The computer is at my dad's so I am relaying what he told me. It is a new Cell laptop, a quad i7 CPU with 10 Home ed.
He has a problem: everything that uses WIFI, that is Explorer, Skype, Firefox has long freezes. The connect is practically intermittent. None of his other devices (another Dell quad i5 laptop, an old Core duo Dell laptop not his Galaxy tablet, or his internet TV) have the problem. It is one network which is from his cable company wifi router.
i have tried connecting to my school's apartment however it always goes to no connections are available and then airplane mode and shows connections are available. the Wi-Fi connects just fine in all other areas of the school byt not in my apartment. The apartment is located inside the school and there are a couple of access points. I can connect to my friends Wii-U just fine but not my laptop? And when I troubleshoot, it says "Problem with router or access point.
I purchased a new computer running Windows 10 (build 10240) today and have set up the windows. However, it will not allow me to connect to my WiFi. When I use the network option in the task bar, no wifi networks are shown and it says that there are no connections available. When I access the network settings, where the different sections are listed on the left-hand side, WiFi is not an available option.
Updating drivers Deleting drivers and then allowing the computer to reinstall A few different command prompt methods such as resetting the TCP stack, as well as trying some that were for people who upgraded from windows 7/8.
I have a PC out in my building and it runs off wifi, sometimes my modem shuts down and reboots but it will take like 5-10 minutes unless I go all the way back to the house and power cycle it. The problem is my windows 10 is set to auto connect to it but never does unless I click the wifi drop down list then it will reconnect, any application that tries to reconnect to a specific wifi more aggressively than windows 10 it gets annoying because if I need to use the pc I cant just look across the room to see if my modem is back.
Changed my wifi name and password. After that I`m unable to type the password. After clicking connect it loads for a while showing "checking network requirements" and it ends with "cant connect to this network". Password box does not even show up!
Brought a new Dell laptop and came with windows 10 and i can't get it to connect to wifi. It worked perfectly at my mums, but at home it says wifi password incorrect when its not. I have updated drivers, disabled and enabled the wireless adapter. In command prompt i type ipconfig/renew it says no operation can be performed.
I have an odd issue with my laptop since upgrading to Windows 10. The first time I boot I cannot connect to my home Wifi, however when I reboot I can. It is always the same every time I switch it on in that it will only connect on the second boot.
I recently upgraded to windows 10. i started having a series of problems but they eventually fanned out but I still am unable to connect to the internet via wifi. I have to use the ethernet cable.
My son disconnected the wifi on his laptop. I know it is in Parameters - Reseau et internet (network - internet) - Wifi but the button to activate won't move. Don't know what to do.
I have just bought a new windows 10 machine. It finds my home WIFI but fails to connect with the message "Can't connect to this network".
I have tried all the obvious issues such as re-booting (every component). I have several windows 7 machines and have checked the configuration of the wireless adaptors and there is nothing different around security, or 802 protocol selected etc. I have tuned off IP version 6 after reading some forums but get the same error.
My router is provided is provided by SKY is:
Manufacturer Sagemcom Model Number F@ST2304 Firmware Version 7.16a4N ADSL Firmware Version A2pD038m.d24h
Whenever I try to connect I get the following router system log:
My first experience with Windows 10 has been extremely frustrating and wasted a lot of time. I see that this is also a very common problem. Equally frustrating is the lack of diagnostic from Windows...I appear to have no way of knowing why the connection failed (hence why I have shown the router log).
Yesterday I relocated our Wireless Modem to a cooler room. We live in the Philippines so these devices can get quite warm...After relocating and hooking up all the wires, cables etc. My wife's computer a Dell, would not connect to the Wireless modem. I checked and replaced all wires with new ones, and rechecked the connections, everything was okay...I use a MAC which is still working fine, and connected right away, so I know the Signal is getting out. I did the "ping" command and it is not going thru. Tried everything I know, cannot get her wireless to work. I have a Red X on her adapter, in the Network Connections dialog box, "Not Connected"...Her system uses a Broadcom 802.11n adapter, which I replaced just recently...When I registered I added all the Dell system info, CPU info etc..
How to configure my Win10 to automatically connect to multiple wifi networks?
I have wifi at home so when I get to the office I have to configure the "manage wifi settings" on my laptop, click "forget" my home wifi, and manually enter the office wifi password. I repeat the same process when I get home from the office or use the wifi in my brother's house. I had this on my Windows 7 but can't figure out how to in Win10.
After updating from windows 7 to 10 I faced a problem, my laptop's wifi does not auto connect when i turn it on, instead i have to reset my wifi adapter to connect to my wifi, this was not an issue on windows 7. My drivers are all up to date i even tried to reinstall them but still no result. It feels annoying to reset my adapter all the time when i turn on my laptop
Product Name: Hp Omen 15 Operating System: Microsoft Windows 10 (64-bit) Wifi card: Intel Wireless-N 7260
since some days my wifi has stopped working.If I click on Wifi icon it shows only ONE (max two) NETWORK:And I live in a building with 20+ networks, as you can see from WiFi Analyzer (I'm the red one on the right).If I deactive/reactive Wifi with fn+f12, it goes to Airplane mode and to Wifi mode again and it eventually shows all the networks/My Wifi is on the top. If it's saved, Windows connects to it and then it drops the connection; if it's not saved and I try to connect, it says "You're not able to connect to this network".The fun fact is that after some seconds every network disappear and only one is showed (probably the neighbour one..I dunno).
