Networking :: Unable To Do Ethernet Direct Cable Connect - Homeuser
Nov 12, 2015
I have been unable to do a direct cable connect. Settings are not available. In settings, to do a cable connect it asks for a name and ISP. There isn't any. I never had a problem doing this before and I can do it with my apple computer. It has now been 2 days trying to figure out how to do what should be the easiest connection. No problem with any wireless----not everyone has wireless! Your microsoft stores have a long way to go to match the apple stores. If you can't get a connection to the internet it is very difficult to communicate or download any patches.
View 6 Replies
Similar Messages:
Mar 16, 2016
A couple days ago I noticed that instead of having the ethernet in my taskbar that it is connected to wifi. I dont understand that because I have been using hardwire forever. To top it off my xbox connects via ethernet, but my pc wont. have tried the same cable that connects my xbox. I am pretty sure this is causing serious game lag, and i dont know what to do at this point. i cant access my router settings either. i type 192.168.1.1 and it doesnt load. that is the same ip address that i have always used before.
So this solution did work in a sense. Once reinstalled my drivers, my computer did detect that there was a ethernet plugged in, but it said the there was no connection. I disabled wifi on the computer, so it can only connect to ethernet. even tho it says that there is not internet connection through ethernet, everything is working great. It permanently has the Caution symbol over my internet.
View 1 Replies
Aug 16, 2015
My computer wont connect to the internet via ethernet cable. It works when the cable is directly connected to the modem, but when I run the cable into the wall output it wont connect. Ive tested that there actually is internet through the cable in the wall by connecting it to my Macbook, and it works perfectly. what can I do to fix this?
View 1 Replies
Feb 10, 2016
Where to start so to begin with my issues started when we got a new router. We had issues with the old one so we installed a new router and got it working fine WiFi worked alright but Ethernet would not connect it my computer when I ran the troubleshooter said one or more network Protocols were missing from my computer I'm running windows 10 version 1511. I went on google on my laptop to start finding a fix and I must have tried every option in the book just about I am losing my mind over how to fix this. Finally I tried reinstalling the Network drive Uninstalling my current one going on google finding my most updated one ect. and now the issue is no longer about the protocols but its saying my Ethernet doesn't have a valid IP configuration
View 2 Replies
Sep 18, 2015
2 days ago, I was happily enjoying my internet when suddenly my internet stopped working, I checked it and it showed that the ethernet cable is unplugged. I have by now, tried reinstalling win 10 (lost all my files and drivers ) and few more things like automatically searching for updates online. I have a realtek family controller
View 1 Replies
Dec 30, 2015
So i recently updated to windows 10, and i noticed i wasn't connected to my Ethernet anymore, so i had to connect my PC to the wifi. Under my "network Adapters" it only shows "Qualcomm Atheros 802.11 1/b/g/n" I tried connecting another ethernet cable, but nothing happened.
View 1 Replies
Jan 11, 2016
I cannot seem to connect on Ethernet though Wi-Fi works OK. I have seen several articles about ethernet problems with Win10.
CABLING
First the network config:
Two notebooks, C and D are plugged into a switch and the switch plugged into the router. Now, the cabling is verified to work because computer C, running Win7 connects just fine and if the internet cables are swapped, computer C still connects just fine.
Computer D however does not connect. I did some other things to redundantly check too, just FYI.
So cabling looks OK.
ROUTER
both computers have fixed (reserved) IP addresses in the router.
The router sees computer C
but not computer D
Just FYI, if I turn on Wi-Fi, the router sees D on WiFi, but not the ethernet.
PING
Computer C can ping D
Computer D can ping C
Computer C can ping the router
Computer D cannot ping the router
Some investigation suggested the following, all of which I tried with no better results:
- Update the network adapter drivers (already current)
- Winsock posible culprit, so NETSH WINSOCK RESET and reboot - no change
IE used to find and fix these things pretty well, but here we have EDGE. Perhaps I'll try to install IE. Connectivity diagnostics are where IE shined over Chrome and Mozilla.
UPDATE: IE 9, 10, etc. are not compatible with Windows 10. So, the connectivity diagnostics just not as good in Win10. I can tell I am getting tired, as it's getting hard not to swear.
UPDATE: Added a pretty picture.
View 9 Replies
Feb 17, 2016
I have two computers working on Windows 7 that are directly connected to each other via an Ethernet cable utilising Windows Sharing and all works fine.
However, I have two other computers on Windows 10 that are also directly connected to each other vian an Ethernet cable and I cannot get them to see each other.
All the settings are the same as the Windows 7 devices but there may be something different in Windows 10 that makes what was a very simple process now more difficult.
