Networking :: Surface Pro 3 Not Connected To Internet When Wire Is Plugged In
Nov 24, 2015
I am having this issue with a Surface Pro 3 on a dock, that when it is plugged in to a certain port it doesn't recognize the internet connection. If I take the surface to a different port and plug it in it works, if I get a different surface and plug it in to the port I am working with it works. Its only when the surface I am working with is plugged into that specific port, that it doesn't work. I need this surface plugged into this port, I can't plug it in anywhere else.
I have tried updating drivers, changing the dock, and also plugging in a USB to Ethernet adapter to bypass the dock. Nothing has worked. I also can't just get a different Surface because I don't have another surface with Win 10 on it. I need to have this Surface connected to this port but it will not work.
View 1 Replies
Similar Messages:
Feb 10, 2016
Recently my laptop has a boot error and auto recovery and maintenances could not solve the issue. So I reset the laptop but kept the files and now it boots perfectly fine however none of the internet is working. It shows that I am connected to the wifi but there is no access whatsoever. I even uninstaled my network adapters and even tried a wired conmection and everything seems to not work. All my other devices are connected to the router perfectly.
I am using a lenovo y50 touch with windows ten 64bit.
I have already tried updating drivers, deleting temp files, disabling firewall (antivirus was removed from reset), and already tried the ip config release and renew.
View 4 Replies
Oct 15, 2015
I am connected to the internet, but in the toolbar it says Not Connected and Connections are available.
I am referring this to the Wifi Icon on the Bottom Right Corner near the Clock (Notification Area). There is no yellow asterix and I am properly connected to the internet. When I click this Wifi Icon , a window pops up and on its top it shows my ssid and below it shows connected.
Disconnect option is also here.
I have already changed my Wifi adapter - previously it was Wayona and now I am using Prolink. Both works well.
View 1 Replies
Jan 30, 2016
I was having some network problems and in the course of fixing them I uninstalled the network driver for my TP-Link AC600 Archer T2UH USB network card. This card has been working without a problem for months on 2.4 and 5Ghz channels and at high speeds > 150Mbps. When I attempted to reinstall the drivers, I can get connected to the WiFi but I get the Windows 10 message "Secured, no internet I have tried numerous drivers and I have now tried to connect using two separate NIC cards. (I had an old 802.11n usb adapter) as well as a 5Ghz wireless bridge that I used to use that connects to the PC via ethernet. All of these have connected to the network, but I get the same "Secured, no internet" message.
The only thing I can think of at this point is that I've somehow screwed up the adapter. I've looked at that ipv4 settings are they are all set to "Obtain an ip address automatically" and do not have a DNS name specified. I have attempted all the windows repair options as well and they return telling me their may be something wrong with the driver or the adapter. I'm at wits end.
View 7 Replies
Dec 29, 2015
I'm connected to the WiFi, but I can't access the internet. I was trying to fix my rocket league connection so I followed this tutorial to reset the internet options of internet explorer and then to restore the options. I restarted my pc and now I can connect to my WiFi but none of my browsers or applications can access the internet.
View 3 Replies
Oct 6, 2015
I am now encountering a series of bugs that i've never seen before in any windows.
OS: Windows 10 Pro official 64
Connection type: Wifi, no firewall activated
Applications impacted: Steam unable to connect, Google chrome unable to connect to install software, Mozilla Firefox same thing, and probably more apps get the same problem but i can download them and install if the installer doesn't have to download anything. It seems like a services that is not working inside windows installer.
I am able to navigate in Microsoft Edge, and some other apps, but unable to install other application, it is like the firewall is blocking the internet acces but the problem is no firewall are activated right now , nothing has been changed to the router settings as other computers on windows doesn't experience that problem. See screen captures below...
Screenshot 1 : it says check you firewall setting to put chrome to your white list
Screenshot 2 : your download has been interrupted, click ok to continue ( nothing has downloaded not even 1% )
Screenshot 3 : it's in English already just read...
View 9 Replies
Nov 12, 2015
Roughly half the time I restart my PC I am told I am not connected to the internet, the Ethernet icon in the notification area shows a yellow triangle. but the thing is I am connected just fine and can access everything I normally do. Even microsoft.com. So this shouldn't be a problem if I can access all my stuff right? See things like Office and Skype use whatever detection method that is failing to determine if things can be sync'ed. The only answer I have is to reboot until the little yellow triangle goes away. There has to be a better way.
View 5 Replies
Feb 10, 2016
On Desktop computer have OODLES of storage and multi-media file but slow Wifi card.
Laptop (new) has mega fast Wifi - AC 5GHZ. Almost as fast as LAN.
Want to chromecast some movies to a TV in a friends house.
Can I direct Wire the laptop to the desktop so I can share the multimedia files and then use the laptops fast Wifi to beam it to the remote TV via chromecast.
