Networking :: Since Update Computer Disconnect From Internet When Wakes From Sleep
Oct 5, 2015
Title says it all. After waking from sleep mode the computer disconnects from the internet and I have to reboot to get a connection. Makes the whole point of having a "sleep" mode useless. This is annoying because often I go away from m y computer for a few hours during the day and don't want to have to reboot to get back onto my computer. Rebooting wears out the components and is uneccessary when it should simply wake from sleep mode with no hassles. I have a wired connection via ethernet cable. My router is always switched on.
View 4 Replies
Similar Messages:
Nov 5, 2015
I am on 10565 Pro version though this occured in last build too. Whenever I come back to my pc in the morning after putting it in hibernate mode for the night my airplane mode is always on. I notice it first by my bluetooth mouse being disconnected and then wifi connectivity.
The one fix I tried is unchecking the allow to shut off option to save power under device manager properties for my wifi adapter.
Using a Dell XPS 9343
View 8 Replies
Nov 21, 2015
My new Asus Win10 machine with a solid-state hard drive wakes up from sleep refreshingly quickly -- just a couple of seconds. But it takes between 15 and 40 seconds before the Internet connection is re-established. Once the connection is re-established, it works fine. But that delay is annoying. Can I do something to speed up the re-connection?
I don't know where the delay is coming from. My NIC is plugged directly into my Comcast cable modem -- no other routers or the like involved. The NIC on the machine claims to be an "Intel Ethernet Connection (2) 1219-V", running driver version 12.13.17.4, which is claimed to be the current version. The "Power Management" tab in Device Manager for the NIC lists three power-saver options, all of which are enabled (that is, the boxes are checked):
Respond to ARP requests without waking system
Respond to NS requests without waking system
Energy Efficient Ethernet
(I am attaching a PNG of the Power Management tab.) These options suggest that the NIC should be able to keep the Internet connection alive, even during sleep. So I don't know why I am experiencing a delay in re-establishing the connection.
View 1 Replies
Aug 3, 2015
Upgraded to Windows 10 and now the computer wakes itself from the sleep. I have already disabled network adapter, mouse and keyboard from waking the pc. I have also disabled scheduled tasks from being able to wake the computer.
View 1 Replies
Sep 3, 2015
I've searched the board and found many similar problems to mine, but nothing exactly like it, and as such I haven't been able to fix it.
When put in sleep mode, my computer automatically wakes up at a set time.
I have disabled wake timers in the power menu, I have clicked of "allow [this device] to wake up the computer" on every applicable device (mouse, keyboard, HID-compliant device, NIC...)
Here's what the CMD-prompt says about armed devices:
As for the wake timers themselves:
since this a Windows process I can't just shut it down.I can't seem to find it in the Task scheduler though...
View 2 Replies
Mar 5, 2016
I did the w10 update fairly quickly when it was available. upgraded from windows 7 using their program. not fresh install. perhaps this is reason for weirdness.
My computer seems to be waking very often at odd times. using powercfg /lastwake i see one reason is:
"owner supplied reason: .../Media Center/mcupdate_scheduled"
My question: If media center was removed in w10 why does it still have a folder, and why are its pointless scheduled tasks still running? How do I remove these and other waking scheduled tasks?
View 3 Replies
Sep 25, 2015
Each morning when I wake up, my computer is on, rather than in sleep mode, as I left it. I have disabled the power of the mouse to wake it.
View 9 Replies
Nov 2, 2015
We have been using at home wireless logitech keyboard and mouse K270 and M505 respectively. All have worked great and have been using the unifying software. Since upgrading to Windows 10, I have been losing the pointer when my computer wakes from sleep or is unused for a length of time. Whilst I agree this definately looks like a window glitch. I have done all the usual things like refreshing drivers, new batteries etc.
View 1 Replies
Oct 10, 2015
My motherboard is a P8Z77-V, with Gigabyte 7950 video card, if that matters.
I did the windows 10 upgrade, and all seems well, except waking from Standby.
If I go into start menu, and choose sleep, everything spins down, and the computer shuts itself off. I am assuming this 'sleep' is some sort of hibernate.
But when I leave the computer over night I come back and the monitors are off,but lights on tower on. I am assuming this is standby mode? Anyway, I can't wake the computer from it, using mouse or keyboard (both USB). Clicking power button on tower does nothing. I generally have to click the reset button on tower and do a full boot sequence. When I log in, I do not get a message about windows not shutting down properly (maybe that message is no more in 10?), but clearly it is a fresh desktop.
I reset all bios settings, and update to most recent bios. I have the latest graphics drivers.
