Networking :: WiFi Network Does Not Getting Recognized
Nov 15, 2015
I just installed Windows 10 upgrade to my HP laptop over Win 7. Every thing is fine but some thing strange happened.
All other WiFi connections in and around my apartment can be seen by Windows 10, except my WiFi network !! I can see a lot of SSDs in my area but can't see mine!
I can access my WiFi network from my desktop and my phone, but not from my HP laptop. Device Manager shows that my network adapter is Intel Centrino. There is, however, an exclamation mark over "Unknown Device" which needs a driver that Win 10 could not provide.
View 2 Replies
Similar Messages:
Nov 7, 2015
I have just bought a new windows 10 machine. It finds my home WIFI but fails to connect with the message "Can't connect to this network".
I have tried all the obvious issues such as re-booting (every component). I have several windows 7 machines and have checked the configuration of the wireless adaptors and there is nothing different around security, or 802 protocol selected etc. I have tuned off IP version 6 after reading some forums but get the same error.
My router is provided is provided by SKY is:
Manufacturer Sagemcom
Model Number F@ST2304
Firmware Version 7.16a4N
ADSL Firmware Version A2pD038m.d24h
Whenever I try to connect I get the following router system log:
Nov 7 15:09:11 (none) user.alert kernel: Intrusion -> IN=pppoa0 OUT= MAC= SRC=136.159.181.168 DST=2.125.174.9 LEN=60 TOS=0x00 PREC=0x00 TTL=50 ID=40139 DF PROTO=TCP SPT=45482 DPT=23 WINDOW=5840 RES=0x00 SYN URGP=0 MARK=0x8000000
My first experience with Windows 10 has been extremely frustrating and wasted a lot of time. I see that this is also a very common problem. Equally frustrating is the lack of diagnostic from Windows...I appear to have no way of knowing why the connection failed (hence why I have shown the router log).
View 6 Replies
Aug 21, 2015
I have a network that has 3 laptops running Win 10. 2 of the computers (haven't checked the third yet) indicate they are on the same network SSID. One computer can print from the printers on the network.
The second laptop had the same printers and was able to print to them prior to Win 10. Now the SSID is the same as the first computer yet it can't print nor can it see any printers oe devices on the network!
View 4 Replies
Jul 3, 2015
you could connect to an hidden wifi network? or it's just my laptop?
View 9 Replies
Aug 8, 2015
I have a Compaq CQ61-410 Notebook. After upgrading to Windows 10 I no longer have WiFi capabilities. In Windows - Settings - Network & Internet I do not have a WiFi option listed. However, if I go to Control Panel - Network and Internet - Network Connections I see my wireless service listed. I have confirmed that I have the correct drivers loaded - Qualcomm Atheros. When I diagnose this connection I get the following message:
There might be a problem with the driver for the Wireless Network Connection adapterWindows couldn't automatically bind the IP protocol stack to the network adapter.
View 5 Replies
Feb 2, 2016
Product Name: Hp Omen 15
Operating System: Microsoft Windows 10 (64-bit)
Wifi card: Intel Wireless-N 7260
since some days my wifi has stopped working.If I click on Wifi icon it shows only ONE (max two) NETWORK:And I live in a building with 20+ networks, as you can see from WiFi Analyzer (I'm the red one on the right).If I deactive/reactive Wifi with fn+f12, it goes to Airplane mode and to Wifi mode again and it eventually shows all the networks/My Wifi is on the top. If it's saved, Windows connects to it and then it drops the connection; if it's not saved and I try to connect, it says "You're not able to connect to this network".The fun fact is that after some seconds every network disappear and only one is showed (probably the neighbour one..I dunno).
I've already tried to HARD-RESET the notebook keeping the power button for 10/15sec with the laptop turned off.I've already tried to follow these instructions [URL] ... updating drivers (Intel 18.12.0.3, 18.12.1.2, 18.30.0.9 [Windows 10 default], 18.32.0 [Lastest drivers]) with no success. Everytime I install a new drivers, I uninstalled the previous one + Wireless software + reboot.
I tried to uncheked "Allow this computer to turn off this device to save power" on my Wifi hardware settings without success.The HP Network support says I didn't choose a Wifi (Really? The problem is I don't see my Wifi on the list!).This is not related to a new Windows 10 upgrade since I've installed it months ago and It's the first time I've this problem :/ It always worked
I tried different settings too/I changed channel, I set 802.11g on my router, APSD off on the router.I set "Magic packet off, ad hoc QoS off, U-APSD off, fat channel off,incremental throughput off, HT mode off" on the card setting without success. Nothing chaned.The Hardware test doesn't detect any failure. If I go close to the router, it shows my network with full power connection and it connects to it. Then I go back to my bedroom (probably 3/4 meters far), it KEEPS the connection for 30/40min and It drops the connection and I can't reconnect to it anymore. It always worked perfectly in my room in these months (I bought it in March 2015), so the distance is not a problem, I'm 6/7m far from the router.In this case It shows my Network (Connected) and the neighbour network...and the other 20+ networks???
