I was running Windows 7 on my laptop. I have a file server running Linux and Samba. When I open the Network icon in Windows 7, I see my server there and I can open it and access the associated folder shares.I upgraded to Windows 10. Now if I double click the network icon, I don't see any machines except my local client laptop. However, if I enter the UNC path to my samba server (myserver) into the path bar of Windows Explorer, I can access the server. If I want to add a network printer to my laptop that is shared by the server, it won't find the server in the search list. However, I can enter the literal UNC path to the printer and add it. So it has something to do with nmb I think? Not sure.
I just switched to a new router (from DLink DIR-655 to TP-Link Archer C7) and now my Windows 10 Pro cannot see network shares nor can others on the network see its shares. Prior to the router switch, it could see shares and others could see the shares it exposed.
The Win10Pro can see the internet. I can still ping other computers and they can ping the Win10Pro, just no Windows sharing. All computers are in the same Workgroup. I am not using a Homegroup; computer connections are made with user accounts.
The Windows 10 Pro is connected via wire. When I made the switch, I remember that Win10 came up and told me it had a new network and prompted whether to allow network discovery - to which I said yes. I thought that odd at the time since changing the router didn't change the NIC connection from the Win10 -- but whatever. However, it did change the IP address on the Win10Pro from what it was. But I've since rebooted all computers (thinking that might cause them to refresh) but no improvement.
Advanced Sharing Settings are set as:
Private: Network Discover = ON, File and Printer Sharing = ONAll Networks: Password Protected Sharing = ON, Public Folder Sharing = ON
I have a networked Windows 10 Pro computer A with built-in 'Administrator' account disabled. However, it has a "normal" administrator account named 'Admin'.
I would like to access administrative share 'AC$' from another computer B in the network. Windows asks me for access credentials. I enter 'Admin' and the corresponding password. This results in "access denied" error.
Hence the question: What's preventing the access?
My guesses are
1. (Unlikely: ) Administrative shares are accessible to the built-in 'Administrator' only. 2. (More likely: ) Administrative shares are accessible to a designated set of users and there's a way to control it. My homemade 'Admin' is not on the list. 3. (Most likely: ) Network access to administrative shares is completely disabled by default in Windows 10, but can be enabled somehow.
I have a Freenas Server (based on FreeBSD Unix) connected to my network. I can't get it to show up in file explorer untill I type "//000.000.000.000" (it's IP address). When I try to drag a file to the window CIF shares (Permissions in Unix are Allow Guest Access and Recursively set sane default windows permissions on share) I get the error "You Need Permission to Perform this Action". Both of these features worked on Win 7 Pro before I did an upgrade to Win 10 Pro. I also did a fresh install of Win 10 Pro and it made no difference so I restored a Macrium image of the Win10 Pro Upgrade.
I have 3 computers on the network. All have shared folders . My problem is as follows.
Lets call the computers c2, c3, c4. I am using network shares
When on computer c4 , computers c2 and c3 are not listed at all under network. Sometimes I do see c3 listed but cannot access it.
In computers c2 and c3 , all computers are listed and I can view all the shared folders in c2 , c3 including those on C4.
I cant understand why c4 have such problems viewing other computers on the network. I have rebooted router ( E4200) and computers but still have same problem .
All shared folders are properly shared. and no passwords are required for networks in adv sharing .
I have several usb-connected drives and several SATA drives on a Win7Pro-64 system just upgraded to Win10. The only account on the machine is a local administrator account. On each drive I have a shared folder.
Where before I could connect via SMB/Samba from non-Windows networked devices using the local account credentials, I can now only access the shares on SATA drives. Any share on a USB drive is inaccessible to, say, ES File Explorer or Astro on a Android Tablet (although the share name can be read).
I can still access all shares from another Windows 10 machine. All devices have the proper Workgroup.
Clearly there is some SMB policy change in Windows 10. I've seen one fix for network drives but it doesn't seem to apply here (and also doesn;t work). Also not working is anonymous login to shares with with Everyone access, which also used to work.
I've got 2 Western Digital Network drives hard wired on my network, a My Book World and an EX2.
