Networking :: Unable To Host Virtual Network For Internet Sharing
Sep 2, 2015
I've been getting the following error : "The group or resource is not in the correct state to perform the requested operation" Things I've already done trying to solve the problem:
1) Clean install of Windows 10.
2) Made sure my WiFi network card doesn't go to Sleep, by disabling that option in the Power Management.
3) Have set hosted network mode to allow
4) Made sure that my network with internet access is set to sharing
Additional info: It was working fine untill some random windows update, after which the PC started getting BSOD when trying to host a network. Reinstalling drivers started giving me this error instead of BSOD. Then I rolled back to windows 8.1 and checked again. It was working flawlessly. I assumed it to be a driver problem, so I upgraded to Windows 10 again and this error is back.
View 7 Replies
Similar Messages:
Oct 1, 2015
How do I find my network DVR in Network and sharing center?
View 4 Replies
Nov 19, 2015
My windows 2003 server stopped working in normal mode, but working in "safe mode with networking" and giving reply from all peers, and reaching all remote locations. in Normal mode not even ping to peer and giving error "destination host unreachable". tried with new NIC. IP conflict coming when assigning used IP address, if giving a new IP address not even request going to peer showing the same error as "destination host un reachble".
View 1 Replies
Jan 26, 2016
I need this for work. I don't want to have to buy a laptop with Windows just to do this. I am running UbuntuGnome 15.10 on my laptop. I need to connect to file shares on a Windows 10 Desktop on the same network. This desktop has one user. The user has it set up so that when computer is powered on, it automatically logs into the user's account without a password. I need to access a folder that is shared on that machine.
When I attempt to access it from laptop, I am prompted for a USER ID and PASSWORD for the WORKGROUP. If I enter the user's ID without Password, i cannot access the folder. I have tried different combinations but cannot get access. I want to automount this when I log into my laptop as I need access to work.
View 4 Replies
Oct 31, 2015
I've got a problem in stopping sharing some folders across my home network. Not sure if it matters, but I'm on Windows 10 Pro, running my admin user account.
Anyways, I have a folder I want to unshare from my network called Pictures2 which I believe is empty. The problem is I don't seem to have access to it even though it seems to originate from my PC.
While I was able to unshare the 'Videos2' folder by going into the Properties normally, I can't stop sharing 'Pictures2' from my network even though my computer is the one sharing it. Double-clicking gives a "Windows cannot access XXX" error.
I did notice a difference between these folders which may or may not be important - The Pictures2 folder doesn't have an owner (either that or it can't display it in advanced security settings) while the Videos2 owner was SYSTEM.
My user account was in the 'shared' list of both these two folders which is strange, as I couldn't access Pictures2 but could access Videos2.
Honestly I don't know how or when they were even created and I can't find them on my local drive if they're even meant to be there.
I tried using the manual cmd method suggested in another thread but get this:
I would like this Pictures2 folder unshared, and if I know where it's located on my PC I can delete it too.
View 1 Replies
Dec 29, 2015
Trying to set up a network for the first time. My intention was to share public folders but when I right click on my user folders (e.g. PCUsersDaveDocuments they are shown as "Shared" and clicking on "Stop sharing" doesn't seem to do anything. Am I missing something.
View 3 Replies
Nov 6, 2015
I have a Windows 10 PC, with one of it's functions being that of a file server/NAS for my home network. I set it up with password protected sharing and a user account/password that everyone knows and uses to access it. I didn't really have any reason to use password protected sharing at the time, but it was the default so I left it.
Now I have a couple of network streaming devices that can't handle password protected sharing, so I was considering turning it off. Is there any reason not to turn off password protected sharing on a private network? Obviously I don't mind everyone on the network having access, but I was wondering if it had any other potential security benefits that I haven't thought of.
View 1 Replies
Sep 12, 2015
I cant create a virtual wifi network using this command : netsh wlan start hostednetwork (the "set" command works)
the solution is to enable Microsoft Hosted Network Virtual Adapter which is missing , and yes i tried to show hidden devices ..
View 3 Replies
Jul 30, 2015
i've upgraded to Windows 10 (x64) from Windows 8.1.Using HP Probook 4540s..Before, i used Virtual Machine OK ( with Network: LAN, Wifi).But when Windows upgraded 10, i cannot use Network with any options.Check Device Manager - Driver Network OK.
View 1 Replies
Oct 14, 2015
But I'm currently browsing the internet and typing to you.
In fact - I can do virtually everything (League; Steam; Skype; etc) except use any OS feature that requires logging in -
e.g. Mail, User Accounts, Shop, etc. Then it says something along the lines of "Cannot use this service without an internet connection - please connect and try again." When I run Network Diagnostics as the prompt recommends - it says I am connected and cannot find a problem.
