I am having problem adding folders from a network drive to the Quick Access.
Firstly I can only drag and drop into the QA in explorer, as right clicking option doesn't work and it only allows one folder at a time to be included. Local folders are not a problem and any number can be included in QA.
Also pinning files to taskbar apps has a similar problem if they are on the network drive.
I am using two computers at home one with windows vista 32bit and the other with windows 10 64bit both are home versions. I want to map the drive on my win10 machine to access my saved files and wanna share from my vista one but when I do it I cannot connect to it because it my windows 10 machine doesn't have the same user and pass but that's irrelevant I guess because no matter what use/pass i use it says this drive is mapped to another user/pass even though there is only 2 accounts on the pc that i have access to and have full access to the shared drive.
I have password protection off for the vista machine because it would be stupid to have to use a password to print since my printer is shared just fine and I can print from any pc. Everguid I use is just not detailed enough I have tried using different credentials bt they don't work.
it was working back on 10049 and then i updated to 10051 and it still was working fine. but recently i did a fresh install and now i can re add a network device
i have a "New" Nintendo 3ds and i cant setup the MicroSD management which requires you to add it as a network drive
like N3DS
in the network tab i can see it but when i click it it says
windows cannot access N3DS
error code 0x80070035
the network path was not found
upon clicking troubleshooting the problem says
the remote device or resource wont accept the connection..
We have 2 desktops, 2 convertibles and an hp tablet. We started with total mess network wise - tried most of the fixes and none really worked. I removed homegroup and started over making sure ALL units were in homegroup and still had problems. After many tries of fixes etc. I discovered two of the units were in different workgroups??
We are finally able to see all computers on all the computers but are left with two network drives which show up as media units but never show up and available in the computer area on all computers. Both show up fine on my desktop but never on any of the other units.
Have rebooted, checked settings and what to check now. We have used networking of some sort for years and depend on it - have been without it now for way too long.
My internet worked fine and I didn't do any changes to it up until it stopped working. I've managed to fix the internet access to allow me to access the internet on my laptop through wi-fi but network access still says no internet access. Websites work however ethernet does not work! I can't connect online on my playstation because ethernet doesn't work. I've tried disabling and enabling the ethernet. I checked the cables, I re-installed the drivers and i turned off and on the router more than I could count.
The internet works on my laptop however a connection test on my playstation 3 says obtain ip address succeeded and internet connection failed. So I can't play online. I am absolutely certain the playstation 3 is not fault as I checked vigurously the settings and I've put in the right connections, however it still does not work? Should I buy new cables for the router?
I have some harddrives on a "server" computer in my home-network running win 7. From my "client" running windows 10 I am mounting these drives using
psexec server -u username -p password -d net share F=F: /GRANT:user,Full /GRANT:media,read 2>nul
net use F: serverF
Today my client crashed and I had to remove the graphics card. Since then I cannot enter my network drives anymore, the commands seem to run, but when I try accessing the drives I get a message indicating I should put a media into these drives. Also, I cannot mount them manually using "map network drive" since the drive letters are not available.
I tried removing them from HKEY_LOCAL_MACHINESYSTEMMountedDevices (they are listed there as "DosDevicesF" etc.), but once I restart, they are there (in the registry) again.
how I could fix this? Win10 somehow seems to remember that thes drives once have been there before and keeps blocking the drive letters...
Well I thought I had this problem solved! I had the same exact issue running Windows 7 so I upgraded to 10. It worked for a few times and now each time I restart, the 3 mapped drives I have show the dreaded RED X. This pc worked perfectly prior to me installing a new Samsung SSD after cloning my OS.
I have a Synology NAS connected via Ethernet and have 3 mapped drives to it (each a separate folder, one for music, movies, and pics). All I have to do is double click the mapped drive and it open right away and the Red X disappears until the next reboot.
Any solid solution or a bat file that will fix my issue? I am not saavy when it comes to this type of thing. I need the mapped drives to work upon startup being I use this pc to load XBMC / Kodi for video playback. Kodi is in my startup folder and when the pc boots up, in Kodi I cannot access the files being the mapped drives are not accessible until I click them. Its a PITA...
This pc is in the basement and I rarely go down there so I boot it up via a WOL app and never have to touch a thing on it hence my dilemma!
Is it possible the SSD loads to quickly and the mapped drives are not visible yet?
I have a home network that includes-Two Windows 7 PCsTwo Linux machinesA Brother MFC7820N networked multifunction printer..All the above are on wired connections. Then there's an 802.11n wireless link for laptops and media devices.I'm just setting up a new machine that's running Windows 10 Home, using the wireless network. I was annoyed to find that Brother don't have a full-function Windows 10 driver for the 7820N that supports scanning, but the Brother site says the built-in drivers in Win 10 should work for basic printing.
Problem: I successfully added the printer device to Windows 10 (at the 3rd attempt) using the "manual advanced" method. The printer has an entry in the hosts file, and was added by host name.The printer fails to print, with a "not responding" type message. The driver also can't pick up the status info from the printer.