Since upgrading to Windows 10 I've had intermittent problems viewing and setting network drives. I've read a lot of other posts and tried a number of things suggested without success.
The WD Discovery tool finds the Network drives, but the box to map network drive is greyed out. I can access the desktop control panel from my browser. If I try to add a network location the drives are not listed. If I try to add the drive letter WDMYCLOUDEX2Public the network path is not found?
I have another Windows 10 computer on the network which can access the drives without issue - so it must be a setting on my PC. Tried disabling my Kaspersky security - still not being seen? I suspect that this has been as a result of a windows upgrade?
Surface Pro 4 - fully updated Surface Pro 3 - Windows 10, fully updated Lenovo X220T - Windows 8.1 Fully updated
All three machines can see all available network devices, including each other.All three machines can successfully access and interact with third party network devices. In this case, it is a NAS and a network printer.The windows 8.1 machine can access each of the other windows 10 machinesNeither Windows 10 machines can access any other windows share on the network.
This gets me error 80070035 with diagnostics telling me nothing
All three machines are on a Homegroup and while each can see, no one can access anything
Trouble shooting tried:
Double checked all sharing settings on all three computers. They are identical.Double checked workgroupsTried it via IP addressesReset winsock on all machinesFlushed DNS on all machinesReset the routerUninstalled and reinstalled Windows sharing and about 3 other network protocols and servicesEnabled NetBiosran this: sc.exe config lanmanworkstation depend= bowser/mrxsmb10/nsi sc.exe config mrxsmb20 start= disabledMessing around with all sorts of netsh commands clearing and flushing all sorts of other things
Several PCs in my store.. some running W7 starter, some W10 Home pro.
A few days ago suddenly I could no longer access a folder on another W10 computer, where we tend to store a lot of important documents. The computer where the other folder is, runs also W10.
Shares are usually done vie HomeGroup - share with home group users.Other computers on the network have no problem accessing it. Furthermore, I can access it from another local account on my computer, but not from my main account (which is a MS account)..It asks for credentials, although I am a homegroup user.. nevertheless I enter the other computer's only username and password (admin ones) and it still does not let me in. Try my own MS user and pass - also "wrong".
Tried leaving and joining the Homegroup.
Tried restarting network related services and setting them on Automatic.
Tried homegroup troubleshooter - says probable problem is with network, so should run Network troubleshooter.
I do so and it shows error:This network troubleshooter shows error: resource (peer to peer grouping) is online, but not responding to connection attempts.
Following the latter and some google searches, I tried adding DisabledComponents" DWORD with "0"value in HKEY_LOCAL_MACHINESYSTEMCurrentControlSetservicesTCPIP6Parameters But still NO-GO.
I have so far avoided using Windows ID login (except on a sacrificial VM I use for Windows Insider(*)) as I can no longer access the SMB shares that I have set up.
Is there any way for the two to co-exist? I can't get my head round using SMB shares and NTFS permissions with Windows Live ID - is it possible in any way at all, or have MS (as usual) given us a "new spiffy improved thing" which is actually none of the above?
Why can't I use a local login AND have have access to the Insider programme?
Using a LOCAL account I have no problem with Shares -- how do I set these now using an Ms account.
Samba just times out trying to access Windows machine where I'm logged on with an Ms account. Also I can't access other Windows machines from the Ms account. The other Windows machines can't access the Windows machine where I'm logged on with an Ms account.
All these problems DISAPPEAR when using a LOCAL account.
I think my future strategy will be just keep a MINIMAL Windows VM with an Ms account to GET the insider builds and then revert back to Local accounts.
Freenas does not show up in my network in Windows 10. but shows as an app. therefore i can't add zappiti folders because Freenas does not show in network but as an app.
having trouble recovering my password for a Homegroup, Windows 10. I know, know - I don't know why I don't have it written down along with my other bazillion passwords..I'm on the computer I used to set up the Homegroup, which I vaguely recall setting up a year or two ago when we first got this desktop. I'd like for other computers to access files on this desktop, I assume via the Homegroup. but I can't recall the password to connect to this desktop via Homegroup.
