Networking :: Running Programs From NAS / The Application Was Unable To Start Correctly (0xc0000142)
Oct 9, 2015
Ever since installing Windows 10 (clean) I'm facing several network related issues. Before going in depth I'd like to figure out if it's a problem with my PC or if it's a problem with Windows 10 in general.
I'll just stick to one problem for now.I have a Synology NAS and connected a directory there as network drive. I have some programs there that won't work when run from this location.
GameSave Manager/HandBrake Setup/Notepad++ Setup
"The Application was unable to start correctly (0xc0000142). Click OK to close the application."
WinMergeProtable Process shows up in Process Explorer but closes immediately.
Audacity Portable/WinDirStat Portable (and probably more programs using the PortableApps.com Launcher)
"X:ProgramsWinDirStatPortableAppAppInfoLauncherWinDirStat Portable.ini is missing [Launch]:ProgramExecutable - what am I to launch?"
AIDA64 Program works but no icons appear.
There are more but I think those few suffice for now.
All of those programs work fine once I copy them to a local drive and run them from there. Windows 7 ran the very same programs from a network drive without any problems.
I won't even touch the fun stuff like how playing a video from my NAS causes downloads (to the NAS) to stop because of access errors.
View 9 Replies
Similar Messages:
Nov 12, 2015
I upgraded to Windows 10 recently now I am getting this error when opening one of my favorite games!
View 1 Replies
Sep 28, 2015
When i tried to run Origin on Windows 10 an error:The application was unable to start correctly(0xc000007b).I have tried multiple solutions.I have tried un/installing visual c++,direct x and etc..
View 1 Replies
Mar 5, 2016
I'm trying to run an application called MySQL Workbench which has been working perfectly fine up until last week which now displays the error message below. I've tried uninstalling and reinstalling to no avail and talking to the Microsoft support helpline I'm passed from department to department with no resolution.
View 1 Replies
Aug 6, 2015
I just installed Windows 10 on my Asus pc and now the Minecraft launcher won't run, it gives me an error message "Application unable to start correctly (0xc0000018)". I have no clue what went wrong, but it doesn't want to work. I will only take restoring to an earlier date as a last resort.
View 1 Replies
Aug 17, 2015
I have windows 10 installed and I have also installed the finale 2014 demo.
I am getting an error on launch of the application. It seems to be the only application that cannot run.
The error is:
"The application was unable to start correctly (0xc000007b). Click OK to close the application."
It seems to be an error with the C++ runtime. I have installed them but I have been unsuccessful.
View 2 Replies
Feb 10, 2016
0xc000007b Error when tring to start steam games, "Application did not start correctly" I've tried multiple problems, multiple fixes. none work.
View 2 Replies
Oct 21, 2015
Will a clean install of Windows 10 Pro 64 bit fix error code (0xc0000142)? The program is Autodesk Inventor Professional 2014. It worked fine on Windows 7 Pro 64 bit.
View 1 Replies
Apr 4, 2016
Windows 10 x64.I upgraded my SmartFTP application which I have done many times.
When I tried to run the application, I immediately had the error message: The application was unable to start 0x0000022.
I uninstalled (RevoPro) and reinstalled: same thing. I contacted Support who told me to reinstall my OS!I checked to see if this applied to all my applications. I found one application that had the same error: Corel Draw x8. I tried others which ran OK.I ran sfc /scannow without any integrity violations.I temporarily turned off AVG and tried to run the application - same error. I had to repair my Visual Studio 2015 Community Edition -
View 5 Replies
Aug 10, 2015
When I try to access Settings, I get the following error:
ms-settings:// The application has failed to start because its side-by-side configuration is incorrect. Please see the application event log or use the command-line sxstrace.exe tool for more detail.
I tried the command-line suggested and right after I hit enter, I get a flash of a window popping up on my screen and then it's gone. It's so quick I can't see what it's trying to open.
