My aunt did the free Windows 10 update from Windows 7. After the update she had no internet connection so she decided to roll back to Windows 7. After the roll back, she still has no connection. Her connection icon says "unidentified network" and will not connect to the internet. It is plugged directly into the modem.
View 5 RepliesI have two computers running Windows 10 Pro Technical Preview Build 9926. One computer is a desktop and it is working perfectly. The other is a new HP 15-F039WM laptop and it came with Windows 8.1 With Bing installed and it also works perfectly in Windows 8.1 mode. I resized the hard drive on the HP laptop to free up 150Gb of space and then installed Windows 10 TP Build 9926 from DVD. It still works perfectly when I use dual boot to go into Windows 8.1. When I use dual boot to go into Windows 10, the network icon in the system tray says "Unidentified network - No Internet access". I did swap cables, etc, but I knew that wouldn't work because the laptop does have Internet access when booting to Windows 8.1.
I read through some threads here after searching for DHCP and connectivity issues and even tried some of the suggestions such as using regedit to look at the network profile. There isn't a network profile. It is displaying a 169... IP Address, so I know that it isn't getting an IP. I tried to manually add the correct settings that work for Windows 8.1 (192.168.0.15 with 192.168.0.1 as the Gateway), but that fails.
I have been using a wireless connection but have decided its better for online gaming if i go wired/ethernet.
I am having a problem "unidentified network/ No internet access"
Now in the past with an xp pc i connected the ethernet cable and that was it i assumt there is some sort of set up i need to do for win10?
Also it may be worth letting you know i am not directly connected to the router via an ethernet cable, i am using the plug in things that sends the signal down the house electrical wires. Maybe this is an issue although it wasnt on my xp pc.
So yesterday my internet stopped working which is ethernet to d-link hardline ac adapter to router. Xbox is connected same way and it works perfect. Tried all the usual reset/restart stuff. Keep getting unidentified network no internet. My router reads my PC so i know its connected. Updated the ethernet controller drivers to win 10. No luck. My wireless adapter doesnt work either but i hooked it up and while it connects to my router and has a good signal it will work for a few mins and than drop out.
View 8 Repliesyesterday my Ethernet connection stopped working suddenly was using and any moment stopped working I have tried many things and I can not make it work, this is the model of the adapter (Intel (R) Ethernet Connection I218-LM) and this is the error in the diagnosis of Intel.
connection Status: Failed.This test Relies on a response from a gateway, DNS, DHCP, or WINS server and no such response was received. any such server connection for this May be unavailable or misconfigured.This adapter is configured to Obtain an IP address automatically but no DHCP server is present on the network.Windows selected an IP address using Alternate Private IP Addressing.
i've been with this problem for months and i have tried multiple solutions offered by others on the internet, yet i'll give it another try here.
i'm using a powerline adapter directly plugged into the wall on my desktop. And it has worked excellent before, but suddenly someday it did not get a valid IP adress anymore for my pc, i have tried giving it an ip adress manually but without succes. i also tried updating the driver but there was no update.
my network and sharing center displays unidentified network and windows problem solver detects the problem 'network name' does not have a valid ip configuration.
I upgraded my laptop from windows 7 to windows 10 with the free upgrade that came out a while back. I recently bought an Ethernet cord to enhance my gaming performance, but when I plug it in it says identifying for a little while then says unidentified network no Internet. My friend came over and tried it on his laptop and it worked for his Windows 8.1 . I have a Comcast router/modem combo and have it hooked to a western digital router which is what the Ethernet cord is run from.
View 9 RepliesStrange issue that just started today. My Ethernet adapter shows unidentified network and none of my apps have internet access, however my web browsers work just fine. I am even making this post from the adapter that supposedly has no access. I have been searching around for a solution, but no problem seems similar to mine. Check out the screenshot below.
View 1 RepliesBut I'm currently browsing the internet and typing to you.
In fact - I can do virtually everything (League; Steam; Skype; etc) except use any OS feature that requires logging in -
e.g. Mail, User Accounts, Shop, etc. Then it says something along the lines of "Cannot use this service without an internet connection - please connect and try again." When I run Network Diagnostics as the prompt recommends - it says I am connected and cannot find a problem.
It doesn't always happen - but it seems to be determined on start-up. If I restart it now it might be working next launch - but 75% of the time it will encounter the same issue. It's been happening for months now but I've sort of gotten used to using my phone to check my emails - but I've now encountered an issue with one of my hard drives being unable to be searched (tried indexing, etc) and the only step I've found that I haven't tried says it could be a corrupted user account - but I cannot update my user account without "connecting to the internet". -_-
The system is up to date. No driver updates available.
