Networking :: Unable To Access Network Drive In Explorer?
Dec 1, 2015
I have a NAS (WD MyBookLive) which cannot be accessed in Windows Explorer on my brand new Surface by IP address (or name- though that doesn't work on any of my devices for some reason). I can access the config page in my browser by IP, and two other Win10 devices on my network can access the NAS by IP in Explorer fine, and I can access other devices on my network by IP fine on the Surface but for whatever reason only this computer can't access that NAS in Win Explorer.
I just got the Surface yesterday and was able to access the NAS fine, the only thing that's changed is I renamed the device and restarted and since then haven't been able to connect. I've restarted both the PC again and the NAS but no change.
View 9 Replies
Similar Messages:
Nov 8, 2015
my Windows 10 Enterprise PC cannot access to my company's network storage at 10.63.0.250. In the previous edition like windows 7 or 8, I can access easily by enter 10.63.0.250 in the Address box in File Explorer or in Run windows (Window button + R). However, I have got trouble since I upgraded to Window 10. The notification is "The network path was not found", although I can ping to this and another PC can access the network storage in File Explorer.
View 8 Replies
Dec 3, 2015
Today i did a fresh install of win 10 Home today on my laptop but i'm unable to see my NAS Drive in my network. I can put the nas address into the address bar in my Network and i can access it but i don't like to do it that way. I also use Kodi media center and now my nas is not showing in my network i can't add media content.
View 9 Replies
Aug 9, 2015
On my desktop (AKA S4, currently running Win8.1 x64 pro) I have shared out four of the hard drives with full permissions. I have 5 PCs in my network and all can access the four drives. My sister is visiting and currently accessing my network via cat5 wire. On her PC (running Win 10 x64 pro) if I view the network in Windows Explorer I can see my desktop (S4). When I double-click on S4 I'm prompted to enter network credentials. "Enter your credentials to connect to: S4" I entered my logon S4 ID and password but it tells me that the user name or password is incorrect. What the heck should I be entering? All computers are part of the same work group (WORKGROUP) and all computers are wired connected. All computers can access the internet.
View 9 Replies
Dec 26, 2015
I have a usb connected hard drive connected to my Bell 2000 router. The instructions to access this drive is to go to the Documents folder and enter mynetwork. This then shows the shared hard drive as mynetworkNETWORKHD. If I now click on NETWORKHD I get the following:
mynetworkNWTWORKHD is not accessible. You might not have permission to use this network resource. Contac the administrator of this server to find out if you have access permissions.
Not enough storage is available to process this command. This all worked for me under Windows 7. I am unsure if it ever worked under Windows 10.
If I plug a 2 gb thumb drive into the other port on my Bell 2000 rounter it works without any problem.
View 1 Replies
Nov 24, 2015
My internet worked fine and I didn't do any changes to it up until it stopped working. I've managed to fix the internet access to allow me to access the internet on my laptop through wi-fi but network access still says no internet access. Websites work however ethernet does not work! I can't connect online on my playstation because ethernet doesn't work. I've tried disabling and enabling the ethernet. I checked the cables, I re-installed the drivers and i turned off and on the router more than I could count.
The internet works on my laptop however a connection test on my playstation 3 says obtain ip address succeeded and internet connection failed. So I can't play online. I am absolutely certain the playstation 3 is not fault as I checked vigurously the settings and I've put in the right connections, however it still does not work? Should I buy new cables for the router?
View 8 Replies
Nov 26, 2015
After the latest Widows pro 10 update I am unable to access my home network drives. Both the Synology and Buffalo drives were accessible but now are not viewable from the desktop.
View 3 Replies
Jan 10, 2016
I have a home network that includes-Two Windows 7 PCsTwo Linux machinesA Brother MFC7820N networked multifunction printer..All the above are on wired connections. Then there's an 802.11n wireless link for laptops and media devices.I'm just setting up a new machine that's running Windows 10 Home, using the wireless network. I was annoyed to find that Brother don't have a full-function Windows 10 driver for the 7820N that supports scanning, but the Brother site says the built-in drivers in Win 10 should work for basic printing.
