Networking :: Spontaneous 0x80070035 The Network Path Was Not Found
Sep 30, 2015
I have two computers, both run Windows 10, One runs Pro and the other Home (odd considering both were free upgraded from 7 Pro, but that is a currently unanswered for 2 month question for Microsoft to resolve...). Onto business, my main PC (Triton hereon out) spontaneously throws the 0x80070035 (network path not found) error. The other PC (Prometheus) is always on, its always connected. To add insult to injury, there is nearly always an open VNC connection (Prometheus runs headless, no monitor, hence VNC), so I know the computer is connected at all times and it is at least visible in one way as the VNC connection never drops. This problem has been going on since I got the free 10 upgrade. Both previously used Windows 7 Pro and had no connection problems with each other.
So here is what I have tried so far.
- Enable NetBIOS over TCP/IP
- Restart both PCs
- Exit homegroups and make a new one
- Uninstall VirtualBox incase it was trying to use its (VirtualBox) imaginary network on both machines (both are now running it again though after it didn't work)
- Disabling / exiting VNC Viewer/Server on both servers before connecting
The only odd thing I have noticed is my router/modem in one has six IPv6 addresses for Prometheus, whilst Triton only has two. Both have one IPv4 assigned, see this image for info. If it matters, I connect to Prometheus via VNC by name 'Prometheus' instead of its local IP. Incase Windows does it a different way? remember this is spontaneous, sometimes (i'd say about 30% of the time) it connects and I can view and copy/edit Prometheous' files no questions asked, the other times it will throw this error but after a few tries it will let me in.
View 2 Replies
Similar Messages:
Dec 20, 2015
I am unable to access one of three computers on my local network via File Explorer. I can access the other two and I can access a network local external drive.
The error is : error code 0x80070035 the network path was not found
This expands into: one or more network protocols are missing on this computer windows sockets registry entries required for network connectivity are missing...
The post from SimBy in Network Protocols says to disable netbios over TCP/IP. I don't know how to do that.
Windows 10 on HP Envy
View 1 Replies
Mar 5, 2016
Error code 0x80070035
I have two computers that I'm trying to get to communicate with each other so I can move files back and forth between them. My plan is to make one of them the home's backup and main storage system. the problem is that I can only seem to get one of them to actually communicate equally. Computer 1 is a factory Lenovo Intel i3 computer. Computer 2 is a home made AMD that I just built a few weeks ago.
Both are running Win 10 Pro.
Both are physically attached to the router. Heck, they're physically stacked on each other on my desk....
Using File Explorer, on the left side Panel under Network, it shows both computers: AMD and Lenovo.
Computer 1(factory) is able to the files on Computer 2 easily by going over through File Explorer. But, if I click on one of the files, I get the message that I DO NOT HAVE PERMISSION. If I try to cut/Paste files from Computer 1 to computer 2, I get the same message.
Computer 2. I am also able to see the computer listed under Network in the left panel. When I click on Computer 1 to access it, I get a Network Error Windows cannot access Lenovo (Computer1) Error code 0x80070035
I've tried the Diagnose option and it doesn't work.
If I click on a Drive under Network on the very computer, I can see the drives, I can see the directory list. If I click on a file, I get the error. Example on the left side panel on my AMD computer I select:
>AMD
>C:
>PerfLogs
It's at this point that I get the error: Windows cannot access amdcPerfLogs as an example
I've tried running through Homegroup setup and Googled for days on setting up a network with Windows 10 and can't seem to figure out what I'm not doing here to make these computers talk and communicate with each other. I eventually, want to get all my computers to talk to the AMD so I can use it for a main storage/backup for the home network.
View 1 Replies
Feb 10, 2016
Everything about my network worked fine on Windows 8. With Windows 10 I have been unable to access PC's on my router. Internet work fine, I see the PC's on network in homegroup, But gives me the dreadful and nonsensical error:
Worth noting that my windows 8 laptop can access these computers no problem. but my windows 10 pc's can access ANY pc's
Tried Everything
Winsock method
all elevated cmd prompt exe's
tcp4/6 config
drivers config
network settings configs
I am left with no choice but to go back to windows 8 ?
View 1 Replies
Feb 10, 2016
I have a Windows 10 Pro 64bit box as my NAS
Storage Spaces, ReFS, 2 drives mirrored
HomeGroup
HDD sleep on idle
Hibernate/Sleep disabled
My problem is when I typically save or open a file with the Windows file dialog on any Windows 10 machine, and I try to go to that machine through the network path //MyNAS/MyFiles, it initially gives me a cannot connect or find error.Is this due to the dialog not waking up the drives on the NAS? Something is obviously asleep here, and I usually end up opening Total Commander or Windows Explorer to "wake up" the connection and then everything works. I don't mind waiting, but I'd like the dialogs to hold tight until it connects, not give me not found or cannot connect.
View 1 Replies
Dec 17, 2015
Just had computer upgraded to windows 10. When I try to acces the old shortcuts, I get path not found error message
View 2 Replies
Oct 1, 2015
How do I find my network DVR in Network and sharing center?