What's really weird is-I can ping the printer from the W10 box (and the other machines) by either IP address or hostname.However, this printer has a web interface. I can access this from any of the Windows 7 machines, but the Windows 10 machine says "web site failed to respond" or somesuch. This happens with any of: Edge, IE11, or Chrome browsers.I can't even make a manual connection (telnet to port 80) from the Win 10 machine (timeout).The Windows 10 machine CAN access all the other devices on the home network, including the web servers (Apache) on both the Linux boxes.
This looks like the web access to that particular address is being blocked somehow. I have tried disabling my AntiVirus package (Kaspersky), but that makes no difference. Is Win10 perhaps detecting an "old" web server on the printer and refusing to talk to it? (and why would that prevent printing using lpd?)
Nothing is working to get my computer to connect to the internet again. It was working fine yesterday so don't know what was changed. All other devices can connect. Using my laptop to search.
IPv4 is connected but I can't get IPv6 to connect at all. No error messages anywhere.
Fixed. Updated drivers worked. Just had to restart a couple times for it to work.
my Windows 10 Enterprise PC cannot access to my company's network storage at 10.63.0.250. In the previous edition like windows 7 or 8, I can access easily by enter 10.63.0.250 in the Address box in File Explorer or in Run windows (Window button + R). However, I have got trouble since I upgraded to Window 10. The notification is "The network path was not found", although I can ping to this and another PC can access the network storage in File Explorer.
View 8 RepliesI have a desktop and a laptop setup at home, I have recently upgraded both to Windows 10. Both were previously running Windows 7 Home Premium and could identify each other on the network and I could access files on either PC from one or the other at any time.With the upgrade to Windows 10 I am still able to see the other machine on the local network, but I am unable to access their folders and move files between machines. The error message I get is as follows.When I run the network diagnosis no errors are detected and it asks me if I want to explore other options.
The full error message is:I do have shared libraries available across both machines that are part of my homegroup, so I can access the video files in the hard drive of my desktop from my Laptop but only to play them - not to move them around.I suspect this is either a user validation issue, or a firewall issue and I'm not sure how to go about checking whether this is the case or not.
On my desktop (AKA S4, currently running Win8.1 x64 pro) I have shared out four of the hard drives with full permissions. I have 5 PCs in my network and all can access the four drives. My sister is visiting and currently accessing my network via cat5 wire. On her PC (running Win 10 x64 pro) if I view the network in Windows Explorer I can see my desktop (S4). When I double-click on S4 I'm prompted to enter network credentials. "Enter your credentials to connect to: S4" I entered my logon S4 ID and password but it tells me that the user name or password is incorrect. What the heck should I be entering? All computers are part of the same work group (WORKGROUP) and all computers are wired connected. All computers can access the internet.
View 9 RepliesThree machines:
Surface Pro 4 - fully updated
Surface Pro 3 - Windows 10, fully updated
Lenovo X220T - Windows 8.1 Fully updated
All three machines can see all available network devices, including each other.All three machines can successfully access and interact with third party network devices. In this case, it is a NAS and a network printer.The windows 8.1 machine can access each of the other windows 10 machinesNeither Windows 10 machines can access any other windows share on the network.
This gets me error 80070035 with diagnostics telling me nothing
All three machines are on a Homegroup and while each can see, no one can access anything
Trouble shooting tried:
Double checked all sharing settings on all three computers. They are identical.Double checked workgroupsTried it via IP addressesReset winsock on all machinesFlushed DNS on all machinesReset the routerUninstalled and reinstalled Windows sharing and about 3 other network protocols and servicesEnabled NetBiosran this: sc.exe config lanmanworkstation depend= bowser/mrxsmb10/nsi sc.exe config mrxsmb20 start= disabledMessing around with all sorts of netsh commands clearing and flushing all sorts of other things
I have two computers running Windows 10 Pro Technical Preview Build 9926. One computer is a desktop and it is working perfectly. The other is a new HP 15-F039WM laptop and it came with Windows 8.1 With Bing installed and it also works perfectly in Windows 8.1 mode. I resized the hard drive on the HP laptop to free up 150Gb of space and then installed Windows 10 TP Build 9926 from DVD. It still works perfectly when I use dual boot to go into Windows 8.1. When I use dual boot to go into Windows 10, the network icon in the system tray says "Unidentified network - No Internet access". I did swap cables, etc, but I knew that wouldn't work because the laptop does have Internet access when booting to Windows 8.1.
I read through some threads here after searching for DHCP and connectivity issues and even tried some of the suggestions such as using regedit to look at the network profile. There isn't a network profile. It is displaying a 169... IP Address, so I know that it isn't getting an IP. I tried to manually add the correct settings that work for Windows 8.1 (192.168.0.15 with 192.168.0.1 as the Gateway), but that fails.
I have a usb connected hard drive connected to my Bell 2000 router. The instructions to access this drive is to go to the Documents folder and enter mynetwork. This then shows the shared hard drive as mynetworkNETWORKHD. If I now click on NETWORKHD I get the following:
mynetworkNWTWORKHD is not accessible. You might not have permission to use this network resource. Contac the administrator of this server to find out if you have access permissions.