How to successfully get two windows 10 devices connected and found if there is some subtle setting that I am missing.
View 1 Replies
Aug 18, 2015
i just built my pc and installed a fresh windows 10, i tried to connect ethernet cable to my pc but win 10 still cant detect the cable.
View 1 Replies
Jul 31, 2015
My acer notebook after upgrade from win8.1 to win10, my ethernet port keep disconnected and sometimes cant detect cable till i restart ny notebook. reinstall driver still same..
View 1 Replies
Oct 4, 2015
My problem is i use a hardline into my computer and upon starting it up yesterday was greeted with the problem “no ethernet cable installed or connected”. I have replaced the cable already/restarted both the computer and router multiple times/did a system restore and none of those worked. Also disabled and re enabled the adapter multiple times.
The only thing that seemed to work or hint at the problem was a windows 8 forum that said to use an elevated command prompt to do “sfc/scannow” and that came back with errors. There was a “DSIM” command that was unable to find a correct download location.
View 1 Replies
Oct 24, 2015
The other day I was connected to the internet via Ethernet cable I bought around 3 weeks ago and it was working well with no problems, but for the past two days when I plug in my ethernet cable, my laptop doesn't detect it and it says "Network cable unplugged".
View 1 Replies
Sep 21, 2015
Win 10 32 bit will only load properly with Ethernet cable. Discovered this looping issue when I moved the PC and went to use Wi-Fi. Plug cable back in and everything goes back to normal. Troubleshooter doesn't find anything wrong.
View 8 Replies
Oct 23, 2015
I purchased a new computer running Windows 10 (build 10240) today and have set up the windows. However, it will not allow me to connect to my WiFi. When I use the network option in the task bar, no wifi networks are shown and it says that there are no connections available. When I access the network settings, where the different sections are listed on the left-hand side, WiFi is not an available option.
Updating drivers Deleting drivers and then allowing the computer to reinstall A few different command prompt methods such as resetting the TCP stack, as well as trying some that were for people who upgraded from windows 7/8.
View 5 Replies
Nov 9, 2015
Changed my wifi name and password. After that I`m unable to type the password. After clicking connect it loads for a while showing "checking network requirements" and it ends with "cant connect to this network". Password box does not even show up!
View 2 Replies
Feb 23, 2016
I recently upgraded to windows 10. i started having a series of problems but they eventually fanned out but I still am unable to connect to the internet via wifi. I have to use the ethernet cable.
View 2 Replies
Jan 12, 2016
Well, not exactly. I have NAS drives and mapped them just like I did on my Windows 7 laptop. It all works fine and the NAS drives show up just fine in network link too. Everything is Ethernet connected. But I see anomalies. If I reboot my machine, or even turn it off and switch it back on fairly soon after then I occasionally get a message about one of the drives being unable to connect. So I then go to 'this pc' and see a Red Cross through one of the drives. If I double click it then it either connects instantly or I will get the green bar filling for about 20-30 secs before it connects. I only have to do it once as after that access is instant every time I go to it. Now this doesn't happen all the time and it never happens if I turn the machine off and start it up after leaving it alone for an extended period. It just seems to be more likely after doing a restart or turning back on within minutes of it last being on.
but I do also notice that when I am in outlook and someone sends me a file (such as jpg pic) that I want to save to my NAS drives. I will click the attachment and select ' save as' and navigate to one of the NAS drives and it will not browse its contents straight away, you can kind of see it trying to open up and eventually after a few seconds it suddenly responds. And again it only occurs once, subsequent navigations all react instantly , for example I go into a second attachment to save down. It's hard to explain but I am inclined to think Windows 10 is just plain buggy . It's not as if the networking is a complete fail. It works but it's just unpredictable. My other Windows 7 machine (which I will never ever let Windows 10 get into it) behaves flawlessly with the NAS drives. They are always live and instantly accessible to it regardless of whether the machine has recently been on or restarted.
View 2 Replies
Feb 1, 2016
This issue arises randomly and only once has it ever recovered. Event viewer also does not show anything either. Restarting fixes this issue, but I would rather find out what caused this issue in the first place.
I cannot connect to any sites using HTTP or HTTPS but I can connect to my remote FTP server and PING works for any website. I have used 'netsh' in an attempt to fix my issues but it requires a restart where it would fix it temporarily.
I also cannot access any local IPs or my localhost web server. I can however access some of Google's websites on Google Chrome Dev but not on any other browser. For the other sites I get a TIMED_OUT error. I have reinstalled my network drivers and reset my network settings (including DNS) but nothing else works.