Here is some investigating I did, hopefully it works:
Code:
D:UsersShea.Wilbur>powercfg /aThe following sleep states are available on this system: Standby (S3) Hibernate Hybrid Sleep Fast StartupThe following sleep states are not available on this system: Standby (S1) The system firmware does not support this standby state. Standby (S2) The system firmware does not support this standby state. Standby (S0 Low Power Idle) The system firmware does not support this standby state.
Code:
C:WINDOWSsystem32>powercfg /sleepstudyS0 Low Power Idle is not supported on this machine. Cannot run tool. BIOS settings to check?
View 1 Replies
Sep 28, 2015
Why does my wifi disconnect when computer not in use?
View 2 Replies
Sep 13, 2015
My Lenovo Yoga 3 14 running Windows 10 x64 is disconnecting from the wifi for some reason. It will randomly disconnect from my wireless internet. None of my other devices are having this issue and my roomate's computer is fine as well.
View 1 Replies
Aug 16, 2015
We updated from 8.1 to Windows 10 and now the computer will not go automatically into sleep mode.
View 2 Replies
Jan 28, 2016
So as the title says, every now and then Windows 10 randomly decides to wake itself up from sleep. It doesn't happen at any consistent time, some days it stays asleep until I actually turn the PC back on. Using powercfg /lastwake just gives me a wake history count and doesn't provide any information.
I can't figure out why this is happening. I've tried googling it and have found similar complaints but no real solution. It's not hardware that is waking it up and I have already disabled the "allow wake" setting for my network adapters in device manager.
View 2 Replies
Sep 9, 2015
i don't want my mouse or touch-pad to wake my laptop from sleep when it gets triggered, I have been to 'mouse settings' & unchecked the part about waking up PC' & i hit apply & OK but no good. Now the touch-pad wont wake it up but my bluetooth mouse still does it. I'm at a lost as to what other settings i missed or if its a bug somewhere.
View 3 Replies
Jan 12, 2016
My question is in regards to shared folders. I run a desktop and laptop connected by ethernet, through a router. Both machines run Windows 10 Pro. Both machines have static IP addresses setup in the router. I do not use a software firewall and both computers are allowed onto the network.
I share folders on both machines in order to run client software on the laptop which connects to the flight simulator on the desktop. All of the shared folders have full control setup for everyone in both security settings and the shared folders tab.
There are HomeGroups set up on both machines with the correct information.
The problem (finally you say) is that occasionally, one computer cannot open the shared folders on the other over the network. This doesn't happen all the time, nor is the solution consistent. Sometimes closing and reopening the network folder fixes it. Sometimes just waiting does it. Other times, I have to reboot the computer(s). This creates issues with my client software trying to connect to the desktop. The error is: 0x80070035 Windows cannot find.....(to paraphrase).
I should point out that the other machine shows up in the network folder. I just can't access it when this happens. This happens mainly on the laptop attempting to connect to the desktop, although once in awhile the desktop cannot find the laptop.
I have checked and rechecked settings, deleted and rebult the HomeGroup, ensured password protected sharing is off, network discovery is on; amongst other things. I read about changing the shared computer name to its IP address. I also read somewhere about changing a number of registry entries that would force a change in Windows network behaviour.
View 9 Replies
Aug 4, 2015
After downloading Windows 10, my internet speed went significantly down, from 35 mbps to 4 mbps. I recovered my original Windows 8.1, hoping it was the new Windows that was causing the problem, but my computer is still very slow compared to what it used to be. I know the problem is in my computer because the three other PC's in my house are all working at normal speeds. I ran a virus scan with no luck. Could the Windows 10 upgrade have installed something that's still slowing down my internet?
View 1 Replies
Nov 7, 2015
Internet slows down for one computer but not all of them, I have some troubleshooting information below.
Code:
[CMD]C:UsersJason>ipconfig /allWindows IP Configuration Host Name . . . . . . . . . . . . : JasonMcKay Primary Dns Suffix . . . . . . . : Node Type . . . . . . . . . . . . : Hybrid IP Routing Enabled. . . . . . . . : No WINS Proxy Enabled. . . . . . . . : NoEthernet adapter Ethernet: Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Qualcomm Atheros AR8152 PCI-E Fast Ethernet Controller (NDIS 6.30) Physical
[Code].....
View 2 Replies
Aug 20, 2015
Post W10 Installation - my computer constantly wakes up from sleep. It just will not stay asleep no matter what, I thought it was my mouse so I went into my device manager and changed it so it didn't have the ability to wake up my computer. It stopped for a little while at least that's what it seemed, must have been coincidence because now its happening again. Which is weird because I went into power settings and turned "Wake Timers" off completely, it's now switched to disabled. Yet whenever I runcmd and type "powercfg -waketimers" as it reccomended here [URL] .... to find out which timers are on.