View 2 Replies
Feb 1, 2016
Recently, any program i install will not be able to start. Example is Handbrake, i want to convert some videos to put them on my Iphone so I downloaded Handbrake to convert them. It all installs well as Administrator. I try to start the program, making sure to run it as administrator but every time it gives me the error "Handbrake has stopped working" Ive tried many different versions of handbrake, even their nightly builds but nothing works. Today i want to test ShadowPlay using Geforce Experience. Problem is, I had uninstalled GeForce experience. I installed it again but it will not start. It gives the error "Geforce Experience has encountered and error and must close" Before this programs were able to install and run perfectly fine.
View 1 Replies
Oct 30, 2015
I an trying to run Autoroute on an Asus machine with Win 10 and get a message saying "your registry settings for this application were not copied correctly". This occurs when the program in installed from its original discs or from a new works disc. I think it previously ran OK since upgrading to Win 10 but cannot be 100% certain.
View 4 Replies
Sep 16, 2015
This is very strange, but for some unknown reason Windows 10 will not let me open some programs (e.g. file explorer, task manager, chrome. But, it will let me open Word, Excel and Edge. When I go to shut it down it just keeps running and running. It is almost like some App has taken over part of the system and won't let go. I have let it run for 4 hours and it never shut down. Obviously I have to disconnect the power cord and do a hard boot to get it back.
View 6 Replies
Jan 19, 2016
I have a Windows 10 Laptop. Tried using Task Scheduler to automatically run Good Sync program on a predefined schedule. However, it fails to run the program. My user account has administrative priviledges.
View 8 Replies
Dec 14, 2015
Have a windows problem I cannot get around. In windows 7 and 10 I am trying to prevent multiple copies of a program being opened from the desktop.
In XP, there was a Right Click Option. – Allow only one copy of the program to open. This is missing from newer Windows.
I have set up a neighbour’s windows 10, and wife regularly inadvertently runs email program multiple times. Is there any cure for this in windows 10?
View 3 Replies
Jul 31, 2015
See description. Also unable to add gmail to the mail application. May be something with network settings but unable to find a solution.
View 19 Replies
Feb 10, 2016
I have a HP Notebook 15-ac134ns Windows 10 Home 64bits from 3 months ago. When I run some programs (at the moment I have detected Firefox, Chrome, Teamviewer, Windows Live MSN, and some others) installed by me, they work normally, but when I minimize them they don't go to taskbar, I see like the windows goes up and dissappears. But program keeps running, so I can locate in running processes.
Then I have to find Explorer process, kill it, and firefow shows up in task bar for a few seconds, so I can click on it and it is accessible again in the very same point it was before.
I have tried to locate the "missing" programs with Alt+Tab or in different desktops, but not available.
I have also tried to pin and unpin the programs to taskbar, but same.
View 9 Replies
Feb 10, 2016
I was sick of windows and decided to switch to linux. I found amazing linux distribution which is called Elementary OS Freya and looks just amazing. Really nice and minimalist. Unfortunately I'm an 3D artist so I'm a software dependent so I can't use linux because the support for programs is horrible. Even though I managed to get Maya working on linux I've got wrong drivers for my AMD graphics card. I tried downloading drivers from AMD web page, but those drivers made my computer to crash and I had to restore linux and try again. So I was pointless because even graphic drivers wasn't working at all, so I had to switch back.
Windows is really good, stable and reliable OS and the program support is amazing, but I'm just got tired of all the same looks. It's just so annoying. Lets take file explorer for example. There's a lot of buttons and everything that nobody's using and it just looks horrible and you have to customize shit out of it to get rid of all that stuff. So as you may have understood I'm trying to make Windows 10 look more simple, minimalist and eye-catching. Linux has this amazing thing that you can change desktop environment. For example Freya OS is basically Ubuntu, but with different desktop environment. Ubuntu's using Unity and Freya's using Pantheon. And the thing is, that if you want to get the looks of Freya OS on Ubuntu you don't have to reinstall your OS. You just install different desktop environment and boom, as soon as you restart your pc Ubuntu loads Pantheon instead of Unity. I thought why Windows couldn't have that kind of stuff. Well as it turns out it can and there is few desktop environments for windows that can change explorer and all the shell and use custom instead, but those look awful. Don't understand why would people even consider using those. Anyways, there is one custom desktop environment which is called LiteStep and it has some decent looking themes, but unfortunately it's kind of old so there's no support for Windows 10. I saw some people taking initiative and making it work on Windows 10, but I couldn't get it working. Well technically I could and I used it with default theme which is even worse than default Windows looks and I tried to download some custom theme and nothing worked because theme required (and all of the themes does) som additional modules. And there's thousands of those and the server was down so I wasn't able to download modules and use the theme. So it was just useless.
