Networking :: Why Specified Network Password Is Not Correct
Aug 10, 2015
Why the specified network password is not correct? My password is CORRECT!! It's a good password and the only password used on these computers. When I try to network from my win 10 laptop to win 10 desktop I get this error message? I went to Control Panel Networking and troubleshooted and it said I didn't have permission to network. Yet I had no trouble when I was working the same computers in win 8.1 and win 7. There has been no change in networking procedure in win 10 which worked well in win 7 and 8.1.
View 3 Replies
Similar Messages:
Nov 8, 2015
My desktop and laptop are both running Windows 10, and I sign into both computers using my e-mail address and password from Office 365. On each computer I have enabled sharing for each drive with the permissions I want. I am not using the HomeGroup feature because I want to share entire drives, and support for HomeGroup says it shares a very limited set of folders.
When I try to access either computer from the other, it asks for my credentials and I give the same e-mail and password I use to sign in. The response from Windows is "The specified network password is not correct."
I have seen a number of posts about this message, but no solutions that worked for me. Many solutions involve entering the computer name as the domain, which I don't think is applicable, since I am signing in with my Microsoft e-mail. I tried entering the computer name anyway, and it did not work. I have also tried updating my credentials with the Credential Manager, and (when that did not work) deleting the credentials and re-entering them when asked, still to no avail.
View 8 Replies
Dec 28, 2015
One of scores and scores of people having home network connection issues...when prompted for the password, etc, when trying to access a network share (another desktop in the house)... What is the attached jpg network password asking for ?
Right now only a 2 PC network (not Homegroup) Sharing is enabled and in Private mode all network settings have been checked and double checked
Is it the password for the current system...ie this PC's password when trying to connect to Network share ?
Is it the particular user that's logged on password ?
Is it the password for the network share I'm trying to reach ?
Is it separate or different from the Windows On-line account password ?
Same for user...is it the current users name...is it the current PC's name....or is it the name the MS account is using
View 9 Replies
Mar 5, 2016
I have just set up the "o2 HomeBox 6641".
How can one change the name of the network connection:
"WiFi" can be changed / renamed, but "o2-WLAN" cannot, I would like to rename it.
How / where can I change the WPA2 key, the password for the Internet connection?
And, do I need a password - there is no one else using the Notebook - to enter the program / GUI in the browser to change settings for the router?
View 9 Replies
Jan 9, 2016
Using Windows 10 I have tried several times, but I'm unable to recover my network or shared drives passwords. How can I delete the need for the password, or how can I recover or reset the password?
View 1 Replies
Mar 5, 2016
My wife doesn't use a password to log on to her Windows 10 PC. Her user name is her email address when the "Enter Network Credentials" window pops up when access is attempted from other computers. Her email password does not work here. We don't know what password it might be expecting. We've run NETPLWIZ on her machine and cleared the "users must enter a user name and password" box. This has no effect.
View 2 Replies
Apr 14, 2016
Husband updated his laptop to Windows 10 several months ago. So far it's been good, and he likes it...that is until this morning. He opens the laptop...no internet connection. It shows our wifi network, but won't connect. He enters his password...says he needs to enter password for that device. Enter password from before Windows 10...no good. Enter password for micorstoft...no good.
Using my laptop (Windows 7) to find fix. I've tried: Troublshoot network connection by right clicking. Right Click won't work...nothing happens. Maybe keyboard language is wrong...no settings button available to look at keyboard properties. Try connecting directly to router...won't make connection. We've rebooted the computer a couple of times, to no avail.
Our phones are connected, my laptop is connected, our chromecast is connected, so we know it's not the router. There is something up with his laptop.
Playing ring around the rosey is not the best way to spend a Sunday morning. no internet connection = no ability to enter password = not able to troubleshoot internet connection = no internet connection = no ability to enter password.
View 2 Replies
Nov 6, 2015
I have a Windows 10 PC, with one of it's functions being that of a file server/NAS for my home network. I set it up with password protected sharing and a user account/password that everyone knows and uses to access it. I didn't really have any reason to use password protected sharing at the time, but it was the default so I left it.
Now I have a couple of network streaming devices that can't handle password protected sharing, so I was considering turning it off. Is there any reason not to turn off password protected sharing on a private network? Obviously I don't mind everyone on the network having access, but I was wondering if it had any other potential security benefits that I haven't thought of.
View 1 Replies
Oct 1, 2015
How do I find my network DVR in Network and sharing center?
