Sometimes when I'm gaming online my connection gets lost and my wifi gives me no internet signal but there is internet on my other devices, I solve it by clicking on airplane mode twice (on and off again ) then the Internet comes back . Is there a permanent solution to this ?
View 1 RepliesI even went to the point going to the configure in Network Adapter Settings > Configure > Ticked off Allowed The Computer To Turn Off This Device To Save Power
It worked For 15 minutes or so, then the Wifi kept on dropping out, I've Restarted and Done All The Router Stuff, That Other Blogs Suggested, Still Nothing, Wifi continuously Drives me insane, now it drops to 2 bars of signal all the time.
I also did ipconfig/ flushdns and that didn't work either, though i was hoping it would, but anyway, I have port forwarded my IP so I can play Mine Craft with my cousin, but other than That, why it just drops constantly in wifi signal all the time.
What I can do to get it staying 5/4 bars signal Strength and not drop when I'm watching Netflix or playing Mine Craft or Battlefield 4 Multi Player. what else I can do, if they need my Wire Less info/name of it, it is
Intel(R) Dual Band Wireless-AC 3160
and yes it is up to date in patches and etc... it worked fine even in Windows 7 Home and Windows 8.1 Home, but as soon as I grabbed Windows 10 Home Update, it just keeps on doing this annoying bug.
I did a clean install of Windows 10 Pro x64 on my HP Pavilion dv6t-7000 laptop and now my Wi-Fi drops on me about every 10 minutes then it takes about 1-2 minutes to reconnect. I previously had Windows 8.1 Pro x64 and had no issues on this laptop and I just upgraded a few days ago.
I've installed the correct drivers too. Windows does report something when I attempt a troubleshoot .
EDIT 1:So far I ran a troubleshooting and my internet has been solid for about 4 minutes now since. It solved some gateway error?..
The problem is still there and I have NO wifi yet without it disconnecting.
Specs:
OS Name Microsoft Windows 10 Pro
Version 10.0.10586 Build 10586
Other OS Description Not Available
OS Manufacturer Microsoft Corporation
System Name COSMIC
System Manufacturer Hewlett-Packard
System Model HP Pavilion dv6 Notebook PC
System Type x64-based PC
[code]....
I installed Windows 10 yesterday on 2 lap tops. Everything was fine, i could access the web. I installed it on a third one this morning. It was seeing the network but said it could not access it. I changed the password in the rooter thinking that it would ask me for the new password has Windows 7 does. But it did not.
Now I also have the same problem on the 3 lap tops. I cannot find the place to put in my password like I did on Windows 7. If I try to access 'manually' it does not recognize either. I know it is not my rooter because I was able to access the new password with an old lap top still on Windows 7 and also with my cell. So password and rooter work fine.
My laptop is for some unknown reason not connecting to the internet via wifi or ethernet. It will also not diagnose the problem as it says The Diagnostics Policy Service is not running and it cannot fix it.
View 4 Replieswindows 10 installed major updates this morning now I cannot get onto the internet via my range extender this has always been intermittent in the past but could get it to work eventually I have run the connection diagnostics and its telling me there are components missing and will not connect?
if I move rooms so that I am directly linked to the router instead of the extender everything works fine.
I recently upgraded to windows 10. i started having a series of problems but they eventually fanned out but I still am unable to connect to the internet via wifi. I have to use the ethernet cable.
View 2 RepliesI'm connected to the WiFi, but I can't access the internet. I was trying to fix my rocket league connection so I followed this tutorial to reset the internet options of internet explorer and then to restore the options. I restarted my pc and now I can connect to my WiFi but none of my browsers or applications can access the internet.
View 3 RepliesAfter the free upgrade all worked properly, then i did a clean install (format) with a bootable usb that i made from media center. 6 days now no Internet connection, no wifi option. I think its the common problem with Wifi on Wos 10. As you realize i have only the windows files in my hard drive, the driver for my wireless adapter (Airties 2410) and the intel management center driver. I tried everything from the many possible solutions but not luck for me, even installing older drivers for my wireless adapter.
View 2 RepliesMy printer showing offline, how to switch to online? printer is on and have strong WiFi signal ....
View 1 RepliesI have a workstation with wifi connection. It has worked flawless with Windows 7.
When I did a clean windows 7 install and upgraded to Windows 10, the signal strength varies extremely. Even with two meters between router and wifi card, it might loose connection.
I have tried two netcards and two routers. No problems before, huge problems afterwards.
Yooooo! I have a Lenovo Y510p with modified BIOS so I could replace the crappy Intel wireless card that came with it (Intel Centrino N2230) for an Azurewave - Broadcom 4352. The experience has been good so far, the only problem I'm having is the low wireless signal with the card. I have other laptops that have higher range and strengths on the same place with older cards.
I've tried verifying (and even swapping) the cables and noted no difference. I asked on another forum and they told me that it could be that the card is not receiving enough power, but I have yet to find a settings in the BIOS or in Windows that dwindles its performance. I have recently updated the driver from Lenovo's website and it didn't improve a bit. How to improve the wireless signal?
I upgraded to windows 10 from 8.1, ever since then, my Huawei 173 stopped working. The led light flashes, yet the network signal is not showing, the display hangs and several other issue.
View 1 RepliesI have my laptop at work and have had no trouble connecting the company WiFi (they have Guest WiFi and a WiFi where you need to enter your company provided Username and Password). I have been connecting using my Username and password. Today I had to change my company login password. Now when I try to connect my laptop I get a "can't connect" message because the password saved in my laptop is no longer valid. But I can't find a place in Win10 to enter my new password.
I remember the first time I logged onto the company WiFi a Windows popup came up asking for my Username and Password (which was saved so I didn't need to enter it again - until now). This time not getting the popup - it just says "can't connect".
