Networking :: WiFi Card Not Working
Nov 19, 2015
I have a HP pav 500 something or other and it cannot keep a stable connections ( for more than 2 seconds) to my wifi. The wifi card is a Qualcomm Atheros AR9485 802.11b|g|n WiFi Adapter and always worked well before i installed Win 10.I got fed up tryin to fix driver issues so i bought a usb wifi card. It is ment to relay 150mbps but mannages 1-2 Mbps. i have speed tested my phone on wifi in the same location as my HP pc and my phone recieves 35Mbps.i have tried updating the drivers but all seem up to date.
View 2 Replies
Similar Messages:
Nov 24, 2015
I have just replaced my WiFi card from (BCM943228HMB) to BCM94352HMB. Before replacing my WiFi card i done the following:
Made computer boot in safe mode with networking.
After that i replaced the card, then booted into windows 10 (safe mode with networking) and checked device manager. Everything was OK (See attached picture). I then tried to turn on WiFi, but it does not turn on.
View 9 Replies
Oct 18, 2015
When I boot up I cannot get connected to my WiFi. The only way to get it to work is to shutdown and boot up again, then all is well.
I never had this problem until Win 10 upgrade.
View 3 Replies
Aug 20, 2015
When I first installed Win 10 it was working great got my wifi connection working and everything now it seems I cannot get connected. I have tried several times, putting it mildly. I put in the Modem/router address and password and then I go to the site that shows you the wifi connections and mine is not there. But there are about 10 or 12 that are there. I have tried this several times like I said. And I have rebooted to see if that did anything and it made no diff.
It seems from some of the reading I have done this might be a problem caused by an update. It worked great for several days. And while I am thinking of it can you delete all those other wi fi addresses some how.
View 19 Replies
Feb 2, 2016
Product Name: Hp Omen 15
Operating System: Microsoft Windows 10 (64-bit)
Wifi card: Intel Wireless-N 7260
since some days my wifi has stopped working.If I click on Wifi icon it shows only ONE (max two) NETWORK:And I live in a building with 20+ networks, as you can see from WiFi Analyzer (I'm the red one on the right).If I deactive/reactive Wifi with fn+f12, it goes to Airplane mode and to Wifi mode again and it eventually shows all the networks/My Wifi is on the top. If it's saved, Windows connects to it and then it drops the connection; if it's not saved and I try to connect, it says "You're not able to connect to this network".The fun fact is that after some seconds every network disappear and only one is showed (probably the neighbour one..I dunno).
I've already tried to HARD-RESET the notebook keeping the power button for 10/15sec with the laptop turned off.I've already tried to follow these instructions [URL] ... updating drivers (Intel 18.12.0.3, 18.12.1.2, 18.30.0.9 [Windows 10 default], 18.32.0 [Lastest drivers]) with no success. Everytime I install a new drivers, I uninstalled the previous one + Wireless software + reboot.
I tried to uncheked "Allow this computer to turn off this device to save power" on my Wifi hardware settings without success.The HP Network support says I didn't choose a Wifi (Really? The problem is I don't see my Wifi on the list!).This is not related to a new Windows 10 upgrade since I've installed it months ago and It's the first time I've this problem :/ It always worked
I tried different settings too/I changed channel, I set 802.11g on my router, APSD off on the router.I set "Magic packet off, ad hoc QoS off, U-APSD off, fat channel off,incremental throughput off, HT mode off" on the card setting without success. Nothing chaned.The Hardware test doesn't detect any failure. If I go close to the router, it shows my network with full power connection and it connects to it. Then I go back to my bedroom (probably 3/4 meters far), it KEEPS the connection for 30/40min and It drops the connection and I can't reconnect to it anymore. It always worked perfectly in my room in these months (I bought it in March 2015), so the distance is not a problem, I'm 6/7m far from the router.In this case It shows my Network (Connected) and the neighbour network...and the other 20+ networks???
The only way I have is USB tethering with my Nexus 5.I tried the Wifi connection on Elementary Freya (Ubuntu linux based OS) and it shows 20+ networks available on the list. It has not connection problem with my Wifi, but sometimes it stops working, the webpages stop loading and I must reboot Wifi to reconnect to it (usually after 30/40min using it).What's the problem? Is my Wifi card broken?
View 1 Replies
Nov 7, 2015
I have been using this version of windows 10 from last 1 month. I installed all the drivers and everything was working just fine. From last few days my wifi driver isn't responding. I tried reinstalling the driver but the problem still exists.
