I have just replaced my WiFi card from (BCM943228HMB) to BCM94352HMB. Before replacing my WiFi card i done the following:
Made computer boot in safe mode with networking.
After that i replaced the card, then booted into windows 10 (safe mode with networking) and checked device manager. Everything was OK (See attached picture). I then tried to turn on WiFi, but it does not turn on.
I have a HP pav 500 something or other and it cannot keep a stable connections ( for more than 2 seconds) to my wifi. The wifi card is a Qualcomm Atheros AR9485 802.11b|g|n WiFi Adapter and always worked well before i installed Win 10.I got fed up tryin to fix driver issues so i bought a usb wifi card. It is ment to relay 150mbps but mannages 1-2 Mbps. i have speed tested my phone on wifi in the same location as my HP pc and my phone recieves 35Mbps.i have tried updating the drivers but all seem up to date.
View 2 RepliesI have my laptop at work and have had no trouble connecting the company WiFi (they have Guest WiFi and a WiFi where you need to enter your company provided Username and Password). I have been connecting using my Username and password. Today I had to change my company login password. Now when I try to connect my laptop I get a "can't connect" message because the password saved in my laptop is no longer valid. But I can't find a place in Win10 to enter my new password.
I remember the first time I logged onto the company WiFi a Windows popup came up asking for my Username and Password (which was saved so I didn't need to enter it again - until now). This time not getting the popup - it just says "can't connect".
Running Windows 10 on a Dell Latitutde I was trying to setup a Netgear Wifi Extender because the Fios Router does not reach all the way to the other side of the house. I did the setup (so I thought) the way the manual told me and my computer was trying to connect to the extender, but it just stayed in "Connecting..." For a long long time. Eventually I gave up and thought I'd hit the reset button on the extender and try again.
Now my wifi adapter finds NO networks. All my other devices see all the networks.
The only other time this has ever happened I had accidentally hit the network adapter switch on the side of the PC, so I'm 100% sure that's not the problem and that it is 'on' in the settings. I've tried restarting the pc several times as well as toggling the adapter on/off, airplane mode on/off, and the switch on the PC on/off.. And it still sees no networks..
When I boot up I cannot get connected to my WiFi. The only way to get it to work is to shutdown and boot up again, then all is well.
I never had this problem until Win 10 upgrade.
When I first installed Win 10 it was working great got my wifi connection working and everything now it seems I cannot get connected. I have tried several times, putting it mildly. I put in the Modem/router address and password and then I go to the site that shows you the wifi connections and mine is not there. But there are about 10 or 12 that are there. I have tried this several times like I said. And I have rebooted to see if that did anything and it made no diff.
It seems from some of the reading I have done this might be a problem caused by an update. It worked great for several days. And while I am thinking of it can you delete all those other wi fi addresses some how.
Product Name: Hp Omen 15
Operating System: Microsoft Windows 10 (64-bit)
Wifi card: Intel Wireless-N 7260
since some days my wifi has stopped working.If I click on Wifi icon it shows only ONE (max two) NETWORK:And I live in a building with 20+ networks, as you can see from WiFi Analyzer (I'm the red one on the right).If I deactive/reactive Wifi with fn+f12, it goes to Airplane mode and to Wifi mode again and it eventually shows all the networks/My Wifi is on the top. If it's saved, Windows connects to it and then it drops the connection; if it's not saved and I try to connect, it says "You're not able to connect to this network".The fun fact is that after some seconds every network disappear and only one is showed (probably the neighbour one..I dunno).
I've already tried to HARD-RESET the notebook keeping the power button for 10/15sec with the laptop turned off.I've already tried to follow these instructions [URL] ... updating drivers (Intel 18.12.0.3, 18.12.1.2, 18.30.0.9 [Windows 10 default], 18.32.0 [Lastest drivers]) with no success. Everytime I install a new drivers, I uninstalled the previous one + Wireless software + reboot.
