manual advanced" method. The printer has an entry in the hosts file, and was added by host name.The printer fails to print, with a "not responding" type message. The driver also can't pick up the status info from the printer.
What's really weird is-I can ping the printer from the W10 box (and the other machines) by either IP address or hostname.However, this printer has a web interface. I can access this from any of the Windows 7 machines, but the Windows 10 machine says "web site failed to respond" or somesuch. This happens with any of: Edge, IE11, or Chrome browsers.I can't even make a manual connection (telnet to port 80) from the Win 10 machine (timeout).The Windows 10 machine CAN access all the other devices on the home network, including the web servers (Apache) on both the Linux boxes.
This looks like the web access to that particular address is being blocked somehow. I have tried disabling my AntiVirus package (Kaspersky), but that makes no difference. Is Win10 perhaps detecting an "old" web server on the printer and refusing to talk to it? (and why would that prevent printing using lpd?)
Nothing is working to get my computer to connect to the internet again. It was working fine yesterday so don't know what was changed. All other devices can connect. Using my laptop to search.
IPv4 is connected but I can't get IPv6 to connect at all. No error messages anywhere.
Fixed. Updated drivers worked. Just had to restart a couple times for it to work.
I have a USB connected printer (HP F4100) on my Windows 10 desktop. Everything appear to be working as I have no issue accessing the printer remotely on my Windows 7 laptop. The issue is trying to access from my Windows 10 laptop. I can see the shared workgroup in explorer, but no sign of the shared printer.
How to troubleshoot this? I've gone through the basics such as disabling Windows Firewall, but no luck. Everything looks fine in the advanced sharing settings and as mentioned, things are fine from my Windows 7 machine.
My impression of Windows 10 is not great so far. This along with my machine rebooting due to a security patch even though I had "Notify to schedule restart" selected. The whole mandatory security updates kind of irks me. I kind of get it, but as a power user, I should have the choice. Especially with the amount of sketchy patches that MS has released over the years.
I have Windows 10 laptop hooked up to an ethernet connection which has been working well for the past 6 months. On 2/18/16 it stopped working. I traced the problem to the Qualcomm Atheros network Controller/ Killer E2200 Gigabit Ethernet Controller: Internet status > IPv4 Connectivity: No network connection IPv6 Connectivity: No network connection Clicked: diagnose --> System checked & reset, with IPv4 Connectivity and internet access restored.
This resolved the problem until 3/4, following a Windows 10 update. The above solution no longer works. Clicking 'Disable this net work device' and then enabling it again restores IPv4 Connectivity and internet access for a limited time but loading a new site or page is slower than it was prior to the emergence of this problem on 2/18, and then the connection is again lost after maybe 10 to 20 minutes.
I suffer total loss of network connectivity after a computer crash. I am on win 10 x64
Here is my ipconfig /all:
C:WINDOWSsystem32>ipconfig /all
Windows IP Configuration
Host Name . . . . . . . . . . . . : Xello
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
[Code] .....
Windows troubleshooter reports that "One or more network protocols are missing on this computer".
Some other info: I am unable to connect to 192.168.0.1, which is my router's home page. I can load this page on my laptop if i connect my laptop with ethernet, so the router is fine.
I have pinned "Recent Places" folder (%USERPROFILE%AppDataRoamingMicrosoftWindowsRecent) and this folder shows in explorer windows in Quick Access area. This is OK.
But why this folder disappears from Quick Access aren in open / save dialogs in all applications?
Every other pinned items show up in both explorer windows and open/save dialogs...
Noted immediately after 1511 total system update, yet may have been inherited from an earlier build...
All is working well, yet Network Troubleshooter reports "one or more network protocols is missing."
Various posted remedies have been verified or implemented, to no avail.
Win 7, on the same machine, reports no errors.