I can connect through the Ethernet cable and the Bluetooth driver is also working. Only the wifi driver has stopped.
My laptop is Dell inspiron 5520
View 9 Replies
Mar 20, 2016
I just installed the TP Link T6e 1300 WiFi adapter card and everything was ok until I noticed that all my applications are launching in 32-bit instead of 64-bit. Some programs won't open, but are "running" according to task manager in 32-bit. Is there anyway I can troubleshoot this?
OS:
WIndows 10
Expansion Card:
TP Link T6e 1300
MB:
ASUS P8 z77-v lk
View 1 Replies
Nov 2, 2015
I have my laptop at work and have had no trouble connecting the company WiFi (they have Guest WiFi and a WiFi where you need to enter your company provided Username and Password). I have been connecting using my Username and password. Today I had to change my company login password. Now when I try to connect my laptop I get a "can't connect" message because the password saved in my laptop is no longer valid. But I can't find a place in Win10 to enter my new password.
I remember the first time I logged onto the company WiFi a Windows popup came up asking for my Username and Password (which was saved so I didn't need to enter it again - until now). This time not getting the popup - it just says "can't connect".
View 7 Replies
Jan 9, 2016
Running Windows 10 on a Dell Latitutde I was trying to setup a Netgear Wifi Extender because the Fios Router does not reach all the way to the other side of the house. I did the setup (so I thought) the way the manual told me and my computer was trying to connect to the extender, but it just stayed in "Connecting..." For a long long time. Eventually I gave up and thought I'd hit the reset button on the extender and try again.
Now my wifi adapter finds NO networks. All my other devices see all the networks.
The only other time this has ever happened I had accidentally hit the network adapter switch on the side of the PC, so I'm 100% sure that's not the problem and that it is 'on' in the settings. I've tried restarting the pc several times as well as toggling the adapter on/off, airplane mode on/off, and the switch on the PC on/off.. And it still sees no networks..
View 1 Replies
Jan 5, 2016
My memory card is not being imported onto computer. I never had this problem before until I upgraded to Windows 10. I have to say overall I am very dissatisfied with this new version. Not the only issue, but this is important to me. My camera is a Canon 350HS Power Shot. I was able to upload prior to upgrading.
View 1 Replies
Oct 23, 2015
I have an nvidia 860m graphics card (Lenovo Y50 Laptop with an i5 processor) and I cannot launch any games with it. I've uninstalled and re downloaded everything from the drivers to the games. My final conclusion is that something is wrong when my computer tries to use my graphics card, but I don't know how to fix it.
For when I launch Witcher 2, it says "Direct3D 9 device initialization error".For when I launch The Legend of Korra (game) it says "Error : Graphic::Startup() FAILED. No Graphic Memory".I looked at other threads, but I don't know how to reset a graphic card's BIOS.
View 1 Replies
Aug 3, 2015
I recently upgraded my laptop to Windows 10 from Windows 8.1. After that, my Realtek PCIe GBE Family Controller (ethernet) randomly stops working. After a reboot or "fixing" the problem, the card works for anywhere from 1 minute to 4 hours, then fails again.
Sometimes "failing" means that in control panel it shows that it is still connected, but doesn't actually work, [URL]
or other times it just shows that it is unplugged, when that is certainly not the case [URL]
Troubleshooting the problem with Windows troubleshooter yields three errors, seemingly random when they each appear.
The three errors are "The Default Gateway is not Available", this error [URL], and then finally a DNS error that shows up on Chrome and the Windows troubleshooter [URL]. The way the internet stops working is Chrome will stop loading web pages and give me a DNS error, shown in the most recent gyazo.
So far I have tried rebooting numerous times, (which USUALLY fixes it for a few minutes), troubleshooting with Windows troubleshooter, and changing the DNS servers to Google's (which I have now changed back to the automatic setting since my ISP, Time Warner Cable, isn't too happy about working on an external DNS server. I have also tried eight different ethernet cables, over two different networks and routers. All of this has begun after I upgraded to Windows 10.
I have tried three different drivers for the ethernet card; one from Realtek's website, one from my laptop manufacturer's website (Sager), and lastly Window's generic one, none of which have worked for me. It could be a coincidence, but it seems that if I have constant load on my ethernet card, it lasts for much longer without failing.