I've already tried to HARD-RESET the notebook keeping the power button for 10/15sec with the laptop turned off.I've already tried to follow these instructions [URL] ... updating drivers (Intel 18.12.0.3, 18.12.1.2, 18.30.0.9 [Windows 10 default], 18.32.0 [Lastest drivers]) with no success. Everytime I install a new drivers, I uninstalled the previous one + Wireless software + reboot.
I tried to uncheked "Allow this computer to turn off this device to save power" on my Wifi hardware settings without success.The HP Network support says I didn't choose a Wifi (Really? The problem is I don't see my Wifi on the list!).This is not related to a new Windows 10 upgrade since I've installed it months ago and It's the first time I've this problem :/ It always worked
I tried different settings too/I changed channel, I set 802.11g on my router, APSD off on the router.I set "Magic packet off, ad hoc QoS off, U-APSD off, fat channel off,incremental throughput off, HT mode off" on the card setting without success. Nothing chaned.The Hardware test doesn't detect any failure. If I go close to the router, it shows my network with full power connection and it connects to it. Then I go back to my bedroom (probably 3/4 meters far), it KEEPS the connection for 30/40min and It drops the connection and I can't reconnect to it anymore. It always worked perfectly in my room in these months (I bought it in March 2015), so the distance is not a problem, I'm 6/7m far from the router.In this case It shows my Network (Connected) and the neighbour network...and the other 20+ networks???
The only way I have is USB tethering with my Nexus 5.I tried the Wifi connection on Elementary Freya (Ubuntu linux based OS) and it shows 20+ networks available on the list. It has not connection problem with my Wifi, but sometimes it stops working, the webpages stop loading and I must reboot Wifi to reconnect to it (usually after 30/40min using it).What's the problem? Is my Wifi card broken?
I have my laptop at work and have had no trouble connecting the company WiFi (they have Guest WiFi and a WiFi where you need to enter your company provided Username and Password). I have been connecting using my Username and password. Today I had to change my company login password. Now when I try to connect my laptop I get a "can't connect" message because the password saved in my laptop is no longer valid. But I can't find a place in Win10 to enter my new password.
I remember the first time I logged onto the company WiFi a Windows popup came up asking for my Username and Password (which was saved so I didn't need to enter it again - until now). This time not getting the popup - it just says "can't connect".
when i use my laptop at home, it can connect to my wifi without any problems.
when i get to work, it refuses to connect to our wifi network. i have the correct password and user name. the wifi is turned on. i restarted the computer and that didnt work. I've tried everything i can think of, including the trouble shoot guide.
Running Windows 10 on a Dell Latitutde I was trying to setup a Netgear Wifi Extender because the Fios Router does not reach all the way to the other side of the house. I did the setup (so I thought) the way the manual told me and my computer was trying to connect to the extender, but it just stayed in "Connecting..." For a long long time. Eventually I gave up and thought I'd hit the reset button on the extender and try again.
Now my wifi adapter finds NO networks. All my other devices see all the networks.
The only other time this has ever happened I had accidentally hit the network adapter switch on the side of the PC, so I'm 100% sure that's not the problem and that it is 'on' in the settings. I've tried restarting the pc several times as well as toggling the adapter on/off, airplane mode on/off, and the switch on the PC on/off.. And it still sees no networks..
I have just replaced my WiFi card from (BCM943228HMB) to BCM94352HMB. Before replacing my WiFi card i done the following:
Made computer boot in safe mode with networking.
After that i replaced the card, then booted into windows 10 (safe mode with networking) and checked device manager. Everything was OK (See attached picture). I then tried to turn on WiFi, but it does not turn on.
I have a HP computer with built in WiFi access running Windows 10. All of a sudden, I have no option to connect to WiFi, but only have an option to connect with Ethernet. The WiFi options disappeared and I can't find a way to connect without using Ethernet.
Since I updated to windows 10 I cannot get my laptop to connect to the wireless network. The network shows up as available but when I hit connect it says "cannot connect to this network". When I run the troubleshooter it give me the error 'problems with wireless adapter or access point - not fixed'. I have restarted the computer and the router and made sure the drivers are up to date.
Tried to connect to Wifi today and couldn't find how. When I searched for online assistance I noticed that it directs you to the settings and then the network & Internet tab.Except I don't have that tab in settings. Mine is only Network.
I have wifi on 4 devices, I can be on the web and my laptop keeps dropping wifi I have to keep clicking on connect but sometime when I put my mouse over it it sometime connect.
windows 10 12gb mem 1 gb hard drive Hp laptop envy intel core i7 NVidia geforce