Problem: I successfully added the printer device to Windows 10 (at the 3rd attempt) using the "manual advanced" method. The printer has an entry in the hosts file, and was added by host name.The printer fails to print, with a "not responding" type message. The driver also can't pick up the status info from the printer.
What's really weird is-I can ping the printer from the W10 box (and the other machines) by either IP address or hostname.However, this printer has a web interface. I can access this from any of the Windows 7 machines, but the Windows 10 machine says "web site failed to respond" or somesuch. This happens with any of: Edge, IE11, or Chrome browsers.I can't even make a manual connection (telnet to port 80) from the Win 10 machine (timeout).The Windows 10 machine CAN access all the other devices on the home network, including the web servers (Apache) on both the Linux boxes.
This looks like the web access to that particular address is being blocked somehow. I have tried disabling my AntiVirus package (Kaspersky), but that makes no difference. Is Win10 perhaps detecting an "old" web server on the printer and refusing to talk to it? (and why would that prevent printing using lpd?)
View 9 Replies
Nov 8, 2015
Nothing is working to get my computer to connect to the internet again. It was working fine yesterday so don't know what was changed. All other devices can connect. Using my laptop to search.
IPv4 is connected but I can't get IPv6 to connect at all. No error messages anywhere.
Fixed. Updated drivers worked. Just had to restart a couple times for it to work.
View 9 Replies
Oct 10, 2015
I have a desktop and a laptop setup at home, I have recently upgraded both to Windows 10. Both were previously running Windows 7 Home Premium and could identify each other on the network and I could access files on either PC from one or the other at any time.With the upgrade to Windows 10 I am still able to see the other machine on the local network, but I am unable to access their folders and move files between machines. The error message I get is as follows.When I run the network diagnosis no errors are detected and it asks me if I want to explore other options.
The full error message is:I do have shared libraries available across both machines that are part of my homegroup, so I can access the video files in the hard drive of my desktop from my Laptop but only to play them - not to move them around.I suspect this is either a user validation issue, or a firewall issue and I'm not sure how to go about checking whether this is the case or not.
View 6 Replies
Jan 25, 2016
Three machines:
Surface Pro 4 - fully updated
Surface Pro 3 - Windows 10, fully updated
Lenovo X220T - Windows 8.1 Fully updated
All three machines can see all available network devices, including each other.All three machines can successfully access and interact with third party network devices. In this case, it is a NAS and a network printer.The windows 8.1 machine can access each of the other windows 10 machinesNeither Windows 10 machines can access any other windows share on the network.
This gets me error 80070035 with diagnostics telling me nothing
All three machines are on a Homegroup and while each can see, no one can access anything
Trouble shooting tried:
Double checked all sharing settings on all three computers. They are identical.Double checked workgroupsTried it via IP addressesReset winsock on all machinesFlushed DNS on all machinesReset the routerUninstalled and reinstalled Windows sharing and about 3 other network protocols and servicesEnabled NetBiosran this: sc.exe config lanmanworkstation depend= bowser/mrxsmb10/nsi sc.exe config mrxsmb20 start= disabledMessing around with all sorts of netsh commands clearing and flushing all sorts of other things
View 5 Replies
Feb 14, 2015
I have two computers running Windows 10 Pro Technical Preview Build 9926. One computer is a desktop and it is working perfectly. The other is a new HP 15-F039WM laptop and it came with Windows 8.1 With Bing installed and it also works perfectly in Windows 8.1 mode. I resized the hard drive on the HP laptop to free up 150Gb of space and then installed Windows 10 TP Build 9926 from DVD. It still works perfectly when I use dual boot to go into Windows 8.1. When I use dual boot to go into Windows 10, the network icon in the system tray says "Unidentified network - No Internet access". I did swap cables, etc, but I knew that wouldn't work because the laptop does have Internet access when booting to Windows 8.1.