View 1 Replies
Aug 24, 2015
I have installed Windows10 on a Gateway FX530 desktop PC. All has gone well with one exception. The OS seems to recognize that there is a card reader attached, I can see them through Device manager. When I insert a SD card the system completely ignores the device and will not allow me to access it. I have tried to change the drivers, without success. This card reader worked just fine with Windows 7 Pro and there was no indication that they would not work with Windows 10 when I ran the upgrade test.
View 2 Replies
Oct 20, 2015
I have tried inserting my card into slot, I get message, connect a device and try again.it wont read the card.
View 1 Replies
Nov 24, 2015
I have internet service from AT&T which worked great until I updated to windows 10. My pc now connects to the wifi just find, I can download updates, but I can not browse a web page. When I go into open a web page I get an error that the page can not be displayed. If I vpn to my work it works just fine then. I have reset the browser settings, created a new account on my pc and nothing has worked.
View 6 Replies
Nov 27, 2015
I have no wifi after upgrading to Windows 10 from Windows 7. Looking at Device Manager, I believe my Network Adapter is Intel(R) 82578DC Gigabit Network Connection. Looking online, I do not find a driver for Windows 10.
View 4 Replies
Jan 24, 2016
All of a sudden I get "your device does not support Miracast" and wifi is gone !
I don't want Miracast.
Acer Laptop;was win 7 on it had upgraded to W 10 Pro and was using wifi until now ?
View 2 Replies
Oct 31, 2015
i have tried connecting to my school's apartment however it always goes to no connections are available and then airplane mode and shows connections are available. the Wi-Fi connects just fine in all other areas of the school byt not in my apartment. The apartment is located inside the school and there are a couple of access points. I can connect to my friends Wii-U just fine but not my laptop? And when I troubleshoot, it says "Problem with router or access point.
View 1 Replies
Aug 21, 2015
I've installed windows 10, but I've got a strange problem. My WiFi connection randomly gets limited for one second. It isn't so bad, when I'm browsing, but if I wanna download something... that's terrible :S 'cause when the wifi stops, the download stops too... What can I do? I think it's not my laptops problem, because before win10 - on windows 8.1 - it worked fine. If it matters something, it gets limited in about every 5 or 10 minutes.
View 9 Replies
Aug 23, 2015
I was wondering if it's possible to utilize both WiFi and ethernet in tandem. I'm pretty sure some of you are going to tell me that I can only access the internet through one of these, up to my bandwidth limit, but that's not what I mean.
I'd like to access the internet through my WiFi connection, yet have a wired connection through my router to access the files on the other computers in my house.
View 1 Replies
Feb 17, 2016
I have a brand new MSI QE62 apache pro, and I just installed an update to windows 10 (the computer came with win 10, so i cant revert back to 7 or 8) and after the update, I no longer have a visible wifi adapter in my network settings, and i obviously cant connect to wifi as a result.
View 2 Replies
Apr 14, 2016
Title says it all.
View 5 Replies
Nov 4, 2015
My PC would be connected to WiFi, but I wouldn't be able to go on any site. I restarted my PC and the damn thing locked up on the HP logo screen! So I had to hold the power button to turn of my laptop.
View 1 Replies
Sep 12, 2015
I don't really know how to say this but my wifi wont turn on, when I diagnose the driver it says I need to turn the wifi button thing on but this laptop doesn't have one so how do I enable wifi without the button
View 9 Replies
Feb 10, 2016
I upgraded my friends HP laptop to Windows 10. The issue now is I can't enable Wifi. The card is recognized correctly in Device manager and no issues is found with it. It looks like it is fine. However in the Network Settings WLAN is set to "Off" and when I try to turn it on it always jumps right back to off. eg. I can't enable it.
HP clearly state any laptop bought prior to specific date in 2013 will not get any driver updates from their side for windows 10. And updating through device manager only tells me it's the newest driver available.
The Wifi card i Broadcom 4313GN card. I searched for win 10 drivers but did not find anything.They only offer linux drivers on their homepage...
So any solution to the issue or link to a win 1' driver for this wifi card?
View 2 Replies
Feb 23, 2016
Sometimes when I'm gaming online my connection gets lost and my wifi gives me no internet signal but there is internet on my other devices, I solve it by clicking on airplane mode twice (on and off again ) then the Internet comes back . Is there a permanent solution to this ?
View 1 Replies