So now the only thing that I was able to do was to install som custom themes for windows and so on and I got it looking pretty nice, but there's only one thing left and I can't fix it. I'm using Nexus Dock and I'm having my taskbar at the top of the screen which is okay. It actually looks a lot like Freya OS which is nice. But there's only one thing that annoys me. As soon as I open some program it shows on the taskbar. How to disable that. I don't want to disable taskbar or hide it or whatever. I want taskbar to be on a top of the screen and I want to have dock at a bottom of the screen and when I open programs I don't want to see them on a taskbar.
View 1 Replies
Jan 7, 2016
I read a lot of stuff on the internet and it seemed the prevailing solution for this problem is to go into Settings/System/Default Apps and then set the default according to the file extension.
Been there, done that, at least 5 times. And it still opens with Edge and changes the default back to Edge. Microsoft doesn't want you controlling anything, do they?
How do I change this and make Adobe Reader the default, once and for all?
View 2 Replies
Feb 10, 2016
In the past I have had to go around to each computer and set the default programs. Is there a way to create a batch file to set default programs silently for each user that signs on? Like we would like to have Adobe Reader DC, Internet Explorer, and VLC player be the default programs.
View 2 Replies
Feb 10, 2016
As the title said, how do I hide (not remove) pinned and running programs on taskbar?
And appears when I hover on start button?
I just want my desktop a bit cleaner but easy to access my favorite programs.
I've googled for more than 3 hours and found nothing as I expected.
View 7 Replies
Dec 29, 2015
My computer seems to crash randomly when I have 2 or 3 programs running at once, need instructions to provide necessary information and data to see what may be causing the issue?
View 5 Replies
Feb 11, 2016
So, I want to make my gaming PC as effective as it can be. When the PC is idle (no programs running, except task manager), I have 36 background processes and 26 system processes, Ram usage is @ 22 %, like in the picture below, I have 8 GB 1866 MHz RAM...
I am wondering, is the RAM usage too high, or is it okay for Win 10 ?
I was thinking about uninstalling the Cortana app, because it eats around 35-40.000 K, but if I erase this, I wont be able to use windows search...
View 1 Replies
Dec 2, 2015
I recently upgraded the 3 machines on my home network to windows 10 home.
Currently when I open up "this PC" and click on network, only one of the 3 computers shows up, and this machine is not the local machine on 2 of them. However If I type in the UNC address for the other machines I can access them.
If I set up a home group all the computers show up in the home group roll out under "this PC" but still not in the network.
Something else that is strange. If I look at "network and sharing center" two of the the computer see one private network name and the other one sees a different name.
View 4 Replies
Nov 2, 2015
I'm not sure what to do. I ran a few cleanup programs. adwcleaner, ccleaner, etc and opened up edge and all the bookmarks were gone. But also to add I imported Google Bookmarks from my phone into the bookmarks also. So I had all my bookmarks in one place. But the Edge bookmarks were only saved on Edge and I can't remember those important websites I need.
View 1 Replies
Jan 3, 2016
Because my Windows 10 machine won't start correctly, I'd like to make a Startup Repair USB drive. Apparently, the main way to do this is from within Windows 10, but that's obviously not an option.I have access to a Windows 7 computer. If I make a Startup Repair drive there, will it work on Windows 10?
If not, can I at least use it to boot my computer and run chkdsk and sfc?Is there some website where (using my other computer) I can download the image of the Windows 10 Startup Repair, or something like that?
View 3 Replies