I've read that if I'm logged into the account on the computer used to create the homegroup, I should be able to go through control panel/ Home group/show or print password - but I don't see that option.
When I go to CP/Homegroup... it says "bsn on NISNESTPC has created a Homegroup on the network" - and only gives me two buttons to "join now" or "close". If I attempt to "join now" - I get as far as needing to enter the password, of which I can't remember. There are also 2 links for "change advanced sharing settings..." and "start the homegroup troubleshooter". how can I recover my forgotten HomeGroup password in Windows 10??
I have several computers, one laptop recently has a new problem. The internet network connection in the corner has a tiny yellow triangle and says the connection is limited and says it is NOT connected to the internet - even though it IS connected to the internet. It does this for both the wireless icon and the ethernet icon, so it can't be a driver issue.
I have rolled back the drivers, gone to the HP support site to get their drivers, updated to the latest drivers, and nothing gets rid of those triangles.
It's also not a router issue, because I have another computer on the same router with no problem on either the wifi or ethernet. I've done sfc /scannow in both safe mode and normal mode. I've looked for any errors and there are none. It is very annoying.
I will be keeping the wireless turned off most of the time on my desktop, as I use it for live pro audio. Is there a registry hack to put the switch in there, even if the computer is not a laptop???
We use a lot of VPN PPTP Connections. On most we turn off "Use default gateway on remote network". See the image below that shows where this setting is turned off.
We cannot open the properties for Internet Protocol Version 4 on VPN connections under Windows 10. This is located at Network Connections and Properties of a VPN Connection. Networking Tab, then select Internet Protocol Version 4 and click Properties. But under Win 10 the properties dialog does not open.
This has been tested on several Windows 10 systems and we have enabled Administrator and tested under that login as well.
Ok basically I've been thinking about getting a Android / Windows box for my live TV streaming but I've been told that RAM is key and they don't seem to put more than 2gb in boxes so what I now want to do is run a HDMI from my laptop (with 12gb ram) to my TV. My question is can I set Windows up to only project the streaming playing to the TV and leave me to use my laptop for other tasks?
After the major Windows 10 upgrade that happened I think in late November to early December of 2015 my network connection started dropping periodically. This is wired connection directly to my router and I've done all the netsh winsock reset and other solutions listed all over the internet, but like clock work I lose internet connection to just my desktop. All my wireless devices continue to work just fine. When I select repair connection I get the error of protocols are missing. The adapter has a visual status of identifying network. I thought it was a DHCP issue, but it still happens with a static IP address. This so frustrating as the only thing that fixes it is a reboot and then it seem like the clock resets for another 24 hours. I've tried going to device manager and updating drivers but it tells me the drivers are up to date. I've uninstall the drivers and allowed the OS to reinstall them to no avail. I've even deleted the adapter and restarted and allow it to find the hardware and re-add the driver and none of this seem has fixed the problem.
I have several PCs at home as well as music streaming devices such as Pure Sensia and Freecom MusicPal. The PCs run a mix of Windows 7 HP and Ultimate all 64bit. I use Serviio to share music to the streaming devices and PCs. The PCs all use password protected network shares, and I selectively share certain folders from different PCs to enable both simple file sharing and backup which are simple script driven processes.
All has been working reliably for years until (Dum-Dum-Dum!) Windows 10... A new laptop arrives with Windows 10 preinstalled.
I've got it up and running but cannot work out how to add Microsoft cloud accounts, such as those directly linked to OneDrive, onto the windows 7 PCs to enable password protected sharing to and from this new laptop.
The accounts have the same usernames on each flavour of windows PC, but the windows 10 version also has an email.
I've just 'upgraded' to Windows 10 from Windows 7.
I've noticed that file extensions are not shown when I display the files in a folder. For example I have a folder containing html files, and all that appears is e.g. Chapter00 when it should show Chapter00.html, ebook shows when it should show ebook.css, content shows when it should show content.opf, and Jane Eyre shows when it should show Jane Eyre.epub. Strangely enough toc.ncx shows as it should.
I've been through all the settings folders I can think of. How do I make Windows 10 show the file extensions as they were shown in Windows 7?