I read through some threads here after searching for DHCP and connectivity issues and even tried some of the suggestions such as using regedit to look at the network profile. There isn't a network profile. It is displaying a 169... IP Address, so I know that it isn't getting an IP. I tried to manually add the correct settings that work for Windows 8.1 (192.168.0.15 with 192.168.0.1 as the Gateway), but that fails.
View 9 Replies
Aug 17, 2015
I am having problem adding folders from a network drive to the Quick Access.
Firstly I can only drag and drop into the QA in explorer, as right clicking option doesn't work and it only allows one folder at a time to be included. Local folders are not a problem and any number can be included in QA.
Also pinning files to taskbar apps has a similar problem if they are on the network drive.
View 9 Replies
Nov 15, 2015
I've got 2 Western Digital Network drives hard wired on my network, a My Book World and an EX2.
Since upgrading to Windows 10 I've had intermittent problems viewing and setting network drives. I've read a lot of other posts and tried a number of things suggested without success.
The WD Discovery tool finds the Network drives, but the box to map network drive is greyed out. I can access the desktop control panel from my browser. If I try to add a network location the drives are not listed. If I try to add the drive letter WDMYCLOUDEX2Public the network path is not found?
I have another Windows 10 computer on the network which can access the drives without issue - so it must be a setting on my PC. Tried disabling my Kaspersky security - still not being seen? I suspect that this has been as a result of a windows upgrade?
View 6 Replies
Dec 26, 2015
I am trying to set up our server which we have on my sisters new laptop. when I go to 'map network drive' and click 'browse' the server called 'BGE-B-NAS' doesn't appear on the list. I have tried multiple times and nothing seems to be working. I also tried to type it in manually but it just said that 'windows cannot access BGE-B-NASCompanydata'. Is it to do with the fact that this is a laptop and it is using the wifi instead of being wired?
View 1 Replies
Feb 10, 2016
I have a strange issue on my Windows 10 computer: I can only see 1 computer under my home network, but other computers do not appear at all. However, I can access them fine typing in the address bar manually.
Also, for some reason, "LEESERVERPC" does not appear on my network folder, but it appears on the left pane. Is this a Windows 10 issue? Other computers are running Windows Server 2012R2 or Windows 7 and they easily find all computers in the network. I rebooted and resetted my router countless number of times. Refreshing doesn't seem to do anything.
Background: Originally, my Windows 10 computer was seeing all the computers in the network. As I was trying to set up another computer on the network, I refresh my network several times from my Windows 10 computer, and all a sudden all the computers except 1 disappeared on my Windows Explorer "Network". Every other computer in the network has no issues.
See Pic:
I want to emphasize that I CAN ACCESS the shared network computers. It's just that Windows Explorer's "Network" does not show most of the computers!
View 3 Replies
Feb 10, 2016
Everything about my network worked fine on Windows 8. With Windows 10 I have been unable to access PC's on my router. Internet work fine, I see the PC's on network in homegroup, But gives me the dreadful and nonsensical error:
Worth noting that my windows 8 laptop can access these computers no problem. but my windows 10 pc's can access ANY pc's
Tried Everything
Winsock method
all elevated cmd prompt exe's
tcp4/6 config
drivers config
network settings configs
I am left with no choice but to go back to windows 8 ?
View 1 Replies
Feb 8, 2016
Every so often Windows 10 will give a notification about Limited Network Access on a wired Ethernet connection. The notification is not true as I am able to use non-Microsoft applications such as Firefox just fine with the Internet. However Microsoft applications such as Outlook, Windows Updates, Edge and IE do not detect an Internet connection and are unusable. I found that if I turn off real-time protection in Windows Defender and then reboot the computer it clears the error for a time but it always comes back within a day or two.