I'm troubleshooting a PC that was recently upgraded a few weeks ago from windows 7 to windows 10.Up until today, there were no major issues. However, suddenly the computer stopped connecting to the internet. It's not picking up any wireless signals and even with an network cable plugged in, it doesn't connect to the internet. The network adapter picks up as working when I check everything in the device manager, and when I look up the network printers, I am able to see them. But when I try to setup a new network connection, I get a message saying "no network hardware detected". And when I try to print random documents, I am not detecting the printers.
View 1 RepliesToday, while having lunch at my favorite restaurant, I tried to connect to their WiFi network as I usually do. I got the following message:Checking network resources.And then, after a few seconds: Can't connect to this network. My obvious question is, why not? To begin with, was it something wrong with my computer, or something wrong with their network?
For example:
DHCP server did not respond
DHCP server did not issue an IP addressStored password incorrect; enter new password: _________
WiFi adapter card not respondingInsufficient virtual memory
But no, none of that useful information was offered. How am I supposed to fix the problem?
Ever since I got my computer (which came with Windows 10), I've had trouble connecting to the internet. Every time I shut down and start it up again, it's never online even though I'm using a cat 5 cable hooked directly to the source. My laptop can connect wirelessly, so that's how I know my internet is fine, but it's a Mac (which I'm currently using) so it's a completely different OS.
Usually if I went into the command prompt and did ipconfig /release then /renew, it fixes it, and I'm online. But ever since doing a recent Windows Update that trick doesn't seem to be working anymore. I.E. ipv4 and ipv6 are enabled, tried turning off Firewall temporarily to see if that was the issue, tried uninstalling antivirus software.
I upgraded to Windows 10 two months ago. Last week, I lost networking. I've scanned the posts and haven't found a solution.
Network troubleshooter says adapter might be the problem, device manager shows adapter working normally. Power saving not enabled. No VPN installed. Original adapter is Broadcomn NetLink Gigabit Ethernet.
Too late to roll back to Windows 7.
Installed new Realtek PCIe GBE Ethernet adapter that is Windows 10 compatible. Tried an old USB Netgear wireless approach.
Cannot connect desktop to network at all. All other tablets, laptops work fine.
Tried all suggested command prompts (netsh, etc).
Tried updating drivers by downloading to tablet and then transferring to computer.
I started my PC in a new premises with a Wireless modem, I have two other PC's connected.
When I started the PC it saw the wireless network and the option came up to connect and there was a tick in the "Connect Automatically" box.
I selected OK but got a message "unable to connect".
I did not get the opportunity to enter the Password/Key.
Now the PC will not connect to the Network nor will and Diagnose and repair fix anything.
BTW the Ethernet adaptor has been disabled.
The laptop I am sending this from is next to the PC so the wireless signal is okay.
I have a Windows 10 Pro 64bit box as my NAS
Storage Spaces, ReFS, 2 drives mirrored
HomeGroup
HDD sleep on idle
Hibernate/Sleep disabled
My problem is when I typically save or open a file with the Windows file dialog on any Windows 10 machine, and I try to go to that machine through the network path //MyNAS/MyFiles, it initially gives me a cannot connect or find error.Is this due to the dialog not waking up the drives on the NAS? Something is obviously asleep here, and I usually end up opening Total Commander or Windows Explorer to "wake up" the connection and then everything works. I don't mind waiting, but I'd like the dialogs to hold tight until it connects, not give me not found or cannot connect.
it was working back on 10049 and then i updated to 10051 and it still was working fine. but recently i did a fresh install and now i can re add a network device
i have a "New" Nintendo 3ds and i cant setup the MicroSD management which requires you to add it as a network drive
like N3DS
in the network tab i can see it but when i click it it says
windows cannot access N3DS
error code 0x80070035
the network path was not found
upon clicking troubleshooting the problem says
the remote device or resource wont accept the connection..
There seem to be a lot of these problems and they are posted all over.
Firstly most of my programs that were carried over from my windows 10 upgrade seem to have some form of internet connectivity problems, my browsers work completely fine, with the exception of internet explorer, which I think is the reason for the connectivity problems, it also seems that I cannot install java, that was a possible solution that came up in a different forum. error says: cannot install java with current internet settings. The other programs that have connectivity problems are steam, bluestacks and Microsoft office 365, and that it cannot verify my licence I am currently reinstalling it to see if this solves it. will post it here if it has been solved. I use to have comodo antivrus before upgrading to windows 10, I am unsure if there are any remnants of it hiding that is causing these problems.