View 4 Replies
Sep 5, 2015
Just upgraded to Win 10 and kept losing internet access. After troubleshooting my home network is now named "Network 2". How do I change the name to "Network 1 "?
View 3 Replies
Mar 17, 2016
I forgot the login password/credentials to another computer on my home network.
View 3 Replies
Jan 3, 2016
I had to do a complete reinstall of Windows 10. However, the new install still recognizes the old homegroup and I didn't write down the password. Now I can't change the password. When I open up the homegroup window, I can join, change sharing settings, but I can't change the password. I have administrator rights for the pc.
View 5 Replies
Aug 23, 2015
Every time I restart my Windows 10 Pro 64 bit, I have to enter the password for my WIFI network. I cannot find anyplace to save the password. The network is set to connect automatically.
View 9 Replies
Nov 13, 2015
I updated my laptop from 8.1 when I got it last month. Generally when it's on my desk, I use an ethernet cable, however if I try to connect to our wifi it won't work.
The wifi network shows up and with a strong connection, but when I put the password in it says it's wrong. All other devices in the house that use wifi connect with no problem, I've even forgotten the network and reconnected with my phone just fine and my laptop connects to other wireless networks fine as well, it just seems to have an issue with my home wifi.
View 2 Replies
Feb 10, 2016
having trouble recovering my password for a Homegroup, Windows 10. I know, know - I don't know why I don't have it written down along with my other bazillion passwords..I'm on the computer I used to set up the Homegroup, which I vaguely recall setting up a year or two ago when we first got this desktop. I'd like for other computers to access files on this desktop, I assume via the Homegroup. but I can't recall the password to connect to this desktop via Homegroup.
I've read that if I'm logged into the account on the computer used to create the homegroup, I should be able to go through control panel/ Home group/show or print password - but I don't see that option.
When I go to CP/Homegroup... it says "bsn on NISNESTPC has created a Homegroup on the network" - and only gives me two buttons to "join now" or "close". If I attempt to "join now" - I get as far as needing to enter the password, of which I can't remember. There are also 2 links for "change advanced sharing settings..." and "start the homegroup troubleshooter". how can I recover my forgotten HomeGroup password in Windows 10??
View 5 Replies
Aug 8, 2015
Why when I upgraded my laptop to windows 10,it does not save password to connect to the internet?It has connect automatically and place to put password in,but if I restart laptop I have to still add password every time.In windows 7 it saved it and I would just hit connect.How can I fix this?Also I`m running windows 10 pro and in user accounts,it doesn`t have manage your network passwords,in the left panel like I googled and says it`s suppose to have.
View 9 Replies
Feb 10, 2016
As stated in the subject line I can't connect my Windows 7 Pro system to a Windows 10 Home system via the network without a password being required. Strangely, I can connect from the Windows 7 Pro system to two other Windows 7 Home Premium systems on the same network without a password being required.
Also, all these systems (including the Windows 10 Home system) can connect to the Windows 7 Pro system without any password being required. How I can eliminate the requirement for a password to access the Windows 10 Home system from the Windows 7 Pro system? The Windows 10 Home system version number is 1511, build 10586.0.
View 7 Replies
Dec 4, 2015
Today, while having lunch at my favorite restaurant, I tried to connect to their WiFi network as I usually do. I got the following message:Checking network resources.And then, after a few seconds: Can't connect to this network. My obvious question is, why not? To begin with, was it something wrong with my computer, or something wrong with their network?
For example:
DHCP server did not respond
DHCP server did not issue an IP addressStored password incorrect; enter new password: _________
WiFi adapter card not respondingInsufficient virtual memory
But no, none of that useful information was offered. How am I supposed to fix the problem?
View 2 Replies
Mar 5, 2016
I have a desktop PC running Win7 64Bit Ent. It's not actually in use, so nothing is connected. I also have a laptop running Win10 64Bit which I'm using to type this post. I have some audio files on my desktop that I'd like to pull off of there, and put them on my laptop, and then maybe on a cloud. My 1st question: Is it possible to simply use a USB cable between 2 USB 3 ports if I simply power up the desktop with the USB cable connected? Does the USB protocol provide for me to see those HDD's on the desktop via the laptop? I'm quite limited for physical space, and I don't need the desktop to be running permanently, I just need to get these files off of it. If that's NOT a solution, what is the next easiest method?
View 6 Replies
Dec 16, 2015
I have forgotten my network security key, all of the info I find points me to connections, wireless properties, etc..... This does not match my updated Windows 10. What is the procedures for the latest updated Windows 10?