View 2 Replies
Dec 5, 2015
I've just moved house and isp. I am trying to connect my pc to my router via an ethernet switch.
At first my pc would not even connect to a network so deleted and reinstalled the ethernet drivers.
Managed after several attempts to change my network from public to private, but i still have no access to the network.
View 3 Replies
Dec 23, 2015
Each time I try to log in to a particular networked computer ( #3) from Computer #4 , a windows security essentials pop up and asks for credentials even though I checked on allowing access without passwords in computer #3 . In any case when I typed in the user name and password for computer ( #3) , I keep getting error indicating wrong user or password. However the reverse from computer #3 to #4 is OK . All my networked computers do not require password and I am not using workgroup or homegroup just simply network shares.
View 2 Replies
Jan 3, 2016
I have been using a wireless connection but have decided its better for online gaming if i go wired/ethernet.
I am having a problem "unidentified network/ No internet access"
Now in the past with an xp pc i connected the ethernet cable and that was it i assumt there is some sort of set up i need to do for win10?
Also it may be worth letting you know i am not directly connected to the router via an ethernet cable, i am using the plug in things that sends the signal down the house electrical wires. Maybe this is an issue although it wasnt on my xp pc.
View 1 Replies
Nov 7, 2015
I have 5 computers and 4 are running Windows 10. The machine I use as the main one I upgraded from Windows 7 ULT to Win 10 and have had little trouble but, my number 2 machine I added the insider preview 5 builds ago and since then, when trying to view all machines in explorer only the Computers come up yet, on the main machine no problem, all machines that are on the network show up. The pic on the left is the No 2 machine and the one on the right is the No 1 machine. I use assigned IP addresses on all the hardware that show up in No 1.
View 4 Replies
Dec 16, 2015
Missing network device - EXTERNALDRIVE Since the last Windows 10 update which I installed on Dec. 9 I am missing one devices in Explorer > Network on one of three network computers.
They are all present on the other two computers. One of these is Windows 10., the other is Vista Premium.
The complete device list under network is Frankspc, Charlottespc, and Sue_ASUS and ExternalDrive.
The missing device on the Explorer list on Frankspc is EXTERNALDRIVE. I can ping it at 192.168.1.3 . how to get it back in the Explorer list?
View 8 Replies
Jan 31, 2016
I have been having issues with my WD MyCloud NAS not showing up under Network on the left navigation pane of File Explorer. I am able to access the NAS by entering the host name (WDMYCLOUD) in the address bar in File Explorer. I was able to find a solution that fixes this and makes my NAS appear in Network as expected. The solution involved running Command Prompt as Admin, executing some commands, then restarting the computer.
What I would like to do is automate this process by creating a batch file that will:
Open Command Prompt as AdminAutomatically enter specific commandsClose Command PromptRestart the computer
View 2 Replies
Nov 16, 2015
I've recently upgraded my home PC from Windows 7 to Windows 10. I've been using a Realtek USB Wi-Fi adapter to connect to the internet. After installing the new OS and running it for the first time, I couldn't connect to my home network.
After reinstalling the drivers supplies by the manufacturer and reattaching the adapter, I attempted to again connect to the network. The "Verifying and connecting" message displayed, but after closing Settings and returning to the same page, all of the Wi-Fi settings have disappeared, like the drivers have crashed.
View 9 Replies
Feb 10, 2016
From one of my Windows 10 machines I am unable to access the shared folders on the other. The troubleshooter says "One or more network protocols are missing on this computer" and "Windows Sockets registry entries required for network connectivity are missing."
I have run sfc /scannow, but no problems were found. I don't get the problem when sharing in the other direction or when accessing the shared folders on the same machine.
This comes amidst a cluster of sharing-related problems. Before the reboot after which the present problem manifested itself, shares going in the other direction were invisible in the network browser (but could be accessed via the search bar). Also, the machine in question does not appear in the HomeGroup browser even though it is a member of the HomeGroup.
View 3 Replies