View 4 Replies
Oct 16, 2015
Is it normal that if I type net start tcpip6 on the cmd the result system error 2, not found?
Also, I do not have the file tcpip6.sys on /system32/drivers. Why is that?
View 3 Replies
Nov 29, 2015
I just updated my media center to version 1511 of windows 10. Via wifi, downloaded and installed ok i thought. But have found i cannot see any wireless networks. Normally about 7 up in my area.
I've tried uninstalled the device and installing it again.
I've tried checking for newer drivers, but isn't any.
I've tried resetting these in command prompt (admin) net sch advfirewall, int ip, int ipv6, winsock and rebooted afterwards.
I've tried plugging the usb wifi adapter into a different usb port.
I've tried restarting the Router. Mobile phone picks up wifi in the same room.
View 1 Replies
Sep 5, 2015
Just upgraded to Win 10 and kept losing internet access. After troubleshooting my home network is now named "Network 2". How do I change the name to "Network 1 "?
View 3 Replies
Jan 14, 2016
Whenever I try to access a folder or save a file, I get the message "Windows cannot access PCDocuments. I am not doing this on a network, just on my Windows 10 PC. When I click cancel the error message goes away and the folder opens. Actual error message attached.
View 9 Replies
Jan 9, 2016
Running Windows 10 on a Dell Latitutde I was trying to setup a Netgear Wifi Extender because the Fios Router does not reach all the way to the other side of the house. I did the setup (so I thought) the way the manual told me and my computer was trying to connect to the extender, but it just stayed in "Connecting..." For a long long time. Eventually I gave up and thought I'd hit the reset button on the extender and try again.
Now my wifi adapter finds NO networks. All my other devices see all the networks.
The only other time this has ever happened I had accidentally hit the network adapter switch on the side of the PC, so I'm 100% sure that's not the problem and that it is 'on' in the settings. I've tried restarting the pc several times as well as toggling the adapter on/off, airplane mode on/off, and the switch on the PC on/off.. And it still sees no networks..
View 1 Replies
Dec 4, 2015
Today, while having lunch at my favorite restaurant, I tried to connect to their WiFi network as I usually do. I got the following message:Checking network resources.And then, after a few seconds: Can't connect to this network. My obvious question is, why not? To begin with, was it something wrong with my computer, or something wrong with their network?
For example:
DHCP server did not respond
DHCP server did not issue an IP addressStored password incorrect; enter new password: _________
WiFi adapter card not respondingInsufficient virtual memory
But no, none of that useful information was offered. How am I supposed to fix the problem?
View 2 Replies
Mar 5, 2016
I have a desktop PC running Win7 64Bit Ent. It's not actually in use, so nothing is connected. I also have a laptop running Win10 64Bit which I'm using to type this post. I have some audio files on my desktop that I'd like to pull off of there, and put them on my laptop, and then maybe on a cloud. My 1st question: Is it possible to simply use a USB cable between 2 USB 3 ports if I simply power up the desktop with the USB cable connected? Does the USB protocol provide for me to see those HDD's on the desktop via the laptop? I'm quite limited for physical space, and I don't need the desktop to be running permanently, I just need to get these files off of it. If that's NOT a solution, what is the next easiest method?
View 6 Replies
Dec 16, 2015
I have forgotten my network security key, all of the info I find points me to connections, wireless properties, etc..... This does not match my updated Windows 10. What is the procedures for the latest updated Windows 10?
View 1 Replies
Jan 4, 2016
I have two Win 7 computers on my wired network and 6 Win XP computers on this same network. This main computer was Win 7 and just upgraded to Win 10 in November. For a year this network has worked just fine, plug and play basically when I set it up, now after Christmas shutdown (2 weeks), I can't see any of the computers on this network. The only thing I can see is the media drive on a computer called 6Head2. All I really do is transfer files from this main computer out to those 8 other computers.
What is wrong with my computer? Network discover, file sharing all checked, network location was changed from Public to Private today by me. But it did work last year, even with the network location being public.
View 2 Replies
Jan 10, 2016
I have a home network that includes-Two Windows 7 PCsTwo Linux machinesA Brother MFC7820N networked multifunction printer..All the above are on wired connections. Then there's an 802.11n wireless link for laptops and media devices.I'm just setting up a new machine that's running Windows 10 Home, using the wireless network. I was annoyed to find that Brother don't have a full-function Windows 10 driver for the 7820N that supports scanning, but the Brother site says the built-in drivers in Win 10 should work for basic printing.
Problem: I successfully added the printer device to Windows 10 (at the 3rd attempt) using the "manual advanced" method. The printer has an entry in the hosts file, and was added by host name.The printer fails to print, with a "not responding" type message. The driver also can't pick up the status info from the printer.