View 1 Replies
Jan 4, 2016
I have two Win 7 computers on my wired network and 6 Win XP computers on this same network. This main computer was Win 7 and just upgraded to Win 10 in November. For a year this network has worked just fine, plug and play basically when I set it up, now after Christmas shutdown (2 weeks), I can't see any of the computers on this network. The only thing I can see is the media drive on a computer called 6Head2. All I really do is transfer files from this main computer out to those 8 other computers.
What is wrong with my computer? Network discover, file sharing all checked, network location was changed from Public to Private today by me. But it did work last year, even with the network location being public.
View 2 Replies
Jan 10, 2016
I have a home network that includes-Two Windows 7 PCsTwo Linux machinesA Brother MFC7820N networked multifunction printer..All the above are on wired connections. Then there's an 802.11n wireless link for laptops and media devices.I'm just setting up a new machine that's running Windows 10 Home, using the wireless network. I was annoyed to find that Brother don't have a full-function Windows 10 driver for the 7820N that supports scanning, but the Brother site says the built-in drivers in Win 10 should work for basic printing.
Problem: I successfully added the printer device to Windows 10 (at the 3rd attempt) using the "manual advanced" method. The printer has an entry in the hosts file, and was added by host name.The printer fails to print, with a "not responding" type message. The driver also can't pick up the status info from the printer.
What's really weird is-I can ping the printer from the W10 box (and the other machines) by either IP address or hostname.However, this printer has a web interface. I can access this from any of the Windows 7 machines, but the Windows 10 machine says "web site failed to respond" or somesuch. This happens with any of: Edge, IE11, or Chrome browsers.I can't even make a manual connection (telnet to port 80) from the Win 10 machine (timeout).The Windows 10 machine CAN access all the other devices on the home network, including the web servers (Apache) on both the Linux boxes.
This looks like the web access to that particular address is being blocked somehow. I have tried disabling my AntiVirus package (Kaspersky), but that makes no difference. Is Win10 perhaps detecting an "old" web server on the printer and refusing to talk to it? (and why would that prevent printing using lpd?)
View 9 Replies
Nov 8, 2015
Nothing is working to get my computer to connect to the internet again. It was working fine yesterday so don't know what was changed. All other devices can connect. Using my laptop to search.
IPv4 is connected but I can't get IPv6 to connect at all. No error messages anywhere.
Fixed. Updated drivers worked. Just had to restart a couple times for it to work.
View 9 Replies
Feb 10, 2016
I have a USB connected printer (HP F4100) on my Windows 10 desktop. Everything appear to be working as I have no issue accessing the printer remotely on my Windows 7 laptop. The issue is trying to access from my Windows 10 laptop. I can see the shared workgroup in explorer, but no sign of the shared printer.
How to troubleshoot this? I've gone through the basics such as disabling Windows Firewall, but no luck. Everything looks fine in the advanced sharing settings and as mentioned, things are fine from my Windows 7 machine.
My impression of Windows 10 is not great so far. This along with my machine rebooting due to a security patch even though I had "Notify to schedule restart" selected. The whole mandatory security updates kind of irks me. I kind of get it, but as a power user, I should have the choice. Especially with the amount of sketchy patches that MS has released over the years.
View 3 Replies
Mar 5, 2016
I have Windows 10 laptop hooked up to an ethernet connection which has been working well for the past 6 months. On 2/18/16 it stopped working. I traced the problem to the Qualcomm Atheros network Controller/ Killer E2200 Gigabit Ethernet Controller: Internet status > IPv4 Connectivity: No network connection IPv6 Connectivity: No network connection Clicked: diagnose --> System checked & reset, with IPv4 Connectivity and internet access restored.
This resolved the problem until 3/4, following a Windows 10 update. The above solution no longer works. Clicking 'Disable this net work device' and then enabling it again restores IPv4 Connectivity and internet access for a limited time but loading a new site or page is slower than it was prior to the emergence of this problem on 2/18, and then the connection is again lost after maybe 10 to 20 minutes.
View 1 Replies
Feb 10, 2016
I suffer total loss of network connectivity after a computer crash. I am on win 10 x64
Here is my ipconfig /all:
C:WINDOWSsystem32>ipconfig /all
Windows IP Configuration
Host Name . . . . . . . . . . . . : Xello
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
[Code] .....
Windows troubleshooter reports that "One or more network protocols are missing on this computer".
Some other info: I am unable to connect to 192.168.0.1, which is my router's home page. I can load this page on my laptop if i connect my laptop with ethernet, so the router is fine.
View 9 Replies