Not enough storage is available to process this command. This all worked for me under Windows 7. I am unsure if it ever worked under Windows 10.
If I plug a 2 gb thumb drive into the other port on my Bell 2000 rounter it works without any problem.
I have a NAS (WD MyBookLive) which cannot be accessed in Windows Explorer on my brand new Surface by IP address (or name- though that doesn't work on any of my devices for some reason). I can access the config page in my browser by IP, and two other Win10 devices on my network can access the NAS by IP in Explorer fine, and I can access other devices on my network by IP fine on the Surface but for whatever reason only this computer can't access that NAS in Win Explorer.
I just got the Surface yesterday and was able to access the NAS fine, the only thing that's changed is I renamed the device and restarted and since then haven't been able to connect. I've restarted both the PC again and the NAS but no change.
I have a strange issue on my Windows 10 computer: I can only see 1 computer under my home network, but other computers do not appear at all. However, I can access them fine typing in the address bar manually.
Also, for some reason, "LEESERVERPC" does not appear on my network folder, but it appears on the left pane. Is this a Windows 10 issue? Other computers are running Windows Server 2012R2 or Windows 7 and they easily find all computers in the network. I rebooted and resetted my router countless number of times. Refreshing doesn't seem to do anything.
Background: Originally, my Windows 10 computer was seeing all the computers in the network. As I was trying to set up another computer on the network, I refresh my network several times from my Windows 10 computer, and all a sudden all the computers except 1 disappeared on my Windows Explorer "Network". Every other computer in the network has no issues.
See Pic:
I want to emphasize that I CAN ACCESS the shared network computers. It's just that Windows Explorer's "Network" does not show most of the computers!
Everything about my network worked fine on Windows 8. With Windows 10 I have been unable to access PC's on my router. Internet work fine, I see the PC's on network in homegroup, But gives me the dreadful and nonsensical error:
Worth noting that my windows 8 laptop can access these computers no problem. but my windows 10 pc's can access ANY pc's
Tried Everything
Winsock method
all elevated cmd prompt exe's
tcp4/6 config
drivers config
network settings configs
I am left with no choice but to go back to windows 8 ?
Every so often Windows 10 will give a notification about Limited Network Access on a wired Ethernet connection. The notification is not true as I am able to use non-Microsoft applications such as Firefox just fine with the Internet. However Microsoft applications such as Outlook, Windows Updates, Edge and IE do not detect an Internet connection and are unusable. I found that if I turn off real-time protection in Windows Defender and then reboot the computer it clears the error for a time but it always comes back within a day or two.
View 2 RepliesI've just moved house and isp. I am trying to connect my pc to my router via an ethernet switch.
At first my pc would not even connect to a network so deleted and reinstalled the ethernet drivers.
Managed after several attempts to change my network from public to private, but i still have no access to the network.
I have been using a wireless connection but have decided its better for online gaming if i go wired/ethernet.
I am having a problem "unidentified network/ No internet access"
Now in the past with an xp pc i connected the ethernet cable and that was it i assumt there is some sort of set up i need to do for win10?
Also it may be worth letting you know i am not directly connected to the router via an ethernet cable, i am using the plug in things that sends the signal down the house electrical wires. Maybe this is an issue although it wasnt on my xp pc.
From one of my Windows 10 machines I am unable to access the shared folders on the other. The troubleshooter says "One or more network protocols are missing on this computer" and "Windows Sockets registry entries required for network connectivity are missing."
I have run sfc /scannow, but no problems were found. I don't get the problem when sharing in the other direction or when accessing the shared folders on the same machine.
This comes amidst a cluster of sharing-related problems. Before the reboot after which the present problem manifested itself, shares going in the other direction were invisible in the network browser (but could be accessed via the search bar). Also, the machine in question does not appear in the HomeGroup browser even though it is a member of the HomeGroup.
I'm running windows 10 that was upgrade from windows 8.1, the first time i don't care about this quick access feature so i change the default explorer to 'This PC' and then i find this feature is somewhat useful for me, and when i want to use it that looks like this feature not grouped and it's a little annoying, is there any way to fix this problem.
View 4 RepliesI'm not a fan of quick access/frequent folder/recent files. I liked the windows 8 system. Reason is because I don't want people who use my computer to have quick access to files that are personal or nsfw.
I don't to use a type of security system because I use my computer often at work and at home so it would waste time. I just want to avoid those moments when people borrow my computer spontaneously and Quick Access is the first thing in the files explorer. I just want to classic file explorer system.
I have dual screens and have two task bars. I have an exe I'd like to pin to either Quick Access or my second task bar, but I can't find anyway to do either. Any way to do this ?
View 3 RepliesI just installed Windows 10 and have noticed that the quick access tab doesn't work. I have turned on "show recently used files in quick access" and "Show frequently used folders in quick access" , but still nothing show up on the quick access tab, even though ive accessed many files and folders. Also i can't pin any folders to the quick access.
View 1 Replies