I tried to uncheked "Allow this computer to turn off this device to save power" on my Wifi hardware settings without success.The HP Network support says I didn't choose a Wifi (Really? The problem is I don't see my Wifi on the list!).This is not related to a new Windows 10 upgrade since I've installed it months ago and It's the first time I've this problem :/ It always worked
I tried different settings too/I changed channel, I set 802.11g on my router, APSD off on the router.I set "Magic packet off, ad hoc QoS off, U-APSD off, fat channel off,incremental throughput off, HT mode off" on the card setting without success. Nothing chaned.The Hardware test doesn't detect any failure. If I go close to the router, it shows my network with full power connection and it connects to it. Then I go back to my bedroom (probably 3/4 meters far), it KEEPS the connection for 30/40min and It drops the connection and I can't reconnect to it anymore. It always worked perfectly in my room in these months (I bought it in March 2015), so the distance is not a problem, I'm 6/7m far from the router.In this case It shows my Network (Connected) and the neighbour network...and the other 20+ networks???
The only way I have is USB tethering with my Nexus 5.I tried the Wifi connection on Elementary Freya (Ubuntu linux based OS) and it shows 20+ networks available on the list. It has not connection problem with my Wifi, but sometimes it stops working, the webpages stop loading and I must reboot Wifi to reconnect to it (usually after 30/40min using it).What's the problem? Is my Wifi card broken?
I have been using this version of windows 10 from last 1 month. I installed all the drivers and everything was working just fine. From last few days my wifi driver isn't responding. I tried reinstalling the driver but the problem still exists.
I can connect through the Ethernet cable and the Bluetooth driver is also working. Only the wifi driver has stopped.
My laptop is Dell inspiron 5520
I just installed the TP Link T6e 1300 WiFi adapter card and everything was ok until I noticed that all my applications are launching in 32-bit instead of 64-bit. Some programs won't open, but are "running" according to task manager in 32-bit. Is there anyway I can troubleshoot this?
OS:
WIndows 10
Expansion Card:
TP Link T6e 1300
MB:
ASUS P8 z77-v lk
I have internet service from AT&T which worked great until I updated to windows 10. My pc now connects to the wifi just find, I can download updates, but I can not browse a web page. When I go into open a web page I get an error that the page can not be displayed. If I vpn to my work it works just fine then. I have reset the browser settings, created a new account on my pc and nothing has worked.
View 6 RepliesI have no wifi after upgrading to Windows 10 from Windows 7. Looking at Device Manager, I believe my Network Adapter is Intel(R) 82578DC Gigabit Network Connection. Looking online, I do not find a driver for Windows 10.
View 4 RepliesAll of a sudden I get "your device does not support Miracast" and wifi is gone !
I don't want Miracast.
Acer Laptop;was win 7 on it had upgraded to W 10 Pro and was using wifi until now ?
i have tried connecting to my school's apartment however it always goes to no connections are available and then airplane mode and shows connections are available. the Wi-Fi connects just fine in all other areas of the school byt not in my apartment. The apartment is located inside the school and there are a couple of access points. I can connect to my friends Wii-U just fine but not my laptop? And when I troubleshoot, it says "Problem with router or access point.
View 1 RepliesI've installed windows 10, but I've got a strange problem. My WiFi connection randomly gets limited for one second. It isn't so bad, when I'm browsing, but if I wanna download something... that's terrible :S 'cause when the wifi stops, the download stops too... What can I do? I think it's not my laptops problem, because before win10 - on windows 8.1 - it worked fine. If it matters something, it gets limited in about every 5 or 10 minutes.
View 9 RepliesI was wondering if it's possible to utilize both WiFi and ethernet in tandem. I'm pretty sure some of you are going to tell me that I can only access the internet through one of these, up to my bandwidth limit, but that's not what I mean.
I'd like to access the internet through my WiFi connection, yet have a wired connection through my router to access the files on the other computers in my house.
I have a brand new MSI QE62 apache pro, and I just installed an update to windows 10 (the computer came with win 10, so i cant revert back to 7 or 8) and after the update, I no longer have a visible wifi adapter in my network settings, and i obviously cant connect to wifi as a result.