The only way I have is USB tethering with my Nexus 5.I tried the Wifi connection on Elementary Freya (Ubuntu linux based OS) and it shows 20+ networks available on the list. It has not connection problem with my Wifi, but sometimes it stops working, the webpages stop loading and I must reboot Wifi to reconnect to it (usually after 30/40min using it).What's the problem? Is my Wifi card broken?
View 1 Replies
Nov 2, 2015
I have my laptop at work and have had no trouble connecting the company WiFi (they have Guest WiFi and a WiFi where you need to enter your company provided Username and Password). I have been connecting using my Username and password. Today I had to change my company login password. Now when I try to connect my laptop I get a "can't connect" message because the password saved in my laptop is no longer valid. But I can't find a place in Win10 to enter my new password.
I remember the first time I logged onto the company WiFi a Windows popup came up asking for my Username and Password (which was saved so I didn't need to enter it again - until now). This time not getting the popup - it just says "can't connect".
View 7 Replies
Jan 9, 2016
Running Windows 10 on a Dell Latitutde I was trying to setup a Netgear Wifi Extender because the Fios Router does not reach all the way to the other side of the house. I did the setup (so I thought) the way the manual told me and my computer was trying to connect to the extender, but it just stayed in "Connecting..." For a long long time. Eventually I gave up and thought I'd hit the reset button on the extender and try again.
Now my wifi adapter finds NO networks. All my other devices see all the networks.
The only other time this has ever happened I had accidentally hit the network adapter switch on the side of the PC, so I'm 100% sure that's not the problem and that it is 'on' in the settings. I've tried restarting the pc several times as well as toggling the adapter on/off, airplane mode on/off, and the switch on the PC on/off.. And it still sees no networks..
View 1 Replies
Nov 24, 2015
I have just replaced my WiFi card from (BCM943228HMB) to BCM94352HMB. Before replacing my WiFi card i done the following:
Made computer boot in safe mode with networking.
After that i replaced the card, then booted into windows 10 (safe mode with networking) and checked device manager. Everything was OK (See attached picture). I then tried to turn on WiFi, but it does not turn on.
View 9 Replies
Oct 1, 2015
How do I find my network DVR in Network and sharing center?
View 4 Replies
Dec 16, 2015
I just bought an ASUS PCE-N53 PCI-E adapter for my PC that I built several months ago. Previously, I was just using ethernet. Put the card in my PCI-E 1 slot, and installed the drivers from the installation disc, but nothing shows up in Device Manager and I have no wireless option in my Network Connections settings. why it's not showing up, minus it being dead out of the box? I can't try it in my PCI-E 2 slot because my graphics card is in the way.
View 4 Replies
Jan 30, 2016
I ran into something strange this morning when I logged onto my computer: I couldn't connect to my wireless network anymore.
Fairly standard, I thought I'd go reset the router and have it be done with, but then I noticed that my phones were both still fully connected. (2 android phones on different OS versions). So my router itself wasn't have a problem, and I was still receiving internet.
I restarted my computer, as any good human being does, and the problem persisted. I then 'forgot the network' and restarted. Typing in my password again and trying to connect, didn't work.
I then remembered I had recently updated Windows 10 #sillyme (Not like I had a choice anyway x_x) So I thought maybe the driver had been updated. Nope. I even tried uninstalling the driver anyway and restarting. Nothing changed.
OK, so then maybe it's my hardware that's going bad? Luckily I have a dual boot So I booted up Ubuntu instead of windows and bam, everything is working perfectly. Absolutely no problems with connecting to my network.
Can't connect to WiFi network. I've already tried: restarting computer, forgetting the network, and uninstalling the driver. Also, it's not hardware as I can connect on the same machine using a different OS.
View -1 Replies
Sep 5, 2015
Just upgraded to Win 10 and kept losing internet access. After troubleshooting my home network is now named "Network 2". How do I change the name to "Network 1 "?
View 3 Replies
Aug 20, 2015
I upgraded to Win 10 with 2 computers and my WIFI network worked with my printers and even a third computer not at that time upgraded. Yesterday I upgraded the third computer to Win 10.
I noticed that the name shown for my WIFI network was changed on the computers after another update on the software. Now I cannot get to my printer on my WIFI networks!
