Networking :: Unable To Login To Network Computer
Dec 23, 2015
Each time I try to log in to a particular networked computer ( #3) from Computer #4 , a windows security essentials pop up and asks for credentials even though I checked on allowing access without passwords in computer #3 . In any case when I typed in the user name and password for computer ( #3) , I keep getting error indicating wrong user or password. However the reverse from computer #3 to #4 is OK . All my networked computers do not require password and I am not using workgroup or homegroup just simply network shares.
View 2 Replies
Similar Messages:
Mar 17, 2016
I forgot the login password/credentials to another computer on my home network.
View 3 Replies
Dec 3, 2015
Today i did a fresh install of win 10 Home today on my laptop but i'm unable to see my NAS Drive in my network. I can put the nas address into the address bar in my Network and i can access it but i don't like to do it that way. I also use Kodi media center and now my nas is not showing in my network i can't add media content.
View 9 Replies
Nov 15, 2015
I've got 2 Western Digital Network drives hard wired on my network, a My Book World and an EX2.
Since upgrading to Windows 10 I've had intermittent problems viewing and setting network drives. I've read a lot of other posts and tried a number of things suggested without success.
The WD Discovery tool finds the Network drives, but the box to map network drive is greyed out. I can access the desktop control panel from my browser. If I try to add a network location the drives are not listed. If I try to add the drive letter WDMYCLOUDEX2Public the network path is not found?
I have another Windows 10 computer on the network which can access the drives without issue - so it must be a setting on my PC. Tried disabling my Kaspersky security - still not being seen? I suspect that this has been as a result of a windows upgrade?
View 6 Replies
Dec 1, 2015
I have a NAS (WD MyBookLive) which cannot be accessed in Windows Explorer on my brand new Surface by IP address (or name- though that doesn't work on any of my devices for some reason). I can access the config page in my browser by IP, and two other Win10 devices on my network can access the NAS by IP in Explorer fine, and I can access other devices on my network by IP fine on the Surface but for whatever reason only this computer can't access that NAS in Win Explorer.
I just got the Surface yesterday and was able to access the NAS fine, the only thing that's changed is I renamed the device and restarted and since then haven't been able to connect. I've restarted both the PC again and the NAS but no change.
View 9 Replies
Sep 2, 2015
I've been getting the following error : "The group or resource is not in the correct state to perform the requested operation" Things I've already done trying to solve the problem:
1) Clean install of Windows 10.
2) Made sure my WiFi network card doesn't go to Sleep, by disabling that option in the Power Management.
3) Have set hosted network mode to allow
4) Made sure that my network with internet access is set to sharing
Additional info: It was working fine untill some random windows update, after which the PC started getting BSOD when trying to host a network. Reinstalling drivers started giving me this error instead of BSOD. Then I rolled back to windows 8.1 and checked again. It was working flawlessly. I assumed it to be a driver problem, so I upgraded to Windows 10 again and this error is back.
View 7 Replies
Feb 10, 2016
When I run the troubleshooting I keep getting the message that says:
"One or more network protocols are missing in this computer".
When I run the "netsh winsock reset" in the Administrator Command Center, I get the messages:
" The following DLL cannot be loaded: NETIOHLP.DLL" and "The following DLL cannot be loaded: NSHIPSEC.DLL".
View 2 Replies
Feb 23, 2016
this issue has plagued me forever since windows 10, and even slightly in windows 8.1. this issue would come randomly and i cant connect to internet even if i were a point blank in front of the router. running the troubleshooting does not fix it. the only way to fix it most of the time is to disable the wifi adapter for about 2 minutes and re enable it again. in some cases only a reboot can fix it and in rare cases it can only be fixed by uninstalling the wifi drivers and starting over.i have tried with 3 different wifi adapters, 2 computers and 2 routers.
it seems to struggle the most with connecting to optimum wifi/Xfinity wifi (which my laptop is added to my account) its mainly this optimum wifi here causing issues making router itself a issue but still. the other router is my 4g sprint hotspot, sometimes on rare occasion the same thing happens.
View 6 Replies
Jan 2, 2016
This happened after the latest major update.
I've tried the following steps with no success 1) sfc /scannow. This showed no errors
2) netsh advfirewall reset netsh int ip reset*** netsh int ipv6 reset netsh int ipv4 reset netsh winsock reset *** This command did not work originally until I went to HKEY_LOCAL_MACHINE/SYSTEM/CurrentControl and changed Control/NSI folder 26 permission to everyone (This box was unchecked again after reboot
3) ipconfig /flushdns ipconfig /registerdns ipconfig /release ipconfig /renew
4) Disabling and Renabling the Network Adapter within device manager.
5) Uninstalling the driver
6) Installing the latest drivers both from the Asrock/intel website and googling my network adapter.
7) I saw the fix where someone deletes the Windows 10 WIN and WIN2, and replaces with a clean Windows 7/8 version in this registry: HKEY_LOCAL_MACHINESystemCurrentControlSetServicesWinsock HKEY_LOCAL_MACHINESystemCurrentControlSetServicesWinsock2
- Did not work also, it gave me a new problem no ethernet something which troubleshoot can't also fix.
8) Finally Reset W10. Still get the same error
View 9 Replies
Aug 21, 2015
I have a network that has 3 laptops running Win 10. 2 of the computers (haven't checked the third yet) indicate they are on the same network SSID. One computer can print from the printers on the network.
The second laptop had the same printers and was able to print to them prior to Win 10. Now the SSID is the same as the first computer yet it can't print nor can it see any printers oe devices on the network!