It doesn't always happen - but it seems to be determined on start-up. If I restart it now it might be working next launch - but 75% of the time it will encounter the same issue. It's been happening for months now but I've sort of gotten used to using my phone to check my emails - but I've now encountered an issue with one of my hard drives being unable to be searched (tried indexing, etc) and the only step I've found that I haven't tried says it could be a corrupted user account - but I cannot update my user account without "connecting to the internet". -_-
The system is up to date. No driver updates available.
View 9 Replies
Dec 3, 2015
Today i did a fresh install of win 10 Home today on my laptop but i'm unable to see my NAS Drive in my network. I can put the nas address into the address bar in my Network and i can access it but i don't like to do it that way. I also use Kodi media center and now my nas is not showing in my network i can't add media content.
View 9 Replies
Nov 15, 2015
I've got 2 Western Digital Network drives hard wired on my network, a My Book World and an EX2.
Since upgrading to Windows 10 I've had intermittent problems viewing and setting network drives. I've read a lot of other posts and tried a number of things suggested without success.
The WD Discovery tool finds the Network drives, but the box to map network drive is greyed out. I can access the desktop control panel from my browser. If I try to add a network location the drives are not listed. If I try to add the drive letter WDMYCLOUDEX2Public the network path is not found?
I have another Windows 10 computer on the network which can access the drives without issue - so it must be a setting on my PC. Tried disabling my Kaspersky security - still not being seen? I suspect that this has been as a result of a windows upgrade?
View 6 Replies
Nov 30, 2015
If I go to the network and sharing center on one of the computers on our home network it reports that it is not connected to a network, but this system can see other computers on the network and access the internet. The other computers cannot see this system, however. This system has an older X38 motherboard with an E8400 processor, but the initial in-place upgrade from Windows 7 had no problems at all.
I didn't notice the problem until I realized that about two weeks of backups across the network had failed. I have tried the repair tools in Windows 10 and have uninstalled and reinstalled the network adapter without success. I was hoping that the problem would be fixed by installing the recent big windows update, but windows update reports that it cannot connect even though I have internet access.
View 7 Replies
Feb 14, 2015
I have two computers running Windows 10 Pro Technical Preview Build 9926. One computer is a desktop and it is working perfectly. The other is a new HP 15-F039WM laptop and it came with Windows 8.1 With Bing installed and it also works perfectly in Windows 8.1 mode. I resized the hard drive on the HP laptop to free up 150Gb of space and then installed Windows 10 TP Build 9926 from DVD. It still works perfectly when I use dual boot to go into Windows 8.1. When I use dual boot to go into Windows 10, the network icon in the system tray says "Unidentified network - No Internet access". I did swap cables, etc, but I knew that wouldn't work because the laptop does have Internet access when booting to Windows 8.1.
I read through some threads here after searching for DHCP and connectivity issues and even tried some of the suggestions such as using regedit to look at the network profile. There isn't a network profile. It is displaying a 169... IP Address, so I know that it isn't getting an IP. I tried to manually add the correct settings that work for Windows 8.1 (192.168.0.15 with 192.168.0.1 as the Gateway), but that fails.
View 9 Replies
Jan 30, 2016
I was having some network problems and in the course of fixing them I uninstalled the network driver for my TP-Link AC600 Archer T2UH USB network card. This card has been working without a problem for months on 2.4 and 5Ghz channels and at high speeds > 150Mbps. When I attempted to reinstall the drivers, I can get connected to the WiFi but I get the Windows 10 message "Secured, no internet I have tried numerous drivers and I have now tried to connect using two separate NIC cards. (I had an old 802.11n usb adapter) as well as a 5Ghz wireless bridge that I used to use that connects to the PC via ethernet. All of these have connected to the network, but I get the same "Secured, no internet" message.
The only thing I can think of at this point is that I've somehow screwed up the adapter. I've looked at that ipv4 settings are they are all set to "Obtain an ip address automatically" and do not have a DNS name specified. I have attempted all the windows repair options as well and they return telling me their may be something wrong with the driver or the adapter. I'm at wits end.
View 7 Replies
Oct 16, 2015
My aunt did the free Windows 10 update from Windows 7. After the update she had no internet connection so she decided to roll back to Windows 7. After the roll back, she still has no connection. Her connection icon says "unidentified network" and will not connect to the internet. It is plugged directly into the modem.
View 5 Replies
Dec 23, 2015
Each time I try to log in to a particular networked computer ( #3) from Computer #4 , a windows security essentials pop up and asks for credentials even though I checked on allowing access without passwords in computer #3 . In any case when I typed in the user name and password for computer ( #3) , I keep getting error indicating wrong user or password. However the reverse from computer #3 to #4 is OK . All my networked computers do not require password and I am not using workgroup or homegroup just simply network shares.