I called forWin 10 support and aafter waiting 1 1/2 hours goot to talk to a live person who told me they would charge me for fixing the problem! I told him that I had not installed, changed anything and he said it must be in my computer and they wanted to charge me - they were not "forcing me" I asked to talk to a supervisor and he gave me a number to call that went to a OLD peoples health support number!
Is the answer to change operating systems?
View 3 Replies
Sep 19, 2015
Whats going on with my tablet (WinBook). I've installed W10 few weeks ago since then never had any problems with it, but today I noticed I cannot connect to wifi. it's gone from Network settings, if I open "connection" icon on task bar I only see Airplane mode..Network adapter from Device manager is also gone. What to do now...
I did try this - connect to internet via Bluetooth from Lumia phone and with Intel Driver Update Utility scanned tablet, only thing it found is update for Graphics driver.. what else can I do?
View 11 Replies
Aug 4, 2015
So I installed windows 10 and everything was fine until recently when my computer suddenly disconnected from the wifi network in my house. I've tried everything and nothing working, i even tried using the the Ethernet cable and it worked but as soon as I disconnect the cable it'll have no wifi access. It's not my wifi or router because My phone and other things connect and work fine. My network just won't show up on the list.
View 1 Replies
Jul 31, 2015
Debug report attached.
debug-sc-x301-xxxx.zip
View 5 Replies
Mar 13, 2016
When I go to Settings > Network and Internet i have very few option unlike most peoples windows 10 I've seen.
I have:
Data usage
Ethernet
Dial-Up
VPN
Proxy
But in videos and friends I've seen many more options...
View 1 Replies
Nov 22, 2015
I have a Lenovo Y470 that I upgraded to Win10 about a month ago. All worked fine until today when the WiFi randomly disconnected. Now I can't even detect my network (yes it is broadcasting the SSID). I can see my neighbors networks.
My other devices can detect and connect to my network fine. I've tried rebooting router, renaming ssid, reinstalling network adapter, deleting the ssid from registry..
View 4 Replies
Sep 2, 2015
Ok so got a new usb WiFi adapter. I installed the driver first which I downloaded on my phone then transferred to my pc via usb cable. Have tried reinstalling multiple times, still won't work. I'm guessing the problem is there's no win 10 drivers for it. NOTE: I did have a old usb adapter working with no driver before but not even that's working even with drivers uninstalled. The new adapter shows up in device manager with a problem indicated with a code 10.But not in network devices.
View 1 Replies
Apr 1, 2015
My laptop pulled down the latest Technology Preview a few days ago and now my Wi-Fi is totally messed up. I cannot even open the network settings from the task bar icon.
View 1 Replies
Sep 5, 2015
Under Network & Internet i cannot see wifi although wifi adapter is installed and showing that it is working properly.
View 1 Replies
Dec 5, 2015
OS: Windows 10 Home, 64-bit
PC: HP Pavillion g6 notebook
Network adapters: Ralink RT5390R 8-2.11bgn Wi-Fi Adapter (Date: 5/18/2015, Version: 5.0.57.0), and Realtek PCle FE Family Controller (Date: 4/01/2015, Version: 9.1.401.2015)
Problem: Every once in a while, I'll lose my internet connection. When I click the wifi icon on the taskbar, there will be no networks listed. The only way to fix the problem is to go the Device Manager, disable the Ralink Wi-Fi Adapter and then re-enable it. This fixes the problem anywhere from a of couple minutes to a couple of hours, then it happens again.
Solutions I've tried: I've tried doing a system restore but it failed and there are no more restore points. I've tried uninstalling the Ralink driver, downloading a new copy, and reinstalling it.
View 10 Replies
Oct 9, 2015
Every time I try to join a wifi network, my computer crash within a few seconds. It says "system service exception" igdkmd64.sys in the bsod. So I just cant connect to the internet anymore.. im on my phone right now.
Windows 10 from win7
Intel core i7-3610qm
Intel centrino wireless-n 2230
View 6 Replies
Nov 24, 2015
I have internet service from AT&T which worked great until I updated to windows 10. My pc now connects to the wifi just find, I can download updates, but I can not browse a web page. When I go into open a web page I get an error that the page can not be displayed. If I vpn to my work it works just fine then. I have reset the browser settings, created a new account on my pc and nothing has worked.
View 6 Replies
Nov 27, 2015
I have no wifi after upgrading to Windows 10 from Windows 7. Looking at Device Manager, I believe my Network Adapter is Intel(R) 82578DC Gigabit Network Connection. Looking online, I do not find a driver for Windows 10.
View 4 Replies