View 4 Replies
Dec 28, 2015
I have w10, running a static ip address through time warner cable in Ohio. Time warner said they had a problem on their end, ever since then I can't connect to our security cameras. I run a powerline from the house to the office., have reset my computer, modem and wireless router. Still getting the same error - one or more network protocols are missing from this computer. I tried talking with time warner cable - no go!
View 9 Replies
Jan 20, 2016
Why suddenly out of the blue my network quit showing one of my computers? I have a tablet and laptop both with windows 10. my tablet still shows both computers, but my laptop no longer shows the tablet. I didn't change anything. What can cause this and how do I fix it?
View 4 Replies
Nov 13, 2015
I recently upgraded windows 8.1 with Bing, which had a homegroup, to windows 10. After the upgrade I was unable to set up a homegroup. Message, "this computer is unable to set up a homegroup"...
View 1 Replies
Mar 5, 2016
Error code 0x80070035
I have two computers that I'm trying to get to communicate with each other so I can move files back and forth between them. My plan is to make one of them the home's backup and main storage system. the problem is that I can only seem to get one of them to actually communicate equally. Computer 1 is a factory Lenovo Intel i3 computer. Computer 2 is a home made AMD that I just built a few weeks ago.
Both are running Win 10 Pro.
Both are physically attached to the router. Heck, they're physically stacked on each other on my desk....
Using File Explorer, on the left side Panel under Network, it shows both computers: AMD and Lenovo.
Computer 1(factory) is able to the files on Computer 2 easily by going over through File Explorer. But, if I click on one of the files, I get the message that I DO NOT HAVE PERMISSION. If I try to cut/Paste files from Computer 1 to computer 2, I get the same message.
Computer 2. I am also able to see the computer listed under Network in the left panel. When I click on Computer 1 to access it, I get a Network Error Windows cannot access Lenovo (Computer1) Error code 0x80070035
I've tried the Diagnose option and it doesn't work.
If I click on a Drive under Network on the very computer, I can see the drives, I can see the directory list. If I click on a file, I get the error. Example on the left side panel on my AMD computer I select:
>AMD
>C:
>PerfLogs
It's at this point that I get the error: Windows cannot access amdcPerfLogs as an example
I've tried running through Homegroup setup and Googled for days on setting up a network with Windows 10 and can't seem to figure out what I'm not doing here to make these computers talk and communicate with each other. I eventually, want to get all my computers to talk to the AMD so I can use it for a main storage/backup for the home network.
View 1 Replies
Oct 1, 2015
How do I find my network DVR in Network and sharing center?
View 4 Replies
Sep 5, 2015
Just upgraded to Win 10 and kept losing internet access. After troubleshooting my home network is now named "Network 2". How do I change the name to "Network 1 "?
View 3 Replies
Jul 16, 2015
If you installed Windows 10 and are not able to login with PIN, I found this solution: Source
View 1 Replies
Jan 31, 2016
So I started my pc today and my window search didn't work anymore, just blank no results and everything felt very slow. so i restarted into safe mode without network and now it restarted asking for my windows login which is linked to my email. But i have no network so its not logging in. i have tried f8 when restarting but don't get any options to choose which boot mode you want as you could in windows 7.
I am trying to create usb windows 10 recover/install on my other laptop but its failing.
View 2 Replies
Dec 12, 2015
My laptop is not recognizing my password. I have gone to Microsoft website several times and changed but laptop still not recognizing it. Only one user on my laptop...purchased year ago and went from 8 and recently uploaded 10. Month ago forgot password and went to account.live.com /password/ reset and had no problems resetting and logging on.
View 2 Replies
Feb 10, 2016
I have just used the SHIFT-Restart option to activate the Windows 10 Troubleshooting and tried to open a command prompt. It asked for a password. I entered my password but was told it was incorrect.
I booted normally using the PIN I normally use, and went through Settings | Accounts | Sign-in options | Change to change my password. In the 'Old password' box I used the same password that had just failed to get me into the boot command prompt and it allowed me to change the password. It said I had successfully changed my password.
If I use SHIFT-Restart again, I still cannot get into the command prompt using the new password.
Am I dealing with two separate passwords here? If so, how do I change the one associated with the boot command prompt?
Note that when trying to boot to the command prompt, the displayed use name appears to be correct - i.e. it is the same one listed when I use my PIN to boot normally.
View 3 Replies
Sep 27, 2015
since I upgraded my daughter has been unable to login to Movie Star Planet. when she logs in it just hangs and sits there and never loads.
View 2 Replies
Jan 9, 2016
I have configured 2 languages - english and hebrew and set password in hebrew.
However, when trying to change language in lockscreen to login, i am not able to switch to hebrew.
Tried on screen keyboard via easy access but could not switch to hebrew as well.Therefore, i am not able to login now.
View 2 Replies
Nov 26, 2015
After the latest Widows pro 10 update I am unable to access my home network drives. Both the Synology and Buffalo drives were accessible but now are not viewable from the desktop.
View 3 Replies
Nov 8, 2015
I have a Microsoft account set up with a pin. Every time I boot my computer up, I am greeted with the login screen and my photo, with the message below it, "We are unable to connect right now. Please check your network and try again later." And it's asking for my password, not my pin. For some reason, I see my username twice on the lower left corner. One is the password log-in, the other is the pin. I can successfully log in with either. I just want to know, what is with the error message? I've got a connection, so I can't figure out why.
View 6 Replies
Nov 13, 2015
[URL]....
Currently i am having this problem, unable to login to any MS app like store, people, outlook etc.
Dont want to install w10 again.
View 3 Replies
Jul 17, 2015
Just installed 10240 or TH1 and I am still unable to specify a network location for the background pics. If this is a bug, I can't believe they haven't fixed it.
View 3 Replies