I can't run Lan cables all over the place - but if a direct connection can allow me to use the WIFI adapter of the laptop then problem solved.
What sort of cable do I need -- I don't believe you can just stick a bit of Lan cable between the two computers (or can you).
Years ago there was a thing called LAPLINK -- relied on old serial COM ports --that would be too slow - and in any case no COM ports on these computers.
I don't care if it's "Heath Robinson" --it's not a permanent setup - but we want to watch a load of movies etc and his wifi isn't fast enough (the ISP internet service is superfine and his router is capable of high wifi speed), --We've been banished to his shed where the computer is - because the women want to do something else !!!!.
Note - normal sharing works but is a bit of an abysmal failure since I can only get about 500 Kbs -not Mbs !!!!!) from his wifi card on the desktop so normal sharing is TOO slow. The data won't get delivered to the laptops wifi fast enough to watch the movies without re-buffering every few secs - especially if it's 1080p with subtitles that usually need transcoding on the fly).
View 8 Replies
Aug 9, 2015
Ever since build 10130, Windows Search claims to not have access to the internet, yet my laptop DOES. I checked if my internet wasn't kidding me by searching up random shit on Google Chrome, and it turned out that god dam Windows Search was lying. I DID have access to the internet. Plus, when I try to search for an app on my PC, the Search Menu's background is just blank- nothing shows up! Tons of updates later- the problem still exists. I hope I'm not alone.
View 1 Replies
Apr 7, 2016
Desktop PC Specs:
Windows 10 64-bit
MSI Z87-G41 Mobo
14gb ram
256gb Kingston SSD
Realtek 802.11n PCIe WiFi card
I am having trouble with my DNS. I can connect to the Internet. I can ping all devices from my NIC to the default gateway, I can even ping other networks if I have the IP address. This includes Google's 8.8.8.8, but when I try to ping URL..., it cannot find the host. I have tried virtually everything I know and what my IT network professional friend knows. I have all the correct drivers. This all started about a month ago when I lost my LAN connection after a Windows 10 update. Then a couple weeks later I lost WiFi. Here is what I have tried so far:
-Any and all ipconfig commands
-Set Google DNS as my DNS
-Full reformat with clean install of Windows 10
-New wireless adapter (Sabrent NT_WLAC 802.11ac USB WiFi adapter)
-New Ethernet cable
-Uninstall and reinstall drivers for LAN and WiFi
View 1 Replies
Mar 3, 2016
My friend's computer will not load web pages:
1. Google and Yahoo searches do work but
2. Clicking on a search result produces a something like "This page cannot be displayed".
3. The problem goes away in Safe Mode.
4. I have run the following commands in batch mode:
netsh int ipv4 reset reset.log
netsh int ipv6 reset reset.log
ipconfig /flushdns
nbtstat -R
nbtstat -RR
netsh int reset resetlog.txt
netsh int ip reset
netsh winsock reset
5. Other devices have no problem with the router.
6. I have scanned the computer with Malwarebytes, Windows Defender and Avast.
View 3 Replies
Jan 11, 2016
I logged onto my laptop as usual this morning and opened up Firefox. However, on trying to open a website it responds as of I'm not connected. My WiFi says 'no Internet, secured'. I tried the mac and it has the same connection issues, but for some reason I can use the WiFi on my phone alright?
View 3 Replies
Aug 30, 2015
All was working fine but suddenly chrome and edge browsers won't connect to the Internet. Skype works fine.......
View 1 Replies
Jul 31, 2015
I'm having one problem in Windows 10. When I connect my computer to the internet using a switch, it loses connection after a few minutes, but if I connect it directly into the router it work's just fine. Before the update to windows 10 I had no problems at all using the switch.
View 1 Replies
Oct 7, 2015
Boot time for windows 10 seems much slower when connected to the Internet.
View 3 Replies
Jan 30, 2016
My laptop is indicating that it is connected to my home network and that it has internet access but when I go to the network center it says that it doesn't have any connections. Attaching an ethernet cable doesn't work (which was an earlier problem too) I already updated my drivers and ran the troubleshooter but it didn't work. I also restarted my router so I did most things I can. Side note: It happened really suddenly from one moment to the other...
View 1 Replies
Oct 21, 2015
I am having trouble getting my internet connection to work with an ethernet cord. I have no problem using wifi, but I get disconnected on wifi pretty frequently. I have two ethernet cords in my possession, one of them is new, and neither works. I've tried connecting to the router and the modem.
I've used used troubleshooter with both wires while plugged into the router and the modem. I've created a connection that has our given username and our password in it.
I turn off the wifi specifically by clicking on the wifi icon on the bottom right of my computer screen. It seems that the ethernet cord is not detected.
View 5 Replies
Apr 2, 2016
For a while, whenever I connect my wireless headphones using Bluetooth to my Windows 10 laptop, the internet goes a lot slower for an unknown reason.