I have just bought an HP laptop running windows 10. I cannot connect to internet wirelessly as when I select my network connection it requests username and password. (Screen shot attached)I only have a network password for my connection and have never had or been requested for a username.
We have a couple of laptops at home and they connect with password only no problem. It is only this laptop that requests both. I can find no way past it and cannot connect. It connects via cable fine but thats obviously not ideal for portable laptop.
How do I connect to a shared network drive I have setup on my Windows 2012 R2 standard server at home, from my Windows 10 pro laptop is at work?
Do I have to setup a vpn on windows 2012 server and connect to it from my laptop?
I have 2 new PC's set up and running, connected to a NAS via a Switch. Internet is available via a router.
I need to be able to access folders on and from both machines. I have shared C: on both, given permissions on both (everyone = Full control)
I can see the relevant machines in the network section of Windows Explorer (master & backoffice). Sometimes I can see C: on the other machine but I can not connect to it. If I Double click I get "path not found" error ( 80070035 I think )..... masterc
If I type in using the IPaddress it connects and works fine.... 192.168.1.69c
It seems that once I've used the IPaddress method, it can sometimes use the name method ( But this is hit and miss )
I have just bought a new windows 10 machine. It finds my home WIFI but fails to connect with the message "Can't connect to this network".
I have tried all the obvious issues such as re-booting (every component). I have several windows 7 machines and have checked the configuration of the wireless adaptors and there is nothing different around security, or 802 protocol selected etc. I have tuned off IP version 6 after reading some forums but get the same error.
My router is provided is provided by SKY is:
Manufacturer Sagemcom
Model Number F@ST2304
Firmware Version 7.16a4N
ADSL Firmware Version A2pD038m.d24h
Whenever I try to connect I get the following router system log:
Nov 7 15:09:11 (none) user.alert kernel: Intrusion -> IN=pppoa0 OUT= MAC= SRC=136.159.181.168 DST=2.125.174.9 LEN=60 TOS=0x00 PREC=0x00 TTL=50 ID=40139 DF PROTO=TCP SPT=45482 DPT=23 WINDOW=5840 RES=0x00 SYN URGP=0 MARK=0x8000000
My first experience with Windows 10 has been extremely frustrating and wasted a lot of time. I see that this is also a very common problem. Equally frustrating is the lack of diagnostic from Windows...I appear to have no way of knowing why the connection failed (hence why I have shown the router log).
you could connect to an hidden wifi network? or it's just my laptop?
View 9 RepliesI'm running WiFi on my desktop since a couple of months but tonight(since 2 days ago) I suddenly "can't connect to this network". I live in an apartment building for students and we share a Wi-Fi connection in the house. I've asked my neighbor and her connection works.
My smartphone can connect to the network as usual, my chromecast can connect but not my PC.
I run win 10 and use an ASUS PCE-AC68 network card.
ATM I'm connected to my smartphone hotspot so it seems like there's nothing physically wrong with my equipment.
Smartphone connected to the wifi network
Full signal can't connect!?
Desktop can't connect
I think I've tried all the obvious stuff. Checking for new drivers for my ASUS card, firewall is completely off, telling Win 10 to forget the connection and rebooting, waiting... I just get that annoying message "can't connect to this network" "close"...
Here is a wireless network report(netsh wlan show wlanreport) ....
I recently upgraded one of my laptops from Win7 Pro to Win10 Pro. Ever since then it has been taking a much longer time for the laptop to connect to either of my home networks (two different homes). This is with either WiFi or Ethernet.
When it was running Win7 it would connect to either home's network in a few seconds. Now it usually takes over a minute, as much as two minutes. Once it does connect everything works fine.
Running Windows 10 on an HP Multimedia Laptop.I am on vacation in Mexico, Outlook and Edge/Firefox timeout (Laptop) when I try to search/update. HOWEVER my Kaspersky virus dB update can access the Internet (on laptop) with no issues when I run it. I had no problems at home, the only difference is I am trying to connect at the hotel in Mexico. I have tried connecting with both wireless and lan, changed both to trusted networks and rebooted. Same problem, shows a connection but Outlook and Browser timeout. Troubleshooter does not find anything wrong.
The network is fine, I am using my Android tablet and cell phone connected to the network to send this question. Is this some location/security setting in Windows 10?
I recently upgraded to windows 10. i started having a series of problems but they eventually fanned out but I still am unable to connect to the internet via wifi. I have to use the ethernet cable.
View 2 Replies