It says something about volume 2 on one of my hdd's, some stuff that doesn't make much sense to me. If you need me to paste the cmd info you're going to have to tell me how. Also when i type "powercfg -devicequery wake_armed" it lists "HID Keyboard Device" and "HID Keyboard Device (001)." Maybe the latter is what's waking my computer? I figured that was just another name for my keyboard or something, all I want is my computer to stay asleep and only my corsair keyboard to be able to wake it up.
Also everytime it wakes up I type "powercfg -lastwake" into the cmd and it doesn't give me any info. It says "wake history count -1" and the other 2 stats are 0, followed by no text or information. Also I forgot to mention but when it wakes up as of now, the display will actually stay off but the computers lights and everything are on. Whereas before when I thought it was the mouse waking it up, the whole computer would turn back on, display and all.
View 9 Replies
Feb 10, 2016
My system: Win 10 64 bit Retail, MSI B150M Mortar, Intel i5-6500, Samsung 512GB SSD, Corsair 2 x 4 GB Memory, etc.
Although my keyboard and mouse are allowed to wake the PC from sleep (in Device Manager), they don't wake the PC. Interestingly, pressing the "Power Button" on my Fractal R5 case does wake it up from sleep.
View 2 Replies
May 30, 2015
issue of no internet connection after update to 10130? The motherboard is using Realtek Gigabit Ethernet. A check indicated there is driver issue which block connection to my Linksys EA9200 router. There is no issue with the previous build.
View 9 Replies
Jan 29, 2016
I installed Windows 10 right after it came out and have had very few problems but in just the last few days it stopped waking from sleep. The power light used to flash and it would wake from a mouse or keyboard button press but no longer. The system power will come on from a press of the power button but the screen remains blank. If I remove power from the system and then repower it and turn it on it will start the BIOS and re-boot to the state that it was in when I put it into sleep mode. Clearly the hibernate process is working but something is haywire with the wake process. How to troubleshoot?
View 2 Replies
Feb 7, 2016
So I just installed a security program, and my windows 10 pc oddly goes to sleep and wakes back up instantly, twice. It seems like it stopped, but I would like to know if this should sound an alarm for any malicious activity.
View 5 Replies
Nov 2, 2015
I just updated to Windows 10 but I think the problem was with Windows 8 too, Sometimes my internet is out on my PC while the internet is still up on my brothers PC, tho this problem happens about 3 times a very few days.. We have 5+ computers in the house and 4 are on daily while 3 is being used daily the 4th one is not very used daily and sometimes off most of the time. So the 2 computers have Windows 10 and 3rd computer has Windows 7 while the 4th computer has Windows 10 also. I read on an article which says that Windows 10 uses bandwidth without you know and I checked task manager and on windows 8 my CPU and Memory was just fine and when I upgraded to Windows 10 my CPU spiked to about 20% and Memory spiked to about 72% and sometimes random numbers appear on all 4 sections( CPU, Memory, Disk, Network).
View 9 Replies
Jan 13, 2016
After automatic online updates by MS the system was automatically set offline by MS!
Notes:
a) hardware is ok - verified by other OS
b) network connections were ok during automatic update and are still ok verified by other OS systems
c) the automatic update is the only change in the software
d) the only message was from MS browser "we are sorry you are not connected to Internet"!
Questions:
(1/5) What can be done ?
(2/5) Windows 10 advices to use online support in the situation MS update set PC offline, why ?
(3/5) How can one use online support after having forced to offline ?
(4/5) Is there any way to prevent Microsoft update to modify network drivers / drivers is general ?
(5/5) Why did the update by MS set the system offline after having completed its operations!
View 2 Replies
Nov 11, 2015
I had this issue with my PC in January and went to all the trouble of a rebuild and a new motherboard. That was with Windows 8.1. However I now have this issue in Windows 10, it suddenly started a month ago. I am not moving the mouse or pressing any buttons. There is a 2-3 minutes gap and the system comes out from 'sleep' mode.
View 3 Replies
Aug 9, 2015
I'm running my audio via HDMI from my graphics card and it plays through the speakers built into my monitor.
When I first did the Win 10 update I had no audio whatsoever, and followed some suggestions on online forums that lead me to disable the Realtek High Definition Audio which I did and upon a reboot- my HDMI audio was working.
But then I had another weird issue. My PC is set to never sleep as I use it as a media server, but my screens turn off automatically after 10 minutes. What im finding is that when I wake up my monitors the audio stops. When I view playback devices I can't do any tests because "the device is already in use by another application"
(note: I have the checkbox for allowing an application to take exclusive control of a device un-checked).
So far there are only 2 ways to restore audio. 1) restart the PC. 2) go into device manager > Sound, video and game controllers > AMD High Definition Audio Device > Disable... wait a few moments > Enable.
View 9 Replies