Running Windows 10 on a Dell Latitutde I was trying to setup a Netgear Wifi Extender because the Fios Router does not reach all the way to the other side of the house. I did the setup (so I thought) the way the manual told me and my computer was trying to connect to the extender, but it just stayed in "Connecting..." For a long long time. Eventually I gave up and thought I'd hit the reset button on the extender and try again.
Now my wifi adapter finds NO networks. All my other devices see all the networks.
The only other time this has ever happened I had accidentally hit the network adapter switch on the side of the PC, so I'm 100% sure that's not the problem and that it is 'on' in the settings. I've tried restarting the pc several times as well as toggling the adapter on/off, airplane mode on/off, and the switch on the PC on/off.. And it still sees no networks..
I have just replaced my WiFi card from (BCM943228HMB) to BCM94352HMB. Before replacing my WiFi card i done the following:
Made computer boot in safe mode with networking.
After that i replaced the card, then booted into windows 10 (safe mode with networking) and checked device manager. Everything was OK (See attached picture). I then tried to turn on WiFi, but it does not turn on.
But I'm currently browsing the internet and typing to you.
In fact - I can do virtually everything (League; Steam; Skype; etc) except use any OS feature that requires logging in -
e.g. Mail, User Accounts, Shop, etc. Then it says something along the lines of "Cannot use this service without an internet connection - please connect and try again." When I run Network Diagnostics as the prompt recommends - it says I am connected and cannot find a problem.
It doesn't always happen - but it seems to be determined on start-up. If I restart it now it might be working next launch - but 75% of the time it will encounter the same issue. It's been happening for months now but I've sort of gotten used to using my phone to check my emails - but I've now encountered an issue with one of my hard drives being unable to be searched (tried indexing, etc) and the only step I've found that I haven't tried says it could be a corrupted user account - but I cannot update my user account without "connecting to the internet". -_-
The system is up to date. No driver updates available.
Tried to connect to Wifi today and couldn't find how. When I searched for online assistance I noticed that it directs you to the settings and then the network & Internet tab.Except I don't have that tab in settings. Mine is only Network.
View 6 RepliesI logged onto my laptop as usual this morning and opened up Firefox. However, on trying to open a website it responds as of I'm not connected. My WiFi says 'no Internet, secured'. I tried the mac and it has the same connection issues, but for some reason I can use the WiFi on my phone alright?
View 3 RepliesI am unable to get on the internet via my wireless wi-fi network since a Win 10 update was pushed out to me yesterday, 12/16/15. I get a message to the effect that it took too long to log into my wi-fi.
I first upgraded to Win 10 from Win 7 about 2 months ago on my laptop. I experienced no issues until I was forced to reboot yesterday morning. It took about 5 minutes (or so it seemed) for the updates to install. Since then, every time I try to go to the internet, it times out regardless of which browser (Chrome, Firefox, Opera) I try. All other devices in the house connect to the wi-fi network okay, so the problem is not with my network.
I tried the suggestion that involved typing "REG DELETE..." in the command line, but that did not work
When I go to Settings > Network and Internet i have very few option unlike most peoples windows 10 I've seen.
I have:
Data usage
Ethernet
Dial-Up
VPN
Proxy
But in videos and friends I've seen many more options...
So for about 2-3 months I've been running hardwired Ethernet internet instead of wifi. I keep my Dell plugged into my tv. The other day I tried to move it and use wifi in another room but I have no option. When I first started with Windows 10 on release day I was using wifi with no problems and when going the Ethernet route it was always plug n play when you going to wifi vs wired.
1. Even after unplugging the Ethernet cord the symbol doesn't change to a wireless symbol the Ethernet symbol just has a little red box.
2. Tried turning airplane mode on and off as well as full pc reboot
3. Right clicking internet from the bottom right of the screen image and clicking open network and sharing doesn't give any wireless options
4. I've tried troubleshooting also with Ethernet unplugged and no success.
So just to repeat Ethernet works perfectly. Wifi used to work. My roommate who also is running the same version of Dell wifi works perfectly. Same account and everything.
The only thing I can think of is the pc updated one day as I have automatic updates and it wiped the driver maybe.
I have a brand new Dell computer with factory installed Windows 10. Unable to connect to Wifi. Shows "Limited" connection.
View 2 RepliesInitially windows 10 was running fine until suddenly (I'm using Chrome) errors such as "DNS_PROBE_FINISHED_NO_INTERNET" started occurring, while periodically the wifi kept disconnecting . After searching for and following some solutions this issue was fixed however now the internet is very slow. Admittedly I'm not technically adept at all however I believe something I changed may have made the wifi slow. I did the following things:
- Cleared chrome's cache
- Changed the DNS to google's 8.8.8.8 and 8.8.4.4 (which I am currently using) from the default (IPv4)
- Tried to update network adapter drivers (said there were no new versions when using the 'automatic search')
- Used cmd to run commands such as "ipconfig /flushdns"
- Tried performing a clean boot
- Also followed these instructions [URL] ....
On [URL] ... download speed is 0.39mbps. Upload speed is 3.75mbps. Ping is 8ms. I use fibre so previously it was very fast.
If this problem can't be resolved I'll just have to go back to windows 8.1, the internet is unbearably slow.
Under Network & Internet i cannot see wifi although wifi adapter is installed and showing that it is working properly.
View 1 RepliesI have internet service from AT&T which worked great until I updated to windows 10. My pc now connects to the wifi just find, I can download updates, but I can not browse a web page. When I go into open a web page I get an error that the page can not be displayed. If I vpn to my work it works just fine then. I have reset the browser settings, created a new account on my pc and nothing has worked.
View 6 Replies