View 2 Replies
Feb 10, 2016
My husband & I try to remotely support his father's HP desktop. In the last month or so he can get email, TeamViewer for remote access works fine we can ping websites by name and IP but cannot browse to them by name or IP. We have done all the things recommended on MS site for Fix Network Connection (Fix network connection issues.
We have reset router and cable modem, verified network drivers, flushed DNS, verified browser DNS settings. This computer is hardwired, other computer on wifi on same network works fine. We are 5 hours away. We made a generic "recovery drive" on a flash drive and sent it to him but usb keyboard and mouse won't work for him to use that option. Tried ps2 mouse, won't work. We don't know where to go next. Initially ran Network troubleshooter few times with no errors found. Now it gives Missing Protocol, says it fixes it, but doesn't.
View 6 Replies
Feb 10, 2016
I have suddenly noticed a problem with internet connection. I cannot download any apps from Microsoft store (with unknown error message). Strange is that each other software (cloud clients, browser, ....) works perfectly.
I have already searched for solution on google and found command wsreset.exe but this did not work..
I have also tried network troubleshooter. It has found these errors:There is one or more missing network protocols. Windows sockets registry entries are missing
I have tried to repair these errors with some netsh commands, which actually did something but did not solve anything.
Another solution is to reinstall network drivers but this did not work either.
View 4 Replies
Jan 15, 2016
I'm on Windows 10 x64 and my network device is a Intel GbE LAN chip (10/100/1000 Mbit).
My issue is : I have a yellow triangle over the network icon in the notification area and it says me "Network : No Internet" even if i can access to internet and my network works perfectly.
That's not very serious issue but that's disturbing to know if i'm connected or not (real disconnections can happen). After trying to reboot my rooter and uninstalling/reinstalling Intel's newest drivers i don't know what to do.
View 9 Replies
Dec 1, 2015
I have a NAS (WD MyBookLive) which cannot be accessed in Windows Explorer on my brand new Surface by IP address (or name- though that doesn't work on any of my devices for some reason). I can access the config page in my browser by IP, and two other Win10 devices on my network can access the NAS by IP in Explorer fine, and I can access other devices on my network by IP fine on the Surface but for whatever reason only this computer can't access that NAS in Win Explorer.
I just got the Surface yesterday and was able to access the NAS fine, the only thing that's changed is I renamed the device and restarted and since then haven't been able to connect. I've restarted both the PC again and the NAS but no change.
View 9 Replies
Feb 23, 2016
I recently upgraded to windows 10. i started having a series of problems but they eventually fanned out but I still am unable to connect to the internet via wifi. I have to use the ethernet cable.
View 2 Replies
Aug 18, 2015
For some reason the Airplane mode setting can not be turned off in Network and Internet Settings, Network setting from taskbar, or Action center from taskbar. I am using my desktop and will never have it on an airplane. However, the computer does have a wifi adapter which I could use and it is able to be enabled.
Also, have other wifi devices on my home network, another PC and a tablet, a wireless printer and all are working fine. It must be a 'bug' on the desktop but someone should know that it is there. On the other PC, which is an all in one, the Airplane mode is not even in the settings anywhere.
View 4 Replies
Jan 3, 2016
I have been using a wireless connection but have decided its better for online gaming if i go wired/ethernet.
I am having a problem "unidentified network/ No internet access"
Now in the past with an xp pc i connected the ethernet cable and that was it i assumt there is some sort of set up i need to do for win10?
Also it may be worth letting you know i am not directly connected to the router via an ethernet cable, i am using the plug in things that sends the signal down the house electrical wires. Maybe this is an issue although it wasnt on my xp pc.
View 1 Replies
Jan 13, 2016
After automatic online updates by MS the system was automatically set offline by MS!
Notes:
a) hardware is ok - verified by other OS
b) network connections were ok during automatic update and are still ok verified by other OS systems
c) the automatic update is the only change in the software
d) the only message was from MS browser "we are sorry you are not connected to Internet"!
Questions:
(1/5) What can be done ?
(2/5) Windows 10 advices to use online support in the situation MS update set PC offline, why ?
(3/5) How can one use online support after having forced to offline ?
(4/5) Is there any way to prevent Microsoft update to modify network drivers / drivers is general ?
(5/5) Why did the update by MS set the system offline after having completed its operations!
View 2 Replies
Oct 26, 2015
I have the following problem. I upgraded to Windows 10 and now I can't access the disk of my other computer.
- Both PCs have the disks access open for everyone (home network).
- Both have the same password.
When I try to enter the C: drive of my other PC, I get an error that I don't have the privilages to do so.(I see them on the network, but I can't access them).
View 1 Replies