View 9 Replies
Dec 1, 2015
Something strange is happening to my surface pro 3 running windows 10 Pro 64bit. At first, I was trying to surf on the net and received something like server connections timed out. I then checked on my wifi status by hovering my mouse over the wifi icon at the system tray and it said "internet access". This is usually a good sign. But still unable to load any external pages on the firefox browser.
I then had to run the diagnosis over the wifi network and the wifi came back alive. By the way, by disconnecting and reconnecting the wifi wouldn't fix the internet connection issue.
After 3 minutes or so, the internet was down again. I had to run diagnosis over the wifi network and it worked again.
After this, I tried to check to see if there was any updates that I need to install. I found that it's in the middle of downloading "upgrade to windows 10 pro, version 1511, 10586". This is the latest major upgrade from Microsoft.
By now, I kinda got tired of running diagnosis on the wifi network. I got to hook it up with the ethernet wire connection. Now, I can access the Internet and the windows update started downloading without any interruption. But I can't rely on the ethernet cable for the stable internet connection.
My question is would this wifi dropout issue be caused by this windows update download. By the way, I have also disabled Hyper-V on this machine.
View 1 Replies
Jul 29, 2015
After upgrading my surface PRO to windows 10 today it doesn't seem to be able to connect to the network. Going in to setup a connection windows displays the error "windows did not detect any networking hardware". I enabled, disabled, re-enabled, and re-installed the network adapter but it didn't seem to work.
View 16 Replies
Nov 17, 2015
I have a Surface 3 Pro with 2 external monitors hooked up using StarTech USB VGA adapters. Since the update, my mouse does not show up on my remote Windows Server 2008 R2 VM's when the Remote Desktop window is on one of the external monitors (works on the Surface Screen). The cursor is there, just cannot see it.
View 2 Replies
Oct 20, 2015
My office LAN is p-p LAN, every time i want to use the printer connected other PC on LAN, i must enter credentials to connect, how to disable it? Both 2 PCs are Windows 10 Pro, turned off password protected sharing and turned on file and printer sharing.
View 2 Replies
Jan 19, 2016
I've scoured the web and pulled together enough info to enable me to create an incoming VPN connection on our dedicated P2P file "server" which runs Windows 8.1 Pro. On my Windows 10 Pro laptop, I've also created an outgoing VPN connection to the server. When I click the "Connect" button in "Network and Internet" Settings, the connection is established immediately with no error messages and a resulting status of "Connected". On the server side, the incoming connection also shows connected. Sounds like success, but no matter what I try, I can't find a way to actually access any of the drives/files on the server.
I expected the server to show up in the list of "Network" computers, thereby enabling me to map a drive to the shared folder(s), but no such luck. I made sure when I was creating the incoming connection on the server that I enabled "File and Printer Sharing", as well. Also, FYI, the server's WAN connection is on a static IP, and I've done the necessary port forwarding to the server's internal IP address. The one especially odd thing is that when I view the connection details on my laptop, it shows a subnet address of 255.255.255.255, and I don't have a clue whether or not that's correct. There's oddly little information that I can find that describes all of the possible entries that are required in the many and various dialogues that are presented while trying to setup the VPN.
View 1 Replies
Jan 10, 2016
I can't change my profile location to private, and I can't make my computer register that it's connected with either my WiFi or my Ethernet. I've looked through the steps posted here, but to no avail. I don't even have the NetworkList key in my registry! I am online with Firefox and Chrome just fine, but Edge won't connect, nor can I connect to the Store. I did a wipe and reinstall a few days ago, partially to try and resolve this issue, and partially to resolve some other issues dating back to the Insider builds, but this problem is still happening. I'm at my wits end, and I can't even connect to my wife's PC to transfer files. I've enabled network discovery and file sharing on public networks, but that didn't even make a difference. Also, since I reinstalled Windows, I've been unable to activate it, but I think that is tied to this network problem. It's like all the new apps and features won't recognize the connection. I'm not running any security software besides Windows Defender, so that shouldn't be an issue.
View 3 Replies
Jan 31, 2016
Is there a way I can change all connected networks to private instead of public with a click-able script? The problem was that a User was connected to an open network using a VPN which then also connected showing Public. With both as Public, they could not map to a network resource. I fixed it using the "go to home-groups and change network settings, etc." But surely there is a way it could be handled with a simple script to edit same? End result was the VPN showed private while the open WiFi he connected to still showed public but he could access the server now.
View 1 Replies
Feb 10, 2016
I have a "Wi-Fi not connected" message in Control Panel Network and Internet > connections. The computer is a Windows 10 HP envy 700 - 414. The Wi-Fi is Broadcom 802.11. the driver is 7.35.336.0 12/7/2015 .... How do I connect it?
View 3 Replies