View 2 RepliesTitle says it all.
View 5 RepliesI knew I should've never installed windows 10, but I decided to since it's free and all. When I successfully installed it and tried to connect to wifi, it didn't work. My wifi has small range (so people don't guess the password and use our wifi), but large enough for our whole house. I got right next to my router and it still didn't show up on the Wifi List.
View 1 RepliesMy PC would be connected to WiFi, but I wouldn't be able to go on any site. I restarted my PC and the damn thing locked up on the HP logo screen! So I had to hold the power button to turn of my laptop.
View 1 RepliesI don't really know how to say this but my wifi wont turn on, when I diagnose the driver it says I need to turn the wifi button thing on but this laptop doesn't have one so how do I enable wifi without the button
View 9 RepliesI upgraded my friends HP laptop to Windows 10. The issue now is I can't enable Wifi. The card is recognized correctly in Device manager and no issues is found with it. It looks like it is fine. However in the Network Settings WLAN is set to "Off" and when I try to turn it on it always jumps right back to off. eg. I can't enable it.
HP clearly state any laptop bought prior to specific date in 2013 will not get any driver updates from their side for windows 10. And updating through device manager only tells me it's the newest driver available.
The Wifi card i Broadcom 4313GN card. I searched for win 10 drivers but did not find anything.They only offer linux drivers on their homepage...
So any solution to the issue or link to a win 1' driver for this wifi card?
Sometimes when I'm gaming online my connection gets lost and my wifi gives me no internet signal but there is internet on my other devices, I solve it by clicking on airplane mode twice (on and off again ) then the Internet comes back . Is there a permanent solution to this ?
View 1 RepliesI purchase my laptop last March and was running 8.1. I upgraded to 10 and am now having issues with wifi being connected and then losing wifi connection for only outlook and micorsoft edge. I can still access the internet through chrome or internet explorer. I have call Microsoft twice and they have not corrected the problem. I took the laptop back to Micro Center and they could not find any issues. The first session with Microsoft the technician removed some temp files and ran a malware program, which seemed to fix the problem, but the fix only lasted an hour or so. Wifi will come back by waiting for a while or by shutting down or by signing out and signing back.
View 5 RepliesThis just started happening only a few days ago, I'm not sure what might have caused it, but my laptop will suddenly disconnect from my wifi network. sometimes it won't disconnect, but just stop receiving/sending packets. I can tell this because suddenly my pages are stuck loading and skype is trying to reconnect, but nothing happens until I manually disconnect.
I have tried Troubleshooting. But I usually get "Your proxy setting could not be recognized" or something, even though I don't have any proxy settings.Uninstalling and then reinstalling the latest driver for my wifi card. Disabling power saving for the wifi card as talked about here. Everything mentioned on the Microsoft page here
Ethernet works fine. I can connect my phone to wifi and tether it to my laptop, so this shouldn't be a problem with the router.
I don't know how it happened, but for some reason the wi-fi icon on my Acer laptop is now greyed out and when I click on the internet icon to display available connections, there's nothing there.
I'm attaching a screenshot ...
I've been trying to make a PE image and it is working fine. I can add programs (Macrium, PaleMoon, Explorer++) and it works fine in VM (through virtual Ethernet). It also works booting it from USB.
What I can't do is make WiFi work when booting from USB. I need this as I don't have Ethernet at all on my laptop.
I've tried adding the various drivers but can't get it to work.
This is what I have done so far for WiFi:
Code:
# Add any device drivers (.inf files) - this folder contains BroadcomWirelessWin8x64
Dism /Add-Driver /Image:"$WorkDirmount" /Driver:"$HomeDirDrivers" /recurse
# For Wifi - http://www.msfn.org/board/topic/162453-winpe-40-enable-wireless-support/
Dism /Add-Driver /Image:"$WorkDirmount" /Driver:"$env:SystemRootInf
etnwifi.inf"
Dism /Add-Driver /Image:"$WorkDirmount" /Driver:"$env:SystemRootInf
[code]....