I even turned off Bitdefender Firewall and Antivirus and Malwarebytes and issued a system scan but does not impact anything.
View 9 Replies
Oct 14, 2015
So I've built my first ever PC and I chose the ASUS Z170-A as motherboard. When I was finished I installed Ubuntu. The ASUS motherboard do not have wifi compatibility integrated so I used the ethernet cable to connect to internet. That worked just fine, everything worked very smoothly. Then I decided to install Windows 10 instead. I bought the Windows 10 Pro, wiped out all the Ubuntu reserved partitions on the SSD disk, and install Windows.
But now, while having the ethernet cable inserted to the motherboard, it wont recognize it. The green and orange lights next to the ethernet cable input are even turned on (indicating that the PC does have a connection). But still the OS wont recognize that it is there. So even when Ubuntu succeeded to recognize the cable, Windows 10 din not. I speculated that I need some kind of software to detect the cable, but I am probably wrong.
View 1 Replies
Jan 13, 2016
After automatic online updates by MS the system was automatically set offline by MS!
Notes:
a) hardware is ok - verified by other OS
b) network connections were ok during automatic update and are still ok verified by other OS systems
c) the automatic update is the only change in the software
d) the only message was from MS browser "we are sorry you are not connected to Internet"!
Questions:
(1/5) What can be done ?
(2/5) Windows 10 advices to use online support in the situation MS update set PC offline, why ?
(3/5) How can one use online support after having forced to offline ?
(4/5) Is there any way to prevent Microsoft update to modify network drivers / drivers is general ?
(5/5) Why did the update by MS set the system offline after having completed its operations!
View 2 Replies
Feb 10, 2016
On Desktop computer have OODLES of storage and multi-media file but slow Wifi card.
Laptop (new) has mega fast Wifi - AC 5GHZ. Almost as fast as LAN.
Want to chromecast some movies to a TV in a friends house.
Can I direct Wire the laptop to the desktop so I can share the multimedia files and then use the laptops fast Wifi to beam it to the remote TV via chromecast.
I can't run Lan cables all over the place - but if a direct connection can allow me to use the WIFI adapter of the laptop then problem solved.
What sort of cable do I need -- I don't believe you can just stick a bit of Lan cable between the two computers (or can you).
Years ago there was a thing called LAPLINK -- relied on old serial COM ports --that would be too slow - and in any case no COM ports on these computers.
I don't care if it's "Heath Robinson" --it's not a permanent setup - but we want to watch a load of movies etc and his wifi isn't fast enough (the ISP internet service is superfine and his router is capable of high wifi speed), --We've been banished to his shed where the computer is - because the women want to do something else !!!!.
Note - normal sharing works but is a bit of an abysmal failure since I can only get about 500 Kbs -not Mbs !!!!!) from his wifi card on the desktop so normal sharing is TOO slow. The data won't get delivered to the laptops wifi fast enough to watch the movies without re-buffering every few secs - especially if it's 1080p with subtitles that usually need transcoding on the fly).
View 8 Replies
Aug 20, 2015
I was using free upgrade from windows 7. After installing Windows 10 on my laptop, I cannot connect with wifi but can with ethernet. What should I do?
View 1 Replies
Jan 17, 2016
I'm on a Windows 10 Pro PC accessing a linux server with samba etc installed and working well (visible via Homegroup to both Android and Windows 7 pro). From the Win 10 box, if I type the name of the server in Windows File Explorer, then the shares from the server show up without issue. However, if I go into the Network folder, it does not see the linux servers - even though they are correctly configured for the correct homegroup. My windows 7 machines can see the servers in "network" as can my android devices.
Here's a screenshot. Note, the red arrows show what displays in Network folder (red arrows). If I click on the Server Name (HunterNAS in this case), the server shares are displayed and it shows up in the Network folder (blue arrows). Even after making the successful connection, display of another file explorer window > Network folder displays no linux server shares...
View 9 Replies
Mar 9, 2016
[URL] ...
My friend just got this computer and hes trying to connect his WiFi to it but its only gives him the ethernet option. How he can connect to wifi instead of ethernet? Its running windows 10
View 1 Replies
Sep 2, 2015
After the cumulative update on 30 Aug 2015 WiFi isn't working... Even if I connect to Ethernet port it is not recognising. What to do
View 5 Replies
Nov 7, 2015
I have a odd bug which is causing some of Windows 10's Features to not work. I am using an Ethernet cord, I can still connect but in the bottom it's showing Limited connection and when I click on it, It's showing No Internet and nothing is popping up.
[URL] ...
View 1 Replies