What's really weird is-I can ping the printer from the W10 box (and the other machines) by either IP address or hostname.However, this printer has a web interface. I can access this from any of the Windows 7 machines, but the Windows 10 machine says "web site failed to respond" or somesuch. This happens with any of: Edge, IE11, or Chrome browsers.I can't even make a manual connection (telnet to port 80) from the Win 10 machine (timeout).The Windows 10 machine CAN access all the other devices on the home network, including the web servers (Apache) on both the Linux boxes.
This looks like the web access to that particular address is being blocked somehow. I have tried disabling my AntiVirus package (Kaspersky), but that makes no difference. Is Win10 perhaps detecting an "old" web server on the printer and refusing to talk to it? (and why would that prevent printing using lpd?)
View 9 Replies
Nov 8, 2015
Nothing is working to get my computer to connect to the internet again. It was working fine yesterday so don't know what was changed. All other devices can connect. Using my laptop to search.
IPv4 is connected but I can't get IPv6 to connect at all. No error messages anywhere.
Fixed. Updated drivers worked. Just had to restart a couple times for it to work.
View 9 Replies
Feb 10, 2016
I have a USB connected printer (HP F4100) on my Windows 10 desktop. Everything appear to be working as I have no issue accessing the printer remotely on my Windows 7 laptop. The issue is trying to access from my Windows 10 laptop. I can see the shared workgroup in explorer, but no sign of the shared printer.
How to troubleshoot this? I've gone through the basics such as disabling Windows Firewall, but no luck. Everything looks fine in the advanced sharing settings and as mentioned, things are fine from my Windows 7 machine.
My impression of Windows 10 is not great so far. This along with my machine rebooting due to a security patch even though I had "Notify to schedule restart" selected. The whole mandatory security updates kind of irks me. I kind of get it, but as a power user, I should have the choice. Especially with the amount of sketchy patches that MS has released over the years.
View 3 Replies
Mar 5, 2016
I have Windows 10 laptop hooked up to an ethernet connection which has been working well for the past 6 months. On 2/18/16 it stopped working. I traced the problem to the Qualcomm Atheros network Controller/ Killer E2200 Gigabit Ethernet Controller: Internet status > IPv4 Connectivity: No network connection IPv6 Connectivity: No network connection Clicked: diagnose --> System checked & reset, with IPv4 Connectivity and internet access restored.
This resolved the problem until 3/4, following a Windows 10 update. The above solution no longer works. Clicking 'Disable this net work device' and then enabling it again restores IPv4 Connectivity and internet access for a limited time but loading a new site or page is slower than it was prior to the emergence of this problem on 2/18, and then the connection is again lost after maybe 10 to 20 minutes.
View 1 Replies
Feb 10, 2016
I suffer total loss of network connectivity after a computer crash. I am on win 10 x64
Here is my ipconfig /all:
C:WINDOWSsystem32>ipconfig /all
Windows IP Configuration
Host Name . . . . . . . . . . . . : Xello
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
[Code] .....
Windows troubleshooter reports that "One or more network protocols are missing on this computer".
Some other info: I am unable to connect to 192.168.0.1, which is my router's home page. I can load this page on my laptop if i connect my laptop with ethernet, so the router is fine.
View 9 Replies
Dec 6, 2015
Noted immediately after 1511 total system update, yet may have been inherited from an earlier build...
All is working well, yet Network Troubleshooter reports "one or more network protocols is missing."
Various posted remedies have been verified or implemented, to no avail.
Win 7, on the same machine, reports no errors.
View 9 Replies
Jan 6, 2016
I'm using static IP for Network #1 which is 192.168.1.110
But when I try joining another network let's say network #2 with a router address like 192.168.43.1 i have to change network settings and use another static IP 192.168.43.10
Can't i just ask windows to use static IP 192.168.1.110 when i try to connect to network #1 and 192.168.43.10 when I connect to network #2 without having to manually configure it every time ?
I really have to use static IPs when connecting to those two particular networks...
View 1 Replies
Jan 1, 2016
What would cause my computer to have one or more network protocols missing and how can I fix it?
Below is the screenshot of the troubleshooting report.
View 9 Replies
Dec 9, 2015
I started my PC in a new premises with a Wireless modem, I have two other PC's connected.
When I started the PC it saw the wireless network and the option came up to connect and there was a tick in the "Connect Automatically" box.
I selected OK but got a message "unable to connect".
I did not get the opportunity to enter the Password/Key.
Now the PC will not connect to the Network nor will and Diagnose and repair fix anything.
BTW the Ethernet adaptor has been disabled.
The laptop I am sending this from is next to the PC so the wireless signal is okay.
View 4 Replies
Oct 2, 2015
How to send a message over the network to a pc? On the same network ofc, I tried this on my NUC "Net send Strix_V3 hello" and it didn`t show up anything on my laptop. I don`t want any third party software.
And, I`ve set up my NUC as a file server with a 1TB external hard drive, and I have shared the two partitions over the network, but when my stepdad is gonna access some of his files he get a message that the owner of the server needs to give him rights or something. How can I make my stepdad have the exact same rights as I have?
View 3 Replies
